Where is the firewall rules file??

I had to tweak a bunch of firewall rules following this latest Apple security update (it broke my mail services). In the log (G5 Xserve running 10.4.11), it now says
"mail servermgrd_ipfilter:ipfw config:Error:Failure code returned by ipfw command: 64, message: Line 22: recv,xmit via require interface name or address"
but I only have 19 rules in my "Active rules". Where would this bad "line 22" be located?
Mike

I'm not sure about 1.5, but normally there isn't one. The defaults are just used unless there is one.
Look here
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/UIManager.html

Similar Messages

Where is the swing.properties file?

In J2SDK 1.5 beta, where is the swing.properties file.
The file is supposed to be located in <Java Home>/lib/ but it is not there.
Thanks,

I'm not sure about 1.5, but normally there isn't one. The defaults are just used unless there is one.
Look here
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/UIManager.html

HT1766 where is the Itunes backup file located in the computer ?

where is the Itunes backup file located in the computer?

Read here:
http://support.apple.com/kb/ht4946

Just where ARE the site definition files?

I've just received CS4. I want to move it to my more powerful laptop when I install it. I know how to do that and I can move site files, but where are the site definition files? I really don't want to have to set up each site from scratch. Is there one (or more) files that are the name, url, location, id, password etc for each of the (many) sites in CS3?
don Carlos

To import/export site definitions (not site files):
On the old computer:
Site > Manage Sites
Shift click to highlight all site names
Export..
Same procedure on new computer then Import..

On my mac should i turn on the firewall; and file vault or just leave them off?

On my mac should I turn on the firewall; and file vault or just leave them off?

Yes, you should turn on your Firewall, and in the advanced options, select 'stealth mode'.
Unless you want to encrypt your hard drive, you don't need File Vault and can leave it off.

In windows 7 where is the iPad backup file located?

In windows 7 where is the iPad backup file located?

iTunes places the backup files in the following places:
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

043: Unable to read the Software Rules file

hi,
I have the message "043: Unable to read the Software Rules file " that
appears on workstation object under Inventory tab, my software rule is
activated, their is no other options to activate for this rule, is there
other Nds objects that I need to configure for software scans?
thanks!

Dominic,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Can you resume an unfinished/failed Airdrop transfer? Where do the unfinished transfer files go? Thanks in advance!

Can you resume an unfinished/failed Airdrop transfer?
Where do the unfinished transfer files go?
I was 75% thru a 8 gig transfer before I had to stop. Just wondering if there's a way to resume instead of starting all over, otherwise I'll break up the files into smaller segments I transfer in the future.

Can you resume an unfinished/failed Airdrop transfer?
Where do the unfinished transfer files go?
I was 75% thru a 8 gig transfer before I had to stop. Just wondering if there's a way to resume instead of starting all over, otherwise I'll break up the files into smaller segments I transfer in the future.

Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits?

Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits? Using iMac, OS X, most recent Aperture and Lightroom 5.7 with plugin for Aperture.

Define "the Aperture files".
Read this concise guide.
The files you imported into an Aperture Library can be exported (at any time, and repeatedly) using the command "File ▹ Export ▹ Originals". Your Originals are never altered. What went in is what comes out.
Adjustments and changes to the metadata that you made since creating an Image in Aperture by importing a file are saved to a text file. This file is combined, on-the-fly, with the Original to create the Image that you see in Aperture. There is no file saved to disk that is the full-size Image. Thumbnails are saved, and Previews are saved. These are JPG files, almost always smaller than the Original. They are not substitutes for the Image for the use you have.
When you need a file of an Image to use in another program, you export the Image from Aperture. "Export" means "Make me a file of this Image according to these file specs I'm providing". The way to get files of your adjusted Images is simple: create them by exporting. Specify "Original size", and use a loss-less image-file format (e.g. TIFF 16-bit) if you want to retain as much visual information as possible.
Search the Web for information about transitioning from Aperture to Lightroom. Note that I say "transitioning". You cannot move a database from one format to another without significant changes, and likely some loss of information. Adobe provides a tool and some instructions. I strongly recommend working out the process step-by-step, and then proceeding with first a few Images, then a bushel-ful, and stopping to use the first few, the the bushel-ful, before committing your entire collection to the process.
As always, never use any computer file without having a back-up.
We have seen mixed reports here of the success of the LR tool that creates a LR database from your Aperture database.
If you want to carefully define the process, and test and refine it, use the excellent process-development, analysis, and execution program inShort.
Sadly, there is not and can never be a good, thorough re-positioning of the digital assets in your Aperture Library to become digital assets in a LR database. Just as a metaphor for any user contemplating transitioning to another digital asset manager: that would be like digging up a house in one country, planting it in a hole in another country, and expecting to be able to use the toilet and the sinks, turn on the lights, cook dinner, and sleep soundly.
HTH,
Kirby.

How to get an account with an IsICP -"R" attribute calculated in the HFM Rule file

Till recently everything was going fine with the calculations in our HFM setup ( Version 4.1)
We have say around 8 Expense accounts which roll up into a Parent account say ALL446 which finally rolls up into Operating Expenses.
Operating Expenses
|__ parent account
      |_INVALO
       |_ALL446
          |__222446
          |__242446
And we have a calculation in the rule file as below
HS.EXP "A#BE FIXED COST = A#Operating Expenses +A#SGA - A#BE VC OP F10"
This was calculating correctly till we did the below change
Added IsICP attribute to couple of accounts say 222446 and 242446 ( in the above example) in the metadata which finally rolls up into Operating Expense.
Note: we did not add any Plug account attribute to the accounts
Now the problem what we have in hand is -> Fixed Cost is not calculating correctly.- It happens that the two accounts for which we added the IsICP are not showing up in the calculation and the data in those two accounts are not adding up in Fixed Cost.
POV in GRID/Excel -> actual,2013,periodic,<Entity Currency>, ICP Top, AllCustom1, AllCustom2, AllCustom3, None( for custom4)
But when we retrieve Operating Expenses in Excel - it is showing the correct amount, even in the grid - but looks like when the rule tries to calculate Fixed Expenses using the above rule - these accounts are not adding up in the Operating expenses.
I tried the formula ( to check what number is coming into Fixed cost ) - the result is zero - But in the grid/excel I see amount for acct2. Same POV as above
HS.EXP "A#BE FIXED COST = A#222446"
and if I add & Tops to the account like below ( getting some weird number instead of what is there in acct2)
HS.EXP "A#BE FIXED COST = A#222446" & Tops
Questions:
1) Where exactly I am going wrong ?
2) Is it MANDATORY to have a Plugaccount attribute when we have IsICP turned to "R" ?
3) What will happen if we do not have a Plugaccount for the IsICP account ?
4) How to correct the formula to make sure I get the number in the acct2 into Fixed Cost??
5) Do we need to have the IsICP turned on to the immediate parent of the account having IsICP and the Top parents of the account too??
6) Is it possible to get the exact number what we have in 222446 into BE Fixed Cost account via Rule?- why I am not getting it
Notes:
BE Fixed Cost-> account type -"Expense", IsCalculated - yes, IsConsolidated - yes, IsICP- N, Custom1TopMember - AllFunctions, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
Operating Expenses->"Expense", IsCalculated - No, IsConsolidated - yes, IsICP- N, Custom1TopMember - AllFunctions, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
INVALO ->"Expense", IsCalculated - No, IsConsolidated - yes, IsICP- N, Custom1TopMember -none, Custom3TopMember- none,
enabled allcustom1,2,3,4aggregations
Problematic account 222446 -> "Expense", IsCalculated - No, IsConsolidated - yes, IsICP- R, Custom1TopMember - Operations, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
The Entity on which I am trying to get the data( mentioning wherever I have attributes for this entity)
DefCurrency - DEM, Allowadjs- enabled, IsICP - enabled, Userdefined 2 - financial, - SecurityasPartner attribute - is not selected through out the applicaiton.
Variable
Tops = ".I#[ICP Top].C1#AllCustom1.C2#AllCustom2.C3#AllCustom3.C4#[None]"
tried attaching the attachments ( but service is unavailable)
Waiting for all of your valuable suggestions..

1) why was I not getting the formula right when I use & Tops
I'm assuming that BE Fixed Cost has N for IsICP, in that case you can not write to invalid intersections as it would attempt to use the same ICP information
2) Is it MANDATORY to have a Plugaccount attribute when we have IsICP turned to "R" ?
No
3) What will happen if we do not have a Plugaccount for the IsICP account ?
It will not run eliminations
4) Do we need to have the IsICP turned on to the immediate parent of the account having IsICP and the Top parents of the account too??
If you want it to rollup, yes you would need that. We have all Parent accounts as isICP set to Y and top member to ICP Entities so that they roll up
5) which will have priority the rule or the Grid where we have the calculated member like the BE Fixed Cost - because in the grid I had icptop, allcustom1,2 3 and when had & Tops to the account - I got some weird numbers...
I'm not following the question here, grids are just really a display mechanism, rules will handle all of the calculations.

Ensure that the firewall rules are activated every time you restart

I'm trying to set up a server and the Getting Started guide recommends doing this but it doesn't have Arch-specific instructions. How do I go about doing this?
The Debian/Ubuntu way which seems simple to me is :
sudo nano /etc/network/if-pre-up.d/firewall
and then copy this into the file :
#!/bin/sh
/sbin/iptables-restore < /etc/iptables.firewall.rules
And then making it executable for the current user/group.
Will this work on Arch? I'm just trying to be cautious.
What's the Arch way for re-instating rules upon a complete reboot of the system?

Well, there's iptables-save and there's
$ cat /usr/lib/systemd/system/iptables.service [~]
[Unit]
Description=Packet Filtering Framework
[Service]
Type=oneshot
ExecStart=/usr/bin/iptables-restore /etc/iptables/iptables.rules
ExecReload=/usr/bin/iptables-restore /etc/iptables/iptables.rules
ExecStop=/usr/lib/systemd/scripts/iptables-flush
RemainAfterExit=yes
[Install]
WantedBy=multi-user.target
Last edited by lucke (2015-01-20 21:42:59)

Variable in the Load Rule file

Hi,
We're running EAS 9.3.1 and trying to update a load rule to include a substitution variable in the header. The load rule works fine when the member name is defined explicitly and the variable works fine in the calc scripts. Any ideas? I tried removing the quotes and the & symbol already. See error below.
Reading Rule SQL Information For Database [Plan1]
Reading Rules From Rule Object For Database [Plan1]
Unknown member [&CalcVersion] found while processing string ["Budget","&CalcVersion","Load","Functional"]
Unexpected Essbase error 1019026
Thanks.

Did you remove the quotes by using the replace in "field Properties" and Global properties tab? I am trying to replace double quotes with null in the data file and it does not seems to be working.
Thanks
Yagna

Where is the bookmarks.html file ?

My customers PC crashed. I try to copy the Bookmarks to a new PC. I can not find the right bookmarks.html file, only the default and th bookmarkbackups directory with those *.json files.
BTW: is there some intelligible reason, why the bookmark file of Firefox as well as the mail-directories in Thunderbird are in a directory structure hidden from the user ?!

Hiding the appdata or roaming path in Windows is Microsoft's doing, not Mozilla. Other than IE, every other browser I have ever used has stored bookmarks in their own set of folders in the appdata or roaming file path.
The bookmarks.html file hasn't been used for storing since the Firefox 2.0 versions, in later versions it is used to install the default bookmarks primarily when the user creates a new Profile and upon the initial installation of Firefox, and it also is part of the process of "importing" bookmarks from other browsers the user may have installed.
The '''places.sqlite''' file is where bookmarks and browsing history is stored in Firefox 3.0 and later versions.
See this:<br />http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Vista & Win7: <br />
''drive'':\Users\''Windows login user name''\AppData\Roaming\Mozilla\Firefox\Profiles\''profile_name''

Where is the Scheduler log file located?

I'm trying to track down and diagnose this error in my scheduling/bursting:
Error!! Could not deliver the output for Delivery channel: EMAIL. Please check the Log for error details...
But a search of my entire drive does not reveal any file with a .log extension that has been updated recently, nor do I see a reference to the location of said log file anywhere in the documentation.
Where is the log file to which this error message is referring? Running the OBIEE Suite 10.1.3.4.1 under Windows.
Thanks!

Hi Mthompson,
Look at this on how to create the log file.
http://winrichman.blogspot.com/search/label/xdodebug
am sure, you did not create the email/smtp configuration, thats why you see this error.

Where is the user trace file?

I have issued the statement below to enable sql trace in session 260 ,and it execute successfully.but i can not find where the trace file in directory $ORACLE_BASE/admin/testcs/udump (testcs is my database name).
SQL> execute dbms_system.set_sql_trace_in_session(260,34880,true);
PL/SQL procedure successfully completed.
where is the trace file?
By the way,how can i find the information about the package DBMS_SYSTEM which is not in ORACLE references?

Did you issue some queries after turning tracing on? The trace file might not be created until there is some activity in the session.
I know that DBMS_SYSTEM is documented in the O'Reilly Press book "Oracle Built-in Packages" by Feuerstein, Dye & Beresniewicz.
However for tracing I think that Oracle expects you to use the dbms_support package:
execute sys.dbms_support.start_trace_in_session -
(sid => &sid, serial => &serial, waits => true, binds => true)Or for Oracle 7.3.4 or 8.0 you can use oradebug. Example:
select pid, spid, username from v$process;
PID SPID USERNAME
8 25807 oracle
SVRMGR> oradebug setorapid 8
-- or -
SVRMGR> oradebug setospid 25807
-- turn on
SVRMGR> oradebug event 10046 trace name context forever, level 12
-- turn off
SVRMGR> oradebug event 10046 trace name context off

Where is the firewall rules file??

Similar Messages

Maybe you are looking for