Where is the Dual Core version of X100e that has been promised!!

Where are the x100e units with AMD Neo x2 dual core that has been promised?? The Lenovo Australia website has them for sale but nothing in the USA. What the heck is going on here??? How much longer does Lenovo think they can get away with selling new laptops with old 65nm chips in them?? By the time these Neo X2 units come out the AMD Neo x2 65nm chips which they use will completely be dismissed by the public. It just seems Lenovo is helping AMD dump some very old stock of 65nm silicon. Hey Lenovo its 2010....65nm laptop chips have around since 2006.....release the Neo x2 version of the x100e soon before its too late...

It's actually quite small, and I'm not sure why people are always complaining about bezels, I've never even noticed it, as I look at the screen and not the bezel surrounding it. Even the dual core atom isnt going to touch the performance of a C2D.  Show me the X300 for $750 US new, X200 was the clear choice there.  CD-ROM is obsolete as far as I'm concerned and SSD can be added aftermarket much cheaper, if desired.
"The x100e is FAR more compact unit than the x200"
X100e :  Dimensions: 11.1 x 8.2 x 0.6 – 1.2 inch; 3.3 lbs.
X200 : Dimensions: 11.6 x 8.3 x .8; 2.95 lbs.

Similar Messages

  • How do I edit the text in a pdf file that has been converted to a Word doc

    How do I edit the text in a pdf file that has been converted to a Word doc?

    Hi BridgetteJean,
    Please go through this video this explains how to edit text in a pdf document.
    http://tv.adobe.com/watch/acrobat-tips-and-tricks/editing-text-with-the-typewriter-tool/

  • After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I don't seem to have the "com.apple.garageband.plist" file that has been a common solution. Any suggestions?

    After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?

    Did you upgrade from SnowLeopard?
    I can't get passed the complete installation
    What exactly is happening? Is GarageBand trying to download over and over again?
    all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
    The property list stores your preferences, but also the settings from the last run of the application.  If that file is corrupted in some way, you might see third behaviour.
    You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
    Perhaps you did look in he wrong place.
    in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
    Quit GarageBand, if it is running.
    Click onto you Desktop to bring the Finder forward.
    In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
    Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
    Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
    If that does not fix the problem, post back and explain in more detail what the download problem is.
    Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
    Regards
    Léonie

  • How to find the parallelism degree of a query that has been finished?(10.2)

    We use Resource Manager, developers think that they can not get the parallelism they need for their queries because of the Resource Manager settings. I need to show them how many degree of parallelism each of their query have used, so I need a dictionary view to query this information. But couldn't find any relevant historical query information for this one, is there any dba_hist version of v$px_session on 10.2?
    Thank you.

    Thanks for this idea but I couldn't come to a point with it, any addtional comments are highly appreciated;
    SELECT qc_session_id,
           sql_id,
           to_char(sample_time,
                   'dd.mm.yyyy hh24:mi:ss'),
           COUNT(*) potantial_dop
      FROM dba_hist_active_sess_history
    GROUP BY qc_session_id,
              sql_id,
              to_char(sample_time,
                      'dd.mm.yyyy hh24:mi:ss')
    ORDER BY 4 DESC;

  • Will the apple store fix a phone that has been dropped and will no longer turn on?

    I dropped my iphone. The screen shattered, but the phone worked for about 30 min. After 30 minutes the phone won't turn back on.  I can tell that the screen is loose from the housing on the upper left side of the phone. The phone is an Iphone 6 16gb gold.

    Take it to an Apple Store and avail yourself of the out of warranty replacement option.

  • How do you get rid of the padlock symbol on an image that has been edited?

    When I edit all images in a file there is a padlock sign on each image.  How do I get rid of the padlock?

    Close the file in the editor before you go back to the organizer.

  • Can I get the serial number for a printer that has been stolen?

    I know that when I got the printer, I did an online registration.  Is any of that information available?
    I purchased it from Staples and I am looking for the receipt but no luck yet.

    If you registered the product you should be able to find the information through HP's registration information page here.  I just checked mine and it had devices going back about 10 years with the product types and serial numbers.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HT1349 How to find the serial number of my iPad that has been stolen?

    Hi all,
    My iPad's been stolen, and in part of the police report that I'm filing, the serial number of the iPad would be required.
    I do not have the packaging with me so I'm not sure how to retrieve this. Apparently I could use my Apple account, however, after logging in, I'm unable to find any such link that would help me retrieve this.
    Appreciate any ideas, guys.
    Thanks.

    Report to police along with serial number. Change all your passwords.
    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
     Cheers, Tom

  • When will the dual core x100e be available on Lenovo's website?

    When will the dual core x100e be available on Lenovo's website?
    I LOVE this laptop but 1.6ghz single core can not serve my needs. (I know is not meant to be very powerful  but dual core is a must for me) I would like to wait if it will be available soon.
    Also, can a SSD be swaped in instead of the 5400rpm dives they come with? I have a spare 64GB drive I purchased for my T60 and it would be nice to swap it into the x100e
    Let me know how soon the dual cores will be available please. Really excited to purchase and customize with solid state drive.
    Also some of the review videos online show the battery sticking out the back and others don't. Which is it?
    Thanks.

    I odered it on 01/20/10 and still waiting for it to arrive. Arrrg have to start a thread about this they have screwed by business trip big time

  • Where is the Public Sector version of ByDesign

    I recently saw new functionality available in ByDesign including Funds and Functions and encumbrances.  Now in 1402 I cannot find it anywhere.
    Anyone know what is going on?

    It's actually quite small, and I'm not sure why people are always complaining about bezels, I've never even noticed it, as I look at the screen and not the bezel surrounding it. Even the dual core atom isnt going to touch the performance of a C2D.  Show me the X300 for $750 US new, X200 was the clear choice there.  CD-ROM is obsolete as far as I'm concerned and SSD can be added aftermarket much cheaper, if desired.
    "The x100e is FAR more compact unit than the x200"
    X100e :  Dimensions: 11.1 x 8.2 x 0.6 – 1.2 inch; 3.3 lbs.
    X200 : Dimensions: 11.6 x 8.3 x .8; 2.95 lbs.

  • How loud should the Dual core 2GHZ machines be?

    I just purchased the dual core 2GHZ last night and after reading so many people say these were so quiet, I was expecting quiet.
    I have to agree this is much better than my dual 867 G4, but I wouldn't call it quiet. I am using it for audio and was so excited that thay finally found a way to make them quiet. I am now disappointed.
    Does anybody know what the normal db rating is for these and where I should be tested as far as where I should be placing the noise level meter to see if this is within specs or if I got a bad one.
    Any help would be great.
    Thanks

    I got a Dual 2 Ghz (separate processors) so I would assume mine is noisier, but I'll tell you what I've learned.
    1: It seems the one PCI slot video cards are the nosiest, making the PCI slot fan/speaker combination make a lot of noise right in front of the machine where you'll hear it all too clearly. The two slot PCI video cards are quieter because of their bigger fan.
    2: The Superdrive makes the most noise when a cd/dvd is in and being used.
    3: The drivebay fans are set to a minimum 1000 RPMs, provided you have a cool room (-75ºF) much more over this they will kickup and make noise along with all the other fans.
    4: The CPU fans are a little bit tricky, with some OS X updates "something" gets reset and then the fans will rev up and down at the slightest provocation. This can cause considerable noise and attention. Most times the fan will settle into one constant speed which is better than the annoying revs.
    So it depends a lot upon where a sound reading is taken and what kind of hardware and room temps.
    My Dual 2, measured from the front grill middle, no active Superdrive, in a -75ºF room, with the remaining PCI slot covers removed, gets a sound reading of 58 db at point blank range.
    A eMac 800 I had was getting a constant 72 db as measured from the rear fan exhaust area. It was a vacuum cleaner in comparison to my Dual 2.
    If you need absolute silence, I suggest a server box or placing the Tower on the opposite side of the wall and routing cables through a small hole. Get a external cd/dvd drive.

  • What/Where is the 32-bit version of Windows System Image Manager?

    I'm running into the problem described as follows in the WAIK documentation:  "Windows SIM fails to create a catalog for a 32-bit Windows image from a 64-bit version of Windows SIM. To workaround this issue, use the 32-bit version of Windows SIM to
    create catalogs for your Windows images."
    Question: Where is the 32-bit version of Windows SIM? I can only find a single download for "The Windows® Automated Installation Kit (AIK) for Windows® 7"
    Or are the 32-bit tools included in that version? If so, how do I use those instead?

    Hi,
    The issue should occurs when you install the WAIK on a 64bit Windows 7 machine.
    You need install WAIK on a 32bit machine.
    Different binary versions of Windows SIM cannot create catalog files for some Windows images of different architecture types. We recommend using the
    32-bit version of Windows SIM to create catalog files because this version can create catalogs for all Windows image architecture types. The following list describes the Windows SIM architecture types and catalogs that can be created for each Windows
    image architecture type.
    x86 Image Manager. Can
    create catalogs for x86, x64, and Itanium-based Windows images.
    x64 Image Manager. Can
    create catalogs only for x64 Windows images.
    Itanium-based Image Manager.
    Can create catalogs only for Itanium-based Windows images.
    This article may helpful to you:
    http://technet.microsoft.com/en-us/library/dd744249(WS.10).aspx
    Hope that helps.
    Regards,
    Leo  
    Huang
    Leo Huang
    TechNet Community Support

  • Where is the Mac downloadable version of Adobe Acrobat 7 Pro that doesn't require activation

    I purchased Adobe Creative Suite 2 Premium, it cost more than €2,000. When I recently tried to re-install it due to having to reformat my hard drive I could no longer activate it over the phone or online.
    When I rang the help number it directed me to the downloadable versions that don't require activation. Great! UNTIL I realise Adobe Acrobat 7 Professional is only available for Windows as a download.
    Where is the download for the Mac Version as it not included in the bundle either. This is extremely urgent. Thank you in advance.

    To maswatson
    The answer to your question of March 12, 2015 – "Where is the Mac downloadable version of Adobe Acrobat 7 Pro that doesn't require activation[?]" – is … nowhere. That doesn't mean it's not available to you, however. I have successfully installed several CS2 programs and Acrobat 7, on two computers.
    The hard drive on my MacBook Air crashed recently. After a new drive was installed I had to reload various programs, including CS2 Premium. I used the original disks and the serial number on the package.
    When I tried to open InDesign, however, I got an "Activate Using the Internet" message which led to an "Activation Server Unavailable" message that gave me three options, the last of which was "Click the Phone Activation button to activate the product over the phone." I called the toll-fee number and heard the following recorded message: "We no longer support activation issues over the phone."
    So I searched the Web, figuring that others had encountered and solved this problem. Eventually, I found "Creative Suite Help / Download Acrobat 7 and OS2 Products" at https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html#.
    I also found "How to Fix Adobe’s “Licensing for this product has stopped working” Error by Aaron Nelsen at http://hijinksinc.com/2010/01/20/how-to-fix-adobes-licensing-for-this-product-has-stopped- working-error/. He writes "… you MUST delete adobe_00080000_tsf.data and adobe_00080000_event.log" which is found in /Library/Preferences/FLEXnet Publisher/FLEXnet. So I did that.
    I also deleted Illustrator CS2, InDesign CS2, and Photoshop CS2 from my Applications folder. I did not delete Acrobat 7 or GoLive.
    After clicking on "English" at https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html#, I downloaded Illustrator CS2 for Mac, InDesign CS2 for Mac, and Photoshop CS2 for Mac. I was not able to download Acrobat 7 because the only option is for Windows. As you know, there is no download for Mac.
    Illustrator CS2, InDesign CS2, and Photoshop CS2 all opened without any problems. When I tried to open GoLive, I got the same "Activate Using the Internet" message I got at the outset, when I tried to open InDesign. I proceeded, and now have a 30-day trial. The same limitation has been placed on Illustrator, InDesign, and Photoshop, because I downloaded them, whereas GoLive was installed from the CS2 disks.
    Next, I opened Acrobat 7.0 Professional – the one installed from the original CS2 disks. It works fine.
    BOTTOM LINE: If you want Acrobat 7.0 Professional, install Creative Suite using original CS2 disks, then delete the other CS2 programs from those disks. If you want Illustrator CS2, InDesign CS2, Photoshop CS2, and others, download them from https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html#.
    I am hoping this explanation will help you. I feel great sympathy for you because the "answers" you received have been obtuse and clearly less than helpful. (I requested a "Yes," "No," or "Don't know" answer to a very straightforward question, but didn't get it.)
    My experience tells me that the answer to your question "Where is the Mac downloadable version of Adobe Acrobat 7 Pro that doesn't require activation[?]" – is … nowhere, but you don't need to download it. It's on the original disks and it does not require activation. That's why Adobe did not included it with the Windows version at https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html#.
    I hope this answers your question, solves your problem, and ends your frustration.

  • I am trying to download CS5.5, which I purchased. But I can only find the upgrade software to download. Where is the non-upgrade version of CS5.5???

    I am trying to download CS5.5, which I purchased. But I can only find the upgrade software to download. Where is the non-upgrade version of CS5.5???

    There is no upgrade version.  The serial number that you use dictates whether or not the software is treated as an upgrade.  If you purchased it as an upgrade then the serial number you have is an upgrade serial number and that will require you to provide proof that you qualify ro install/use the upgrade.

  • MacBook Pro Retina 13" - Can i upgrade the dual-core i7 to quad-core i7 CPU?

    MacBook Pro Retina 13" - Can i upgrade the dual-core i7 to quad-core i7 CPU?  (obviously not talking about BTO, but about "self-service" upgrade ...)

    Yeah it is soldered. So no upgrade possible. Found here: http://www.everymac.com/systems/apple/macbook_pro/macbook-pro-retina-display-faq /macbook-pro-retina-display-processor-ram-expansion-slots.html
    Thanks Jon P D !

Maybe you are looking for

  • Error while creating DocumentBuilderFactory object for parsing XML string

    When I try to execute the following statement in an EJB class, DocumentBuilderFactory df=DocumentBuilderFactory.newInstance(); I get the following exception: javax.xml.parsers.FactoryConfigurationError: Provider org.apache.crimson.jaxp.DocumentBuilde

  • Question about witholding tax report S_PL0_09000447

    Hi, I have a question about the witholding tax report: S_PL0_09000447 For some vendors, no deductions are made, but the payments to those vendors should appear on the witholding tax report. How is the report being created? Kind regards, Linda

  • Create Validation in Application express 3.0

    Hi all, I am trying to create a validation for a text field but having some issues. Basically what I want to do, in a customer form when all the information filled up and click on create. it will check the customer identification number in the databa

  • How to open .prmdc files?

    Is there a way to open the metadata cache .prmdc files with PP??

  • [b]Printing reports, getting a final blank page[/b]

    Hi, I'm printing out various reports, however i always get a final blank page. Any ideas how to suppress this? Also I would like to get rid of the page number at the top of the page and url address at the bottom if possible. Thanks Khalid