Where is the "\" character on the touchpad of a Laserjet mfp M177fw

I just want to configure my wifi connection so I need to enter my network password. Problem is there is no backslash character "\" on the touchpad and this character is part of the network password !!
On the touchpad we see or have access to three groups of characters. There is a slash "/" with the group of alphabetical characters and an another slash "/" in the group of special characters but I have not found the backslash anywhere.
Because this the only machine not able to connected to the network I dont want to reconfigure the network interface.
Would be happy If you have a solution...

Hi @Brisson ,
I see by your post that you would like to be able to put in the \ in the password. I can help you.
I checked on the display of the printer and the only options for characters are under the @#$, which doesn't provide the \.
You would unfortunately have to change the password, if you are setting up the network through the control panel.
You can turn the Wireless Direct on and connect to that network, then setup the wireless from the printer's Embedded Web Server.
Under Network Setup, Wireless Menu, Wireless Direct, turn it on.
Connect to the printer's network and from a web browser type in the IP address (192.168.223.1) for the printer in the address bar. Click on the Networking tab, select Wireless on the left and fill in your information.
Then connect back to your network name again.
I have seen some models won't recognize special characters or spaces when setting up the network, with this being a newer model it should be fine. (@! #/)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

I want to create an intelligent file to show all pictures with 3 stars or more. Trying this, I don't know the character of the stars to fill in the respective box ??

I want to create an intelligent file in my finder to show all pictures with 3 stars or more. Trying this, I don't know the character of the stars to fill in the respective box ??
Thanks for your help.

Take a look here: http://hints.macworld.com/article.php?story=20110314131100623
One of the comments suggests you can't use greater than or less than with the star rating in Finder.
You might try a Raw Query with the kMDItemStarRating.
In the criteria popup menu, select Other, then find the Raw Query entry.
You might have to play around with the syntax, but try "kMDItemStarRating >= 3"
Take a look here for query syntax: https://developer.apple.com/library/mac/ipad/#documentation/Carbon/Conceptual/Sp otlightQuery/Concepts/QueryFormat.html#//apple_ref/doc/uid/TP40001849-CJBEJBHH

Appending the ' Character to the input.Please GUIDE

Hi,
I'd like to append the ' character to the
argument passed in my function,so that it
now looks like:
'EURO'.
I am using the flwg,but it is being displayed as EURO a
and not 'EURO'
Create or Replace Function Append(currency VARCHAR2)
AS
v_currency VARCHAR2
v_currency := ''|| currency ||'';
DBMS_OUTPUT.PUT_LINE(v_currency)
Emd;Am I missing out some quote or something?

SQL> Create or Replace Function Append(currency in VARCHAR2)
2 return varchar2
3 is
4     v_currency VARCHAR2(50);
5 begin
6     v_currency := chr(39)|| currency ||chr(39);
7     return(v_currency);
8* End;
SQL> /
Function created.
SQL> select append('EURO') from dual;
APPEND('EURO')
'EURO'
SQL>

The "delete Key" removes the character to the left, as a backspace key does, can this changed?

The "delete Key" removes the character to the left, as a backspace key does, can this changed?

Yes, hold the FN key down as you hit delete to delete from the right.

Try putting the character " in the description field (under edit/preferences/info)

Choose edit/preferences and type something in the description field under the info tab. Make sure to include the character ". Then preview the project or publish it and watch it.
I used Captivate 4 and Windows Vista when I made the discovery. It took me a while to figure out that this was the cause of my problems. Hopefully this is not an issue in Captivate 5. After what I heard the through away the old source code. Good thinking! Soon my PC will get an update from 4 to 5.
Stefan
Sweden

Ahhh yes. My bad. Indeed I do see the odd behavior! It's as if one has clicked the Info button. But there are other elements all messed up too!
Very bizarre!
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How do count the character in the given string?

hi all,
i have astring like 'AAAARAMARAOAAA'.
i want count how many 'A's in this string using sql statement.

Is that a joke? You asked that in a previous thread of yours: how do count how many 'A' s in this string using sql stmt?.
C.

The Character Pallett repeatedly opens on its own and crashes

Starting this morning I am being driven crazy by the Character Pallett launching unexpectedly on its own and then crashing almost immediately. Then it attempts to launch again, flashes briefly on screen, and crashes again. My crash log shows the same repeated process.[Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Invalid parameter not satisfying: (index >= 0) && (index < [_itemArray count])']
It's pretty impossible to get anything done. I tried reinstalling OSX combo 1.6.8, but the installer would not see my startup drive as being eligable; I then reinstalled Snow Leopard 10.6 and attempted to update to 10.6.8 that way. But this attempt lead to an error that cancled the install. So now I am running 10,6, but with many apps that require 10.6.8. And the Character Pallett keeps poping up and then crashing even with 10.6. I'm beginning to think it may be a hardware problem, either ram or logic board issue; but I lack the diagnostic skills to figure it out.
I thought of trying to launch the Character Pallett on purpose, but when I open the System Preferences and click the box that would place the Keybaord icon in the menu bar (which is the only way I know to get to the Character Pallett) the icon doesn't appear. The check mark doesn't even stick.
And help would be greatly appreciated.

Where I am so far:
1. First I should correct the term I was using. It's tje "Character Viewer" and not the Character Pallett. To access the viewer one normally opens System Prefs>Keyboard and clicks on the box saying Show Keyboard and Character Viewer in Menu Bar. Once in the menu bar, one can access the viewer via a pop down menue item. But I did not have the Keyboard in the menu bar and the viedwer was poping open on its own. I couldn't even get the keyboard menu to appear in the menu.
2. I took the advice received so far and booted into Safe Mode, trashed the plist item. The viewer popped open on its own still, but did not immediately crash. I could click on the red window controller and close the window. In safe mode I could get the keyboard menu to appear and could select the Character Viewer.
3. I removed off all my log in items—the only odd thing I noticed was the duplication of iTunes helper. At this point I still could not upgrade from 10.6 to 10.6.8 via the combo updater. So I rebooted normally, but with no log in items. The System Pref for showing the keyboard menu item still did not work. Nor could I upgrade to 10.6.8 with the combo updater. I also tried update just to 10.6.1, but got the same Installer error. But the Character Viewer popup/crash is gone, but so to is access to all the iLife apps that require 10.6.8. iTunes, for example cannot see my iPhone or iPad when they are plugged in via usb.
So I guess I should thank yuou guys for your help andnow post a new question about not being able to upgrade Snow Leopard. Perhaps there's already been a similar problem posted.

SAPScript printing of PO form in ECC 6.0 with the character #

Hi,
We had just upgraded our system from SAP 4.6C to ECC 6.0. After the upgrade, we had encountered an issue during the printing of a purchase order. Apparently, when the PO has a text with the # character, the whole text doesn't appear. However, if we remove the # character, the rest of the text is printed.
This problem only occurred in ECC 6.0. It was not happening when we were still in 4.6C.
Can you please advise?
Thanks and regards,
V

Hi Binod,
Thanks for your response. Let me try to explain the problem more clearly.
In the PO printout, we have placed there a text i.e. MN #149. When we were still in 4.6C, the text is displayed completely including the # character. But when the system was upgraded to ECC 6.0, the whole text did not appear.
Now, we tried testing by removing the # character and the PO was printed with the text MN 149. However, we still need to have # character in the PO printout.
Hope the issue clear. Can you please assist?
Thanks,
V

SQLPLUS 9.2 on Windows and the "&" character

Running Windows XP SP@ and SQLPlus 9.2
using the Insert statement and text with "&" within single quotes within the Insert Statement
The insert pauses and asks for input from the screen and removes the "&" character and the text after it.
I tried escape: "\&" with no lock..
How can I insert the "&" character within a text field delimited by single quotes?
Thanks

Type SET DEFINE OFF in your SQL*Plus session before executing the insert statement.
chris@XE> SHOW DEFINE
define "&" (hex 26)
chris@XE> SET DEFINE OFF
chris@XE> SHOW DEFINE
define OFF
chris@XE> Message was edited by:
Stain

Printing problem with the character u00D8

Hi SAP Experts,
I have a very unique problem while printing the character Ø thru the Quality Reports.
I am able to see the said character in print preview of the quality report. I am able to see the same character stored in the respective table.
But it is not getting printed on the paper when I take a print out of the report. I took print out on various printers. But result is same.
What will be the reason for such error? It is due to printer setting or SAP internal issue?
Please guide me.
Thank You
Shailendra

Hi Suhas,
Pls. refer SAP Note
Note 535936 - Printing Windows-1252 special characters
Best regards,
Prashant

The Case of the Missing Image

Go to this link:
http://fyiboerne.info/wcid.html
This page is a very simple HTML page which displays two
things: a "< GO BACK" link, which is visible and working
properly, and one jpg image (file name: wcid#2.jpg) which is not
visible.
I would love to know what is going on here.
Both the html page, and the lone image are in place on the
remote server; however, when I test the page on my testing server
it comes up blank as it does from the browser when online. I've
tried pop-up windows, a download to a pdf version of the .jpg....IT
IS ALWAYS BLANK. Moreover, I have purged the entire site and put it
back...dumped the html file and completely rebuilt it...tried
opening the pdf file and jpg file in Photoshop and Acrobat, where
the image always comes up. In Photoshop, I flattened the layers.
The image shows up in Dreamweaver, but fails to appear in a
preview (using Firefox and Safari), and fails to appear on the
Internet.
I included the source code for this link in the event anyone
can see a problem. The first source code appears on the page which
links to the page in question. The second source code is the code
from the page with the missing image.
THANKS!
HELP!

Removing the "#" character from the file name fixed the
problem. Thanks!

Could you pls give the details about the Unicode conversion during Upgrade

Hi,
Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
Waiting for quick response
Best Regards,
Padhy

Hi,
These are the few points i gathered during my upgradation project.
Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
So it is advised to keep a back-up of the existing system.
Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
Version Upgrade involves the following Steps.
Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
First copy the entire E4B system into the E1B System which is created for Version 4.7.
Apply the Version 4.7 CD provided by SAP over the E1B System.
Now check whether all the functionalities that was in E4B system works fine with E1B system also.
Thus the Version Upgrade involves two steps.
1. SAP Upgradation with the help of the CD
2. Manual Upgradation.
1. SAP Upgradation with the help of the CD
This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
2. Manual Upgradation.
This Manual Upgradation involves
2.1 Upgradation of Standard Objects
2.1.1 SPAU Objects
2.1.2 SPDD Objects
2.2 Upgradation of Custom Objects.
Upgradation of Custom Objects can be placed under the following three categories.
Unicode Compliance
Retrofit
Upgrade
Please Find below some of the common Unicode Errors and their solutions
1. Error:
In case of Translate Error; Dangerous use of Translate in Multilingual system.
Correction:
To correct the Error occurring on TRANSLATE statement use this additional statement before the Translate statement.
SET LOCALE LANGUAGE sy-langu.
This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is sy-langu, i.e. the log on language of the user.
2. Error:
In case of Open Dataset Error; Encoding Addition must be included.
Correction:
This Error occurs only when the MODE is TEXT.
To correct the Error occurring on OPEN DATASET statement use this statement instead.
OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
Where: dataset_name NAME OF THE DATASET.
Access INPUT or OUTPUT or APPENDING or UPDATE.
DEFAULT - Corresponds to UTF-8 in UNICODE systems &
NON_UNICODE in NON-UNICODE systems.
3. Error:
In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; Function module UPLOAD is flagged as obsolete.
Correction:
The FM GUI_DOWNLOAD/UPLOAD is used.
The variations to be made in the parameters of the FM:
1. Filename It must be of STRING type.
2. Filetype DAT is not used any longer, instead ASC is used.
3. Field Separator The default value SPACE is used, incase for a TAB separated file X can be used.
4. Error:
In case of CURRENCY/UNIT Addition Error; Use addition CURRENCY/UNIT when outputting.
Correction:
The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
To correct this error follow the following method:
WRITE: /3 'TOTAL',' ', TOTAL.
WRITE: /3 TOTAL, , TOTAL CURRENCY 2. --- Where 2is the Currency Key for Getting 2 decimal places.
5. Error:
In case of TYPE X Error; Variable must be of C, N, D, T or STRING type.
Correction:
We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
So the method to be followed is:-
1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
2. Declare the variable as Type C, and use the method UCCP(XXXX) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute HORIZONTAL_TAB of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
E.g.:
i) *DATA: TAB TYPE X VALUE 09, Tab character
CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
ii) * DATA: CHAR TYPE X VALUE 160.
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA CHAR TYPE C.
CHAR = CL_ABAP_CONV_IN_CE=>UCCP(00AO).
(Here 00A0 is the Hexadecimal equivalent of the decimal 160).
3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
E.g.:
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA : LF(2) TYPE X VALUE 'F5CD'.
DATA : BEGIN OF LF,
A1 TYPE C,
A2 TYPE C,
END OF LF.
LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
6. Error:
In case of the Character -Error; The Character -cant appear in names in Unicode Programs.
Correction:
The Character -(Hyphen) appearing in Variable names is replaced by the character _ (Under Score) for Unicode/Upgrade Compliance.
E.g.:
*wk-belnr LIKE bkpf-belnr,
*wk-xblnr LIKE bkpf-xblnr,
*wk-date LIKE sy-datum,
*wk-wrbtr LIKE bseg-wrbtr,
*wk-name1 LIKE lfa1-name1,
*wk-voucher(8) TYPE c.
wk_belnr LIKE bkpf-belnr,
wk_xblnr LIKE bkpf-xblnr,
wk_date LIKE sy-datum,
wk_wrbtr LIKE bseg-wrbtr,
wk_name1 LIKE lfa1-name1,
wk_voucher(8) TYPE c.
7. Error:
In case of The SUBMIT-TO-SAP-SPOOL Error; you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition.
Correction:
1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
2. Call the FM GET_PRINT_PARAMETERS:
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
3. Use the SUBMIT-TO-SAP-SPOOL statement.
E.g.:
     submit zrppt500
     using selection-set 'AUTO3'
     with res_no eq lo_rsnum
     with sreserv in preserv
     to sap-spool destination p_dest
     immediately 'X'. "print immediate
DATA: print_parameters type pri_params,
archive_parameters type arc_params,
valid_flag(1) type c.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
Submit zrppt500
Using selection-set 'AUTO3'
With res_no eq lo_rsnum
with sreserv in preserv
to sap-spool
SPOOL PARAMETERS PRINT_PARAMETERS
ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
WITHOUT SPOOL DYNPRO.
8. Error:
In case of Message Error; Number of WITH fields and number of Place Holders are not same .
Correction:
Split the statement after WITH into the same number as the place holder for that Message ID.
E.g.:
1. * MESSAGE E045.
MESSAGE E045 WITH '' ''.
2. in program ZIPI0801
     Start of change for ECC6
     message e398(00) with 'Could not find access sequence'
     'for condition type:'
     p_ptype.
message e398(00) with 'Could not find '
'access sequence'
'for condition type:'
p_ptype.
     End of change made for ECC6
9. Error:
In case of Move between 2 different Structures; The structures are not mutually convertible in a Unicode program.
Correction:
Make both the Data Types compatible and then assign the contents.
E.g.:
The statement move retainage_text to temp_text. Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
10. Error:
In case of no description found; add a GUI title.
Correction:
In this type of error gui title is generally missing so add a GUI title to the module pool.
11. Error:
In case of writing internal or transparent table
Correction:
Write individual fields.
E.g.:
WRITE: / EXT. --> EXT should be a character type field
WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
12. Error:
In case of combination reference table/field S541-UMMENGE does not exist
Correction:
Was due to error in reference table S541. TABLE S541 has errors
1)Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)
2)Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)
Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
And that of ZMKCODE (from ZACCODE to ATTR8)
13. Error:
In case of KEY does not exist
Correction:
The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
14. Error:
Incase of WRITE statement, Literals that take more than one line is not permitted in Unicode systems.
Correction: To correct this error, we need to align the spaces accordingly so that the statement doesnt go beyond the line.
15. Error:
Incase of Data statement, The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect..
Correction: To correct this error, instead of like in the Data statement, use type.
16. Error:
Incase of DESCRIBE statement, DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.
Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
CHARACTER MODE is added when the data object is of flat/ character type.
BYTE MODE is added when the data object is a deep structure.
Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
LENGTH clen IN CHARACTER MODE.
Where blen and clen must be of type I.
17. Error:
Incase of DO-LOOP Error, In Do loop range addition needed
Correction:
An internal tables is declared and the two fields (VARYING field and NEXT field) were
Included inside the internal table
E.g.: In program SAPMZP02
DO 11 TIMES
     VARYING STATION_STATE FROM STATION1 NEXT STATION2. ECC6
CASE SYST-INDEX.
WHEN 1
STATION_STATE = STATION1.
WHEN 2
STATION_STATE = STATION2.
WHEN 3
STATION_STATE = STATION3.
WHEN 4
STATION_STATE = STATION4.
WHEN 5
STATION_STATE = STATION5.
WHEN 6
STATION_STATE = STATION6.
WHEN 7
STATION_STATE = STATION7.
WHEN 8
STATION_STATE = STATION8.
WHEN 9
STATION_STATE = STATION9.
WHEN 10
STATION_STATE = STATION10.
WHEN 11
STATION_STATE = STATION11.
18. Error:
Incase of the parameter QUEUE-ID Error, QUEUE-ID is neither a parameter nor a select option in program rsbdcbtc.
Correction:
The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
E.g.: In program Z_CARRIER_EDI_INTERFACE
     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
19. Error:
Incase of EPC Error, Field symbol <TOT_FLD> is not assigned to a field .
Correction:
This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
The OS Note - 1036943 needs to be applied.
Error:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
Correct:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Error:
Constants : c_tab type x value '09' .
Correct:
Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
Error:
Data : begin of output_options occurs 0 . Include structure ssfcompop.
Data : end of output_options .
Correct:
Data : output_options type standard table of ssfcompop with header line .
Error:
PARAMETERS : NAST TYPE NAST .
Correct:
PARAMETERS : NAST TYPE NAST NO-DISPLAY .
Replace WS_DOWNLOAD and WS_UPLOAD by
GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
Issue:
Moving data from one structure to another structure if those two structures are not compatible
Solution:
we should use move-corresponding or field by filed we need to move it.
If database structures are different in 4.6c and ECC6.0,
Then we should go with append structure concept.
While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
Also Check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
Reward points if helpful.
Regards,
Ramya

How do i put a cover on the album when the album isnt a part of the itunes store?

How do i put a cover on the album when the album isnt a part of the itunes store?

fishmore wrote:
BUT the image didn't actually work and all I ended up with was the word JPEG and a generic image... Any assistance would be appreciated - Thank you.
Sounds like you copied an icon from the icon spot in a Get Info window for an image file, then pasted that intoo the same spot in the Get Info window for your folder. As you found out, that won't work - unless the image file already has a custom icon, that is.
Visually, it's hard to tell if an image file has a custom icon, particularly if View Options for a folder (or the desktop) has been set to 'show icon preview' - the OS will use Preview to make an icon for that file 'on the fly', but it does not really exist as far as being a copyable icon.
For what you want to do, the solution is really very easy.
Do a Get Info on the image file whose icon you want to copy for your folder. In that Get Info window is a larger depiction of the image about halfway down - double-click that, and it should open in Preview.
Press Command-A (that's Select All in the Edit menu).
Press Command-C (that's Copy in the Edit menu).
Close Preview, close the Get Info window for the image file.
Open the Get Info window for your folder.
Select the icon in the upper left by clicking it once - a blue border should appear around it.
Press Command-V (that's Paste in the Edit menu).
Close the Get Info window, and you're done.
Comment - that's a nice way to make unique folder icons, but there is one drawback: how to distinguish visually between a folder with such an icon and an image file.
One way, old school, is to append the character ƒ to the end of the name you give the folder. That character is easily generated by pressing Option-F and can be a visual indicator that the item is actually a folder and not an image.

Where is the Character Encoding option in 29.0.1?

After the new layout change, the developer menu don't have Character Encoding options anymore where the hell is it? It's driving me mad...

You can also this access the Character Encoding via the View menu (Alt+V C)
See also:
*Options > Content > Fonts & Colors > Advanced > Character Encoding for Legacy Content

Searching for the backslash character ("\") on the touchpad

I just want to configure my wifi connection so I need to enter my network password. Problem is there is no backslash character "\" on the touchpad and this character is part of the network password !!
On the touchpad we see or have access to three groups of characters. There is a slash "/" with the group of alphabetical characters and an another slash "/" in the group of special characters but I have not found the backslash anywhere.
Because this the only machine not able to connected to the network I dont want to reconfigure the all the network interface.
Would be happy If you have a solution...

Hi @Brisson
If you do not see the character you are looking for in the available characters, it is not an option. You will need to change your network password. You could however try configure the printer for the network a different way, perhaps through the EWS, or the software. This would allow you to use the computers keyboard to enter the password.
If you require further assistance with this, I am happy to help, but please post back with your printer model. How Do I Find My Model Number or Product Number?
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Where is the "\" character on the touchpad of a Laserjet mfp M177fw

Similar Messages

Maybe you are looking for