Where is the "Edit Volume" box below the Timeline?

I would like to make audio level changes several times within an audio clip of my project. It is described/illustrated here:
http://multimedia.journalism.berkeley.edu/tutorials/imovie/audio/
However, I cannot find the box described. Is there some setting I need to toggle on to make this appear so that I can selectively adjust the audio level?

What is it you are trying to do. If you want to forward a message, you do this a different way now. You tap and hold on the message bubble and tap on More. It will select that particular message bubble. From there you can select others, then tap on the arrow in the bottom right corner and this will take you to the forward message screen.

Similar Messages

Where's the timeline key frames button in Elements 10?

I've just installed Premiere Elements 10 on my new iMac. I've noticed that the add/remove key frames button on the left of the video tracks in the timeline appears only in track one and yet, in illustrations on the help pages (and in earlier versions of PE) the button appears alongside each track.
So how do I make that button appear?
Many thanks.

My thanks for your interest. I have thanked Robert for his contribution.
Best wishes for the forum. It's a great asset.
Date: Tue, 22 Nov 2011 07:52:36 -0700
From: [email protected]
To: [email protected]
Subject: Where's the timeline key frames button in Elements 10?
    Re: Where's the timeline key frames button in Elements 10?
    created by Bill Hunt in Premiere Elements - View the full discussion
I would say that it's a programming Bug in the GUI display, as the Keyframe operations buttons SHOULD appear for all Tracks. However, Robert had the workaround. Bug Report. Note: PrE shows up in the Photoshop Family. Good luck, and thank you Robert, Hunt
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4040576#4040576
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4040576#4040576. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to tell where on the timeline or sequence the clip has been placed?

Is there a way that premiere pro CS4 can be configured to show where on the timeline (sequence) that the clips appear. As well as which sequence the clip is in.
It would be nice to be able to see that in the project panel for each clip listed there. 90 percent of Metadata there is of no interest to me, but this would be helpful.
I know, one should be able to look on the timeline and see clips but when there are many and several sequences it is time consuming.
Thanks

Hit the light grey bar after pressing down the little triangle and the CTI will jump to the position of the clip in the timeline.

Does it matter where on the timeline your buttons are?

   I am making a site and I do not want some of the buttons to show all of the time. So for example, I have four text buttons with Actionscript Mouse_Over from frames 1-40 on the timeline. At 41, they are gone and four new buttons come into play. When I test the movie, the second set of rollovers link up to the specified labels.
   I keep getting this"1009 error at frame ()1" message. I initially had the same problem with the first four buttons as I had them appear on the stage at frame 3. After I moved them to frame 1, the rollovers worked again.
   So is there a way to hide the second set of buttons until a specified time or do they have to start on frame 1?
   Is there a way you could view my Fla file to see if it is something I am just overlooking? All of my Script is correct.
   I appreciate any help in this matter.

Button placement matters in the sense that the code that is associated with them has to be where they are instantiated/needed. If you have code in frame 1 for the buttons, but they don't exist until frame 2, that code isn't working for them.
You can control the visibility of buttons by setting the 'visible' property true or false as needed. So you could have all the buttons in the first frame, making the ones that shouldn't appear until later invisible. Similarly, when you get to frame 41, you can make them visible and then hide the other four.

FCPX 10.1: where is the timeline indicator on the timeline ?

Hi there,
I am on FCPX Ver 10.1.
I just realised the time indicator in my timeline is missing. Usually it is displayed as something like a ruler.
How do I get it back ? Or it is missing in Ver 10.1 ?
Thanks

Yes Ian, I am referring to the time indicator as shown in the top grey rectangular box.
Trashing Pref doesn't help.
Any ideas ?
Thanks
Ian R. Brown wrote:
Is this what you mean?

Where is the timeline?

I can't make a timeline appear in CS3. Cliqued everywhere. Can anybody tell me how to make a timeline appear in CS3? Thank you.

Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Where to put Get URL on the timeline?

Ok if i have a symbol
and i double click it then can i put a get URL? Or where on the timeline
should it go.

Take your symbol, a movieclip or a button, and place it on the stage. Don't doubleclick it or anything, just have it selected and in the Properties panel assign it an instance name (where it says "<Instance Name>")... Let's say you name it "urlBtn", ...no special reason.
Make a new layer on the timeline and label it actions (or something to indicate it's a code layer). In the same frame as where the button is, but on the actions layer put your getURL code using the instance name you assigned...
urlBtn.onRelease = function(){
getURL(http://www....etc,"_self");

Whilst playing a selection from a CD I've put in my CD drive, I select Controls and then wish to increase the volume. It tells me to Press Control and then Up. Where is the Up button please ? Thank you.

My question is how do I increase the volume when playing a CD in iTunes. The volume slide is at full, but when I press Controls, it tells me to press Control and UP. Where is the UP on my PC or is it on the screen ??
Thank you.

It means the UP arrow on your keyboard. Depending on your keyboard, it is usually located on the right hand side of the keyboard, either with the numbers keys or below the Enter (Return) key.
However, Control/Up will simply attempt to move the slider in your iTunes programme further up. If the slider is already at the top, then those keys will have no effect, since the iTunes volume is already at maximum. Perhaps your computer's volume controls need adjusting.
In Windows XP, I believe (if I recall correctly) that the volume control is in Start/Accessories/ and either Volume or Mixer. In Windows 7, it's in Start/Control Panel/Hardware and Sound/Adjust Sytem Volume.

When downloading Adobe Reader, the Firefox instructions say to look for an "edit option" box. It does not appear and I am stuck.

I am trying to download Adobe Reader for the new Firefox and it says to look for the "edit options" box. I can not find one and am stuck
== This happened ==
Just once or twice
== I tried to download Adobe Reader

The instructions on the Adobe site for Firefox are out-of-date and only apply to older versions of Firefox. You have the most current version of Adobe Reader (ver. 9.3.2) shown in your plug-ins. For future reference, use the instructions below for updating or installing Adobe Reader. You can see your version in Tools > Add-ons > Plugins, look for "Adobe PDF Plug-In".
'''Install/Update Adobe Reader for Firefox''': your ver. 9.3.2; current ver. 9.3.2
Check your version here: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Start > Program Files, find and click Adobe Reader to open, click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-See the images at the bottom left of this post to see the steps to take on the Adobe site
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer.
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
Firefox_'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.17; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
Check your version here: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''Install/Update Adobe Flash Player for _: your ver. 10.0 r42; current ver. 10.1 r53 ('''important security update 2010-06-10''')
Check your version here: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND__''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Where on the box is the serial number? How many digits?

Trying to install Photoshop Elements 12 and need serial number. Three numbers on back of box, none identified as serial number. None are valid. Where is the required number? The help info is useless.

Hi Jim125,
The serial number consists of 24 digits.
Please refer to the below article to locate serial number.
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Thank you for posting on Adobe Forums.

The middle handle on the rectangle is not there anymore when I select it with the black arrow (v) tool. Show bounding box and edges are both on. Where dd the middle anchor go??

The middle handle on the rectangle is not there anymore when I select it with the black arrow (v) tool. Show bounding box and edges are both on. Where dd the middle anchor go??

haggyabeken,
I am afraid you have come across the Live Rectangle bug which is limited to the MAC versions starting with 10.7 and 10.8, but not 10.9 (Mavericks), see this thread linked to below.
https://forums.adobe.com/thread/1595973
So a switch to Mavericks with a reinstallation might be the way to solve it here and now.
To get round it in each case, it is possible to Expand the Live Rectangles to get normal old fashioned rectangles, or to Pathfinder>Unite, or to use the Scale Tool.
A more permanent way round that is to create normal old fashioned rectangles, after running the free script created by Pawel, see this thread with download link:
https://forums.adobe.com/thread/1587587

Where all the redo/archive log volume come from?

Hi,
I have a database with a size of around 50G. Thats not very much, but the crazy thing is that this database has a redo log volume per day that is nearly equal the size of the database:
-- Daily View
SQL> SELECT TRUNC(completion_time) AS time, ROUND(SUM(blocks * block_size)/1024/1024,2) AS size_mb, ROUND(SUM(blocks * block_size)/1024/1024/1024,2) AS size_gb FROM v$archived_log GROUP BY TRUNC(completion_time) ORDER BY 1 DESC;
TIME          SIZE_MB    SIZE_GB
2013-02-03    49599.7      48.44
2013-02-02   50104.63      48.93
2013-02-01   54466.36      53.19
2013-01-31   52935.41      51.69
2013-01-30   51596.85      50.39
-- Hourly View
SQL> SELECT TRUNC(completion_time,'HH24') AS time, ROUND(SUM(blocks * block_size)/1024/1024,2) AS size_mb, ROUND(SUM(blocks * block_size)/1024/1024/1024,2) AS size_gb FROM v$archived_log GROUP BY TRUNC(completion_time,'HH24') ORDER BY 1 DESC;
TIME          SIZE_MB    SIZE_GB
2013-02-03 23     160.68        .16
2013-02-03 22     163.73        .16
2013-02-03 21     195.65        .19
2013-02-03 20    4492.44       4.39
2013-02-03 19      176.3        .17
2013-02-03 18     4259.8       4.16
2013-02-03 17     226.99        .22
2013-02-03 16    5465.64       5.34
2013-02-03 15     166.47        .16
2013-02-03 14     165.05        .16
2013-02-03 13     253.33        .25
2013-02-03 12    9568.93       9.34
2013-02-03 11     391.14        .38
2013-02-03 10    9585.36       9.36
2013-02-03 09     160.02        .16
2013-02-03 08      200.1         .2
2013-02-03 07     166.66        .16
2013-02-03 06     267.45        .26
2013-02-03 05     309.26         .3
2013-02-03 04    1486.87       1.45
2013-02-03 03   11106.77      10.85
2013-02-03 02      318.1        .31
2013-02-03 01     147.47        .14
2013-02-03 00     165.47        .16
2013-02-02 23     160.17        .16
2013-02-02 22     159.25        .16
2013-02-02 21      205.9         .2
2013-02-02 20    4473.27       4.37
2013-02-02 19     124.64        .12
2013-02-02 18    4364.69       4.26
2013-02-02 17     295.02        .29
2013-02-02 16    5415.06       5.29
2013-02-02 15     166.22        .16
2013-02-02 14     166.83        .16
2013-02-02 13      84.62        .08
2013-02-02 12    9905.55       9.67
2013-02-02 11     418.31        .41
2013-02-02 10    9548.78       9.32
2013-02-02 09     166.51        .16
2013-02-02 08     204.88         .2
2013-02-02 07     167.37        .16I know that every database change produces redo, but why that much?
Is there a way to investigate further where all the redo information comes from?
Every 2 hours redo is backed up to tape.
There are no significant batches, shaking and shuffling the data around all the time.
Nearly all changes in this database is happening through user inputs.
Database is 11gR2 on Redhat 5.6.
Thanks
941743
Edited by: 941743 on 04.02.2013 15:32
Edited by: 941743 on 04.02.2013 15:33

I am afraid there is no easy and direct way to pull the answer from the data dictionary.
But with some work, you can get to the bottom of this.
This query shows you how much redo is used by the sessions in your system currently:
select a.sid , a.value from v$sesstat a, v$statname b
where a.statistic# = b.statistic#
and b.name = 'redo size'Unfortunately, I am not aware of a AWR view (license required!) that corresponds to v$sesstat, so it would not be easy to look back and see which session generated the redo.
One way is to troubleshoot the problem online, using a utility such as snapper- http://blog.tanelpoder.com/2010/03/22/oracle-session-snapper-v3-10/ . See which sessions generate most redo and see what SQL they are running at that time.
The other way is to create your own “repository”. Sample V$SESSION, v$sesstat , v$statname and possibly V$SQL frequently (every few seconds) and record how much redo and what SQLs are running by each session. Once you gather enough data, look which sessions had the biggest “redo size” delta and what SQL were they running at that time.
Iordan Iotzov
http://iiotzov.wordpress.com/

Does anyone know any apps or programs where you can edit voice memos? i.e.- reduce the amount of static

hey
so i decided to record some friends of mine as a joke. i was using the voice memos app on my iPhone 6.. i thought i put the phone down close enough to pick up everything, but it didn't quiet work out as well as i hoped. i ended up getting more static than voice.. does anyone know of a good app or program where i can edit this voice memo. reduce all that static and raise their voices to they can be audible?
hope y'all can help

Did you ever figure out how to fix this?

I am trying to update itunes but keep getting 'The feature you are trying to use is on a network resource that is unavailable - Click OK to try again, or enter an alternate path folder containing the installation package 'itunes64msi' in the box below'. ,

I am trying to update itunes but keep getting 'The feature you are trying to use is on a network resource that is unavailable - Click OK to try again, or enter an alternate path folder containing the installation package 'itunes64msi' in the box below'.
I am unable to install and also i cannot uninstall itunes, can anyone HELP PLEASSSSSSEEEEEE!!

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Youtube won't let me type in comment box below video, and keeps affecting the video when I hit keys. why and how can I stop it from doing that?

It seems whenever I use YouTube with Firefox, the YouTube video will only ever let me interact with it unless I go full screen then hit escape. if i don't, I can't type in the text box below the video. even stranger, if I go to a new tab and try to enter something into, say, Google, I can still pause and un-pause the you tube video, even in the other tab, just by trying to type in a text box. Why is this happened, and how can I make it stop? it is starting to get very disruptive.

Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox 14 are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
[[Flash Plugin - Keep it up to date and troubleshoot problems]]
[[Flash 11.3 crashes]]
[[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
http://forums.adobe.com/thread/1018071?tstart=0
http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
More, I would suggest creating a new Firefox profile for sanity [1]
Please tell us if this helped!
[1] http://kb.mozillazine.org/Profile_Manager

Where is the "Edit Volume" box below the Timeline?

Similar Messages

Maybe you are looking for