Where is the Linksys Wireless Network Monitor icon?

I was trying to follow some instructions and it said to click on the Linksys Wireless Network Monitor icon on the bottom right of my screen. There are a bunch of icons but none of them are this one or any other Linksys icon. I also searched the harddrive and couldn't find anything. Help!!!

Try uninstalling it and reinstall it back again.
If you're using windows XP,  plug in the adapter first and just install the drivers. No need to install the WLAN monitor.

Similar Messages

  • Linksys Wireless Network monitor overrides Windows XP Wireless Zero Configuration

    Hello all,
    I am currently using the wireless router Verizon sent me and it works fine when using the Windows XP Wireless Zero Configuration tool. Previously I was using a Linksys wireless router and I have the Linksys Wireless Network monitor installed. About half the time when starting up the computer, the Linksys monitor starts up and I have to manually switch to the Windows XP Wireless Zero Configuration tool. This is very irritating and I would like to know if there is a way I can remove the Linksys Monitor and still be able to use the Linksys wireless adapter cards installed in the computer.

    I think I know.
    #1 http://netsquirrel.com/msconfig/msconfig_xp.html
    #2 Very carefully, look through the list in MSConfig.
    #3 Disable the Linksys Wireless Network monitor.
    Restart the computer as need be.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Linksys Wireless network Monitor vs Windows Zero Configuration Utility

    I am unable to conect to the WRT54G v5 router using the Linksys Wireless network Monitor however, when I disable it and use the Windows Zero Configuration The computer immediately connects.
    What is going on?
    Chuck

    Sounds like you are not putting it the correct settings for for the Linksys Monitor.  Just use Windows, it works better anyway.

  • Wireless network monitor says I'm not connected to internet, but I am?

    Hi,
         I have a WRT54G v6 and a WUSB54GC. I can connect to the inter just fine and for the most part the linksys  wireless network monitor says I'm connected to the access point and internet. The problem is occasionally it will says that I'm connected to the access point but the internet when I really am and I can browse the web just fine. I get the not connected to internet msg for a few minutes then it just goes back to connected. Any ideas?

    Hi...
    I think here the issue may be that the utility and the internet connection are not getting synchronised. The operating system on your computer is it win XP? If it is win xp, u can use the windows wireless software to manage to your wireless network. In order to use the windows wireless zero configuration, right click on the linksys icon at the bottom right hand corner of the task bar, select the option that says "use windows wireless ....".
    The linksys icon will be grayed and windows will be managing the wireless network. Connect to your wireless network and you should be able to go online.

  • Wireless Network monitor cause holes in Desktop

    On my computer I have dancers that periodically dance on my desktop. It is live action video as opposed to animated cartoons.
    When the Wireless Network monitor is running it cuts a hole in the center of the screen rendering any animated object/person transparent right where the square whole is. BAsically its seems to be cutting a whole through what I guess is a DirectX overlay. Its definately the Wireless monitor as this does not happen when it is NOT running. Anyone else run into this and is there a solution? Ifact it cuts a whole into everything for a moment. I just opened Nero and the square hole was visibly retaining image data of the previous window for just a moment. its just that its easily seen when the screen needs to redraw
    WinXP Pro SP2(I dont dare use SP3 as that will render some of my fav stuff useless).
    Asus  A7V8X-X rev 1.xx
    Athlon XP 2600+ 1.9GHz
    Nvidia GeForce FX 5200
    PCI Bus
    Award Bios v6.0
    mem:2048

    You can install the adapter without the wireless network monitor. Try these steps Uninstall the drivers for the Adapter from start >> All programs ....
    >> Insert the Setup CD in the cd drive>> Click on Exit when the
    Linksys welcome screen appears>>Click on start. Unplug & replug adapter ...>> There should be a "" Found New Hardware Wizard ""
    that pops up on your screen>> Click on “Install software
    automatically “, and then click on next. Once the installation is
    complete>> Right click on the wireless network connection icon in the
    system tray besides the clock >>Click on view wireless networks and
    then connect to your network name.

  • How to connect 2 apple TV to the same wireless network?

    Hi,
    Can somebody please help me shed some light here on how to connect 2 ATV to the same wireless network? My first ATV connected to the network just fine and syncing with my itunes, however the 2nd ATV keeps getting problem connecting to the network everytime I tried to connect to the network. It detected my home network on Linksys router just fine, but it wont connect to it.
    Hope someone can help me out here... Thanks peeps...

    Hm ive make sure all the password and everything is correct and yet it wont connect. Keeps getting the problems connecting to the network, please check your setttings.

  • Problem connecting MBP to established Linksys wireless network

    just got MBP 2.16 (my first mac!). Having trouble connecting to my established linksys wireless network. I have the BEFW11S4 (V.2) etherfast wireless access point + cable router with 4 port switch. Currently have 128 encryption enabled. The linksys router is broadcasting its ID (I can see "linksys" on my mac) but it seems to not accept the password. I tried entering the 26 WEP key, the passphrase, the WEP key in quotes, the WEP after a $ sign... all to no avail. please APPLE community, help out a mac noobie before i have to turn back to Bill Gates....
    Dell Dimension 8200, MBP 2.16   Mac OS X (10.4.6)   2 GB SDRAM

    To find the IP address or the status, go to system Preferences then network. It will show you the status of any internet connections. You should see one for Airport, it will either show a green light and say 'Airport is connected to the internet' (or something like that) or a red light and say 'Airport is is active but not connected' (something like that). If you double click on Airport or click 'Configure' you will see tabs, click on TCP/IP and it will show all of your details including your IP address.
    As for the other, it always refers to wireless networks as 'Airport' and that response is the standard response from a Mac.
    the password should be typed in the hex section, not sure about the $ sign. I've never had to do that before. But if you can't connect even with no encription then I would think it is another problem. I would turn off the encription until you can at least get connected and then you can worry about the security afterwards.

  • HT4437 I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

    I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

    Welcome to the Apple Community Willy.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • Wireless Network Monitoring System

    Hi friends,
    I am planning to implement a Wireless network monitoring system as my final year project.
    In this project I need to control calls from one mobile to another with the help of JCC or some other technique. Mobiles will be connected to Pc in the following pattern:
    Mobile to radio transceiver which will further be connected to pc using RS232 serial port.
    This way i will 3 mobiles connected in the similar manner as above.
    I just want to know how i can control my calls from these mobiles??
    Please guide me, as in how should i start??
    Regards
    Ron

    Have you ever experienced any cross browser issues, when you
    really build an app for critical app like this?
    not really ... the only crazy thing i have seen is how each
    browser uses memory..
    you will see higher usage from IE than.. firefox...
    IE also has an issue with cache.. so you have to reset your
    page at every visit...( i cut that short thinking you understand
    what i am talking about)
    your biggest issue is the engine and processing of data..
    thinks like that.. how you put that together will be HUGE..

  • Win7 Home Premium - systray Wireless network connection icon?

    Hi,
    My home wireless connection is running fine and I do not have my Ethernet cable plugged in.
    In the systray part of the taskbar, there used to show a Wireless network connection icon - a little graphic icon that looked like 5 vertical bars side-by-side, with bars increasing in height, left to right.  That icon is no longer in the systray and
    it appears to have been replaced by the "wired" icon - a little square with a tiny picture of a plugger on its left side.  And since I don't have my Ethernet cable plugged in, there's a little red "x" on the wired icon.  I don't
    know what I did to cause the wired icon to replace the Wireless network connection icon in the systray. Any idea how I screwed this up and how to put things back again?

    Hi cwr64,
    It might be caused by netsh command using. Please try following methods
    Method1: Uninstall all “6to4 Afapter” and “isatap” device in device manager.
    Right click this computer->Properties->Device manager->View->show hidden devices
    Right click and uninstall all “6TO4 Adapter” and “isatap” devices in
    Network adapters.
    Method 2
    Please try to uninstall all your network adapter driver and reinstall them again. Then restart your computer check if the icon comes back. It might be caused by netsh command using.
    Note: backup or download your adapter driver before removing the drivers from device manager.
    Regards

  • How do I share files between computers (mac's) on the same wireless network?

    How do I share files between computers (mac's) on the same wireless network?

    Turn on File Sharing in System Preferences - Sharing, then you should be able to see them in the other Macs' Finder sidebars (under Shared). Click on them, click Connect As, and log in with the user credentials you're sharing from.
    Matt

  • Is there a way to play on the same wireless network with 2 different xbox 360 accounts?

    Is there a way to play on the same wireless network with 2 different xbox 360 accounts?

    Not sure what your question has to do in respect to Apple networking, but if you're asking can you use your Xbox 360 on a wireless network (regardless of the router's manufacturer) to access different Xbox Live! accounts, then the answer is yes.

  • I just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
    Your best bet may be to just reset the router and set it up again.
    Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2.

  • I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page- can't move to the main page – any idea on what and how, please?

    Hello, I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page… can’t move to the main page – any idea on what and how, please?

    Welcome to the Apple Community.
    Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
    Firstly, are you receiving any date and time errors when you turn on your Apple TV?
    Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
    If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

  • Can't find the iBahn wireless network here at the Anaheim Marriott.

    I'm using the iBahn wireless network offered by the Marriott for my laptop, but my iPad2 will not even pick up the signal. It is a pay connection, will this cause the ipad to not even recognize the signal? How do I get that changed so that I can actually use the ipad?

    How did you have to sign up for the network on your laptop? It could be a hidden network thus not broadcasting its SSID and you will not see it. To connect to a hidden network you use the join other option and the the SSID, security type and password.

Maybe you are looking for