Where is the mic located on a 27 inch slim iMac?

I tried snapping my fingers in front of the screen, all around the bezel, and behind the case while watching the level meter in the Sound panel. It seems that no matter where I hold my hand the level is the same. I'm sure they didn't put multiple mics in there, probably just a very sensitive omni. But where?

Thanks for the info. Its so tiny it looked like a slight imperfection in the top edge of the case. Theres a similar mark on the back about an inch below the top edge, but it doesn't seem to be another microphone.
I'm wondering if theres a way to permanently disable this mic - it keeps turning itself back on.

Similar Messages

Where is the mic?

Where IS the Mic?

On most basic phones the mic is usually located at the bottom and could be on the bezel. It is a very tiny hole and I have seen it sometimes not look like a hole at all if it is filled with dirt. I am guessing that you are questioning where it is because people are stating that they can't hear you. I would locate the hole on the bezel and try to blow it out with canned air. If that doesn't work I have successfully (on countless occasions) cleared this opening by taking a single staple and straightening it. Once straight it is the perfect size to clear any dirt out. Be sure to blow it out afterwards.

Where are the updates located for Mac App Store app?

Hi,
where are the updates located for Mac App Store app? I don't think /Library/Updates is the only location. Because I'm now having 10+ of Apps reporting updates is needed, but only 1MB＋ files is located in /Library/Updates.
Please help!

If so just use the search bar in the top right to search for the update you are looking for.

I lost my ipod and I need to know where is the last location before its off.(its definded in icloud)

I lost my ipod and I need to know where is the last location before its off.(its definded in icloud)

Your welcome.
If you don't see it on the map now when you go to icloud.com and check Find My iPhone, if it is shown on the device list you can click on the device, then check the box next to "Notify me when found" (see image below) and you will receive an email when it goes back online, if ever. The email is sent to the email address associated with your iCloud ID.
There's nothing else you can do. I don't believe iCloud support can tell you it's last location either once it's cleared from the map.

Where is the magnet located in the track pad and display lid?

where is the magnet located in the track pad and display lid?
have to see if theres a problem with the display magnet because when i close the lid, the sleep function does not work.
am using a fridge magnet to move around the track pad to see if this will activate sleep mode. im begining to wonder if its worth just going with out the auto sleep mode and maybe try n get some money of what i paid for it (it was a refurb machine)

as a guess, around the middle of trackpad, maybe half an inch moving from the lead edge towards the screen
also, give it a few seconds to activate in any one spot - it's not instant

E66: Where are the themes located?

Hi all,
Want to delete a bunch of themes which I don't use, but cannot find them anywhere in one of the phone folders (memory & memory-card). Anybody knows how to get rid of them? There is no uninstall option either.
Many thanks!

Hello guys Im new here..
And I wanna ask if HOW TO DELETE CORRUPTED THEMES in my phone
I do have e66 phone .. And I already Download that Unsis (the one your talking about in this link >/t5/Eseries-and-Communicators/E66-Where-are-the-themes-located/m-p/468958#M41154 )
I still have PROBLEM .. Cause When I Downloaded the Themes I wanted i save it on my PHONE MEMORY .. now when i Click the OPEN SIS and Go to phone memory i cant Find the THEMES i Downloaded..
Here's Some Screen Shot
[IMG]http://i56.tinypic.com/2mwv7sj.jpg[/IMG]
[IMG]http://i54.tinypic.com/2eog0hs.jpg[/IMG]
[IMG]http://i55.tinypic.com/16rz8k.jpg[/IMG]
Kindly pleasee Help me
I'll wait for your reply ..
Mail me Puh~pleaaaase
Thanks
Raaaabit here ~

Where is the default location for the OC4J logs?

Where is the default location for the OC4J logs?

Depends on what variant of the product you are using.
In an Oracle Applicaiton Server environment (ie the one you install versus unzip) the stdout/stderr streams from OC4J are captured in the $ORACLE_HOME/opmn/logs/<group-instance> directory.
If you are using standalone then stdout goes to the console where you started the process.
The logs for the OC4J instance itself are located in $ORACLE_HOME/j2ee/home/log/<instance_group> directory. In this directory you'll see different logs for differet areas of the server. Most of the logs however are captured in the oc4j sub-directory in the log.xml file. Whenever you enable an OC4J component logger in the j2ee-logging.xml file or via ASControl, this is where the logs will end up.
Take a look at the $ORACLE_HOME/j2ee/home/config/j2ee-logging.xml file -- the log handlers will give you some idea on the different log files that are in use.
You can configure your application loggers to also direct their log into this file if you wish. See http://buttso.blogspot.com/2007/09/directing-log-messages-into-oc4j.html for an example.

Where is the watermark located in photoshop?

Where is the watermark located in photoshop cc?

in CS6 is here, might be same or similar in CC.

I have no DVD drive on my computer. Where are the downloads located?

I received discs for Photoshop elements & premier elements 12 with my new camera but my computer doesn't have a DVD drive. I assumed it would be no big deal to download them from the Internet...wrong. .I have serial numbers to install Photoshop but I cannot find where the downloads are located. I find plenty of "trial" downloads but I should not have to pay for a product I already have. Can anyone help me out there in cyber-land? Adobe has no information on the website and I am unable to locate a live person. So, that is you! Hey live person, can you help this little ol lady? Thank you so much!!

I am okay with a computer but not a geek that is for sure!
I downloaded the assistant and nothing happened. I went to the site you so kindly suggested and started the download, and when I tried to apply it to the computer it said elements were missing. I deleted the download and then started again. Right now it is once again downloading the assistant.
Arggggggh!
Sent: Wednesday, August 20, 2014 5:46 PM
To: Regi Reyno
I have no DVD drive on my computer. Where are the downloads located?
created by A.T. Romano in Premiere Elements - View the full discussion
ILoveMyBling
Thanks for the update.
What was the problem...the length of time for the download or just getting any download at all?
If necessary, I will go step by step with you through the tryout download from Adobe. But, the purchase of a USB external DVD/CD burner for your computer is a good idea and investment.
If you do the shopping for this, check out how many connections are necessary for it to the computer....none, one, or two...check out the length of the USB cable.
Please let us know how we can help. But, your mentioned place of purchase has a squad who should be able to help your with the purchase.
Thanks. Please update us on your progress when your schedule permits.
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6659618#6659618
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

When an iPad is connected to the MacBook And the option says it will make a full back of the iPad to the computer does that mean ALL the files associated with apps on the iPad? If so where is the backup located on the computer?

When an iPad is connected to the MacBook and the option in iTunes says it will make a full back of the iPad to the computer does that mean ALL the files associated with ALL apps on the iPad? If so where is the backup located on the computer?

Yes. http://support.apple.com/kb/ht4946

HT4061 I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.

I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.
Is there any way that I can find the last location that I left it,eventhough I called in lost and stolen and reactivated my # to a different device.

If you didn't set up Find My iPhone or it otherwise does not appear in icloud.com, then there's no way to trace it. Notify the police and your cell carrier, and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance).
Regards.

Where are the queries located on server side?

Hi All,
I need to copy some queries from production to Q system. The question is: is it possible to do it on the server side since I don't want to change the transport route; if so where are the reports located on the server side?
I appreciate any help,
Regards

hi,
prasad is right. if you want to transport frm one system to another system, you have to do it thru transport. and wht does it mean by, you do not want to change transport route.
regards,
Purvang

IPad mini 3 mic is quiet and where is the mic, please help....???

hello guys i bought my iPad mini 3 today. I'm trying to guess even where the mic is, I'm guessing its at the top on the back well it looks like a mic. but anyway i recently done a video of myself to test the mic on the iPad. and it seems quiet. don't know if I'm doing something wrong. i am currently installing IOS 8.1.2 now. can someone tell me if the mic is faulty, or if I'm doing something wrong. the volume is on full. please help........

Hi Townsend1990,
I'm sorry to hear you are having issues with your new iPad. If you are looking for more information on the locations of the dual mics on the iPad Mini 3, you may find the following page helpful. If you are having mic issues, especially if you have your iPad in a case, you may want to make sure that the mics aren't obstructed.
Apple - iPad mini 3 - Cameras (shows mic location about half way down)
Regards,
- Brenden

Where's the best location to place Wireless router

I have a two story house and want to know the best location to get the besp reception inside and outside the house

The best place is generally somewhere near the center of the area where you want wireless service. Ideally, the signal should pass through as few walls as possible, as it travels from the router to your wireless computers. Try to locate it away from other electronics (i.e. don't put it behind your monitor, near a 2.4 GHz telephone, or near a microwave.). If you have a primary desktop computer, there are some advantages to keeping it within eyesight, as this lets you quickly check the status of the router if there is a problem. Finding a good location is sometimes just a matter of trial and error, so don't hesitate to try out a few spots. If you find 2 locations that are equally satisfactory to you, then consider your neighbors, and locate it where it is least likely to bother them.

Where are the includes located in UCM

Trying to edit "workflow_docs_list.htm" and now I'm trying to find where the include "workflow_docs_table" is located in UCM. Anyone have a idea where I can find the include at?
Answered my own question so close this topic if possible.
Edited by: JTyson on Nov 27, 2012 3:13 PM

Sorry about that I asked because I have to request the needed file and need to know beforehand, for the answer what I did was I found the .htm file that built the page (for my problem it is "workflow_docs_list.html"), and found the include that is being called (the include was "workflow_docs_table"). Next I went to the workflow page I wanted to work on (workflow "XyZ" under Active Workflow) and added &IsPageDebug=1 to the end of the url (gotta make sure the URL is for that active workflow or it won't work).
Once the page loads there is a gray tab, click it and it will expand showing some options, click "iDocTrace" and expand the popup window and search for the include you want ("workflow_docs_table" for my case) and it will show the file location if it is being used.
I do have a new question if anyone whats to take a shot at it. I have a table of data that has a metadata tied to it, but if I try to access the metadata through iDoc I just get the id number tied to it, I wanna grab the name I gave it in the table. The reason is if someone was to remove/add a new item in the table we would have to make a lot of changes to difference areas with the idoc and was hoping to avoid using the current method of converting the number into it's name.
example
table x:
id=1; name=test
I get the id number instead of the name if I called the metadata tied to it via iDoc and was hoping to get name instead is this possible?
Solved: the function getViewValue was just what I needed, getViewValue("view", xTest, "viewColum")
Edited by: JTyson on Nov 28, 2012 10:24 AM
Edited by: JTyson on Nov 28, 2012 10:44 AM
Edited by: JTyson on Nov 28, 2012 11:11 AM

Where is the mic located on a 27 inch slim iMac?

Similar Messages

Maybe you are looking for