Where is the log file for sutdio workspace?

Hi, All,
I test a process in studio 10GR3, and there is an error as I start the process in the workspace. it said: "check the workspace log fiie for the detail error info...", but I cannot find the workspace log file. I'm appreciated your help and idea. Thanks in advance.
Best Regards,
Bill

the Studio logs will be present under <studio home>/log

Similar Messages

  • Where can I find the LOG file for bash/command history typed into Terminal?

    Where can I find the LOG file for bash/command history typed into Terminal?
    For 2 weeks ago I was searching for a log file on my server. Somehow I opend a file where I could see a list of all bash-commands I had ever entered into OSX Terminal.
    Now I need this file.. but cant find it.
    What is the official location for this LOG file?
    Thank you so much for helping.

    cat .bash_history

  • (Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

    Hi All,
    I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054"  when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out 
    The log file stated that there were ongoing connections of HRC with the CCX  (I am sure there isn't any active login to HRC)
    || When you tried to login the following error was being displayed because the maximum number of connections were reached for the server .  We can see that a total number of 5 connections have been configured . ||
    1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
    || Below we can see all 5 connections being used up . ||
    2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
    || Once the maximum number of connection was reached it threw an error . ||
    3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
    4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
    Current exact UCCX Version 9.0.2.11001-24
    Current CUCM Version 8.6.2.23900-10
    Business impact  Not Critical
    Exact error message  All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
    What is the OS version of the PC you are running  and is it physical machine or virtual machine that is running the HRC client ..
    OS Version Windows 7 Home Premium  64 bit and it’s a physical machine.
    . The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
    I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ? 

    We have had this "PRX5" problem with Exchange 2013 since the RTM version.  We recently applied CU3, and it did not correct the problem.  We have seen this problem on every Exchange 2013 we manage.  They are all installations where all roles
    are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
    We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth.  None of those "solutions" made any difference whatsoever.  The occurrence of the temporary error PRX5 seems totally random. 
    About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
    Most people don't ever notice the issue because remote mail servers retry the connection later.  However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
    simply fail.  Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
    Is Microsoft totally oblivious to this problem?
    PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
    JSB

  • History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

    Hi all
    I've got a error msg when try to generate a report using Cisco history report tool:
    Error | An Exceptional Error occurred. Application exiting.  Check the log file for error 5022
    It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
    User tried samething on other PC, it working fine.
    only on user' own PC and only choose this report, error appears.
    user runing windows 7 and do not have crystal report installed
    tried reinstalled the software, doesn't work.
    also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
    then tried https://supportforums.cisco.com/docs/DOC-6209  - doesn't work
    attached the log file.
    thanks.

    wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian 
    I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
    this matter only happens on this PC, when user try same thing on other PC, it works.
    so i think it not relate to server or account.

  • Where are the backup files for my iPad located on my macbook pro with maverick ?

    where are the backup files for my iPad located on my macbook pro with maverick ?

    As an addendum, if I need to, and hopefully won't, unless I switch computers, how can I revert from a copy of a different backup?  Thanks. :-)

  • Where is the data file for the address book located, I need to restore mine from backup but don't know where it is.

    Where is the data file for the address book located, I need to restore mine from backup but don't know where it is to do so.  Putting my Mac Pro onto icloud synching contacts resulted in duplicate and triplicates of the same cards.  I have a few THOUSAND contacts and the last time this happened was on mobile me.  that had a function where you could replace info on the mobile me server with info on the computer.  I see no way to do that on the new cloud.

    In the stupidly hidden user's Library->/Application Support/AddressBook/ labeled as AddressBook-v22.abcddb
    For TM restores, see Pondini's TM FAQs for starters, since I don't use TM.

  • Internal Error has occurred. Check the log file for details.

    Hello Experts,
    After installing Oracle 11g R2 in Windows XP (32-bit), I get the following error message when logging into https://localhost:1158/em - "Internal Error has occurred. Check the log file for details." I have extracted the following files onto one directory and used it for installation: win32_11gR2_database_1of2.zip, win32_11gR2_database_2of2.zip, p10098816_112020_WINNT_1of6, p10098816_112020_WINNT_2of6, p10404530_112030_WINNT_1of6, p10404530_112030_WINNT_2of6. I get no errors during the install. I selected "Create and configure a database". I selected "Desktop Class". I took the default locations (in step 5). Can someone please assist me?
    Thank you.

    internal error occur with some java exception?. some tabs are accessed like administration and when you click on performance than you are get logout??
    this is the problem which you are facing??>

  • Error: License File Exception (check the log file for details): ENT_PE_NODE not found in datastore

    Hi;
    i have install 2 MCS 7816 (publisher and suscriber) with call manager version 6.1, i have load the files licenses for the publisher and the phones, but when i load the file license for the suscriber in publisher server i had the error messeage :
    Error : License File Exception (check the log file for details): ENT_PE_NODE not found in datastore
    what s the solution.
    Thanks for your help

    Hello,
    I seen this issue before, all you have to do is Contact Cisco Licensing team. In order to generate new licenses for your server.
    Thanks,

  • The log file for database 'tempdb' is full

    Hi Experts,
    in my sync RFC to JDBC scenario I get the following error message which says:
    11.02.2009 11:23:20 Error Unable to execute statement for table or stored procedure.
    'Trns' (Structure 'XYZ')
    due to java.sql.SQLException:
    [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]
    The log file for database 'tempdb' is full. Back up the transaction
    log for the database to free up some log space.
    11.02.2009 11:23:20 Error JDBC message processing failed;
    reason Error processing request in sax parser: Error when executing
    statement for table/stored proc. 'Trns' (structure 'XYZ'):
    java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]
    The log file for database 'tempdb' is full. Back up the transaction log
    for the database to free up some log space.
    see here:
    http://img23.imageshack.us/img23/6541/unbenannthd9.jpg
    does anyone know how to solve this problem?
    thanks
    chris

    Christian,
    See this page for more information on the error you're getting: http://sqlserver2000.databases.aspfaq.com/why-is-tempdb-full-and-how-can-i-prevent-this-from-happening.html.
    Kind regards,
    Koen

  • Where is the default file for SVG filters in Illustrator CC?

    Where is the default file for SVG filters in Illustrator CC?

    User \ Library \ Application Support \ Adobe \ en_EN \ Adobe SVG Filter.svg
    it's:
    User \ Library \ Application Support \ Adobe \ Adobe Illustrator 17 \ en_EN \ Adobe SVG Filter.svg
    Note that youneed to unhide the Library folder on Mac OS X Tiger and up

  • Where are the sample files for dreamweaver cs 5.5 on Adobe TV?

    where are the sample files for Dreamweaver cs 5.5 on Adobe TV? video says there there, but there not! Video even shows where to find them, but there still not there! Were they just to big for Adobes servers to handle so the had to take them down to make space?  : )  Please help, could really use them. Thanks! : )

    CS5.5 is now 4 versions behind CS6, CC and CC2014.
    This tutorial was written for CS5 and it works with CS5.5. You'll find the supporting files for it under Sample Files on the right.
    Building your first dynamic website – Part 1: Setting up the site and database | Adobe Developer Connection
    Nancy O.

  • Internal Error has occurred .  Check the log file for details 11g r2 on windows 8 64bit

    Hi Friends,
    I Have just installed on my laptop
    Database : oracle 11g 64bit , on windows 8 64bit
    I was successfully able to install the Database without any problem... I am able to connect from command prompt both as sys and hr user....
    But when I tried to connect through EM by sys credentials...
    https//localhost:1521/em
    I am getting Error Internal Error has occurred .  Check the log file for details....
    When I checked the emoms.trc this the last few lines...
    https://localhost:3938/emd/main:A००००००००३३.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 32 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:22:35,544 [MetadataLoad https://localhost:3938/emd/main:A००००००००३४.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 33 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:22:36,275 [MetadataLoad https://localhost:3938/emd/main:A००००००००३५.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 34 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:22:57,105 [MetadataLoad https://localhost:3938/emd/main:A००००००००३६.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 35 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:22:57,832 [MetadataLoad https://localhost:3938/emd/main:A००००००००३७.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 36 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:22:58,625 [MetadataLoad https://localhost:3938/emd/main:A००००००००३८.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 37 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:23:02,529 [MetadataLoad https://localhost:3938/emd/main:A००००००००३९.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 38 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:23:03,307 [MetadataLoad https://localhost:3938/emd/main:A००००००००४०.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 39 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    2013-09-02 22:23:04,107 [MetadataLoad https://localhost:3938/emd/main:A००००००००४१.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 40 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
    ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
    ORA-06512: at line 1
    Thanks and Regards

    You could try reading what I said: change the port in the URL to 1158.
    My release of windows is this,
    c:\Users\John>ver
    Microsoft Windows [Version 6.2.9200]
    c:\Users\John>
    You can ignore that junk about editions.
    And by the way, there is a problem with your keyboard, it keeps inserting multiple "...." character strings.

  • Where is the plist file for the Finder option "Always Show Extensions"?

    Where is the plist file for the Finder option "Always Show Extensions"?
    I am designing a new master NetRestore image for Leopard. I have all my Dock and FInder prefs tweaked and customized on the image. (They all live in /System?Library/User Template/English.lproj/Library/Preferences...)
    The one preference I cant get to stick is the option to "Always SHow Extensions" It appears to not be located in the usual com.apple.finder
    Can you tell me where this preference lives?

    user/library/Preferences/com.apple.AddressBook.plist
    Hold down the Option key when selecting "Go" in the Finder's menu to see your Library folder.

  • Where is the log file in 10.1.3 AS?

    Hi
    I am writing System.out.println statements and want to check those messages in the log file. But not sure where the log file is. Appreciate if you can respond.

    By default all OC4J stderr and stdout messages go in following file:
    $ORACLE_HOME/opmn/logs/OC4J~home~default_group~1
    If you want you can change it, refer following for that:
    http://download.oracle.com/docs/cd/B32110_01/web.1013/b28950/sysprops.htm#CHDDCCJI
    Thanks
    Shail

  • Where is the Log file Location ?

    Hi,
    JDeveloper : 11.1.1.6
    I need to find the log file (text file) that is shown in console window.
    where is it located exactly ?!
    Thanks

    Thanks for the reply,
    Actually my problem is "Farsi Language" (RTL) :
    when I print the data retrieved from DB into Log file, it's not readable ! eg : ???????
    first I Had the Idea that JDeveloper's Log viewer is not able to show Farsi characters and I wanted to view it in another text editor.
    but now I have the same problem in other text editors as well.
    I think the encoding in which the log is written needs to be changed into say : UTF8
    So , where can I change that encoding ?!
    Thank you very much

Maybe you are looking for