Where is the Image when I click to open a psd file?
When I click on File>Open and get the list of files, in previous versions an image of the file I clicked on would open under the Image Sequence Box, whether it was checked or not, and give the file size. Where is that in CS6? I can't find it nor could I see anything in preferences I needed to check. I know it has nothing to do with Image Sequence it is just that it appears under it. Thanks
It's been removed from the Photoshop CS6 File Open dialog, because the thumbnail functionality and ability to preview the size are available through the dialog itself (if you install the proper codecs). Unfortunately, Adobe doesn't provide codecs for its formats and getting manufacturer-supplied codecs for raw files is a bit iffy as well.
Some time ago I found a decent solution, though it costs about $20 as I recall... FastPictureViewer Codec Pack will provide thumbnails and previews for virtually any image file type.
In this example I'm hovering the cursor over a .psd file and it's showing me the size info.
-Noel
Similar Messages
-
When I try to open a PSD file, Photoshop opens the new file dialog box instead
This does not happen with all files, but I have a few that have become corrupted it seems. I have previously opened, edited and saved these files without any difficulty, but now they will not open.
This is what Photoshop shows when I try to open the files
For the affected files, it does not matter if I open my Library and click on the file, or click File>Open within Photoshop. The same thing happens.
If I click OK, then a blank file opens.
Any ideas on how to fix the file?These file may be corrupt if Photoshop CS6 works otherwise. If you upload them to a file sharing server and post a link to them I will download them and see if I can open them in the versions of Photoshop I have installed on my machines.
-
thx
That's what it means. The program cannot be run on your Mac. It is old PowerPC code. You need to get a version that will run on an Intel-based Mac.
-
Why does cs6 freeze when i try to open a psd file?
I have two files that will not open, the program just freezes and i have to control alt delete out. how can i open this file?
These file may be corrupt if Photoshop CS6 works otherwise. If you upload them to a file sharing server and post a link to them I will download them and see if I can open them in the versions of Photoshop I have installed on my machines.
-
How to enlarge the image when the mouse is clicked
I want to enlarge the image when the user click the image. How to do it by muse? Thank You!!!
Hi,
When you create a page in Muse called "Home" or "Gallery" or other else, when you export your site as HTML you must have a file called "home.html", "gallery.html" or "other else.html". Remember in what page you putted the Gallery in Muse and edit it with notepad, wordpad or similar and find the code where the gallery is linked (search the name of one of your images, is the best way to find it) and replace the code with something similar like that:
<code>
<a href="images/medidas06.jpg" rel="lightbox[gallery]"><img class="block ImageInclude" id="u3527_img" data-src="images/medidas06.jpg" src="images/blank.gif" alt="" data-width="248" data-height="360"/> </a>
</code>
The path to the JPG files must be ok with your website.
The other steps are well explained by the readme of the lightbox library
Regards -
I can see my thumbnails for my events in iphoto, but when I click to open the folder, no photos show up. However, when I hover over the thumbnail, it shows the flicker of images
that should be inside the folder, as well as # of images in each folder. It also occasionally says the following when I try to even open iphoto: "Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete." So, I am scared to hit "upgrade" for fear I will never recover any of the images as the wording in this quote seems odd. The photos are not in the trash. Did I lose them all? Do you know if/how I can retrieve them?iPhoto 08?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
Where is the "blur kernel" one click deblur in Photoshop CS6?
Where is the "blur kernel” one click deblur in Photoshop CS6? (Pretty sure it’s not there.)
Is deblur still in development? Or was it killed? Is there any status update on the progress of the deblur function? An overwhelming majority of the information available reference the same October 2011 Adobe Max conference demo.
(Adobe showed off the new deblur prototype at its Adobe Max conference in October during a set of feature sneak peeks...)
The way the feature was described was:
"The prototype feature uses a computer algorithm to analyze how the image was blurred and then creates what Adobe called a "blur kernel." After the kernel is generated, it can show you information such as what the motion trajectory of the camera was while the shutter was open -- causing the blur in the first place. The next step is to simply hit a "restore sharp image" button and the photograph is fixed."
It was cited by some sources as being an upcoming Photoshop CS6 feature while other sources were more vague with statements resembling "It's not clear if or when the new unblur feature will make it into a future version of Photoshop, as the company warned all sneak peek features were just prototypes with no concrete product plans."
Where is the latest with the Adobe Photoshop "blur kernel” and the Adobe Photoshop one click deblur feature?one of the things I think about as an engineer is that in order for something like this to work, you should probably start with manuals adjustments to processing the the out-of-focus blur first. after you have finished with this, you can do the motion blur. I would have to really think hard about it to see if there is an algorithm such as a kernel or something to convert an image into a path. one problem is you are stuck with the image boundaries. if they weren't there, things would be so much easier (but it would also take infinitely long to process). the image boundaries MIGHT skew the kernel, depending on how you handle the boundaries (for example, usually you just assume those values are black or 0's, or you may choose a 50% gray, whatever fits best with the kernel you are working with).
adobe may be on to something there, but they only had half of the equation with the idea.
I used to tinker with image processing many yarns ago back for fun in BASICA/GWBASIC.
if you have the kernel
[-2 0 2]
[-2 0 2]
[-2 0 2]
which amplifies vertical lines, you would want to handle the boundaries by processing them as 0's.
NOTE TO ADOBE: it might start getting into Machine Vision technology when you start doing the path recognition. or AI.
if you can get the imge into a path kernel, it's essentially a bitmap of a path. you can trace that path using akima spline curves. (will lose 1-2 samples off each end), but the tracing program might just exist out there somewhere. just google "bitmap to akima spline curve". and akima spline curve has all the
points along its path, unlike a bezier. I like akima spline curves, I have been trying to get ps engineers to use them for a while for good reason. this is one of them.
there are also cubic splines as an alternative.
chances are that the curve will have rounded corners due to the weight of the camera.
now that you have the path,it's simply a matter of taking samples along the curve wherever you want. (usually in an array which you can linearly inerpolate across the points in the array for simplicity if you want) -
i'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.
''rojere [[#question-1055991|said]]''
<blockquote>
i try to keep my thumb palms off the mouse pad when i am typing but every now and then my screen resizes larger or smaller until i take my left palm off the keyboard base its only when my left palm is resting on the base next to the touch pad. i type pretty fast so it gets annoying and yes it also jumps screens or reverts back to previous message and i have to choose ctrl z to undo and get back to my message i was typing... it also switches tabs on me as well... not sure why my palm being on the left of the keypad on the base should effect anything but it does after a while. and i have to stop what i am doing...and go to the firefox menu and change the screen size back down to 100% sometimes it goes up to 200-300 other times it goes down to 70-80% i find it annoying i i wish there was a way to turn off the screen resize in the setup panel. if its just left to be 100% i am happy with that... i don't need it to be bigger or smaller... there should be a way to LOCK it down... i understand that there are people out there with eye problems and needs to have the screen size increase using the + or - but there should be a lock so it just stays no matter what is happening on my keypad or touch pad or base of the pad... that screen size will not increase or decrease. unless i turn off the lock... perhaps this is something they can implement in the next version or do a quick update of the browser
</blockquote>
sorry that is all greek to me thanks for attempting to explain what you were trying to explain sorry i just not tech person to be able to understand or where to begin ... have good day and thanks for again trying -
Where is the image file size???
Where is the image file size in LR3? I can't see it anywhere neither in the Library module, nor in the Develop module.
As far as I know Lightroom does not display the file size. Keep in mind that LR never makes changes to the Original files that you import.
When you export a file with LR edits the file size generated will depend on the edits applied and the size and quality settings you choose in the export dialog. -
Hi,
Application shows - "The server refused the connection " when I click on project from ATG BCC and then layout. Can you please tell me the cause of the error and the log file where i need to debug. We have deployed on Weblogic Server.
ThanksHi,
You can see ATG server log, located at ATGXXX/home/servers/yourPublishingServer/logs, and you can see your wwblogic server log.
In WebLogic, the logs are located at domains/your_domain/server/yourPublishingServer/logs.
Check the logs and then return with it, so we can help you.
Hope it helps. -
Where are the Image Properties located?
Where are the Image Properties located? Recently watched a tutorial that suggested right clicking an image to see the Image Properties window. However, I am not seeing it. I am looking to add Image descriptions for better SEO. Thank you
Hello,
Is that image used as a fill in a rectangle ?
If you right click in a Image frame you will the option for image properties. look at the screnshot.
If you right click on a recangle that has an image used as a fill then you will not the option for image properties. look at the screnshot.
If there is anyother scenario you are talking about please let me know and i will look in to it.
Regards
Vivek -
When I click to open a photo it opens a black screen with a grey triangle, exclamation mark in the middle. How do I fix this problem?
Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
when i click to open firefox it says that "firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." and I've tried to shut down and restart my computer but it keeps showing the same message. I've even uninstalled Firefox and then reinstalled in the hopes that the problem would be solved but it this message is still popping up. What can I do to solve this problem?
== This happened ==
Just once or twice
== I was on facebook trying to upload pictures yesterday. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; InfoPath.1)Do you have a profile lock file in your profile folder? If so, delete it and see if TB runs properly:
http://kb.mozillazine.org/Profile_in_use#Remove_the_profile_lock_file -
When I click to open Mozilla icon on my desktop, the page does not open & I cannot access it unless I type it in an Internet Explorer page? When clicking on the Icon sometimes it will flash to the right of my desktop screen but does not open for access.
Hi Dave, thanks for your answer.
I have tried a several times to repairing permissions, restarting the mac, relaunched Finder, but no difference.
I copied the download folder to the dock...there I can open the files, but not deleting them or copying them.
When I open finder, then I click on the folder Download, after a while of thinking, it throws me out and back to the desktop.
already tried to sign in with the guest user account, then I am able to open the download folder.(but not seeing my files)
When I am trying to change the download folder in Safari, it also throws me out and gives me a error report ,for sending to Apple.
I think it's a settings fault or i think my download folder is locked. Almost desperat, already called support center,
They couldn't help, for free, due the 90 days free online help i have reached. If I want to solve this problem, they could try it , but it cost me almost 50 euros.
hope there is someone, who's knowing this problem.
By the way, I think it also could be that I dragged some downloaded music to the desktop, and dragged some folder that has the settings. Now its changed???
Or I was downloading something, and deleted the files in the download folder while it was unpacking and reparing the files.
It's not easy for a beginner Mac user (3 months) to already solve this problems.
Can you follow me? And seems this problem familiar to you?
Thanks in advance -
PC/64/Windows 7/XIStandard recently installed/unable to put footer into document because I can't move to the bottom of the image when in footer application mode. Display is at recommended 1920x1080. Is there a solution or is it a flaw in the program?
Don't have a direct answer. But did you install the updates. They might resolve the problem.
Maybe you are looking for
-
I have an ipod touch 2gen. I tried to upgrade to itunes software 10 on my computer. Upgrade failed. My ipod now appears as a camera in my computer. I removed all apple software, as instructed on the apple site. I then tried to reinstall the software
-
Background: our desktop computer started shutting off sporadically. I researched the problem, reset the memory chip, checked battery voltage on the motherboard (it was okay), resinserted the battery and tried to boot. It started up successfully and c
-
Hi, I'm currently working on a gantt chart and facing problem with the legend. I couldn't modify the legend accordingly. I have tried using the codes from <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a8/1cd93f5e0f9015e10000000a155106/framese
-
IPhone 3.1.2 Internet connection issues and iPod application crashes
Was having problems connecting to internet with 3.1 that could be fixed by switching to airoplane mode and back, but with 3.1.2 internet service drops out (even though the screen shows all bars and 3G) and the only way to get it back is to switch the
-
ME_JSP_SMOMO_CHECK_AUTHORITY function module is missing
Hi I am setting up a MI system with Web AS 6.40 sp 13 as middelware. As backend system I have an IDES client 4.6C sp 50, and PI 2004_1_46C: patch 0008. My problem is that I can't log in on the Mobile Web Console, I get the error: Access denied. No au