Where is the main dictionary of FM stored?

This seems like a very basic issue but I could not find any infos about it. I assume the main dictionary is stored as a language-specific file at some location. I would like to remove unneeded terms; I don't know about other languages but the German dictionary contains some very outdated words as well as verbosity unrelated to our industry sector.
I have checked the folder \users\username\AppData\Roaming\Adobe\Linguistics but this is empty.
Robert

Which version of FM? The location has been moved around a bit. Also, it (version) depends upon whether the Hunspell or Franklin-Proximity dictionaries are used. The Franklin-Proximity are binary encoded, so you couldn't modify them anyway.
For the Hunspell, there are at least three versions for German, so first check if you are using the most modern one (2006 vs 1996 vs 1901). The Hunspell dictionaries are text files, so these can be edited.
The dictionaries are located in the \fminit\Linguistics folder of your FM installation.
Note: any errors (corruption) in the Linguistics files will cause FM to crash on startup. Make certain that you have the original files backed up if you do try to make any changes.

Similar Messages

  • When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.

    When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.

    Have you ever created a user dictionary? You have to manually create one, AppleWorks won't do for you. The user dictionary & any other dictionaries belong in the AppleWorks Essentials folder which belongs in the AppleWorks 6 folder in Applications.
    Deleting & reinstalling AppleWorks from the original disk will not delete your files unless you have saved them in the application folder. The Mac OS creates a separate Documents folder for your files & that is where the documents you created should be.
    Unless all of your documents are AppleWorks 6 word processing documents, Pages alone is not sufficient. The iWork applications - Keynote, Pages & Numbers - can only open AppleWorks 6 presentation, word processing & spreadsheet documents, respectively. They will not open any other type of AppleWorks 6 files or any AppleWorks 5 or any version of ClarisWorks files.

  • Where is the item category usage data stored?

    Where is the item category usage data stored?
    I'm checking the CRM system of my customer. My customer uses CRM & ERP system. Both BP data and prodact data are connecting from ERP to CRM. In Item category determination on CRM system, Item category usage exists as a condition. I know where I customize the usage setting. However,I don't know where ithem category usage data is stored. Product master data? or BP master data?  Does anyone have this information?
    BestRegards
    Miki

    If you are refering to  Item category group, then this is stored o product master data on sales organizational specific data.
    If you are refering to  Item category usage then there is a different logic. Item category usage is is mainly hardcoded in ABAP programs. For example one logic is hardcoded for interchengabilty scenaro. In some cases you can even use badi implementation.
    Regards.

  • Where does the Value of EECST gets stored

    Hi,
    Where does the value of EECST gets stored for the infotype p0167. How can it be retrieved from that specific infotype. - Urgent issue.
    Thanks........
    sk

    hi,
    what is EECST?
    there is no such field in data dictionary.
    plz specify properly or atleast u give the name of field in general that is used in pa0167 infotype so that we can help u.

  • Table name where all the SAP Script names are stored

    Hi Gurus,
                   Can i know the table name where all the SAP Script names are stored in SAP Database.
                   Thanks in advance,
                    Shyam.

    Yes TNAPR is the table which contains sapscipts name and print program names.
    Step:1: Goto to the Table TNAPR using SE11
    Step:2: Get the Contents of the Table(CNTRLSHIFTF10)
    Step:3: On the Table Content Selection Screen, Type the driver program name in the field PGNAM and execute(F8).
    Step:4: FONAM field of the result display contains the SAPScript Name for our driver program.
    Regards,
    Lalit Mohan Gupta.

  • Where is the actual iPhoto photos data stored?

    I'm trying to find the data files for iPhoto in OS X Lion, data used to be in the user Library, but I can't find that either. Where is the actual iPhoto photos data stored?

    1. Set the preferences to edit in another program, Photoshop. (Advanced Tab)
    2. Drag the image to the email message (the problem you describe should be fixed in 10.8.3)
    3. Select all the images in the event or album and show the Info pane.
    4. You have to export them first in order to compress, so either drag them out of iPhoto into the destination or use the Export command.
    5. Clunky? Works pretty great for me.
    6. I can access all of my photos right there in iPhoto. I can access other people's photos there, too.
    If you don't want iPhoto to organize the files, tell it not to. Prefs, Advanced, Copy Items into the iPhoto Library.
    If you didn't want someone to comment on this,
    Seriously?  It is rediculous that we needed a forum to find our own files.
    Then why did you post it?
    Are you an Apple OS designer and are offended or something? Why are you even looking at this post if it's not an issue for you?
    Look up the thread a ways.

  • Where is the vendor description(short text) stored against LIFNR

    Hello,
    where is the vendor description(short text) stored against LIFNR ..
    Thanks..
    Shehryar

    Hi,
    Venodor Name is in the Table LFA1 and field is LFA1-NAME1.
    if it is Blank you can take the ADRNR from LFA1 and go to ADRC table with ADRNR and get the Name from ADRC table.
    Regards
    vijay

  • Where are the unsent Workflow E-mails stored?

    Hi All
    Where are the unsent Workflow E-mails stored?
    Regards
    Rahman

    just trying through this
    There r 2 path A and B
    and notifications are A1 A2 A3 And B1
    A A1 A2 A3
    B B1
    Notification A1to A3 are respond type and all the three performer can respond or reject.
    at the same time i've to send B1 notification to that performer which has not responded imeadtly after preavious responder which has responded.
    How can i trace that from tables
    Please it's urgent
    Thanks
    Bachan

  • Where are the results to my form stored?

    Where are the results to my form stored?

    Hi SBHAl ,
    The results are stored under responses in your account PFB Screen Shot.
    Thanks,
    Vikrantt Singh

  • Experts - where are the main settings for country currency settings

    Hi
    where are the main settings for different country currency settings.
    Ex:
    us,canada and europe customers us$, canada $, europe euro,
    How the pricing will effect for different country customers?
    Any one can help me on this.
    Any documents on thes please send to [email protected]
    Thanks
    Kris

    You can find this in the following path.
    SPRO->GENERAL SETTINGS> SET COUNTRIES>DEFINE COUNTRIES-->
    Here countries have an ISO CODE
    Then
    SPRO->GENERAL SETTINGS>CURRENCIES-->CHECK CURRENCY CODES
    Here ISO codes mapped to currencies.
    If CCode currency = Customer master currency, then transactions will happens in that currency
    If CCode currency<> Customer master currency, then the exchange rate will come into play to convert customer currency to company code currency.
    And anway if you want a different currency from the country currency, you can mention that in ccode configuration. The presence of currency in company code configuration is must and hence configuration at country level is not needed I think
    Hope this helps.
    Rewards pls
    Message was edited by:
            Navaneetha Krishnan

  • Where are the Pick/Unpick/Reject Flags stored?

    Hello all,
    On LR4.0 I went through the process of creating a new catalog and importing the 3.6 cat with the proverbial error at the end of the update and have been working with that cat in LR4.  I've added around 300 new images to that 4.0 cat and have done some Pick/Reject flagging as well as Star Ratings. 
    I've just moved to the LR4.1 RC1 and successfully upgraded my original LR3.6 catalog without any errors. Now I have added/synchronized my LR4.1 RC1 cat to add in place the folders of images I've added that have the Pick/Reject flags.  I see the Star Ratings but not any of the Pick/Reject flags on those folders.  I do see the flags on the images that were updated with the catalog though.
    Where are the Pick/Unpick/Reject Flags stored?  In the catalog only?  In the sidecar XMP file?  Both? Doing a Ctrl-S doesn't seem to make a difference.
    Thanks in advance for any feedback.
    Tony...

    Catalog only.

  • Where is the value of report repository stored in the database?

    Hi all,
    One of our developers is trying to write a code that would send the output report (pdf)of a process through mail, typical work flow stuff.But the problem is that we are not supposed to hard code the value of report repositiry from where the report has to be picked.can anybody suggest a table in the database from where the value of report repository can be queried.
    we tried using
    select reportrepositorypt from pswebprofile.
    but this doesnt return the correct path. we went to PIA->peopletools->webprofile ->webprofie configuration
    here we updated the value in report repository field and saved it and queried again.
    But this didnt solve our problem.
    Its showing the previous value which is different from the actual report repository path.
    all the servers are in solaris box.
    please suggets.
    Thanks!

    Right now, I am trying to send a PDF (XML Publisher report) as an email to our vendors (it is their ACH Advice).
    What I have done so far is: Created an App Engine, one step to populate a state record with run control information and the second step that runs XML Publisher and creates PDF report(s) which are published to the Report Repository and saved to a file on our network. Now I think I just need to create a third step to recall the PDF(s) and send the PDF(s) out as emails to our vendors.
    I have found that the PDF information from Report Repository is stored in the Database in the CDM_LIST_VW record (this is a view and the main underlying table is CDM_LIST, but this contains what I need for now, so I'm going to try using it first). The Report ID is stored in the CONTENTID field and the Report Description (description shown on the Report Repository -- which in our case contains the email address) is stored in the CONTENT_DESCR field. So I am going to try over the next week to write the logic to query the CDM_LIST_VW for the data needed for the email address and the ReportID to go and grab the file....The hardest part is finding the actual file but I am hoping that I can also find a URL on that table. I'd pull the file from the network, but XML Publisher writes them out into numbered folders where all the PDFs are named the XML Report Defn - thus same name). I have not tried any of this yet, but am hoping I'm on the right path.
    I hope this helped answer your question.
    Good Luck!
    Jennifer

  • In Authoring Enviroment where are the results of a leaner stored?

    In Authoring Enviroment when i go to change attribute value in test author and click "Result Storage"checkbox, i cannot fiind the place where are the test results been stored.
    Can anyone help me in this regard? please
    Abdul Qadir (SHMA)

    Hello,
    I am trying to figure out how to access the saved course and I am having trouble understanding the settings in the AE and locating the data in the provided tables as discussed.
    1: What is the correct setting in the "Results Storage" and what does each selection mean?
    2: Are there separate tables to be used if I am using AICC instead of SCROM? We are currently using AICC to allow multiple parts in the AE? (i.e. a PDF is the main data source and the user has to click the CONTUINE button to access the assessment)
    3: What table allows me to view the final assessment scores or the inputted answers for the course?
    Thank you for any help with these issues and any guidance will be greatly appreciated.
    Kind regards,
    Brandon Gabany

  • Where are the Processed Messages in XI stored?

    Hi,
    Can any one give me an idea of about
    <b>Where the Processed Messages in XI stored?</b>

    Hi NaveenKumar,
         Below links will tells about Message processing
       http://help.sap.com/saphelp_nw04/helpdata/en/c8/19891743b111d1896f0000e8322d00/frameset.htm..
    http://help.sap.com/saphelp_nw04/helpdata/en/ea/2f053d39177608e10000000a114084/frameset.htm.
    Hope these answer will helps you.
    Regd's
    Hari

  • Where is the password for user SDM stored in sap system?

    Hi SAP Gurus,
    We recently changed the password of the user j2ee_admin in our dual stack system where our UME is ABAP.
    Now, we have made changes in the su01 and configtool but after the system restart, the user id j2ee_admin is getting intermittently locked.
    On starting the the JSPM/SDM, we found it still uses the old password so wanted to know that from where does the user SDM picks up the password and starts.
    Searched few blogs and found that it reads from secstore of configtool. Could you please help.
    Regards,
    Himanshu

    Hi Himanshu,
    SDM uses encrypted administrator credentials stored which are stored secure store to use deploy service.
    If you have changed the password, updated in secure store and is correct, the you should be able to logon to VA.
    If not, then
    Goto /usr/sap/SID/DVEMBGSXX/SDM/program/config and open sdmrepository.sdc file to see the values of SecStore.properties and SecStore.Key are pointing to correct path. You can verify this from configtool or config.properties in configtool folder.
    If you are not able to save this password in configtool, then refer 1228507 - Config Tool does not properly save password in Secure Store
    Regards,
    Divyanshu

Maybe you are looking for