Where is the official documentation for Wireless OTA Enterprise App Distribution?

Where is the official documentation for Wireless OTA Enterprise App Distribution? It used to be here:
http://developer.apple.com/library/ios/#featuredarticles/FA_Wireless_Enterprise_ App_Distribution/Introduction/Introduction.html
The above link is present in many posts in these forums (cf. More Like This below this question.
The information I seek may also have been here:
http://support.apple.com/kb/index?page=answerlink&url=http://manuals.info.apple. com/en_US/Enterprise_Deployment_Guide.pd…
The article in question had official details on
the itms-services:// link,
the app manifest file format and
the general information.
Currently I cannot find anything official on enterprise app distribution - only third party information. Has something changed, or is this a documentation glitch? Surely wireless OTA enterprise app distribution is still available via the enterprise developer program?
Note: We currently use this for one of our enterprise clients. But before recommending other clients to join the enterprise developer program, we would like an official citation on whether this mechanism still exists.

OK, the link in my question is no longer a 404. It's been replaced by a redirect to a new iOS Enterprise Deployment subsite which has been remade for iOS 8.
http://www.apple.com/iphone/business/it/deployment.html
My actual question about the technical reference is now located in the iOS Deployment Reference section of Apple Help:
https://help.apple.com/deployment/ios/#/apda0e3426d7

Similar Messages

MCVCR80.dll missing..... Where is the official guide for what to do?

My Itunes went down the drain at the latest upgrade. I see that there are some discussions here at the support site, but where is the official guide from Apple for what to remove and what to do?
- Claus

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Where is the official ROM for S650 and instructions

Hi,
1. Where can I find the official stock rom for the S650 and instructions on flashing, in case something goes wrong and I need to reflash the phone.There doesn't seem to be anything on the Lenovo website other than the source code.
I saw the this link http://www.needrom.com/download/lenovo-s650-vibeui-2-0-2/. But its not an official Lenovo website and it says developer version.
2. Is there an AOSP port or Cynogen etc for the S650?
Thanks.
Solved!
Go to Solution.

Hi
1.I can guarantee that THIS is 100% official ROW (after flashing this you can OTA update to the latest available ROW firmware).
2.HERE you can find S650 AOSP/MIUI/LeWA ,etc ports (use google translate)
See message 7 of http://forums.lenovo.com/t5/Lenovo-Phones/Lenove-S650-sound-issue/m-p/1413747#M3660 for flashing instructions(Flash Tool V3/V5).
Hope it helps
Cheers.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

HT4759 Where is the website address for my iCloud content, apps, email etc?

Where is the website address where I can access and manage my iCloud content, apps, email etc?

Apps are not in iCloud. They are in App Store and you can access them through iOS device.
For Email, Contacts, Calendar, Notes, Reminders and iWork go to www.icloud.com from a desktop browser.

Where is the reference documentation?

Where is the reference documentation for Stage3D APIs?

I guess you are looking for something a little more explanatory.
Unfortunately there isn't much Adobe has published, in terms of how to use the Stage3D api. For example, there should have been something written in the following but there wasn't (other than a somewhat strangely orphaned AGAL reference in the appendix):
http://help.adobe.com/en_US/as3/dev/index.html
There are, however, a number of third party articles around that emerged during the "molehill" incubator and beta development phase of the api. These have been put together by those reading the otherwise dry reference docs and coming to terms with what they meant. Marco Scabia was one of the first with some well written articles, and here are the essential two he's written for Adobe. These about as close as Adobe has come (so far) to an official dev guide on Stage3D. But they do their job well and highly recommend them:
http://www.adobe.com/devnet/flashplayer/articles/how-stage3d-works.html
http://www.adobe.com/devnet/flashplayer/articles/what-is-agal.html
There are more articles you might enjoy at Marco's website:
http://iflash3d.com/

Where's the FREAKING manual for the DigitalLife Security System?

Where is the printed documentation for the AT&T DigitalLife Security System? The so-called on-line system is PATHETIC and UNUSABLE, as it is impossible to(a) get it to run at all and (b) has light gray TINY printing on a white screen, making it UTTERLY impossible for senior citizens like myself to read (when we can get it to appear at all). After all the time and money I've spent on this system, I WANT SOME DOCUMENTATION!
Ed N
Galloway, Ohio

Access Help is what you're looking for.
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

Where are the official microsoft ISO's for windows 10 preview?

Hi All,
Where are the official Microsoft ISO's for Windows 10, 10051 and 10056 preview? They are all over the web, but I don't trust them unless they comes from Microsoft itself.
Many thanks,
-T

To ToddAndMargo,
RE : Is there a way to manually go to Windows Updates and manually download a particular file
No. All updates will be downloaded and installed automatically. You don't get to choose which to install and which to decline.
RE : And I can't find 10049's ISO either (from Microsoft).
As of now, the only most current ISO available is for build 10041. Build 10049 ISO is not yet available.
When build 10049 is released from Slow ring, usually it is also the time its ISO will be released.
RE: ESD file. How?
One cannot download an esd file of build 10049 from Windows Update.
You download and install the entire build 10049 via Windows Update. When it is done, you can then find its Installed.esd file from RecoveryImage folder and use it to manually create an ISO fie. You will need a specific program to create an ISO from Esd.
You might ask " why do I need an ISO fie if the operating system is already installed ?"
Some users are advocates of "clean install". They prefer clean install over upgrade install. Clean install can be done by burning the ISO file into a bootable DVD or an USB with at least 4 GB capacity and use it to install.
You can also use the same media and install in another compatible computer.
It can also serve as an emergency backup incase you need to reinstall.

Where do I find documentation for the WinRT / Windows Universal versions of CloudBlockBlob?

I am developing a Windows Universal app in which I need to upload a FileItemThumbnail to Azure blob storage. One thing that is making this tricky is that I cannot find the correct documentation for CloudBlockBlob. For example in the documentation I can find
(https://msdn.microsoft.com/en-us/library/azure/microsoft.windowsazure.storage.blob.cloudblockblob.aspx) the method
UploadFromFileAsync has a number of overloads each including a System.IO.FileMode parameter. But System.IO.FileMode is not available under Windows Universal. Using the metadata in Visual Studio I see that the two overloads of UploadFromFileAsync available
to me are:
public IAsyncAction UploadFromFileAsync(StorageFile source);
public IAsyncAction UploadFromFileAsync(StorageFile source, AccessCondition accessCondition, BlobRequestOptions options, OperationContext operationContext);
Where do I find the documentation for the WinRT / Windows Universal version of CloudBlockBlob?

Hi,
You could refer the following links for documentation on uploading and downloading files from Azure Storage with Windows Universal App.
https://code.msdn.microsoft.com/windowsapps/Universal-Windows-Apps-1ea96689
https://code.msdn.microsoft.com/windowsapps/How-to-operate-Azure-blob-f0210e2e
http://blogs.msdn.com/b/webapps/archive/2014/09/24/upload-and-download-files-from-azure-storage.aspx
Hope this helps.
Regards,
Malar.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

Where can I find Documentation for Oracle financial installation

Hi
Where can I find Documentation for Oracle financial
installation as which all modules to be downloaded for linuk server etc
here is what I have found
===================================
Oracle9i Application Server, Version 1.0.2.2.2 CD Pack for Linux x86 [Act as Server][to be installed on main linux server]
===================================
OracleÂ® Applications 11i Release 9 CD Pack for Linux x86 [Act as client][to be installed on client sean,AJ,Vinod]
===================================
Internet Developer Suite (1.0.2.4.1) CD Pack (with iAS Pack) for Microsoft Windows (32-bit)
===================================

user11872870 wrote:
Hi Tubby,
http://www.quest.com/documents/list.aspx?SearchOff=true&ContentTypeID=20&prod=1
This link has many pdf files but none has the useful information. Those pdf's are just 2 or 3 pages each.Sad Christmas for you then i suppose.
Perhaps you could contact the vendor (quest) and get them to help you in your search for whatever it is you're looking for. An Oracle SQL and PL/SQL forum is not the venue for this, please mark the question as answered, and good luck in your search.

Where is the IP number for a HP deskjet 3520 e-all-in-one, needed to install into windows 7?

Where is the IP number for a HP deskjet 3520 e-all-in-one, needed to install into windows 7?

Hi - You can print a test page to get the IP address for your printer. Follow these instructions:
On the printer control panel, press the Wireless button ( ), and then press the button ( ) next to Settings .
Press the Down Arrow ( ) to select Print Report , and then press OK .
Press the Down Arrow ( ) to select Test Report , and then press OK .
The printer prints the test page.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

HT4623 Where is the serial number for a refurbished iphone 4S located?

Where is the serial number for a refurbished iphone 4S located?
How do i activate this phone if I am upgrading from a Blackberry?

Tprince01 wrote:
Where is the serial number for a refurbished iphone 4S located?
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
Your Blackberry is unrelated to activating your iPhone. That is a question for your wireless carrier.

Where is the FM documentation

hi everybody
where is the api documentation of crm functions like crm_order_read, crm_maintain_order, etc.
in tc sm37 i got messages like "help is not available in english"
it's really hard to use FM without documentation, it's in crm CD's???
thanks
rgds
A. Garduno

Hi Gerardo,
The others are right saying that you have to test the reports, that is the best way to learn it.
Please note that CRM_ORDER_READ and CRM_ORDER_MAINTAIN exist as ABAP Reports too. So if you search with SE38 you can find the two reports. These reports are used for calling the both FM for test reasons. That is how I was able to find some information about these two reports. I will not paste it to the post as it will become too large. But you can get it too by doing the following steps:
1. Goto SE38 and paste the report name
2. Select the radio button "Documentation" and click on the DISPLAY button
A new window will open containing some more information about the two reports - in English.
I hope this will help you to some extend.
Cheers
Borislav

The official 'Looking for PSN Friends' thread.

The official 'Looking for PSN Friends' thread
Hi all!
I thought it was about time we had an official thread for people who are looking for PSN friends as they seem to pop up quite frequently and it's nice to keep it all in one place!
It's also a handy place for any newcomers to introduce themselves to the community!
To take part is very simple, all you need to do is post:
Your PSN ID
A little bit about yourself
Games you play regularly
Days & Hours you game
Platforms Owned
Fellow forumers can then reply asking if they can add you, remember to mention this thread when submitting a friend request as no-one likes blank requests
I'll start the ball rolling...
PSN ID: Envisager
About me: Community Manager for SCEE, Ex MVP and long time forumer, Lover of music (ex DJ)
Games I play regularly: FIFA 13, Black Ops 2, Far Cry 3 (PS3)
Days & Hours of gaming: Most evenings after 7pm and weekends during the day.
Platforms Owned: PS3 & PS Vita

Hey folks, how you doing? My name is Chris, 26 from Glasgow. I was a very keen gamer at a young age, heavily into my Sega mega Drive and Super Nintendo, i then didnt play much until Sega Dreamcast where I became obsessed with the likes of Shenmue, Jet Set Radio, Skies of Arcadia, i then followed up with a Playstation 2 where I played Final Fantasy 10, Tomb Raider, Reisdent Evil, I also had a Nintendo Gamecube and liked the platformers like Super Mario Sunshine, Zelda, Sonic, Super Monkey Ball, I then drifted off gaming for some reason, mainly lifestyle was more interested in going out being a student etc. I have been hooked back in as I got a Playstation 3 for Christmas, very late I know 7 years oops oh well Im hoping to get a good 2/3 years off this as I have such a back catalouge to play with and PS4 probs wont get going for a year or so and I wont pay launch prices. I have an ecletic taste but I prefer action/adventure, rpgs, platformers a little kiddish I know but its a lot of fun, I prefer more problem solving games but do like instant fix racing games. My PS3 collection (games i got for xmas) is Uncharted 3 (my fave, completed it already but will go back to get Trophys, will be checking out the other 2, love a good story) Final Fantasy 13 i think? Only played an hour of that but might do some of that tonight. Sonic Generations which is what I would say I play when I dont want something too hard, Gran Turismo which is really fun but I know nothing about cars so I only find it semi interesting, Resident Evil 6 which I have played an hour or so off, its still to grip me, I was a huge fan of Code veronica on Dreamcast and Res 4 on Gamecube but this isnt as good for me...yet. And the Tomb Raider trilogy which I love, but I still prefer the original games by Core Design. So please add me folks as I have no online friends, i will be getting more into the online RPG thing in the near future, people have recommended Skyrim to me if you can think of any I would like please give me a shout. I consider myself to be a good gamer, competitive but perhaps a little rusty as i have been out the scene a while. get adding parsonageflat5 bye for now

Where is the kernel documentation?

I noticed that the kernel26 package contains the kernel and the source too, but where is the kernel documentation?
i found some pages on the Wiki referring to /usr/src/linux-2.6.16-ARCH/Documentation ...
but i dont have the Documentation directory, i searched for a kernel documentation package...didn't find any...

Arch doesn't include the documentation in the kernel package - those wiki references are incorrect. I expect a quick google would find them online somewhere for you, or you could always download the complete source tarball from kernel.org.

Where is the official documentation for Wireless OTA Enterprise App Distribution?

Similar Messages

Maybe you are looking for