Where is the motion and gestures on lenovo K3 note

Is there a way to disable all gestures settings on lenovo k3 note i need to disable mute/pause

I ordered 2 k3 notes from same supplier On the same order , came with different ROMS one has character settings the other doesn't which is a pain . 

Similar Messages

  • Motion and gesture aren't smooth

    how to fix if the motion and gesture are not smooth anymore on my macbook?

    Restart your Mac.
    And clean the trackpad > How to clean Apple products

  • Hazel Motion and gesture gaming

    Does Hazel support Motion and gesture gaming?
    I tried but always give Failed message!

    According to the SE specifications for the Hazel, these features are not supported.

  • Where are the plus and minus keys on a Pavilion dv6-3150us Entertainment Notebook?

    Where are the plus and minus keys on a Pavilion dv6-3150us Entertainment Notebook?  Joe
    Joe B.

    Its on the keyboard somewhere on top center close to the number keys. To be straight, its just below F12 key. 
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • Just completed the redemption process.  Where's the download and installation files?

    Just completed the redemption process.  Where's the download and installation files?

    Go to App Store > Purchases to check the OS X download progress. The installer is stored in Applications folder

  • HT201364 My imac running OS 10.6.8, and want to install software that needs  OS10.7. The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac". Older upgrade better? How to proceed?

    My imac running OS 10.6.8, and want to install Garmin software that needs OS10.7.
    The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac".
    I feel an older upgrade than Maverick might be better for my machine?
    Is it possible to upgrade to ie, 10,7? or another recommended upgrade.
    How to proceed?

    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    A. Upgrading to Mountain Lion or Mavericks
    To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    B. Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Where is the burn and dodge tool in elements 12?

    Where is the burn and dodge tool in elements 12??

    Should be like version 11.  It is on the left in Expert.  Look in the Enhance block.  It can show up as Dodge,
    Burn or Sponge.

  • Where is the calendar and contacts on the new itunes?

    where is the calendar and contacts on the new itunes?

    It should be on the Home page but if you can't find it there go to settings>Genereal>Reset>Reset Home Screen Layout

  • Where does the Calendar and Home Calendar come from ?

    I have two iPhones, two iPads and a Mac that share one Apple id. Where do the Calendar and Home Calendar come from?

    Siretman wrote:
    I have two iPhones, two iPads and a Mac that share one Apple id. Where do the Calendar and Home Calendar come from?
    Are you asking which calender takes president?

  • Where have the Save and View button gone in Lion Mail?

    Where have the View and Save buttons gon in Lion Mail?

    genk wrote:
    Does someone know why  'Today' 'Yesterday' 'Last week' has gone from the Finder window?
    Greetings.
    Try this...
    http://christianboyce.blogspot.com/2011/08/bring-back-for-in-lion-finder-sidebar .html
    I've tried it and it works to bring back today, yesterday and last week...

  • HP Photo Creations - where's the text and graphics tabs?

    I downloaded V 3.5  HOwever I can't seem to find the tabs for text, graphics, etc. All I can find is touchup, crop, red eye, and one or two others. But where is the text and graphics, and the other cool ones.?  I'm sure I downloaded 3.5.
    melodee007

    Hi Melodee.
    The additional editing tools appear with collage projects. When you choose basic prints, you'll see only the touchup tools (crop, image adjustments, red-eye, airbrush, tint).
    In other words, to add text, borders, and graphics, choose Collage Prints instead of Prints. This link will take you there:
    Collage Prints
    There are quite a few cool effects in the touchup section, though.
    Under Image Adjustments, click Advanced Controls at the bottom of the screen to try the Posterize effect.
    Under Airbrush Effects, try the Rub Through, Blur, and Monochrome brushes. 
    Rub Through loads a photo in the background that's slowly revealed as you paint over the original photo. Blur is good for toning down distracting elements in your picture, making a snapshot look like a photo taken with a fancy lens. The photo below uses both those plus the Monochrome Brush.
    Hope this helps,
    RocketLife 
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • What applicable methods can capture the motion and location(b​ehavior) of an underwater vehicle in swimming pool?

    I am searching the methods to capture the motion and location of a underwater vehicle in swimming pool.
    The measured data will be used to verify the created simulation software.
    The underwater vehicle can be control in six degrees of freedom.The swimming pool is about Olympic sized.
    I had some ideas,however I am not sure whether they would work or not;
    Using camera and marker,however it will only work when
    the vehicle is near the water surface..
    Using camera or video cam
    which is located above the pool, however this technique has a problem of light refraction
    between water and air.
    Using blinking signal with
    three receivers, this technique is good in a open water not in a swimming pool
    because the acoustic signal will reflect the walls. 
    Using the pressure sensors
    or a dive record.
    Could you suggest me to the right way? 

    All of the methods you mentioned could work.  And as you pointed out, each of them has its drawbacks.
    It seems that most of the methods you describe only track the vehicle in two dimensions while the motion has six degrees of freedom.  If you want to track all six degrees or even the 3-D position over time a more complex system will be required.
    Since the navies of the world have used primarily acoustic methods for the past 70+ years to locate objects underwater and cetaceans have been doing so for much longer, I would suggest that the acoustic approach is perhaps the best.
    Put sensors at different depths as well as different horizontal positions so that the vehicle can be located in three dimensions.  In most cases the signal reflected from the walls should arrive later than the direct signal from the vehicle, so that should be relatively easy to reject.  You will not have a thermocline in the pool and the walls will be at known distances and angles to the sensors, so it should be relatively easy to discriminate between signals from the vehicle and signals from the walls.  To detect the roll, pitch, and yaw of the vehicle may be more difficult.  If the vehicle is emitting signals, put at least three transducers on the vehicle (more may be required as some sensors will be blocked from a direct path to one or more emitters) to detect those motions.
    Lynn

  • Where does the data get saved from (notepad) or Notes on Windows Mobile 5?

    Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
    (ON the Phone)  Sticky note like program WM5
    I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
    I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
    I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
    Thanks.

    Hi,
    I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
    Regards,
    Zoltán
    http://www.clamagent.org - Free Antivirus for Exchange
    http://www.it-pro.hu
    http://emaildetektiv.hu

  • HT5731 I have an iPhone 4S and when I sync it, the "purchased" and "recently added" playlists do not show up on my phone.

    I have an iPhone 4S and when I sync it, the "purchased" and "recently added" playlists do not show up on my phone. For some reason I can't get all the playlists I have set up in iTunes to show up on my phone. 

    Hi HipstaTrinty,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Click on the link to see more details and screenshots. 
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Cheers,
    - Judy

  • Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

    Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
    Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
    Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

    Funny how you answer to "troll". (What's your handle on AT&T forums?)
    Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
    I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
    Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
    We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

Maybe you are looking for

  • Thin lines in pdf file

    Hi all! I have a question. The same problem in Illustrator CS6 (but it appears from a few version of CS back). I have document in an Illustrator. The document is generally for print, I don't using them to making website, so without using Slice tool.

  • Shortcut-Bug in Bridge CS6 for Mac / Bridge cant' copy and paste metadata

    The cmd-keys / shortcuts doesn't work in the file info panel btw. in the xmp / iptc fields (e.g. cmd+c, cmd+v, ...) of Adobe Bridge CS6 (Mac OS 10.6.8 and 10.7.3). You are not able to cut and paste info from one box to another like previous versions.

  • Quicktime Image IO and JPEG Chroma Subsampling

    This is more of a developer question than a user question, but hopefully someone here will be able to answer it. I'll use the example of using Quicktime Image IO to save JPEGs in an application. There will be a scale of "Least, Low, Medium, High, Bes

  • Press 1 if you think Verizon Customer Service is Awful

    I consider myself Verizon's idea of the "perfect" customer.  First, I have the FIOS Bundle package (phone, internet, TV) with all the bells and whistles, including all the movie channels and sports packages.  And, until very recently, I was a longtim

  • Illistrator will not authenticate under Windows 8.1

    I have a creative Cloud Subscription. Once I use it under Mac OS no problem. But if I try to use it under a Windows 8.1 partition, on the same computer, CC will not uthenticate Illustrator, all other apps are ok and running regularly. Once I lounch A