Where is the microphone (mouthpiece) on the LG Exalt?

Hi,
This may be a dumb question, but I can't find the microphone (mouthpiece) on my new LG Exalt. I'd like to know where it is so I don't put my finger over it. Thanks.
Zaffer

Yes, I checked the user manual -- the microphone/mouthpiece isn't listed or pictured. There is a tiny slot near the bottom on the back of the phone. Could this be it?

Similar Messages

Where is the built-in microphone on the iMac osx 10.7

where is the built-in microphone on the iMac osx 10.7

It is the tiny pinhole left of the camera lens above your screen.

Where is the built in Mic on my G5?

sorry to sound so stupid, but where is the built in microphone on my G5 located?
TIA everyone

Hi-
There are a couple of ways to get line in.
One, the versatile iMic. Still need a microphone.....
Use a self powered microphone like this DRK.
If you just need a mic for use with a webcam, get a USB webcam that has a mic built in. Plenty good....
Also the line in port, is it located at the back of the tower and presumably has a small 'mic' type icon located next to the port?
On the rear, yes. Mic icon, no.
The G5 tower has a rear mounted "optical digital audio in Toslink connector" and a "stereo audio in minijack".
This is where you would connect a preamp or amplifier, so that you could use standard microphones.
I use an iMic. Good for connecting my turntable, and for connecting a mic to add voiceover.......

Where is the format folder??

i have just bought the msi megastick 128 (version 2.04) and i use windows xp.
after installing the cd ,the windows found the msi and the i tried to format the msi.i searched for the msi folder (format) but i couldn`t find it.,so i format the msi with the windows xp using fat and not fat32(i rode the forum before i decided to buy it )
everything went well and i have now more than 30 songs of mp3 in my msi
i have three questions for all of you:
1-where is the format folder of the msi (i saw it on the anandtech review)?
2-how can i repeat between a to b(saw it on anandtech too)
3- is it possible to create a playlist and hear only the desired playlist??
thank you

Quote
Originally posted by akismei
i have just bought the msi megastick 128 (version 2.04) and i use windows xp.
after installing the cd ,the windows found the msi and the i tried to format the msi.i searched for the msi folder (format) but i couldn`t find it.,so i format the msi with the windows xp using fat and not fat32(i rode the forum before i decided to buy it )
everything went well and i have now more than 30 songs of mp3 in my msi
i have three questions for all of you:
1-where is the format folder of the msi (i saw it on the anandtech review)?
2-how can i repeat between a to b(saw it on anandtech too)
3- is it possible to create a playlist and hear only the desired playlist??
thank you
[list=1]
I don't understand your question. Please specify what you mean by "Format folder".
When playing a song, push Fn (near the microphone) to set point A, push Fn again to set B (repeating will start) and push Fn again to stop the A-B function.
No. Not yet, and I guess that there will never be (see the topic "Firmware request" or something).[/list=1]
Wlx.

Where are the headphone jacks on an Envy 700-056

where are the headphone jacks on an Envy 700-056?
This question was solved.
View Solution.

Microphone, headphone, and USB ports can be found on top of the computer facing to the rear.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP LaserJet Enterprise 500 551dn - where did the drivers go?

I go to the download page to download the drivers for this 551dn. I download all windows 7, 8, 8.1, 2008, 2012, so that i can put them on my print server. I downloaded them from here..
<http>//h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5081348&lang=en&lang=en&cc=lamerica_n...
when i get the file, lets say for windows 7/64bit, i choose...
HP LaserJet Enterprise 500 color M551 Printer Series PCL6 Print Driver (no Installer) 61.130.04.12834
24 Sep 2014 21.3
I get the file downloaded (LJEnt-color-M551-Drv-no-installer_12297.exe), i run it, get the security warning and Run. the file extracts - then POOF, the installer is gone.
where did the files go? They aren't on the root of the C: drive, a folder/files were not created on my desktop, no files or folder created in my downloads folder.
I was never asked for a file save location.... ??? really? is this this basic stuff?
Where are the files? this $$$ printer is a brick until i get drivers!
Thanks!
Jason
UPDATE- I FOUND THE FILES!!
First of all, HP... i'm not impressed.
All the files for all the drivers are in a series of temp folders...
C:\Users\-myusername-\AppData\Local\Temp\3\7zS4A73
really?
hope this helps someone.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

Sometimes I can't get out of Day view in iCal. There is no where on the screen to select month view, even when I close it out and go back into iCal.

Sometimes I am locked in "day" view in iCal. There is no where on the screen to choose "month" view, even when I close it out and open again. Tapping anywhere on the screen or scrolling doesn't help.

Give this a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try full screen again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Where did the Stream 7 drivers go?

The support page for downloading drivers for the HP Stream 7 tablet (any model) has disappeared from the HP website.
Navigating to the HP Stream 7 support page, Selecting "Software and Drivers", then "Go directly to software and drivers page", Operating System "Windows", then Version "Windows 8.1" (the only choices), then clicking the Update button, gives a message "No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product homepage. " This happens using Firefox, IE 11, or Chrome.
These drivers have been missing for at least a few weeks, and multiple forum users have also had no luck finding them. Before that time the drivers seemed to come and go randomly, but they've stayed missing now for weeks. One dorum user has posted direct FTP links to the drivers, and they might be the latest version, but not really sure.
Where did the drivers go, HP?

This is for the 5701 as of a few days ago.
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69307.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70275.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70340.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70339.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70337.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69308.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69305.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69309.exe

How do I figure where is the data in a materialized view coming from

Hi: when I run select NAME, OWNER from dba_mview_refresh_times, I see a number of materialized views. How do I find more details about this view i.e where is the data coming from and which fields. The source table that is in another database changed. But the view on my database where the materialized view exist has not changed. I want to confirm from where is data coming in this view
TIA
Ravi

SQL> select * from dict where table_name like 'ALL%MVIEW%'
TABLE_NAME                     COMMENTS
ALL_BASE_TABLE_MVIEWS          All materialized views with log(s) in the database that the user can s
                               ee
ALL_MVIEWS                     All materialized views in the database
ALL_MVIEW_AGGREGATES           Description of the materialized view aggregates accessible to the user
ALL_MVIEW_ANALYSIS             Description of the materialized views accessible to the user
ALL_MVIEW_COMMENTS             Comments on materialized views accessible to the user
ALL_MVIEW_DETAIL_PARTITION     Freshness information of all PCT materialized views in the database
ALL_MVIEW_DETAIL_RELATIONS     Description of the materialized view detail tables accessible to the u
                               ser
ALL_MVIEW_DETAIL_SUBPARTITION Freshness information of all PCT materialized views in the database
ALL_MVIEW_JOINS                Description of a join between two columns in the
                               WHERE clause of a materialized view accessible to the user
ALL_MVIEW_KEYS                 Description of the columns that appear in the GROUP BY
                               list of a materialized view accessible to the user
ALL_MVIEW_LOGS                 All materialized view logs in the database that the user can see
ALL_MVIEW_REFRESH_TIMES        Materialized views and their last refresh times for each master table
                                that the user can look at
ALL_REGISTERED_MVIEWS          Remote materialized views of local tables that the user can see
13 rows selected.

What/Where is the Value Lifecycle Manager (VLM)

What/Where is the Value Lifecycle Manager (VLM)
I was just reviewing an ASUG presentation from Soledad Alvarado Ganzhorn of SAP NetWeaver Product Management at SAP Labs. It describes a value lifecycle manager tool that includes:
&#56256;&#56457;Value Discovery content includes: Interview Questions, Pain Points, Best Practices, Solution Enablers, Value Drivers & KPI's, and Data Requests
&#56256;&#56457; A Knowledge Management Platform Retrieve and Enter content
&#56256;&#56457; A Highly Flexible and Customizable Business Case Building and Reporting Platform
&#56256;&#56457; Used by Value Engineers, Solution Engineers, ISG, Partners and others
Is anyone aware if SAP is using this tool already? Will customers get access to it? This sounds like a replacement for the business case builder which I haven't seen either. It would be nice if customers had access to these sorts of discovery tools. Since we don't utilize SAP consulting, we are often not able to access this content as we initiate new initiatives. It would be nice to have access as it seems like we are internally selling their software for them.

The tool is available. It is at the following URL:
https://sapvalueengineering.com/VLM2/client.page
SAP has nominated select Partners that have access to the tool. You can probably check with the SAP partner relationship manager in your organization to see if you have access to this tool.

Photoshop CC video: Where is the audio flyout menu? I want to set the audio level of a clip but when I click the little triangle the flyout only offers Motion options, no audio.

I created a video clip by ripping from a (non-protected) DVD & brought it into Photoshop CC for editing. I want the audio to fade in & out but cannot find any audio controls!
The info I've found online says to click the little triangle at the right end of the clip & I should get the audio flyout menu, but all I get is a menu with "Motion" options.
Please help!! Where are the audio options I see on the tutorials?
Thanks ...

The audio was indeed in there; I could hear it! But I found the fix:
Some Googling revealed that the timeline video sprites should appear *blue*, not purple as in my screenshot. I'm not sure how that happened, but I scrapped the project & restarted from scratch - and though I can't say what I did differently, this time the video sprite in the timeline was blue, and the audio flyout was there! So it's all good, thanks!

When I import files (copy from jpeg or copy as DNG from raw, where is the full size original stored?

I have the photos go here file, does LR5 put the untouched original there? Do I need my own file for originals and if so, how does LR5 know where to find the full size original? I have everything working but don't understand where my untouched originals go after import. Say I import off my card to My Pictures/Lightroom Catalog/ Photos go here ..... are my originals there? What if I erase my card now, do I only have partial size negatives basically? I don't understand why LR5 didnt put in an originals do here file that imports the full photo to a stock folder. I am so confused I am about ready to throw out LR5. I even bought your instructional DVD and it doesnt make where the original files location clear, it just repeats that LT5 does NOT import the original, just thumbnail and instructions, where is the program getting the photo when I double click to open it , or am I only seeing a lower resolution version of the photo and the full res is now gone because I formatted the card?

When you import photos, you can choose "Copy" or "Move" or "Copy as DNG", and then select a destination folder on your hard disk. This happens on the right hand side of the Import dialog box. So your original files go to this destination folder.
Alternatively, if your photos are already on your hard disk, you can import by choosing "Add" and the original photos remain in the existing location.
If you're not sure where the photos are, open Lightroom, go to the Library Module, and on the right hand side is the Metadata Panel. Set the dropdown to "Default", and it will show you where your photos are stored. Alternatively, you can right-click on any photo and select "Show In Finder"/"Show in Explorer" and Lightroom will take you to the exact folder where the photo is located.
So, bottom line, you are in total control of where the originals go, and if your forgot where you put them, or made a mistake, you can always find out where they are.
What if I erase my card now, do I only have partial size negatives basically?
If your import was successful, then the photos are now stored on your hard disk. So you have the full size original for Lightroom to work with.
it just repeats that LT5 does NOT import the original, just thumbnail and instructions
Lightroom does import the original, which means, in Lightroom jargon, that it records the location and metadata about the photo; in other words, Lightroom knows where the photo is, but Lightroom NEVER contains your photo, your photo is ALWAYS stored on the hard disk.
Because Lightroom now knows where your photo is located, it is important that you not manage your photos (move, edit, rename, delete) outside of Lightroom. Photo managements tasks now must be done in Lightroom. (There are advanced methods that let you manage your photos outside of Lightroom, but these would be NOT RECOMMENDED for beginners)

Where is the hyphen (-) on the apple TV? I am trying to set up my network and there is a hyphen in the password for the network

Where is the hyphen on the apple TV? I am trying to set up my network and there is a hyphen in the password for the network

A few options to try:
They hyphen should be next to the + on the character map.
If you are still having issues, provided your ATV software is up to date, you can now connect an Apple Wireless Keyboard through bluetooth connections.
Change your network password so it does not use a hyphen
Good luck!

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high?
How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?
Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
Thanks for any clarification on these matters.

siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

Where is the binary data of this icon stored and retrieved from Application server?

Hello guys,
Today I observed one phenomenon and could not explain it per my knowledge.
I have one url which points to an icon in application server:
https://<host name>:44301/sap/public/bc/ur/nw5/themes/sap_corbu/common/libs/Icon/SuccessMessage.gif
I could successfully open it via chrome:
and after that I could see an entry in ICM server cache. Everything works perfectly.
Then I tried to check this icon in mime browser in SE80. To my surprise, the folder /sap/public/bc/ur/nw5/themes is empty.
However, the ICM cache shows that there is a subfolder called "sap_corbu" under "themes" folder. But why I cannot find it in mime browser?
Then I write a report to retrieve the binary data of icon via CL_HTTP_CLIENT, and clear the ICM buffer via tcode SMICM.
I expect this time some database table will be queried to load the content of the icon, since now the buffer is not available.
To my surprise again, in SAT no database table is involved.
So now I am confused: since I have already cleared the ICM server cache, where does the icon binary data come from when I run the report to access the icon?
Best regards,
Jerry

Hello guys,
one colleague today told me that there is a zip file "ur_mimes_nw7.zip" in MIME repository /PUBLIC/BC/UR/ur_mines_nw7.zip. I download it locally and unzip it and indeed find many theme folders including sap_corbu folder and its resource files. So I guess there must be some logic done in web application server which will unzip this archive file and put each theme folder to the corresponding folders in application server. I would assume those logic are done outside ABAP stack side, this is the reason I cannot find any hint of them in ABAP backend via tcode SAT even I clear both client and server side cache.
Best regards,
Jerry

Where is the microphone (mouthpiece) on the LG Exalt?

Similar Messages

Maybe you are looking for