Where is the burn and dodge tool in elements 12?

Where is the burn and dodge tool in elements 12??

Should be like version 11.  It is on the left in Expert.  Look in the Enhance block.  It can show up as Dodge,
Burn or Sponge.

Similar Messages

  • Burn and Dodge tools not working on b/w sketch scan

    Hi, I may have somehow eliminated information in an image of a black and white sketch which prevents the dodge and burn tools from working...is there a common mistake which prevents these tools from working as they normally should on a black and white image with multiple shades? (The sketch is not pure black and pure white but has multiple gray shades...it "looks" like an image on which these tools should work.)
    When adjusting Levels for the image all of its "information" seems to be clustered around the "0" point on the far left of the Levels adjustment slider, if that helps in understanding this problem....
    Did I mistakenly somewhere along the line destroy information in this image necessary for these tools to work?
    Thanks in advance

    > it would be nice if dodge and burn worked on partially transparent images. This is impossible?
    It is working properly. With a partially transparent layered image, only **some** of the visible tone is coming from the image layer. The rest is coming from whatever is showing on the layer underneath. Burn and dodge will only affect the layer you're working on. As I said, I could get get B&D to affect it a little ... and that's is exactly what it should do in this case. Because the pixels are partially transparent, B&D is only going to **partially** affect the visible tone. It's altering the pixels on the image layer, just not very much because there aren't very many pixels available.
    Peel off white does an incredible job. However, I would use it only once. The fact that the sketch becomes a bit transparent tells you it's removing image information.

  • Looking for the burn and smudge tools in photoshop 8.0

    Hi,  I have been using Photoshop 4.0 and loved it.  Got a new computer and had to change to Photoshop 8.0.  I can't seem to find the burn or smudge tools I used in the 4.0 photoshop.  Is any one familiar with this problem?

    Assuming you mean Photoshop Elements 8.0, then they are located under the Sponge and Blur tools, respectively.
    Burn Tool:
    Smudge Tool:

  • Burn and Dodge issues in CS2

    I'm using Photoshop CS2 and I'm learning how to use it. I'm taking a photography class and my instructor was telling us about the Burn and Dodge tools and showed us some techniques. I can't seem to get the burn and or dodge tool to work. I feel pathetic and it's probably something simple that I'm not doing, I was able to use the tools on another computer at my school.
    Any help would be great.

    Brush size is fine and the exposure is fine. The tools are not doing anything, there not burning or dodging, nothing is happening. I also tried using a brush, nothing is happening too. I don't know if that has something to do with the burn and dodge tools.

  • Can't locate burn or dodge tools

    I am using PSE 3 and used their help file to locate how to use the burn and dodge tools but they are not on my toolbar. Any idea how I get to them?
    Using Windows XP professional on Toshiba laptop.

    I have my toolbar in a single column view, but it's all the way down at the bottom. The default is to the Sponge Tool, but click and you'll see Dodge and Burn available as other choices.

  • Installed 2.2-  Now my burn and dodge doesnt work!  Help!

    any suggestions? The burn and dodge really doesnt change anything now when i brush over an image even at -4! Any ideas!

    Flow? Density?

  • Why is the panarama function in my Elements 12 not active? Also, how do you burn and dodge?

    Why is the panarama function in my Elements 12 not active? Also, how do you burn and dodge in Elements 12?

    It sounds like you aren't in Expert Mode. Click the word Expert at the top of the PSE window to go there.
    For burn and dodge, click the Sponge tool and you'll see those tools in the tool options at the bottom of the screen:

  • Where can i find the zoom and pinch tool in New Adobe DRAW App

    Hi People
       Dose anyone know where i can find the zoom and pinch tool in adobe draw?
    On adobe ideas it was on the tool bar with the pan icon that looks like a hand and the cross icon for the zoom.
    Just wondering if Adobe put it in the new Adobe Draw program, i hope so, its hard to get detail with out the zoom tool.
    Best, Phil

    Oops Sorry Jumped the gun again! i found out how to do it. I was using my jot touch styles which mean you have to hold down the icon on the upper left with the styles then use your fingers to do the pinch and zoom gesture to make it work

  • Why is the cloning and healing tool in lightroom 5 no longer showing the stamp where it is replacing from?

    When I use the cloning and healing tool it used to show a stamp indicating where it was replacing from. It suddenly stopped working. I can still remove spots but cannot move it around to see where I could use alternate space to clone or heal.

    The source should show on both Heal and Clone.  Hit the H key to turn them off and on or pick one of the options in the Toolbar.

  • Acrobat Reader DC: Find the hand and select tools

    Here is a problem and a solution. In Adobe Reader DC you may want to use the hand tool and the select tool. But you won't get them to show in the main toolbar, no matter how deep you dig in the Show/Hide menu.
    SOLUTION: hover your mouse in the lower part of the screen to show the Page Control tools. That's where you'll see the hand and select tools.
    The complete steps are:
    1. Click View > Show/Hide > Page Controls, and make sure that Show Page Controls is selected.
    2. The page controls will appear either on your toolbar or at the bottom of the screen.
    3. To move the page controls to the bottom of the screen (or back to your toolbar), click the icon that looks like a bar with a downwards arrow.
    4. You will only be able to see the hand and select tools when the page controls are at the bottom of your screen.
    Adobe, I usually love your software, but I spent a half hour looking for a hand icon. Frustration.  >:-((

    OK.
    H to get the hand tool, and
    V to return to the selection tool.
    For a list of keyboard commands for Acrobat Reader 6 click Section Four: Using Keyboard Commands
    And Sara, please tell them to write a complete manual for DC soon.
    Thanks,
    David

  • Why do the brightness and contrast tools disappear

    I just finished developing a set of photos. When I went to my next set, some of the functionality was missing namely the brightness and contrast tools. I am using lightroom 5. Why is this happening?

    The images where brightness and contrast sliders are available were probably imported into Lightroom in an earlier version (probably Lr3). Back then the adjustment sliders were built around 'Process Version 2010'. When Lr4 was launched it included an updated and significantly more flexible set of adjustments sliders. This new set of adjustments is known as Process Version 2012, and is the current set of adjustments in Lr5. The images you try to edit that don't have access to brightness and contrast were probably first imported into Lr4 or Lr5. You can read more about PV2012 here Adobe Photoshop Lightroom 4.0 Feature Overview The overview also provides information on how to convert back and forth between PV2010 and PV2012.

  • Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool

    In both Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool with horizontal images. Im running Lightroom on a Quad-Core Intel Xeon Mac with 32 GB of memory with OS 10.8.4, this problem has gotten worse and worse to the point where the crop tool is unusable. Please help!

    Alright,
    no replies so far! Anyways, here's some more information which is leading me to the conclusion that the bug causing the effect described above is a combination of Apple's SMB implementation of Mavericks and the way Lightroom is actually using SMB network access:
    I did another trial by connecting a USB hard drive to the USB port of my router (Netgear). The connection is quite slow, but moving one of the folders in question (see my 1st post above) to the shared drive connected to the Router made Lightroom on my Windows machine to see the photos again, when I told Lightroom where to find the moved folder!
    Everything was working as expected, on the Windows machine again! Moving the folder back again to the Mac Mini fileshare was causing Lightroom on the PC to get blind again for the pictures trying to sync or import. However, accessing and modifying a photo was possible again, like it was before the trial. So it's only the sync and import function having a problem!
    I also did some trial in re-building ACLs and access rights on the file server with no luck. So there's got to be a functionality in sync and import of Lightroom which is using a certain SMB feature which is not supported by Apple's SMB implementation!
    Any thoughts or hints?
    Thanks!

  • HP Photo Creations - where's the text and graphics tabs?

    I downloaded V 3.5  HOwever I can't seem to find the tabs for text, graphics, etc. All I can find is touchup, crop, red eye, and one or two others. But where is the text and graphics, and the other cool ones.?  I'm sure I downloaded 3.5.
    melodee007

    Hi Melodee.
    The additional editing tools appear with collage projects. When you choose basic prints, you'll see only the touchup tools (crop, image adjustments, red-eye, airbrush, tint).
    In other words, to add text, borders, and graphics, choose Collage Prints instead of Prints. This link will take you there:
    Collage Prints
    There are quite a few cool effects in the touchup section, though.
    Under Image Adjustments, click Advanced Controls at the bottom of the screen to try the Posterize effect.
    Under Airbrush Effects, try the Rub Through, Blur, and Monochrome brushes. 
    Rub Through loads a photo in the background that's slowly revealed as you paint over the original photo. Blur is good for toning down distracting elements in your picture, making a snapshot look like a photo taken with a fancy lens. The photo below uses both those plus the Monochrome Brush.
    Hope this helps,
    RocketLife 
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

    With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
    Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
    Does anyone have a solution?
    Thanks in advance.

    Thank you very much. I'll be waiting for you message.
    Messaggio originale----
    Da: [email protected]
    Data: 26/01/2015 17.56
    A: "Umberto Gangi"<[email protected]>
    Ogg:  How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        created by Gilad D (try67) in Creating, Editing &amp; Exporting PDFs - View the full discussion
    Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
         If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
         To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, &amp; "Stop Following"
         Start a new discussion in Creating, Editing &amp; Exporting PDFs by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Where are the plus and minus keys on a Pavilion dv6-3150us Entertainment Notebook?

    Where are the plus and minus keys on a Pavilion dv6-3150us Entertainment Notebook?  Joe
    Joe B.

    Its on the keyboard somewhere on top center close to the number keys. To be straight, its just below F12 key. 
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

Maybe you are looking for