Where is the data accessed by rwservlet ?
All -
Do you have any idea where the 10gASR2 reports servlet rwservlet gets
its information? I'm particularly interested in the details behind
the Application Server Control page
http://midtier.domain:7777/reports/rwservlet/showjobs?queuetype=past.
My company runs a large number of reports throughout the workday, and
I'd love to access a database table that contains the history of all past reports
and their timings.
Is this information contained in a table somewhere on the application server
infrastructure database? Which one? Or is the information stored in some
obscure XML file on the midtier?
Any helpful suggestions are much appreciated!
Tom G.
In the stupidly hidden user's Library->/Application Support/AddressBook/ labeled as AddressBook-v22.abcddb
For TM restores, see Pondini's TM FAQs for starters, since I don't use TM.
Similar Messages
-
after transfering data froAm my pc to mac using windows migration assist, where do the data go to on my mac please?
Welcome to the Apple Support Communities
By default, Migration Assistant creates a new user account where it puts all the transferred data. Just go to > Log Out, and log in the new user that Migration Assistant has created, so you will be able to access to the transferred data.
If you want to merge the data into the first user account, use the Shared folder (it's in /Users/Shared) to put the transferred files there, and then, on the first user, go to the Shared folder and put all the data in the folders you want -
Where is the data held in Max 3.0
Hi,
Not sure if this right place to post this but as MAX 3.0 was installed with labVIEW 7.0.....here goes..
With Max 2.0, the data assoicated for GPIB, VISA and IVI was held in two places, IVI.INI and VISACONF.INI.
Now Max 3.0 arrives, so where has the data gone. There still is an ivi.ini but it doesn't contain all the data. Visaconf.ini still seeems to be the same.
I can still see most of the settings for drivers, logical names etc when I launch MAX 3.0, that used to be in my old ivi.ini file. So where does it store them now.
Also, what has happened to the default settings that used to be defined for a logical name?
Looking, in the MAX folder there are a load of LV VI's in the MAX\Assistants\LVCGen, what are these used for
I have looked, at the Max help but its a bit vague.
Can anyone shed some light.
Regards
Ray Farmer
Regards
Ray FarmerHello Ray,
With installation of LabVIEW 7.0, you have also installed MAX 3.0 and IVI Compliance Package 2.0. The IVI Compliance Package (ICP) 2.0 is a software package that contains IVI class drivers and the support libraries necessary for the development and use of applications that leverage IVI instrument interchangeability. The IVI Compliance Package also is based on and is compliant with the latest version of the instrument programming specifications defined by the IVI Foundation.
One of the most prominent changes between previous IVI products and the IVI Compliance Package is the way that the IVI Engine, IVI MAX configuration utility, and other IVI products included in the IVI Compliance Package access and store configuration information. The Configuration Server provides
a database for storing configuration data and an API for accessing this data.
This database is called the Master Configuration Store. Various IVI products have been redesigned to work with the Configuration Server instead of the previous method, which involved using the ivi.ini file.
If you have any configuration information stored in the ivi.ini file, the installer converts the existing ivi.ini data into a new format that is used by the Configuration Server and stored in the Master Configuration Store file (IviConfigurationStore.xml). This conversion process, which takes place when you install the IVI Compliance Package, removes the converted items from the original ivi.ini file as it places them in the Master Configuration Store database.
The installer also creates a backup copy of the ivi.ini in the same directory as the original ivi.ini.
If, after you install the IVI Compliance Package, you run an older specific instrument driver installer that adds entries to the ivi.ini file, you can convert the newly installed configuration data by running MAX, which monitors the ivi.ini file for changes. If MAX detects any changes, it launches a conversion utility automatically before loading the configuration from the Master Configuration Store file. Also, you can run the converter utility manually by selecting Start�Programs�IVI�Tools�INI to XML Converter.
There are a few KnowledgeBase entries on ni.com on this topic:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/b83c7bbd43fd855486256cd10077ef06?OpenDocument
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/72f3656387deaefa86256d180062862c?OpenDocument
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/33b3f3ea0f305a3386256d170064f02d?OpenDocument
You can also find more information in the ICP Release Notes.
I hope this helps.
Regards,
Vesna Jadric
Instrument Drivers/IVI -
How do I figure where is the data in a materialized view coming from
Hi: when I run select NAME, OWNER from dba_mview_refresh_times, I see a number of materialized views. How do I find more details about this view i.e where is the data coming from and which fields. The source table that is in another database changed. But the view on my database where the materialized view exist has not changed. I want to confirm from where is data coming in this view
TIA
RaviSQL> select * from dict where table_name like 'ALL%MVIEW%'
TABLE_NAME COMMENTS
ALL_BASE_TABLE_MVIEWS All materialized views with log(s) in the database that the user can s
ee
ALL_MVIEWS All materialized views in the database
ALL_MVIEW_AGGREGATES Description of the materialized view aggregates accessible to the user
ALL_MVIEW_ANALYSIS Description of the materialized views accessible to the user
ALL_MVIEW_COMMENTS Comments on materialized views accessible to the user
ALL_MVIEW_DETAIL_PARTITION Freshness information of all PCT materialized views in the database
ALL_MVIEW_DETAIL_RELATIONS Description of the materialized view detail tables accessible to the u
ser
ALL_MVIEW_DETAIL_SUBPARTITION Freshness information of all PCT materialized views in the database
ALL_MVIEW_JOINS Description of a join between two columns in the
WHERE clause of a materialized view accessible to the user
ALL_MVIEW_KEYS Description of the columns that appear in the GROUP BY
list of a materialized view accessible to the user
ALL_MVIEW_LOGS All materialized view logs in the database that the user can see
ALL_MVIEW_REFRESH_TIMES Materialized views and their last refresh times for each master table
that the user can look at
ALL_REGISTERED_MVIEWS Remote materialized views of local tables that the user can see
13 rows selected. -
"unable to connect to the data access service" installing report server
Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012. Management server and operations console on one, and SQL, web console, and reporting server on the other. When I get to the web console and reporting server install, and
the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
"Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."
Here is the setup log error:
"Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long."
I don't see the "Data Access" service in services on either server. I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
Everything seems to be working until I get to this point.
Thank you for any help you can provide,
DanHi Tom,
1. Did the setup complete successfully on the MS and Console server?
>>>Yes, without issue
2. You do not see the service "System Center Data Access Service"
>>>I do indeed see it on the MS and Console server, it is set to Auto and running. (I also tried rebooting this server and retried, no help)
3. Is the Windows Firewall enabled?
>>>It has symantec endpoint protection. I disabled symantec completely on both servers and retried, no help.
Thx,
Dan -
The Date Accessed attribute is resetting to all the files in a folder
Hi all,
I have an issue that the "Date Accessed" attribute is often resetting to all the files in a folder if i open single file as this folder is from File server mapped as Drive to me. This is happening to all the users whoever connect to that fileserver
and i see same issue from RDP as well. is there any option to check which is resetting the "Date Accessed" attribute to all the files. The Date Access attribute is simillar to Date accessed and Date modified. We need to fix this issue as it is related
to security concern for us. The file server is windows 2008 R2 and the client machines are windows 7.
Side note: I can see that there is no software, antivirus, offline sycn is causing this issue.
Thank you,
Sampath
P.SampathHi,
It seems that some specific process accessed the files and updated the attribute. You could configure auditing on the shared folder. Then you can go through the auditing log to check which process is doing the read operation on all these files.
Configuring Audit Policies
http://technet.microsoft.com/en-us/library/dd277403.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SCOM 2012 Issue The Data Access service is either not running or not yet initialized
Hello All,
My SCOM 2012 console all of sudden stopped working when I changed the size of the SQL database for the SCOM server.
The setup is all on a virtual machine running windows 2012, with SQL 2012 running SCOM 2012 SP1. Everything was working until I made the SQL server database size change.
Now I am getting an error when I try to open the SCOM 2012 console. It just says Failed to connect to server servername.internaldomain.com The Data Access service is either not running or not yet initialized. Check the event log for more information.
here is the logs from the console app (the application logs are below this)
Date: 2/11/2013 12:16:45 PM
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message: Failed to connect to server 'servername.internaldomain.com'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.X.X:5724. --->
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.ManagementGroup.Connect(ManagementGroupConnectionSettings connectionSettings)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://servername.internaldomain.com:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0956135. TCP error code 10061: No connection could be made because
the target machine actively refused it 192.168.X.X:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.X.X:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
Application Error: Event ID:1000
Faulting application name: Microsoft.Mom.Sdk.ServiceHost.exe, version: 7.5.2808.0, time stamp: 0x5082b3a5
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6
Exception code: 0xe0434352
Fault offset: 0x000000000003811c
Faulting process id: 0xb28
Faulting application start time: 0x01ce088d19221739
Faulting application path: C:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.Sdk.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 5a80a27e-7480-11e2-93fc-00155d01651b
Faulting package full name:
Faulting package-relative application ID
.NET Runtime Error Event ID: 1026
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart(System.Object)
I tried to reinstall the console and some of other mentioned things from the other posts but I think that there is a SQL issue here that I am not seeing. Can someone please help.
Thanks
Robert Lavigne Network Operations Manager - Kilobytes Data Solutions.Hi
The issue got resolved after refresh the SCOM Data base access service account in SQL 2012.
Unable to launch the operations manager 2012 R2 console after extended the C drive of the SQl server ,getting error "The Data
Access service is either not
running or not yet initialized.
Got to your SQL server -->databases-operationsmanager--security-users--locate the daa service account and refresh.issue fixed and am able to luanch. -
Where is the data saved in the srtucture for a particular tcode
Where is the data saved in the srtucture for a particular tcode.
For eg in MM01 there is a field with RMMG1
where dioes the data get saved from this field as in backend it shows the stucture and the structure can hold data only at runtime,
Please help me
Thanks in advance
chinnuHi,
The strcuture : RMMG1 holds data at run time only that to it can hold only one record at a time.
so we use this structure to hold data at run time and then we insert those values into database tables for that program.
Here you can the values stored and processed in the program in the tables : MARA (for matnr ,mbrsh,mtart..),MARC (for Plant ),MARD( for storage location : lgort )...etc.
so if you want to fecth some data means first you have to choose right table to fetch information by passing values in the selection screen.
Regds
Sivaparvathi
Please reward points if helpful... -
The Data Access Service is either not running or not initialized.
When I try to access the OPSMGR 2012 R2 console I get the error:
Failed to connect to server "SCOM01.THG.local"
The Data Access Service is either not running or not initialized.
Date: 3/4/2014 8:41:07 AM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message: Failed to connect to server 'SCOM01.THG.local'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to
net.tcp://scom01.thg.local:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0045038. TCP error code 10061: No connection could be made because the target machine actively refused it 10.192.1.27:5724. ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 10.192.1.27:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://scom01.thg.local:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0045038. TCP error code 10061: No connection could be made because the target machine
actively refused it 10.192.1.27:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.192.1.27:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 10.192.1.27:5724
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
System Logs:
The System Center Data Access Service service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The System Center Data Access Service service terminated unexpectedly. It has done this 5 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The System Center Data Access Service service entered the running state.
Application Logs
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: microsoft.mom.sdk.servicehost
P2: 7.5.3070.0
P3: 520d7e93
P4: System.Data
P5: 4.0.30319.18408
P6: 52310bef
P7: 2622
P8: 297
P9: 2V4KQ41FR0ZKJA4HMDJUZUWAZMPSCBGF
P10:
Attached files:
C:\Users\svc_scomdas\AppData\Local\Temp\WERB021.tmp.appcompat.txt
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DD.tmp.WERInternalMetadata.xml
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DE.tmp.hdmp
C:\Users\svc_scomdas\AppData\Local\Temp\WERC65B.tmp.dmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_microsoft.mom.sd_bd8814a66c4798fbd871834494e962595894932_cab_0837c781
Analysis symbol:
Rechecking for solution: 0
Report Id: 55e1dff8-a3a4-11e3-9412-00155d01fa02
Report Status: 0
Hashed bucket:
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Problem signature:
P1: microsoft.mom.sdk.servicehost
P2: 7.5.3070.0
P3: 520d7e93
P4: System.Data
P5: 4.0.30319.18408
P6: 52310bef
P7: 2622
P8: 297
P9: 2V4KQ41FR0ZKJA4HMDJUZUWAZMPSCBGF
P10:
Attached files:
C:\Users\svc_scomdas\AppData\Local\Temp\WERB021.tmp.appcompat.txt
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DD.tmp.WERInternalMetadata.xml
C:\Users\svc_scomdas\AppData\Local\Temp\WERB0DE.tmp.hdmp
C:\Users\svc_scomdas\AppData\Local\Temp\WERC65B.tmp.dmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_microsoft.mom.sd_bd8814a66c4798fbd871834494e962595894932_cab_0837c781
Analysis symbol:
Rechecking for solution: 0
Report Id: 55e1dff8-a3a4-11e3-9412-00155d01fa02
Report Status: 4
Hashed bucket:
Fault bucket , type 0
Event Name: CLR20r3
Response: Not available
Cab Id: 0
Application: Microsoft.Mom.Sdk.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.ConfigurationReaderException
Stack:
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(Microsoft.EnterpriseManagement.InProcEnterpriseManagementConnectionSettings)
at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart(System.Object)can you please check the following -
1) SQL services are running.
2) Data access service is running. you can try restarting the service too.
3) check that the OpsMgr database is not full.
4) start the 'SQL Vss writer" service.
5) check the sql server error logs.
6) Check your SQL accounts too.
7) Try this too -
To create this registry entry, follow these steps:
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
Right-click Control, point to New, and then click
DWORD Value.
In the New Value #1 box, type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type the number of milliseconds that you want to wait until the service times out, and then click
OK.
For example, to wait 60 seconds before the service times out, type 60000.
Quit Registry Editor, and then restart the computer.
Thanks, S K Agrawal -
Hi,
I have SCSM with remote SQL and the SCSM Management server give below error
Message: Failed to connect to server ‘Name of Server’
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. —> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://ServerName:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:04.0070932. TCP error code 10061: No connection could be made because the target machine actively refused it IPAddress:5724. —> System.Net.Sockets.SocketException: No connection could be made
because the target machine actively refused it IPAddress:5724
I had try to restart SQL & MS with same error,
Also i had try the following
https://social.technet.microsoft.com/Forums/systemcenter/en-US/c670d54d-3a92-481f-8dc9-55c475ad196f/problems-with-data-access-service-after-rebooting
https://social.technet.microsoft.com/Forums/systemcenter/en-US/26dc1d5c-fa82-403f-8949-3073f3b82a60/the-data-access-service-is-either-not-running-or-not-yet-initialized
Not help meRegardsI had same error before
below steps to solve it
Make sure SQL Server Running & ServiceManager Database not full
Stop All SCSM Services,
System Center Management Configuration
Microsoft System Center Data Access Service.
Microsoft Monitoring Agent
Rename Health Service State to Health Service State_old --- @ "C:\Program Files\Microsoft System Center 2012 R2\Service Manager"
Start SCSM Services
Microsoft Monitoring Agent
System Center Management Configuration
Microsoft System Center Data Access Service.
Wait 2 min...
check Event Viewer...
hope this help you.
Regards, Ibrahim Hamdy -
Unable to connect to the Data Access service for this management server
Hate to raise a sleeping horse but was hoping someone might have some insight into why SCOM Report Server install is failing. I am using a domain account for SCOM 2012 R2 services in a distributive environment
with 2 management servers and 2 SQL servers…one for Ops db and one for DW db.
Install was failing on selecting the management server. Research led me to
Kevin Holman's site. I followed his doc and SPN are set per your config and can telnet to MGMT1 on 5723…firewall is off on all servers. I am a domain admin and scom.mgmt account (MSOMSdkSvc) is a local admin on the MGMT servers.
>setspn -l domain\scom.mgmt
Registered ServicePrincipalNames for CN=scom.mgmt,OU=Service Accounts,DC= domain,DC=net:
MSOMSdkSvc/SCOM-MGMT1
MSOMSdkSvc/SCOM-MGMT1.domain.net
MSOMSdkSvc/SCOM-MGMT2
MSOMSdkSvc/SCOM-MGMT2.domain.net
>setspn -l domain\scom-mgmt1
Registered ServicePrincipalNames for CN=SCOM-MGMT1,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/SCOM-MGMT1.domain.net
TERMSRV/SCOM-MGMT1.domain.net
WSMAN/SCOM-MGMT1.domain.net
RestrictedKrbHost/SCOM-MGMT1.domain.net
HOST/SCOM-MGMT1.domain.net
MSOMHSvc/SCOM-MGMT1
TERMSRV/SCOM-MGMT1
WSMAN/SCOM-MGMT1
RestrictedKrbHost/SCOM-MGMT1
HOST/SCOM-MGMT1
>setspn -l domain\scom-mgmt2
Registered ServicePrincipalNames for CN=SCOM-MGMT2,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/ SCOM-MGMT2.domain.net
MSOMHSvc/ SCOM-MGMT2
WSMAN/SCOM-MGMT2.domain.net
WSMAN/SCOM-MGMT2
TERMSRV/SCOM-MGMT2.domain.net
TERMSRV/SCOM-MGMT2
RestrictedKrbHost/SCOM-MGMT2
HOST/CHH-SCOM-MGMT2
RestrictedKrbHost/CHH-SCOM-MGMT2.osi-asp.net
HOST/CHH-SCOM-MGMT2.osi-asp.net
>setspn -l domain\scom-ssrs
Registered ServicePrincipalNames for CN=SCOM-SSRS,OU=SCOM SQL,OU=SCOM,OU=CHH-INTERNAL,DC=domain,DC=net:
WSMAN/SCOM-SSRS
WSMAN/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net:1433
TERMSRV/SCOM-SSRS.domain.net
TERMSRV/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS
HOST/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS.domain.net
HOST/SCOM-SSRS.domain.net
When I point to the MGMT server, I keep getting “Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are
all the same version”.
OpsMgrSetupWizard.log states…
Info:
:Could not connect to Management Server: scom-mgmt1.domain.net with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long.
Info:
:StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result) at System.Version..ctor(String version) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.IsManagementServerCurrentVersion(String
managementServer) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.CanConnectToManagementGroup(String managementServer)
When I searched on "Exception.Message: Version string portion was too short or too long" it led me to .Net strings in the reg. i deleted all refs to older versions (3.x) but still no good.
BobWell, I’m back to trying to get SCOM Report Server up and running. This time I decided to try the command line silent install and rely on logs to debug. But it still fails.
This is the script: SETUP /install /InstallPath:D:\Program Files\Microsoft System Center 2012 R2\Operations Manager /components:OMReporting /ManagementServer:<server>.<domain> /SRSInstance:<instance> /DataReaderUser:<domain>\<account>
/DataReaderPassword:******** /SendODRReports:0 /UseMicrosoftUpdate:0 /AcceptEndUserLicenseAgreement:1
When I run the script, I get a pop-up: “System CenterOperations Manager Setup has stopped working with the following:
Problem signature:
Problem Event Name:
CLR20r3
Problem Signature 01:
setupchainerui.exe
Problem Signature 02:
7.0.5000.0
Problem Signature 03:
522a5b85
Problem Signature 04:
mscorlib
Problem Signature 05:
4.0.0.0
Problem Signature 06:
53b4fc1e
Problem Signature 07:
e4d
Problem Signature 08:
5a
Problem Signature 09:
System.FormatException
OS Version:
6.1.7601.2.1.0.274.10
Locale ID:
1033
Additional Information 1:
4911
Additional Information 2:
49111a576c61a461b7f2900e4224563c
Additional Information 3:
a1e6
Additional Information 4:
a1e62e9c159c1d7601a31ccff83dbf94
App Event Log:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:39.000000000Z" />
<EventRecordID>4999</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>Application: SetupChainerUI.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception.
Exception Info: System.FormatException Stack: at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:41.000000000Z" />
<EventRecordID>5000</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>SetupChainerUI.exe</Data>
<Data>7.1.10226.0</Data>
<Data>522a5b85</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18409</Data>
<Data>5315a05a</Data>
<Data>e0434352</Data>
<Data>000000000000940d</Data>
<Data>a64</Data>
<Data>01d03bf626a03a7a</Data>
<Data>C:\Users\USER NAME\AppData\Local\SCOM\Setup\SetupChainerUI.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:03:27.000000000Z" />
<EventRecordID>5001</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>0</Data>
<Data>CLR20r3</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>setupchainerui.exe</Data>
<Data>7.0.5000.0</Data>
<Data>522a5b85</Data>
<Data>mscorlib</Data>
<Data>4.0.0.0</Data>
<Data>53b4fc1e</Data>
<Data>e4d</Data>
<Data>5a</Data>
<Data>System.FormatException</Data>
<Data />
<Data />
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_setupchainerui.e_9724aaa8eec4ffba07c27fea369e612e949d75_5b269652</Data>
<Data />
<Data>0</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
<Data>0</Data>
</EventData>
</Event>
OpsMgrSetupWizard.log
[13:48:16]:
Error: :Uncaught Exception: Threw Exception.Type: System.FormatException, Exception Error Code: 0x80131537, Exception.Message: Input string was not in a correct format.
[13:48:16]:
Error: :StackTrace:
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
at Microsoft.SystemCenter.Essentials.SetupFramework.PropertyBagDictionary.GetProperty[T](String property)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ValidateBureaucraticSwitches()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.ValidateSilentInstallCommandLineOptions()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.Rationalize()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.RationalizeGeneralInstall()
at Microsoft.SystemCenter.Essentials.SetupFramework.Program.RationalizeInstall()
at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()
Any ideas? I feel like I’m just going in circles…Bob -
My imac running OS 10.6.8, and want to install Garmin software that needs OS10.7.
The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac".
I feel an older upgrade than Maverick might be better for my machine?
Is it possible to upgrade to ie, 10,7? or another recommended upgrade.
How to proceed?Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
The Data access service not running or not yet initialized.
Hello guys ,
i am getting the following error wen tryin to open the console The Data access service not running or not yet initialized. on scom 2012 R2 before it was working fine but once i closed the console and open got the error
OS : Windows 2012r2 patched and scom 2012 r2
sql : 2012 r2 enuff database size
tried few things as :
1. change the account to domain admin for system center data acess service still no luck
2. created registry keys for servicepipetimeout to 6000 bt still nit working
3. Refresh sql account used for sccom data aceess service still no luck
4. the service disappears as running after 30 seconds and the console is unable to open
kindly help if some perfect resolution as lot of time has been wasted and need to meet deadlines.
thanks guys in advance
Basit Siddiqui
AIGCheck that following:
Verify permission of SCOM Account on sysadmin and OM DB.
Check firewall that is disable
Check antivirus that didn't block scom folders or services.
Check SQL services is running
Check Space of database at 5 GB as you configured. It is best practice to set the db size at a reasonable size and not to set to autogrowth.
Also you can check below link
http://vmajmudar.blogspot.com/2013/07/the-data-access-service-is-either-not.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali -
Where is the data file for the address book located, I need to restore mine from backup but don't know where it is to do so. Putting my Mac Pro onto icloud synching contacts resulted in duplicate and triplicates of the same cards. I have a few THOUSAND contacts and the last time this happened was on mobile me. that had a function where you could replace info on the mobile me server with info on the computer. I see no way to do that on the new cloud.
In the stupidly hidden user's Library->/Application Support/AddressBook/ labeled as AddressBook-v22.abcddb
For TM restores, see Pondini's TM FAQs for starters, since I don't use TM. -
Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
(ON the Phone) Sticky note like program WM5
I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
Thanks.Hi,
I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
Regards,
Zoltán
http://www.clamagent.org - Free Antivirus for Exchange
http://www.it-pro.hu
http://emaildetektiv.hu
Maybe you are looking for
-
Any help or direction?
-
Display Table contents using HTMLB...Urgent Help Plz...
Hello All, Im working on EP SP14 and SQL Server 2000. I have successfully established database connection. I want to know <b>how can I display Table contents using TableViewModel in HTMLB</b>. Please help. Its urgent. Awaiting Reply. Thanks in advanc
-
Problem adding music to my phone
When ever I try to add music to my phone, it prepares to sync but then skips syncing and say that it is copying diagnostic information and then goes back to try and sync. After that it trys to add the music then just deletes all the music I already h
-
Iphone6 not charging ... Charging port not working
I Bought iPhone 6 recently and it started acted funny with charging. It would charge only if I pally pressure on the cable at certain angle. Then I tried changing cables to even new ones and the pproblem did not go away. Then I visited the Apple stro
-
Must declare the Scalar variable *@prompt*.. (IES 10901)".
Hi, I am getting an error: "Database error Must declare the Scalar variable *@prompt*.. (IES 10901)". backend: SQLServer The dim, Lovs are valid in IDT universe. There is a Fiscal Year Month Dim in Universe=SELECT cast(convert(varchar(6),DATEADD (Y