Where is the community support forum? I want to interact with "human beings"

Hi, I am looking for a community to interact with people.
I don't want to ask questions to a computer, it is not friendly. The main issue I have with this is that I thought Mozilla was all about being open and working together, but I can not see this at all here.
How do I communicate with other users?

Hahaha, thanks : ), but you know what I mean.
I don't feel like I can browse through the comments of real users when I enter the Mozilla site. It feels like I am inputting my issue and getting submitted response, not an interactive experience with users with similar issues.

Similar Messages

  • How do I get help if neither the database nor the Community Support forum helps with my problem?

    I have been having a problem with downloads stopping for several minutes every 30 minutes plus at the same time I cannot load or refresh any websites for as long as the seizure lasts. while at the same time torrent downloads continue without a hitch. I disabled all my extensions and plug-ins, ran FF in safe mode, stopped the torrent download to see if that was somehow causing it, searched the database for several hours, and asked for help on the community support forum, none of which helped. If I can't get more support I will ahve to stop using FF altogether, which would be a shame after using it for many years

    Did you download another browser to see if happens there too ? as you said in : https://support.mozilla.org/en-US/questions/931731
    also, try to disable antivirus and firewall and check it again.
    thank you

  • Where is the chat support I was using to talk with Felix last night about a download error?

    I was using a chat support thingy last night to talk with someone named Felix.  But, now I can't find the link to re-establish chat communications with support.  Where is it?

    Hi Nazim
    This is a user to user group.  There is no-one from Apple here.
    Use this link to contact Apple directly.

  • Where is the ALM Support forum? Impossible to find in this new "improved" forum. UGH!

    My old links brought me here... I spend 20 minutes now trying to locate the Support site for ALM (lates revision of Quality Center).... Please provide me with a link to that forum.
    Thanks!

    Here is the link to the revamped Flash Player forums as a result of your post: Flash Player. And this thread has been moved (not by me) to the forum where you can ask questions about using Flash Player...

  • Where's the customer support????

    Where's the customer support???? I have two purchased CC memberships and I am unable to access them. Waste of money. Someone please tell me how you can actually contact Adobe to solve things instead of forums that waste our time.

    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • New Community Support Forums

    I am trying to reply to a contributor "likeabird" who kindly responded to a post.
    There is only some improvement in the new Support Forums. I now have a "reply" option, but there is no response when pointing to it.
    Must be getting old. I'm forgetting which direction to whistle, point in the right direction........and more, to get things to operate correctly. Perhaps should hold breath and count to ten a few times longer.
    I'll try directly from the web on the main PC. Looks like a reformat or a new laptop. This one is old by today's standards at 4 years. Yet more expense to keep up with developments.

    Thanks for your response.
    I have finally muddled through the procedures on my fast Windows 7 HP desktop.
    I have not installed iTunes on this PC as I want to keep things separate.
    It all seems to improve when setting the support website to compatiblity mode. I still don't think that the support website is fully developed. Apple wiould not be pleased to read this. Only time will tell.
    I made the mistake of upgrading to IE9 on both computers.
    10 years of calendar records are now fully functional on the IPOD touch-even if the search function is very limited.
    ribblev, Lancs U.K.

  • AAMEE 3 is released, is this the "official" support forum?

    AAMEE 3 is released, is this the "official" support forum?

    Thanks, Jody,
    Just following up, this appears to be the AAMEE forum page:
    http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent
    Kudos to Jody for his blog post:
    http://blogs.adobe.com/oobe/2012/06/announcing-the-enterprise-deployment-forum.html
    Don

  • Where is the Oracle Portal forum?

    Hi everyboy!
    I have a question about Oracle Portal version 10
    If there is someone who knows where is the Oracle Portal forum ?
    Please responde me. Because I haven't found it, and it's very urgent.
    I expect your prompt reply, any help will be very appreciated.
    Thank you in advance.
    Best Regards

    Erik,
    Please visit:
    Oracle Application Server PortalBest wishes,
    -Michael

  • Where is the Tech Support for Crystal Reports

    Where is the technical support for Crystal Reports?  I have just been through one of the worst technical supports circles in my entire career - this phone# to that phone# and only to be told you cannot talk to a Tech Support person.  My dilema for anyone that can help - I am using Crystal Report 2008.  I have mapped to a database in MS Access 2002.  I copied the database to my desktop and created a test report.  I can see the fields in the Field Explorer.  I have dragged the fields onto the report and they are visible in Design View.  I can see the data in the fields when I browse the fields.  In the Preview View I do not see any data what-so-ever.  I have not changed any defaults and have not suppressed or hidden information.  The $1M question:  Why can't I see the data on my report?  I never had the problem when I used Crystal Reports v8.

    The datasource shows my database.  I believe that is what you meant.  No data.  IT has asked me to ask ? if in the Control Panel DSN if we need some information there.  I don't have a clue - I am just a report writer and not an IT person.

  • Where is the iPad Discussion Forum

    Where is the iPad Discussion Forum

    It's the uppermost entry on the left side of the main page, or here.
    (51089)

  • I have some old cd's I have burned on itunes. How can I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe . Please be gentle.

    I have some old cd's I have burned onto itunes. Howcan I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe. Please be gentle

    Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
    However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD)  - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
    Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
    Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
    Steven

  • HT1338 where is the update for aperture to make it work with the updated os x yosemite

    where is the update for aperture to make it work with the updated os x yosemite

    The currently sold version of Aperture at the AppStore, Aperture 3.6 is compatible with Yosemite. 
    See the Release notes: Aperture 3.6 Release notes
    If you are running any version of Aperture 3, you should be able to update to this version.  Does the update not show for you?
    The update has been shown automatically for those who had upgraded from Mavericks and been running Aperture 3.5.1. Other users, who skipped Mavericks and Aperture 3.5.1 have reported problems to get the update to show and needed to contact the AppStore Support. The update did not show, if the users tried to update from an earlier version.

  • Could not load the Multiprocessor Support module because it wont work with

    Here is a strange error message, there are actually 2.
    But they arent making PSE 8 unusable, just very annoying.
    Here is the first one,,,,,,,,,
    "Could not load the Multiprocessor Support module because it wont work with this version of photoshop."
    When I open PSE 8, on my new Intel Mac, I get this message and nobody seems to know what the problem is.
    My new Mac has 2 processors? Could that be what the message is saying?
    But when I click the error message away, PSE 8 works fine.
    There is another one too,
    "Could not load the FastCore Routines module because it doest not work with this version of photoshop."
    I just click it away and no problem, just a pita.
    So if they dont effect it, I shouldnt worry, but my classmates are concerned.
    Do you here have any idea what it is, and how to get rid of it?
    There is info on the web about it, but no solutions.
    Thank you,
    Jane

    This is interessting, as does my new Mac have 2 processors or 2 cores?  I havent come across how this works yet, nor how to find it on my Mac.
    Yes, I just found a site which explains it well,
    http://macperformanceguide.com/Optimizing-Cores.html
    I have one processor with 2 cores.
    And the equivalent of the Task Manager is the Activity Monitor, where I see only one processor.
    You sure explained this well!   I now think we can find the problem, though its not effecting either my PS or PSE, its just an annoying message that I have to click away.
    http://kb2.adobe.com/cps/407/kb407809.html
    Is what Adobe tells us, this is for Windows, but it could apply to Macs?
    I have tons of third party plug ins, and this problem is within the last month, and I didnt see the error messages before.  Thats confusing, as I would have thought it would have shown up right from the start.
    I just moved some of my plug ins, lets see if this changes anything, nope, but only one message appeared this time.
    This will be fun to see what the real answer is!  As I find out more, I will add it here.
    Thank you,
    Jane

  • I would like to know is there anybody out there in the community who is not having a problem with the updates.

    I would like to know is there anybody in the community that is not have a problem with the updates.

    That is incorrect. Either you misread or the newspaper you read was wrong. iOS 6.1.2 fixes a bug that caused excessive activity and log entries with Exchange servers.
    http://support.apple.com/kb/DL1639
    The security breach was due to Java-based malware:
    http://www.ft.com/cms/s/0/1fdebce6-7ac8-11e2-915b-00144feabdc0.html

  • When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

    When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?

    I get a problem like yours. I have a mac mini with 2 hdds the server and hd2 I installed windows 7 and the windows works fine. except it will not allow me to get on the net.  I get error 651.  I can boot back to lion and the internet connection works. I googled and error 651 does seem to show up.  I would like  a work around.

Maybe you are looking for