Where is the "crop page" pop-up menu in Acrobat X tools?

Clicking on Tools > Pages > Crop only shows me manual rectangle crop selection. There is no pop-up menu showing me options such as "removed white margins" etc. as we were used to in Acrobat 9. How does one enable this pop-up menu?

If you make a rectangle with the crop tool, then double-click there is an check-box to remove white margins, similar to what was in version 9.

Similar Messages

PREVIEW - Where is the "SELECT" toolbar pop-up menu?

I'm using Preview Version 6.0.1 (765.4) and MacOS 10.8.2. I want to separate an image from its background. To do this I need to go to the Toolbar, open 'Select' and then choose Instant Alpha.
Problem is I can't find the Select pop-up menu.
https://dl.dropbox.com/u/11373233/MacDiscussions/Preview/Screen%20Shot%202013-01 -26%20at%2015.21.47.png
Preview Help says "If you can’t see the Select pop-up menu in the toolbar, you may need to resize the window."
I've tried all sorts of window sizes but none have made the Select menu option manifest itself. I suppose that it's possible that my interpretation of "resize the window" may be different from Apple's. But I don't know.
I've also tried Customize Toolbar in the View menu but the Select menu option isn't there to drag to the Toolbar.
I've tried resaving the file from jpeg to PDF and working on that instead, but still can find no Select option.
Does anyone know why I can't find the Select menu in Preview's Toolbar?

leroydouglas wrote:
Preview> under View you can open Show the tool bar.
You may have to drag the image wider in order to see the instant alpha tools etc on the right side.
There are 2 short cuts:
shift-command-\ ( same as command-| )
shift-command-a
Hi Leroydouglas
Thank you for your reply.
leroydouglas wrote:
Preview> under View you can open Show the tool bar.
First thing I tried. Made no difference.
leroydouglas wrote:
You may have to drag the image wider in order to see the instant alpha tools etc on the right side.
Interesting point. As I said, I have done all this of course,. Hence I doubted my interpretation of the Help Page instructions.
However I find, even now, that when I drag the right edge of the window over to what would be half way across my second screen if it were connected (it is disconnected right now because the monitor has died and I haven't replaced it yet) still all I can get are the options as far right as the crop tool. That's it.
There are 2 short cuts:
shift-command-\ ( same as command-| )
shift-command-a
I found them to be -
shift-command-\
shift-command-a ( same as command-| )
But, what the heck, who cares? Neither keystroke made any difference.
Might be a clue though?
Again, thanks for taking the trouble to reply, Leroy. Much appreciated my friend.

Where is the crop pages dialog box in Acrobat 10 Pro?

I tried the help file and looked high and low, but can't find it. Thanks.

Can somebody please help me? Nothing I do seems to open up the "crop dialog box".
I start with Edit > Edit Text & Images. Then, I click the crop symbol, and set the ranges of my desired crop. Then I want to apply this crop, but nothing works.
I've tried:
     - Double Clicking Inside the selected crop-box
     - Double Clicking Outside the selected crop-box
     - Triple Clicking
     - Quadruple Clicking
     - CTRL-SHIFT-T
     - Hitting Enter
     - Right clicking
     - Searching endlessly for some sort of button pertaining to "apply crop", to no avail.
     - Changing to different PDF type (scanned, instead of text-to-pdf) and trying again
     - Yelling
     - Punching
     - Crying
None of the afforementioned seems to work.
Help please?

How to get the cropped page content

Consider an A4 size pdf is cropped in Bottom and Right edges.
If the user wants to open the pdf as A4 size then we are passing the rectangle size A4 to PDPage.DrawEx() method to get the page content.
When we use like this, we are getting the full page content but our requirement is to get the cropped page content.
Is there any way to get the cropped portion alone by passing the rectangle size as A4 to PDPage.DrawEx() method.
But it is working fine for Left and Top edge cropping

Have a look at this document:
http://partners.adobe.com/public/developer/en/acrobat/sdk/AcroJSGuide.pdf
go to the index and search for the term "Crop" or "Cropping" which has a hyperlink for page 70. There you will find some JavaScript options for cropping the page from all sides which can then be saved using some other methods in the document. I'm not sure, though, if JavaScript is what you're looking for.

Where is the "Facing Pages" Option in Pages?

Where (oh where) is the "facing pages" button in the new iCloud Pages?? It used to be in the document pallet, but now seems to have gone missing.
Thanks!
Bryce

There is no facing pages at iCloud.com or Pages 5.2.

Where does the personalized page definition exist in the database?

Hey all,
Where does the personalized page definition exist in the database(which top)?From the functional adminitartor i see the path as "/oracle/apps/ar/creditmgt/analysis/casefolder/webui/customizations/responsibility/12345/pagename.xml" where does this structure actually exist in the file system? i want to know the header package or root directory of "/oracle/apps/ar/creditmgt/analysis/casefolder/webui/customizations/"
one more question the gurus is if i want to migrate a personalization from on instance to another should i have the same above folder structure?
Like i export the customized page from my T1 test instance to T1 file system now i move this to T2 file system...now in my T2 file system should i have similar structure like "XX_TOP/oracle/apps/ar/creditmgt/analysis/casefolder/webui/customizations/" for successful migration?
Thanks & Regards,
Sameer.T

You perobably need someone more 'tecchie' than me to answer the first question. But, the structure will already exist as it is built into the application.
To answer your second question, to transfer the personalisation from one instance to the other, you can use the Functional Administrator responsibility. Your DBA will need to create a 'common' directory which is available to both instances. If the two instances cannot 'talk to each other', then he may have to FTP the XML files from one instance to the other.
When you export from instance A, the appropriate structure will be built underneath the root 'transfer' directory described above. In the target environment, you import the same structure.
As personalisations are at various levels, e.g. responsibility, function etc. Beware that at the responsibility level, the match between the responsibility name on the source and target systems is done by the responsibikity key. As long as this is the same in both environments, the personalisation will be transferred. If it is different it won't work!
I hope this helps answer the question.
Regards
Tim

Where is the Crop tool in CS6?

I used to use the Rectangular Marquee to crop an image, but that is no longer an option. Where is the Crop tool? I tried to use instructions at Photoshop Help | Adjusting crop, rotation, and canvas but that did not help. It never did tell you how to crop an image.

I used to use the Rectangular Marquee to crop an image, but that is no longer an option.
Why?
Make the Selection, then use Image > Crop if you want to use that Tool.
The Crop Tool still has the single-key-shorcut C, so depending on your settings hitting C or shift-C repeatedly should select the Tools with which the Crop Tool shares a space in the Toolbox in turn.

When i open safari the bookmarks page pops up. how can i stop this from happening?

when i open safari the bookmarks page pops up. how can i stop this from happening?

Under the older iOS, when you opened a blank Safari page, Bookmarks automatically opened. However, with the newer iOS, this does not happen anymore. What iPhone and version of iOS do you have?

Disable 24-bit crystalizer... and where did the snap/crackle/pop

For the longest time, I thought the crackling and popping was because of the CMSS3D Headphone option being enabled, but just for kicks, I tried disabling the 24-bit crystalizer, and poof! Where did the snap/crackle/pop go? It seems to be gone! I can li've without the crystalizer, after all there is really no way to make something sound better than the source. This gives me hope that it is a driver issue after all. I have a Rev A fatalty.

It is still there... you cant just hear it as good anymore.. i never have crystalizer on, i still got my rice crispies. So good if you dont hear it anymore.. but i know this wont fix it for many of us. I can agree that if i have cmss3d enabled but have MacroFX and Elevation Filter off, the pops& crackles are lower in volume.

Where is the download page for all firefox

where is the download page for all firefox, I need a location to check the versions of firefox then download the version I want using script(webdriver)

omgosh ! soooo frustrating everytime i download windows media player download complete box comes up & then i click on open and it says this file is not a movie ... so then i just clicked on the download after reading your suggestions and when done downloading my iphoto came up and it said this file cannot be supported .. am i supposed to have sum kind of software for apple ?? what am I doing wrong ?? I know that i have a mac os X ..omgosh sooo much stuff to learn on this thing ! i never know which way to go :o(

Rendering the PDF page to Bitmap object using Acrobat SDK DrawEx() or CopyToClipboard()

I am trying to find whether each page in PDF document is color or monochrome.
For doing this I am rendering the PDF page to Bitmap object using Acrobat SDK DrawEx() or CopyToClipboard()
Once after rendering the PDF page, I am using GetPixel() to read each pixel value to decide about color or Monochrome.
Problem:
When I read the pixel to decide about the page color or monochorme, in some XP machines it is showing the PDF page as color and in some PC it is showing it as Monochrome. Color quality in both the system is kept as 32 Bit.
After this I tried copying the PDF page directly into clipboard and then take the clipboard image to decide about color and monochorme, but even this also behaves in the similar way.
Question:
Why rendering the PDF page to Bitmap object using DrawEx() or CopyToClipboard() is behaving differently in each machines.
If required I will send my sample project.
With regards,
Rajeshrv.

In SDK documentation, there is no methods are defined for getting the color of the page. In color spaces and color values, we can set the color for drawing operations. A method AVPageViewSetColor is used for setting the color.
But there is no methods defined for getting the color in the page. Please let me know , is there any alternative way.
Thanks in advance.

Enable "scrolling preview" behind the Crop Pages dialog box in Acrobat 9 ?

Hi everyone,
I want to be able to preview the crop marks (when you click on "Document" and choose "Crop Pages" or Shift+Ctrl+T) before actually cropping all the pages of my documents. When the crop tool dialog box is showing, you can see behind it the crop marks that look like guides. In Acrobat 5, you could scroll the pages even with the crop tool box showing in front of your pages. This way, you could see the crop marks or "guides" on all the pages. But, in version 9, when the crop box is showing, you can only see the crop marks on the page(s) you're working on. You can't scroll behind the box to see what the others pages look like with the crop marks. I've uploaded print screens to make myself a bit more clear (Acrobat 5 vs Acrobat 9) :
http://localhostr.com/files/0484a8/acro5vs9_crop.png
If someone knows a way to get the crop preview scrolling back, maybe with a plugin or Javascript, please let me know !
Thank you all for your help.
Paul B.

Can somebody please help me? Nothing I do seems to open up the "crop dialog box".
I start with Edit > Edit Text & Images. Then, I click the crop symbol, and set the ranges of my desired crop. Then I want to apply this crop, but nothing works.
I've tried:
     - Double Clicking Inside the selected crop-box
     - Double Clicking Outside the selected crop-box
     - Triple Clicking
     - Quadruple Clicking
     - CTRL-SHIFT-T
     - Hitting Enter
     - Right clicking
     - Searching endlessly for some sort of button pertaining to "apply crop", to no avail.
     - Changing to different PDF type (scanned, instead of text-to-pdf) and trying again
     - Yelling
     - Punching
     - Crying
None of the afforementioned seems to work.
Help please?

Where does the second page of PREVIEW CONTRACT come from?

I am using 11.5.10.2, and I would like to know where the second page of PDF output comes from when I select PREVIEW CONTRACT from the VIEW CONRACT TERMS window. It does not appear to be part of the layout template named "PO Terms and Conditions". It does not appear to come from the XML SCHEMA file defined for the "Contract Terms Data Definition".
This page appears to be very much like a purchase order. I have tailored the XML template for printing purchase orders, and I need to be able to tailor the look of this doument as well.
Thanks

Well, I eventually figured this one out!!! There is a template (or more correctly an XSL stylesheet) that is delivered with Oracle. You can find it by using XML Publisher Administrator -> Templates, and looking for "Standard Purchase Order Stylesheet". This template is locked, meaning we can't update or replace it. It is also the format which you see (or saw) when you choose "Preview Contract". You can select 'preview' from the XML ADMIN template screen and you'll see what it looks like.
I also learned that there is a matching between "document type" and "Document Template" and also between "document type" and "Contract Template". And that the document type of 'PO' with document subtype of 'STANDARD' was associated with the "Standard Purchase Order Stylesheet".
I also found that
NM PO ADMINISTRATOR -> SETUP -> PURCHASING -> DOCUMENT TYPE
allows you to select a document type (like PURCHASE ORDER ... STANDARD). This displays a screen which has fields called "Document Type Layout" and
"Contract Terms Layout". This is where you can specify your own template (instead of the default one).

Where are the html pages located?

Can anyone let me know where the html pages are located? I have to send a webpage via internet explorer to a sharepoint server.

"As far as I'm aware you can't see individual pages as files as such as this DOMAIN thing does not have a file extension (like .iweb) or anything like that...."
Right click on the Domain file, and select Show Package Contents.
This will allow you to drill down to the individual files.
Apple apps tend use packages for their databases - iWeb, iPhoto, Aperture are ones that I'm familiar with.
Also, you can place this file anywhere, and simply double click on it open iWeb - it doesn't need to stay in the Library area.
Message was edited by: Klaas Visser

Where are the STARTER PAGE samples in Dreamweaver CS4?

Hi, I can't find the STARTER PAGE samples in DW CS4. Where
they are?
The starter page samples are VERY IMPORTANT!!

Dreamweaver is supposed to by a WYSIWYG type program...
You've been misinformed. DW has never been a WYSIWYG program.
The starter pages in CS3 were sorely out of date and inferior by today's standards. Adobe took them out of CS5 until better ones could be created. You'll find plenty of starter page resources below:
CSS Basic Template -
http://alt-web.com/TEMPLATES/Basic-1-col-fixed.html
CSS Rounded Borders Template -
http://alt-web.com/TEMPLATES/CSS-centered-round-boxes.shtml
Open Source CSS Grids, Frameworks and Multi-Column Layouts
http://EZ-CSS.org
http://960.gs/
http://code.google.com/p/blueprintcss/
http://matthewjamestaylor.com/blog/ultimate-multi-column-liquid-layouts-em-and-pixel-width s
Project Seven CSS Templates -
http://www.projectseven.com/products/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web-design.blogspot.com/

Where is the "crop page" pop-up menu in Acrobat X tools?

Similar Messages

Maybe you are looking for