Where is the list of mac models that 10.6 is compatible with?

Hi,
About 6 months ago I found a list on Apple's support site that listed which iMac models were compatible with 10.6. Could someone please point me to it?
At the time I was dismayed to find that my early 2008 24" 2.8 Ghz Intel core 2 Duo iMac was a gaping ommission in a list of iMacs both older and newer than it. Also I could have sworn I read a few accounts of people NOT being able to upgrade that particular model. Now, I can no longer find the posts or links... Maybe I was on crack or I have misremembered some search detail. Anyway, any help greatly appreciated!!
Thanks!

I believe it is this early 2008 version
http://support.apple.com/kb/SP485
although the one above lists 6mb of L2 cache, whereas my system profiler says mine is 4Mb of L2 cache.
Strangely the 2007 model (http://support.apple.com/kb/SP16) lists a 24" with 4 gb L2 Cache but the processor speed is 2.4 Ghz. So maybe my computer is some edge-case model?
system profiler yields:
Model Name:          iMac
Model Identifier:          iMac7,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          4 GB
Bus Speed:          800 MHz

Similar Messages

If I want to do that in windows, open multiple windows firefox, they show up in the taskbar, where is the equivalent on Mac?

if I want to do that in windows and firefox: open multiple windows i mac, they show up in the taskbar, where is the ekvivalent in mac?

Switch 101: On Windows, I used to…
<http://support.apple.com/kb/HT2514>
Mac 101: The Dock
("The Dock […] holds windows in their minimized state.")
<http://support.apple.com/kb/HT2474>
Want Mac? Forget Windows. Talk Mac, walk Mac, do Mac. Read
<http://www.apple.com/support/mac101/work/>

Around the web where are there lists of mac magazines?...

Around the web where are there lists of mac magazines?... besides macworld and macaddict.

http://www.macmagazines.co.uk/
http://www.magazine-group.co.uk/magazine/computers-technology/apple-mac
http://www.icreatemagazine.com/
Try google. Unless you live in China .There is much more on the web.

From where does exachk reads the list of stoage nodes that should be checked ?

exachk automatic tries to check a storage node thats closed. From where does exachk reads the list of stoage nodes that should be checked ?

Great! you found it and thanks for sharing the location.
Did you find it thought script or Google?

Where is the List of approved iTunes applicatiions

Where is the list of Apple approved iTunes applications? There are many thousands but no list to conveniently download and browse or query. The browsing tools on iPhones, iPads, and my Mac's iTunes only show a few apps at a time and usually resets the search back to the beginning of each category after trying to view and go back to the list results.
The iPad Application is better than the one on the iPhone but usually breaks after a few hundred apps are displayed. It seems worse if you actually view an app. Sometimes I can return to where I left the list but most times it resets to page one application one. Surely the list of applications is not a secret? Or is it? The search tools miss apps that I know would be found in most search engines and sometimes I have to type in an exact name and there it is? Am I doing something wrong and are there some posts on this that I haven't found?

The iTunes App Store is the official Apple provided access portal for finding, purchasing and downloading apps/applications for iPhones, iPads, and other IOS devices. Apple only approves of apps for users which are provided by iTunes via the App Store.
Yes I meant the the "App store" where browsing, what many would call a search/query tool does not provide a way to see the entire list of either iPad/iPhone/iTouch applications. I have been using lists for many years with millions of entries and the way we access the lists of apps, only a very small number are ever shown in searches. Sometimes I only find an app through a search by typing in the exact name? This seems how Apple intends users choices to be influenced. If your type of app doesn't float on the top of the pool, it is pushed to the bottom so as to be out of the way. So I am looking for a list to be able to quickly search them on my own and put them into categories that make sense to my work flow.
Thanks for your reply.

How do I get rid of the list of web sites that I visited. I was unable to follow instructions in the help section.

'''bold text'''When I click the little down arrow at the end of the address line, I get a long list of sites I visted. How do I get rid of them.
I went to help, but i could not make heads or tails of what I was supposed to do. The instructions were confusing.

Entries in the location bar drop down list with a yellow (blue on Mac) star at the right end are bookmarks. 
You can remove such a bookmarked item that shows in the list if you open that url in a tab and click the yellow star in the location bar. 
This will open the "Edit This Bookmark" dialog and you can click the Remove button to remove the bookmark if you want to remove such a bookmarked entry. 
See also:
* https://support.mozilla.com/kb/Clearing+Location+bar+history
* https://support.mozilla.com/kb/Cannot+clear+Location+bar+history

Library filters: can I add to the list of metadata fields that I can search by?

Is it possible to add to the list of metadata fields that lightroom can search for images by?
I know about the 'Any searchable ... ' but that does now allow me to search for specific conditions -
I am using some of the IPTC fields as a way to classify images of mine for various purposes and would like to
do something like search for images where the iptc source field has a certain value while the instructions
fields has some other value. I do not think this is possible using the available tools.
So, I'd like to be able to add these fields to the menu of possible fields in Smart collections
of the library metadata filter.
So, am I missing something obvious? Can this be done?
Cheers,
Bonny

Hi Rob,
Thanks for this plug in - it's really great.
The fields I'm looking for are part of the IPTC fields, and since I'm entering them in LR, they're not part of the image,
and I assume not something that exiftool can find in the image. So unfortunately I do not think I can use this plugin
for the actual purpose I'm intending.
I'll shed some light on what I'm doing and therefore what I'm looking for:
I have a collection of images (of people) that I need to match names to.
I use some IPTC fields (that are otherwise useless for me) to store this data.
These fields are the "Job Identifier", "Instructions", "Creditline" and "Source" in the IPTC tagset.
At some point I then want to look for errors in the data entry, etc and so I need to search for various
values of those fields for validation purposes mainly.
I created a tagset using Jeffrey's plugin and it allows me to view and use only the info I'm after, but no searching.
Your plugin provides more complete functionality (tagset creation as well as the searchability). The only question
is how do I go about using your plugin to use the fields I'm using?
Cheers,
Bonny

HT5628 Does it work with a macbook (aluminium) 2008 late, even if it isn't said in the desription? Windows 7 also did run, but wasn't in the list of working models for windows 7...

Does it work with a macbook (aluminium) 2008 late, even if it isn't said in the desription? Windows 7 also did run, but wasn't in the list of working models for windows 7 either...

JK90, I have boot camp on my Mountain Lion late-2008 unibody running 64 bit Windows 8, with a brand new ssd and 8gigs of ram. Although my scenario is officially unsupported, it works great. My 4+ yr old mac is the best PC I've ever owned :-)
There are a number of complications during and after installation, and you need to do a lot of research to make sure you get it right. I worked long and hard to get everything running just right.
Even after Windows was installed I had even more trouble with my drivers, and getting especially getting the trackpad to work properly, so I needed to use a regular mouse until I could get the trackpad on.
Also check out trackpad++, I've been using it for years now, it upgrades the trackpad drivers from apple and makes using Windows much nicer.

Hi. Does anyone know how to delete my guest network from the list of network choices that everyone in the neighborhood sees when picking a network? Followed helpful suggestions on this site to delete the netwk but it still appears. Appreciate any help!

Hi. I'm trying to make my guest network disappear from the list of network choices that appears to everyone in the neighborhood. Even though I followed the great suggestions on how to delete the network, it's still appearing in the list that everyone sees. It has my name and would prefer to get rid of it.
Please help! Many thanks!

Thank you for not only the tip but also especially the research showing that for anybody other that those using Wi-Fi for the first time the network wouldn't disappear. I wanted it to disappear for everyone so.....I finally solved it by resetting the Airport Extreme to the factory settings and starting over from scratch! It worked! Yay!!!!!
So, for everyone that has had this problem (and I've read many of the same complaints in different places on the Internet), you must go into Airport Utility and check the box stating that you want to reset it to the factory settings. Do not do it with a paper clip and the reset button on the box; I tried that first and it did not work. You must reset it via the Airport Utility. Then just start over and you will have the choice to NOT check the box to Enable Guests. If you want to enable guests, just be sure not to use your name or you're back to the same problem. Apple is so great with everything...wouldn't it have been so easy for them to just put this in the manual somewhere????? Thanks for all your help. Hope this helps others!

I am running mac osx 10.5.8, but FireFox is giving me a message that it is not compatible with my version of osx and will not let me install. The web site says it is compatible with osx 10.5. Am I missing something?

I was able to download the current version of FireFox but when I tried to install, I got a message that FireFox is not compatible with my current os. What else should I consider or try doing to get FireFox to work?

Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''and''''' OSX 10.5 or higher.
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
'''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

What is the list of file prefixes that make a file appear first in the finder?

Hi!
I was just curious :
What is the list of file prefixes that make a file appear first in the finder?
For example, files and folders whose names start with "A" will appear before files whose names start with "B",
but what about a list of characters for files and folders before the letter "A"?
I'm doing some file organisation, and I need certain things to appear at the top of the list.
I have noticed that the character-prefixes "0" and "(" seem to make things appear before "A"
I would like a complete list if there is one available.
Thank you!

Pretty much any number or a space character. Punctuation does too, in theory, but I'd advise to limit it to hyphens and underscores. Periods are OK in the middle of file names but you won't be able to start a file name with one at the Finder level since that would actually hide the file.
Matt

Where are the emoticons in Mac Mail?

Where are the emoticons in Mac Mail 5.2 on OS 10.7.3?

I used colon parentheses with the smiley emoticon which is the normal code for a smiley. It works on this forum. I used to type these in all the time on Eudora so I'm familiar with the different combinations.
I added a space after it in the system preferences/language popup and sent myself another letter with it included and it still doesn't work in Mac mail (I added a space before and after it in MacMail). but it does work in TextEdit now.
Yes, "use symbol and text substution" is clicked.
The checkbox is ticked in the replace box; in the next box is the colon/parentheses with a space, and then the smiley in the next box.
Thanks for trying to help.

Does anyone know the list of microprocessors that can be used with SDK?

I want to make a vision application that uses a usb camera from a custom board wiht a 32 bit microporcessor.

f4,
You can "use the LabVIEW Microprocessor SDK to port LabVIEW to any 32-bit microprocessor" (to quote from the first sentence of the Microprocessor SDK help file). There's good and bad news with this LabVIEW module though. Good news - if you have the module, you can integrate just about any toolchain (3rd party compiler) into LabVIEW. Bad news - the module doesn't work with anything out of the box. This is one of the reasons that if you don't have the module already, you might find it very hard to purchase it from NI now. It can be a bit cumbersome to setup.
If you call NI now asking to target any 32-bit microcontroller, we're going to encourage you to use the LabVIEW for ARM module or the LabVIEW C Generator. If your chipset is supported by the LabVIEW for ARM module, I would recommend that you go this route. A list of supported chipsets is here (as chipsets compatible with LabVIEW for ARM need to support the "RL-ARM Real-Time Library").
Kevin S.
Applications Engineer
National Instruments

I made a project on my PC computer, saving it as a tif. I then took it to the Art Institute, editing it on their Apple I wish to tweak it at home but now Ps claims that it is not compatible with this cc version of Ps, where it was originally created! HEL

I made a project on my PC computer, saving it as a tif. I then took it to the Art Institute, editing it on their Apple I wish to tweak it at home but now Ps claims that it is not compatible with this cc version of Ps, where it was originally created! HELP!!!

The files are the same, regardless of OS version.
Most likely your file was corrupted when you transferred it.

Where's the conversation in mac mail?

Where's the conversation in mac mail? Like in Gmail. Mac Mail in conversation mode only shows one side of the 'conversation'. You have to go to the sent folder to the see the other side. Anyone know of way to change the view? Sparrow mail even has both sides of the conversation in the in box. Surprised mail is lacking this.

Go to Preferences > Viewing and check "Include Related Messages". Mail randomly turned this off for me recently and I had to find it and turn back on.

Where is the list of mac models that 10.6 is compatible with?

Similar Messages

Maybe you are looking for