Where is the "note" field stored ?

Hi,
I need to print the field "notes" contained in several transactions
like FB60, FB50, etc I would like to know the name and table where this
field is stored in order to make a Z program to print it as user requires
this. I tried using technical information with the F1 function with no
results and the field doesn't appear in the BKPF o BSEG tables.
Thanks very much.

Hi Eric,
Thank you for your answer.
Just a question : how can I relate this fields with document number ? I could not find the document number in the tables you just mentioned, so I be able to print the note field for a specific document number.
Thanks !

Similar Messages

Where is the picture field stored in HR master data?

I am developing an organizational chart in BSP from OM in HR module.
I am able to pull out the person name from master data in HR but i can not find the picture field.
Hence my question is, in which table and in which field is the picture stored. If i go to HR master data and do a search for a person i am able to see the picture, so i know it is stored some where but i am not able to find it.
Thanks
Nahman

Thanks for the link. It is very helpful.
But right now i am just doing a prototype, so i am using the persons already in the system. So i dont have to upload any pictures right now. I still could not figure out from the link you provided on how to get the pictur.
I am able to see the desciption using transaction OAAD but i was not able to understand how to get the picture.
Maybe you can explain it to me.
I have awared the points for the post you have posted.
Thanks
Nahman

Where is the Note field in Mavericks' Calendar events?

Created a new event in Calendar today, but couldn't find any way to enter a note about the event. Calendar in Mavericks has a new UI that takes some getting used to, so I'm going to assume that the note function is still there. But where is it?
Bonus question: Is there any way to move the default location of the event editing panel from the upper left corner of the display to somewhere in the middle? On a 27" iMac display, the upper left corner is a rather awkward place to be editing Calendar events.
Thanks!

Is there any way to move the default location of the event editing panel from the upper left corner of the display to somewhere in the middle?
Try to scroll while the editing panel is open

In PSE 13 Organizer, is the "notes" field an actual IPTC data field or a data field only to the organizer?

I would like to access the "notes" field in multiple files and write to it. Is this possible? If so, where is the "notes" field in METADATA information?

99jon a écrit:
OK that will be interesting Michel. As far as I know the notes do not show up in Lightroom but the IPTC fields do.
About Lightroom, see what John R Ellis said :
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Converting_to_Lightroom
So, unless there is a plugin available now, I don't think it will be easy to recover notes from Elements when updating catalogs.
I only wanted to dispell the idea that the 'notes' in Elements are only a field in the catalog database. They are automatically written to the files in a proprietary exif section.
In the organizer, the 'notes' show under the 'general' section on top of the properties panel.
In the editor, you have to open the last 'advanced' tab in the Information panel, section 'schema'.
With an exif editor like exif viewer in Firefox, it's hidden in a section called 'album : Notes'.
About the searchability, I have no problem to find items from significant words in the notes.

How do I get the contents of the "note" field to display on the event in day and week modes?

I am a student and I take the reading and exam schedules from my class syllabi and put them in iCal so I only have to go to one place to see what assignments are due.
I put the class name in the event name field, the classroom number in the location field, and the day's assignment in the note field. When I view the week or day I would like the event box to list all three pieces of information but I can only get iCal to display the even name and location.
Does anyone know how to make the note also display?
Thanks

Can you post a screenshot of the timeline? Which type of actions do the buttons (or click boxes?) trigger: simple or advanced or shared actions? Have a look at:
Why choose Standard over Simple action? - Captivate blog
I suspect that your buttons get into their inactive part, where they will not be functional anymore.

When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI

When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI( I am not getting any error message in E$_TARGET_ANI_TEST).
When i am running the interface i am getting the below error against the errored step
"ORA-01045: user ABC lacks CREATE SESSION privilege; logon denied."
Only E$_TARGET_ANI_TEST is created with no data. No such tables like C$_0TARGET_ANI_TEST, I$_TARGET_ANI_TEST are created and also data is not inserted in the target table TARGET_ANI_TEST.

Hi,
I have checked that only E$ table is created. C$ and I$ table are not created ( I have selected my target schema as the part for the staging table).
All the parameters for dropping the tables are selected as "<default>:false".
I am importing the following KMs with the following parameters:
1) CKM Oracle
DROP_ERROR_TABLE
:false
DROP_CHECK_TABLE
:false
CREATE_ERROR_INDEX
:true
COMPATIBLE
:9
VALIDATE
:false
ENABLE_EDITION_SUPPORT
:false
UPGRADE_ERROR_TABLE
:false
2) LKM SQL to SQL
DELETE_TEMPORARY_OBJECTS
:true
3) IKM SQL Incremental Update
INSERT
:true
UPDATE
:true
COMMIT
:true
SYNC_JRN_DELETE
:true
FLOW_CONTROL
:true
RECYCLE_ERRORS
:false
STATIC_CONTROL
:false
TRUNCATE
:false
DELETE_ALL
:false
CREATE_TARG_TABLE
:false
DELETE_TEMPORARY_OBJECTS
:true

Where are the MMB files stored in unix box

Hi all,
Can anyone tell where are the MMB files stored in unix box. Thanks in advance.
Regards,
Sandeep V

Hi Thomas,
Thanks for the reply, I got the FNDMENU.mmb file , but Iam not able to find the menu item which Iam searching for. There are some special menu items like SPECIAL , SPECIALB and SPECIALC. So, when I select release from plan menu item special27 is called , but Iam not able to find release in this menu. Can you please help me in this regard.
Regards,
Sandeep V

Auto populating the Notes field in XK02/FK02

Hi Experts,
I have a requirement where I need to auto-populate the Notes field with some text.
When the user clicks the arrow next to Email field a pop up comes up. In this pop up there is a Notes field. (Please see the Screen shot)
I want this Notes field to be auto-populated with "Notes".
How can I accomplish this?
Please advice.
Thanks.

Hi -
1. In SE51, go to progrram - SAPLSZA6 and screen 600, you will find in the PBO
MODULE precalculate.                                      "*981i
MODULE d0600_status.
MODULE d0600_output.
LOOP AT g_d0600_adsmtp WITH CONTROL t_control6 CURSOR
    t_control6-current_line.
    MODULE d0600_display_line.
ENDLOOP.
MODULE d0600_cursor.
2. In the 1st three module below check if any user exit / BADI is there .
(a) MODULE precalculate.
(b) MODULE d0600_status.
(c) MODULE d0600_output
If yes check for modifying the value of the field 'REMARK' in the interanl table g_d0600_adsmtp.
Example g_d0600_adsmtp(1)-Remark = 'Notes'
3. If no BADI / exit is available, then go for implicit enhancement in the perform inside MODULE d0600_output. i.e    FORM dynpro_output .
At the end of form    FORM dynpro_output - modify the internal table   ct_comm_table.
Please note - This form may be used by other programs, so you can put some conditions like restricting to trasaction code etc.

Quick qs: Where is the Reconciliation Policy stored under debug?

It seems whenever we import files into IDM, we accidently step over the reconciliation policies set up for various resources. And I do not know where these are stored - which xml files?
I initially thought that these are in the resources themselves - but I was wrong, because even if I do not import the resources, the reconciliation policies are erased.
Please let me know where are the reconciliation policies stored in IDM?
Thanks ia

Thank you - I think that was what I was looking for.
A

ASA5510: where is the startup-config stored?

Hi,
i'm new to cisco's asa and trying to get used to it. it's not a real problem i have, which detains me from productive work but i'm just snoopy about this. on my cisco 871, when i do a
dir nvram:
i see a file called startup-config. but i can not find it on my asa 5510. i have a disk0-1:, flash: and system: but nowhere a startup-config. but it must be somewehre because a
copy tftp startup-config
is working somehow and does what i expect. furthermore, where are the cryptographic keys stored. the same issue. i can not find them. maybe someone of you is able to point me to this. thanks.
ct,

The startup configuration for single mode or for the system in multiple context mode is a hidden file in flash memory. From within a context, the location of the startup configuration is specified by the config-url command. For example, if you specify an HTTP server for the config-url command and then enter the copy startup-config running-config command, the security appliance copies the startup configuration from the HTTP server using the admin context interface.
Also check the details about the commands "copy" and "configure-url" in the links below: 1)COPY--http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2104587
2)CONFIGURE-URL----http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2100481

Where Are The Master Files Stored For iWeb?

I can't seem to figure out where the master files are stored in iWeb. For example I was trying to help of friend with his iWeb website, so I told him to send the files - and then I was planning to load them into iWeb on my computer... but I couldn't figure out where to put them... and he did not know where they were either!
Question: Where are the master files stored for iWeb?

http://docs.info.apple.com/article.html?artnum=303670
http://iWebFAQ.com/1Site2Computers
http://iWebFAQ.com/#Backup

How can I reliably search the "Notes" field in iOS?

I know this isn't strictly an Applescript question, but I've found that the level of knowledge in this particular section of the boards is WAAAAAYYY higher than other sections, so I'm gonna ask this here anyway. FWIW, it does involve AppleScript....
So I really miss the Palm style contact search by first initial and last name. So I wrote an applescript that runs nightly on my iMac and updates any new contacts to include this search term in the notes field. Actually, to be completely honest, some members of this forum wrote most of the script for me.... Anyway, for instance, Joe Smith has "JSmith" placed into the notes field.
Now, usually when I search my contacts like this on my iphone it works like a dream. But sometimes the expected contact does not appear. In those cases, if I open the contact a different way (by searching for "Joe Smith," for instance, I find the contact, open it up, and always find that "JSmith" is actually in the notes field. My Applescript is working like clockwork... that's not the problem. Once I close the Joe Smith contact and retry the "JSmith" search, it now works. What gives?
It's kinda like Spotlight is using a search index for the notes field but not the name itself? And the search index is not getting updated until I manually open the contact? But only on some contacte? Usually it updates itself just fine without my having to open the contact? And then today it failed to find a contact that has had the Palm-seach term in the notes field for at least three weeks. Once I opened it manually, though, it worked.
So... help! Is there a way to force the iphone to manually rebuild whatever database spotlight is using to search the notes field? What's going on?

I've turned on BOLD TEXT and turned on REDUCE MOTION but for me it feels like more than just the zooms in and out... I'm getting sick just reading emails and texts or just glancing at the lock screen. It's intant nausea. The only thing I can think of is that it's something to do with refresh rate or frequency of the screen.
I thought I'd just get used to it but it has not subsided. I only hope I don't have to resort to backgrading to iOS 6 or worse, moving to a different brand of phone.

Is there any way to print the data inside the Notes field of MIR6 Report

Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.

There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.

I am unable to Save the "Note" field while Creation of new Contact

Hi ,
I am unable to save the Note field while Creation of Contact in Web UI.
Its happening in the Dev system but not in the QA Web UI.
I have tried to debug the component BP_CONT, But no use.
Can any one tell me the what could be the problem?
Regards,
DN

Hi DN,
The Notes part comes from the following view:
BP_DATA/Notes (Context Node: NOTES; Attribute: TDLINE)
You can debug in this view.
It could also be a case of missing authorization - the entered text don't get saved when the user does not have authorization to save text in text objects. Please check.
Regards,
Shiromani

The note field is in non-editable mode in appraisal document

Hi all,
In appraisal document,
the reviewer can give his comment in the status u201CIn Processu201D and in the Sub Status u201CAnnual Review by Addl Managers/Reviewersu201D in an appraisal document. It is editable when I am trying via web but when I try to upload the comment from backend GUI ( using phap_admin) the note field is in non-editable mode. My client requires it in editable mode at the back end.
Can any one help me on thisu2026

Hello Girish,
Can you please check the appraisal template, Proper access has been given to use the note column. If still faces problem can look for the BADI HRHAP00_COL_ACCESS.
You can look for the following notes also :
1554467 column access does not work
Best Regards,
Deepak..

Where is the "note" field stored ?

Similar Messages

Maybe you are looking for