Where is the complete configuration for catos4000 switch?

thank you!

Hi Friend,
Here is the complete configuration guide for catos 4k switch
For release 7.x
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/rel7_1/config/index.htm
Complete details about 4k switch with command reference
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/rel7_1/index.htm
HTH
Ankur

Similar Messages

  • HT4356 After verifying the complete configuration for my EPSON WF-3520 printer, still not finding it.

    I am not able to find the printer from any IOS device (iPhone 4 & new iPad).  Contacting EPSON technical support with this problem and they offer no solution.
    The printer is on the same subnet, IP address assigned via DHCP.  Windows devices print to it fine.  The EPSON iPrint utility sees the printer.  Epson technical support states it is an Apple issue not an Epson issue.
    I have been able to find the printer if I power the printer off, wait a few seconds then power it back on.  Then sometimes the IOS devices will find the printer.
    Is it better to assign the IP address manually (outside the DHCP range)?
    Is it better to define the IP/MAC address on the router?
    Thank you.
    Kurt

    katrinalg wrote:
    Hi all..I have tried everything to get my printer to connect since I updated to Yosemite
    So are we to assume that when you open Printers & Scanners and click the plus button to add, with the Default view selected the Epson is not visible?
    If yes, then a protocol called Bonjour is responsible for making the printer visible and there are other users who have upgraded to Yosemite and found the same issue.
    Until Apple determines the cause of this problem one workaround you could try is to add the printer using one of the IP protocols included with the OS. To do this you will need to know the IP address of the printer. You may be able to determine this via one of the other Mac's that are still printing to the Epson. Or by printing a network configuration page via the Epson control panel. Once you find the IP address the printer is using you can open Printers & Scanner, click the plus button to add and then select the IP icon next to the Default icon. You can then enter the Epson IP address in the Address field, change the protocol to HP Jetdirect-Socket and in the Use menu, select the Epson WF3520 driver. Once you have added the printer then open a document and see if you can print.

  • Where are the epson drivers for Mavericks for the artisan 835

    Where are the epson drivers for Mavericks for the artisan 835

    OMT8 wrote:
    Well, I have this printer too, and I get the following response from the System Prefs Printers and Scanners when I select to add this printer:
    "The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
    When you go to the Epson website for this particular printer it says:
    "The latest drivers for this product are available only via Apple's Software Update."
    And finally, when you go to Software Update it says: "No updates available"
    I second OMT8.
    Yes, the driver file at http://support.apple.com/kb/DL1398 allowed me to finally install my printer, but does Apple have _any idea_ how long it takes to download a 1.08GB file over a 1.5mbps DSL connection?
    Never mind how much of my pricey new SSD is being consumed by the resulting 1.80GB of driver files all for _one_ printer driver that should maybe occupy 200K?
    Or that the primary article on OS X printer drivers (http://support.apple.com/kb/HT3669) -- which does indicate that the Artisan 830 is supported -- does not mention or link to the driver file that's needed to make it work?
    Or what a complete violation of Apple's "it just works" gestalt it is to be confronted with the above Catch-22 and to have to search the web and then go through all of the above to make a new laptop talk to a two-year-old printer?
    Yes, my printer now works, and yes, Apple's Support Communities were instrumental in getting to this point. But spending all morning (plus download time) getting a printer driver installed tastes way too much like I paid for Apple and got Microsquish.
    -carl-

  • Where is the server configuration data stored?

    Where is the server configuration data stored?
    <P>
    The data is stored an ASCII file named server.conf
    . This file is stored in
    the config directory on the same server-root as the iCS 2.0 binaries. The
    format of the server.conf
    file is described in detail in the Administration
    Guide.

    Try to read
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
    UME user data is stored in one or more data sources. Each type of data source has its own persistence adapter. The persistence manager consults the persistence adapters when creating, reading, writing, and searching user management data. Persistence adapters for the following types of repositories are available: 1. Database: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which databases are supported. 2. u2022 Lightweight Directory Access Protocol (LDAP) directory: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which directories are supported. 3. SAP Systems based on Web Application Server 6.20 You can configure UME to use one or more of these persistence devices in parallel. Users can also be stored in several different physical LDAP directory servers, or in different branches of the same LDAP directory server.

  • Where are the backup files for my iPad located on my macbook pro with maverick ?

    where are the backup files for my iPad located on my macbook pro with maverick ?

    As an addendum, if I need to, and hopefully won't, unless I switch computers, how can I revert from a copy of a different backup?  Thanks. :-)

  • I am already customer and want to upgrade and take the offer of $29.99/month for the complete CS for existing customers (which I qualify for) but when I try 'BUY' - it keeps sending me to this forum?? How do I get the $29.99/month deal?

    I am already customer and want to upgrade and take the offer of $29.99/month for the complete CS for existing customers (which I qualify for) but when I try 'BUY' - it keeps sending me to this forum?? How do I get the $29.99/month deal?

    Hi Bev,
    Thanks for the the email - I understand now.
    I would just like to ask another question with regards to my new order for complete Creative Cloud which you suggested. I have now pre-paid for a full year but I’m not
    sure when I can start downloading the other APPS as they don’t seem to be updating on my current Creative Cloud account app display. It still shows my old configuration
    of products (i.e. Photoshop etc) and my ‘activity stream’ relates back to 9 days ago.
    Please let me know how to get my new order activated.
    Thanks
    Kevin Bartley
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

  • Why is it that on a 5s you can by pass all security measures via Siri, where as the 4S asks for an unlock?

    On a 5s you can by pass all security measures via Siri, where as the 4S asks for an unlock.  Why?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Where is the default location for the OC4J logs?

    Where is the default location for the OC4J logs?

    Depends on what variant of the product you are using.
    In an Oracle Applicaiton Server environment (ie the one you install versus unzip) the stdout/stderr streams from OC4J are captured in the $ORACLE_HOME/opmn/logs/<group-instance> directory.
    If you are using standalone then stdout goes to the console where you started the process.
    The logs for the OC4J instance itself are located in $ORACLE_HOME/j2ee/home/log/<instance_group> directory. In this directory you'll see different logs for differet areas of the server. Most of the logs however are captured in the oc4j sub-directory in the log.xml file. Whenever you enable an OC4J component logger in the j2ee-logging.xml file or via ASControl, this is where the logs will end up.
    Take a look at the $ORACLE_HOME/j2ee/home/config/j2ee-logging.xml file -- the log handlers will give you some idea on the different log files that are in use.
    You can configure your application loggers to also direct their log into this file if you wish. See http://buttso.blogspot.com/2007/09/directing-log-messages-into-oc4j.html for an example.

  • Where is the "repeat" button for songs/albums/playlists?

    Where is the "repeat" button for songs/albums/playlists? It used to be next to the random play button.

    You can access the repeat options if you right-click on the shuffle icon, or if menus are enabled you can use
    Controls > Repeat > Off | All | One.
    Once the control is visible you can click it to switch between states as before. If the control is turned to off it disappears on the next track change. In contrast the shuffle control remains visible whenever it is appropriate. Hopefully the next release will fix this.
    tt2

  • Where is the WPS button for the MG5520 printer?

    where is the WPS button for the MG5520 printer?

    Hi luca2,
    The WPS button is located on the router, not the PIXMA MG5520.  If your router does not have a WPS button, please follow these steps:
    1.  On your PIXMA MG5520, go to the Home menu or press the Home button.
    2.  Use the arrow keys until Wireless LAN Setup appears and select this option.
    3.  If a 'WPS' prompt appears, press STOP.
    4.  Select the Standard Setup option.
    5.  Follow the remaining prompts on the printer menu to connect the unit.
    Once this process is complete, use the disk to install the unit on your computer.
    If you continue to have difficulties, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Experts - where are the main settings for country currency settings

    Hi
    where are the main settings for different country currency settings.
    Ex:
    us,canada and europe customers us$, canada $, europe euro,
    How the pricing will effect for different country customers?
    Any one can help me on this.
    Any documents on thes please send to [email protected]
    Thanks
    Kris

    You can find this in the following path.
    SPRO->GENERAL SETTINGS> SET COUNTRIES>DEFINE COUNTRIES-->
    Here countries have an ISO CODE
    Then
    SPRO->GENERAL SETTINGS>CURRENCIES-->CHECK CURRENCY CODES
    Here ISO codes mapped to currencies.
    If CCode currency = Customer master currency, then transactions will happens in that currency
    If CCode currency<> Customer master currency, then the exchange rate will come into play to convert customer currency to company code currency.
    And anway if you want a different currency from the country currency, you can mention that in ccode configuration. The presence of currency in company code configuration is must and hence configuration at country level is not needed I think
    Hope this helps.
    Rewards pls
    Message was edited by:
            Navaneetha Krishnan

  • Where did the swipe gestures for web browsers go?

    where did the swipe gestures for web browsers go? cuz the 3 finger swipe to go back and forth a page on web browsers now swipes through full-screen apps... i miss that functionality

    JedwardKullen wrote:
    where did the swipe gestures for web browsers go? cuz the 3 finger swipe to go back and forth a page on web browsers now swipes through full-screen apps... i miss that functionality
    If you configure your trackpad settings for "Swipe between pages" TO "two or three fingers" you'll get the functionality back on firefox.  To also correct the issue on Magic Mouse, if you happen to own one, configure the same setting to: "one or two fingers" under Mouse settings.

  • Where is the download page for all firefox

    where is the download page for all firefox, I need a location to check the versions of firefox then download the version I want using script(webdriver)

    omgosh ! soooo frustrating everytime i download windows media player download complete box comes up & then i click on open and it says this file is not a movie ... so then i just clicked on the download after reading your suggestions and when done downloading my iphoto came up and it said this file cannot be supported .. am i supposed to have sum kind of software for apple ?? what am I doing wrong ?? I know that i have a mac os X ..omgosh sooo much stuff to learn on this thing ! i never know which way to go :o(

  • Where is the download link for premiere elements 10 and previous versions?

    Where is the download link for premiere elements 10 and previous versions?
    Also the search program doesn't find previous version downloads.
    Chat is completely busy and won't let me in.
    And I am not paying $39 for what is an Adobe issue.
    FAIL!
    Anyone know where I might find it?

    A.T. Romano wrote:
    ProDesignTools offers these downloads for the Adobe tryouts of older Photoshop Elements and Premiere Elements versions
    What I've always found strange though is that the downloads themselves come from Adobe's servers. Just seems weird that Adobe themselves won't provide the links!
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • How can I list all the domains configured for Weblogic Servers?

    How can I list all the domains configured for Weblogic Servers?
    I saw a note, which says the following:
    "WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
    In my case, I just want to list all the domains, is that possible by using any scripts?
    Thanks
    AJ

    If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
    <MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
    Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

Maybe you are looking for