Where is the channel width setting?

I'm trying to optimize my Airport settings for a wide range of devices and learned from this Apple Support Article about "Channel Width."
http://support.apple.com/kb/HT4199
It's frustrating to see such references in these articles yet find no corresponding setting in Airport Utility. We have a fourth generation TC and the article was written in Nov, 2011, so they should correspond. Our AU version is 5.5.3 and there are no available updates from within AU or through general Software Update. Could there be a firmware update not available through these channels? I'd appreciate any help solving this little mystery.

The guide line..
Recommended settings for Wi-Fi routers and access points
Is to cover all brands of routers and indeed correspond exactly to what Apple preset their own products.
Apple is biased in certain areas and other manufacturers do allow other settings than Apple recommends. Wireless in some ways is yet an infant technology still ruled by much voodoo and need to offer suitable numbers of chicken livers to the gods of ether.. and even with Apple products where so many controls are hidden or non-existent.. it doesn't always work as it should. We are on the way to wireless nirvana!! IMHO the journey is endless. No sooner will a solution be found to a problem than a new one will crop up. If it works as it generally does.. without wires.. be thankful.

Similar Messages

EA2700: Unable to set channel width setting for 5Ghz

Hi,
I am trying to set 40MHz as the channel width for 5GHz network on my Linksys EA2700 and it always remains in "auto"! Am running the latesting firmware. Also i tried factory reset->Restore and set again.
No luck! any suggestions? Did it work for anybody?
Thank you

Thanks for the info. My 5GHz is set in 'N' only mode. When I set the channel to 161 it displays 40GHz however the speed drops to 30Mbps after a minutes.
How was your experience?

Where is the option to set a ToDo item to repeat? ...

I imported some calendar entries from MS Outlook onto my 5800, of which most were set to repeat every month.
Those items successfully repeat on the device but on creating a new ToDo item using the device's calendar app, there is no option to set repeating occurrence!
Where is the option to set a ToDo item to repeat?
Can anyone please help me with this as I do not want to have to keep re-creating items and / or using Outlook to create them then transfer etc.
'Ta very much.

Just found an alternative that I thought was possible but wanted to confirm.
Set yourself up a Nokia account on www.ovi.com and set up an OVI Sync account. Sync the phone to the online account to start with.
Then, using the online interface to OVI Sync you can create an event that can be repeated weekly among other things. Re-sync the phone and that repeating event will be entered into your calendar.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Where is the Application name set?

If I see the following when I view the source of my jsp page:
<APPLET CODE="com.alphablox.internal.PresentBlox" WIDTH="100%" cache_version="4.1.1.377" cache_archive="abc.client.jar" CODEBASE="/AlphabloxServer/abxclasses/" HEIGHT="100%" NAME="PresentBlox">
<PARAM NAME="BloxId" VALUE="28">
<PARAM NAME="applicationName" VALUE="test_ablox">
<PARAM NAME="SessionId" VALUE="1227311174444011490">
<PARAM NAME="ContextPath" VALUE="test_ablox">
</APPLET>
The Param name="applicationName" I want the value to be "test" not "test_ablox". How can I change that?

Where are applet tags generated??? Do the values come from properties files, or xml files? I'm working with a vendor software...not sure where these values are being set...

HP Pavilion 15-p159na - Where is the keyboard backlight setting to switch this on?

Can someone please tell me where to locate the keyboard backlight setting for the Pavilion 15-p159na laptop. I want to turn the backlights on but cannot locate this setting anywhere. Thanks.
This question was solved.
View Solution.

There isn't a setting. On the keyboard of a notebook that has this feature it is on the F5 key. It is the lit key in the following image from the keyboard of my current HP Product loan. It is the enable\disable backlight key.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

7.0 How to setup where is the option to set where photos come from?

Since I uploaded to 7.0 I no longer see the option to set where my IPOD should look for photos, I do not noty see a photo tab of any kind. How do I do that with this 7.0?

here's a link to a screenshot of where the Photos tab
shows up for me in 7.0.1.8:
b's view of the photos tab
in 7.0.1.8
Only thing is you have to have the IPOD hooked up in oder to get that options. I got that options before (before I upgraded) without having to pluge in my IPOD. Ok so thats the difference. Thank you...

Where is the http proxy setting?

I need to set a proxy setting in order to browse internet over a wifi connection. I searched over the settings but couldn't find where to set the proxy. Where is the setting located?
System: ZTE Open, Firefox OS 1.1 stock.

hello rolando, the proxy settings are available under'' firefox > options > advanced > network > connection''.
[[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption]]

Where did the channel go?

Sometime last night, about 9:30 I'm guessing, channel 474 WETA UK just started playing something completely different. It continues this morning. Did anyone else experience this? Where did that channel go?

nets4ever wrote:
Does anybody now when the NBA channel coming? I look today and now its gone all together!!!!! What {please keep your posts courteous} is going on...just put the {edited} channel on already VERIZON!!!!!!!!!!
Message Edited by KaLin on 02-04-2009 01:29 PM
I guess the same place the other "Coming Soon" channels went to. I am wondering what happend to all those in the November guide that has not been updated, but have vanished from the STB. Is the economy so bad that we can not get what was promised? Last I looked we are still paying. I guess it depends on what coming soon means to you. Kinda like it depends on what is is.

Where'd the channel strip go?

i've lost the channel strip, tool box, etc somehow, and can't get it back. can anyone help?

it's the whole left side, everything that's not the arrange window - MIDI THRU, Tool box, GM Device, and Channel Strip...it all disappeared. I've tried "view" but there doesn't seem to be a relevant option.

Where did the 'Sleep Timer' setting go?

I know this seems like a bit of a silly question, BUT:
I frequently fall asleep listening to my iPod. I've had 3 other iPods (1st and 2nd gen) which had sleep timers built in as a function on the menu. I could hook the ipod up to speakers in my bedroom, set the sleep timer, and drift off to music or books. With my new 5th gen iPod, however, I cannot find a sleep timer function anywhere. I purchased an iHome, so I can use the sleep timer function at home, but when I travel I either cannot use the iPod in this way, or have to leave the iPod running (and playing) all night long, which then actually wakes me up from sleep later in the night. Can anyone tell me if there is a sleep timer function on the 5th gen iPods, and if so, how do I activate it?
thanks

Okay, DUH, I answered my own question. It was under the 'clock' function; I never bothered to set the clock as I was used to having the battery drain problem that occurred when the clock was set on the 1st and 2nd generation iPods. Now I know!

Where is the start time setting in CC 2014.2?

Cant find the start time setting for the timecode in my latest version of Premiere.
thanks
Phil

Found it, its in the sequence tab. rightklik and there it is.

T440s TouchPad - Tap and Drag - Where is the "locking drags" setting?

On my ThinkPad X220 TouchPad properties there is a Tap & Drap setting for Locking Drags (see below). When this is enabled you can tap twice on an item (and hold on second tap) to engage drag and then this will be locked until you tap again. The benefit of this is it is possible to use multiple discrete touchpad movements to move an item across the desktop without having to engage drag mode each time.
Link to picture
This feature is not specific to my X220. I find it on lots of laptops and I find it extremely useful.
However, on my T440s I can't find such a setting. Am I missing something?
Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums

I was looking for this setting too. It's extremely helpful when you need to select text. After googling around and finding little to no information I figured it out on my own. I grabbed my old laptop and compared the registry before and after checking the "locking drags" setting. All what you need to do is find the key:
HKU\S-1-5-21-*a-bunch-of-numbers*-1001\Software\Synaptics\SynTP\TouchPadPS2TM2668,
and change the value of "Gestures" from 3 to 7. There is another similar key named TouchPadSMB2cTM2668. I was lazy to find out what key will affect the setting so I changed the valuge of "Gestures" too. After that log out / log in again or restart. It works perfectly for me.
Hope this helps.

Where is the channels palette in Photoshop Elements 11?

Is there one? Where is it?
I'm trying to map some text over a photo so it looks like the text is printed on it, i.e., follows the contours of the photo, and I used to do it with channels. But I just upgraded to PS 11 (Macintosh) and can't find it.
Help!

Or, I'm wondering if I'm not understanding what you want to do. I took your question to mean that you want to follow the outline of an object in PSE. If you mean you want to make text look like it's painted on a brick wall, for example, in a way that follows the contour of the bricks or is printed on a rumpled t-shirt, say, you want to use the Displacement map (Filter>Distort>Displace).

HT3597 where is the command to set up voice dialing?

I cannot figure out how to set up voice dialing. YES I have a headset and bluetooth and yet I can't find WHERE to SET UP a phone number with my VOICE.

Press and hold the Home button. That will bring up Voice Command. There's really nothing to set up. You would then say, "Call <name from your contacts>" or "Call 8005551212".

Where is the channel definition stored

In LabVIEW and LabWindows/CVI, when you plug in a USB digital I/O device, the Ports must be defined as channels. Where is this information stored if I want to move a Project from one machine to another please?
While speaking of machine portability, how do I install the Professional Development System after I have installed the Full Development System? Un-installing LabVIEW FDS and re-installing PDS still leaves me with FDS, there must be registry issues. We have licences for both and I want to upgrade some lab PC's.

Hi kazinoz,
In addition to what Steven posted, you will only need to change your activation to move from LabVIEW Full to Professional. This can be done in the NI License Manager. Additional information on product activation can be found in this article.
Regards,
Kent
Applications Engineer
Digital Multimeter Home

Where is the channel width setting?

Similar Messages

Maybe you are looking for