Where is the Often Referred to "Toolbox" for the OfficeJet 8600 plus

The Printer Assistant reached by the Control Panel is not the same format as the one loaded when I first installed my printer. That Printer Assistant was a complete dashboard. I don't know when it disappeared from my desktop but it is no longer there. I would like to have it back but I don't know how to find it.

Hi JLDNE,
Thank you for your reply!
I would try the following:
1.) Firmware update. Getting the Latest Firmware and Product Updates.
2.) Uninstall the software. Uninstalling the Printer Software.
3.) Use the HP Printer Install Wizard for Windows for the re-install.
Hope this helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

Where can I get a 2nd Tray for this HP 8600 PRO and how much? I am in Brisbane

Where can I get a 2nd Tray for this HP 8600 PRO and how much? I am in Brisbane
Thanks
Ftcukoz

Hi,
The brochure says only available in the US or North America only:
http://www.hp.com/hpinfo/newsroom/press_kits/2011/InnovationforImpact/OJ8600_Series_FeaturesGuide.pd...
But you can order from the following shop:
http://www.techbuy.com.au/p/186748/PRINT_ACCESSORIES_PAPER_TRAYS/HP/CN548A.asp
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to set Default COPYING for HP Officejet 6500A Plus to DRAFT Quality?

How do I set to Default COPYING quality to DRAFT for HP Officejet 6500A Plus?
This question was solved.
View Solution.

Hi,
Tap Copy on the printer front panel, then tap the Settings button.
Tap Quality and select Draft / Fast.
Tap Set as New Defaults and then select Yes to confirm the changes.
From now on draft quality will be used for copying unless any other quality will be selected.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can I install the HP 8600 plus to my Mac 10.9.2 in order to scan???

HELP!!!
How can I install the HP 8600 plus to my Mac 10.9.2 in order to scan???

Hi,
Please try the following package:
http://ftp.hp.com/pub/softlib/software12/COL51752/oj-125213-2/HP-Inkjet-SW-OSX-Mavericks_v12.34.37.d...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do i print from my ipad to the officejet 6500a plus?

I read there may be something else required. I want to print directly to the Officejet 6500A Plus. Apple says ths is an Air Print printer capable of doing that. I'm not taking this monster out of the box until I know it will do what I want without a lot of trouble. Thanks.
This question was solved.
View Solution.

Ok, so you were talking about needing the update. It's hard to say as it all depends upon if it came with the new firmware or not. It is not really relevent, however, since it will update itself upon enabling Web Services. This process takes only a few minutes. There is no computer necessary for the firmware update as long as the printer has internet access (i.e. connected directly to a router via either ethernet or wireless). Yes, with an ad hoc connection, you will be able to print from the iPad, but you would have to use its 3G connection as opposed to going through your router. It can only support a single wifi connection also. Go ahead and set up the printer and keep me posted as to what happens.
BTW - What is the issue with your PC that it cannot access the internet?
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided.
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Officejet 8600 Plus e N911g - Workaround for Toolbox Ink Level display

This is with a hard wired Ethernet hookup. I bypassed the router so as to eliminate any problem passing signal thru. It worked with and without the router.
Until HP comes up with a fix for the two way communication problem that everybody is having, I stumbled on a way to workaround this.
1. Turn printer OFF
2.Start HP Officejet 8600 program from desktop icon or from HP folder in Programs.
3.Select "Estimated Ink Levels" from Shopping Resources.
4. Toolbox (Network) should appear. (The computer is unable to establish two-way communication with the device.)
5.Turn printer ON
6. Select "Estimated Ink Level " tab. Ink levels should appear. If not, then select "Refresh" once or more times.
All other tabs should also be available. This will only work one time. You will have to turn printer OFF again and start procedure over.
This worked on Windows 7 x64 and Windows XP 32bit both on the same network with a Linksys DIR-655 router.

Hello,
If you are referring to the printer display in your below description "Then abt 6-weeks ago the display option for Scanning and Display Ink Levels just disappeared,", then i guess you may have to do the follwoing....
1> While the printer is ON, unplug all the cords from back of the printer.
2> Wait for full 60 seconds.
3> plug in the power cord directly into a wall outlet ( bypass the surge / power strip ) and then into the printer.
4> If the printer is not powering on, press the ON button once to do so.
5> If the display issue still exists, then try tilting the display.
6> If issue still persists, then call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Will the officejet 6500a plus be ready for printing when the mains supply is turned on

I am considring the purchase of an Officejet 6500a Plus (duplex is a prime reason) it will be used in a home office environment with Win 7 operating system. I can remotely swithch on the mains supply to the printer and router. Will the printer be available to print (after start up checks) without further intervention? eg. do i need to depress the start button on the printer?
Many thanks in anticipation Jimbow

The printer should come up "ready" after a minute or so and accept print jobs without any intervention on the front panel.
That said, it would be much better to leave the printer turned on and let the automatic power management take care of putting the printer into a low power state. If you remove power from the printer remotely there is a risk of having the printheads not properly capped after a print job. This can cause the printheads to dry out, causing print quality issues. It will also result in extra ink being used when the printer power is restored as more servicing will be performed on the printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Wireless configuration for HP OfficeJet 6500A plus All-In-One printer on Ubuntu 10.04

I have bought a HP OfficeJet 6500A plus All-In-One printer CN557A, which I want to use with ubuntu 10.04 64-bit as a wireless network printer.
Before i bought i checked compatibility on www.hplipopensource.org and www.openprinting.org, and all was in order.
The machine is autodetected and fully functional when connected with a usb cable, but i have not managed to get it to work as a wireless printer.
This is what I did:
I configured the printer on the wireless network (through the printer interface), and it connects. It prints out a "Wireless Network Test Report", and everything works. I can ping to its local ip adress, and access it through the browser. HP eprint also works.
I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognise the device.
I ran 'hp-check', which gave no errors or warnings:
tjoff@mek-403-jakbo-01:~$ hp-check
HP Linux Imaging and Printing System (ver. 3.11.10)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux mek-403-jakbo-01 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 16:11:24 UTC 2011 x86_64 GNU/Linux
Distribution:
ubuntu 10.04
Checking Python version...
OK, version 2.6.5 installed
Checking PyQt 4.x version...
OK, version 4.7.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.11.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW"
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.11.10
date_time = 2011-11-16 14:30:35
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
device_list =
interval = 5
| DISCOVERED USB DEVICES |
Device URI Model
hp:/usb/Officejet_6500_E710n-z?s HP Officejet 6500 E710n-z
erial=CN16F2402Q05JW
| INSTALLED CUPS PRINTER QUEUES |
B-403-271-A4-COLOR2
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color
B403-271-A4-BW
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW
HP-Officejet-6500-E710n-z-FAX
Type: Printer
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
PPD Description: HP Officejet 6500 e710n-z, hpcups 3.11.10
Printer status: printer HP-Officejet-6500-E710n-z-FAX is idle. enabled since 2011-11-16T01:00:45 CET
Communication status: Good
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0x5412 at 002:005:
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
Device node: /dev/bus/usb/002/005
Mode: 0664
| USER GROUPS |
lp adm dialout cdrom plugdev lpadmin admin sambashare vboxusers
| SUMMARY |
No errors or warnings.
Done.
I then ran 'sudo hp-setup', chose the device (which was detected), chose my wireless network, entered the wireless security key. On the configuration results dialog I get two messages:
"Your printer has been succesfully configured on the wireless network. You may now unplug the USB cable"
and
"The Ethernet cable is plugged in which will prevent you from connecting to a wireless network. To connect wirelessly, remove the cable and try again. (VSA000)"
There is no ethernet cable plugged in, so i can't remove it. I unplug the USB cable and click 'finish'. This makes the 'hp-setup'-dialog start over again, and the printer has not been installed.
In the terminal i have the following:
tjoff@mek-403-jakbo-01:~$ sudo hp-setup
[sudo] password for tjoff:
HP Linux Imaging and Printing System (ver. 3.11.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching on USB bus...
GET /IoMgmt/Adapters HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
error: Missing response key: 'iorotocols-iorotocol-dd:dnsserveripaddress-0'
GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks/SSID=mVnmXfsu HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
I then tried to reconnect the printer usb cable and run 'hp-toolbox' and click "Wireless/wifi setup using USB". Now i get the error:
tjoff@mek-403-jakbo-01:~$ hp-toolbox
HP Linux Imaging and Printing System (ver. 3.11.10)
HP Device Manager ver. 15.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.11.10)
Wifi Configuration Utility ver. 1.1
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Channel write error
error: An I/O error occurred. Please check the USB connection to your printer and try again. (Device I/O error)
Done.
I do not how get past this stage, and any help is welcome.
This question was solved.
View Solution.

A friendly soul on ubuntuforums pointed out to me, that the wireless configuration is only necessary when the printer is NOT connected to a (W)LAN. So all I really had to do was to configure the printer in the CUPS administation page, and it worked. Problem solved. Silly me.

Set password for HP Officejet 8600 wifi network

I have an HP officejet 8600 all in one printer. My issue is it has its own netwrok "HP-Print-EC-Officejet Pro 8600".This network appears on my list of wifi networks and is public where anyone can join How do I make it private?

hpuser20151 wrote:
I have an HP officejet 8600 all in one printer. My issue is it has its own netwrok "HP-Print-EC-Officejet Pro 8600".This network appears on my list of wifi networks and is public where anyone can join How do I make it private?You need to turn off this SSID, Wireless Direct (ad-hoc) in the printer. Now you connect to your routers SSID which is encrpted, WPA2-AES and has your network password.

Does the Officejet 8600 Pro Premium N911n printer perform auto tray selection?

I have an Officejet 8600 Pro Pemium N911n printer, CN577A with two trays. My Operating Sysem is Win8,64bit,there are no error messages, no system changes.
The HP Officejet Pro 8600 e-All-in One series User Guide states that By default, the printer draws media from Tray1.If Tray1 is empty, the printer draws media from Tray2(if it is installed and loaded with media. I have Tray lock disabled ,Tay1 the default Tray and Automatic Tray Selection enabled.Prior to making these selections,I contacted HP support via email to report that this option was not working. I received a response that there is no method that will automatically select a tray when one tray is empty. The User 's manual states otherwise..This option might not work but it is part of this series of printers. I have both trays loaded and I will determine if it works after Tray1 is empty. Does anyone have one of these printers and the auto Tray function works? Thanks.
This question was solved.
View Solution.

Hello wardell1,
Please take a look at this document and let me know if the troubleshooting steps help resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Scan to computer as PDF for HP OfficeJet 8600 Pro plus e results in a single pdf doc.

Hello. I have previously scanned docs to my computer running Windows 7 Ultimate using this printer with no problem. However, I think I did them as "everyday" format. Today I had 5 documents to scan to computer so I could have elec copies and also could attach them to emails. When I was done with one doc the screen asked if I had another to scan. I clicked "yes" rather than done. To my dismay all the docs came out fine as PDF on my computer, but they were all connected as a single doc.??? How do I do multiple can to computer as PDF so they result in separate docs?
Thanks

Hello @mjomega,
Welcome to the HP Forums!
I understand your Officejet 8600 is scanning single documents, instead of multiple documents. I will do my best to assist you! When scanning multiple pages, it's a lot easier to perform this option from your computer using the HP software.
I am going to provide a HP document on How to Scan: Windows 7. Click on "How to scan multiple pages into a single file". This will allow you to scan from the Printer Assistant.
Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

Where are the K8N Diamond Plus Boards

I ordered my board from Tiger Last week. Was told they on back orderd...
Went to newegg.com .... out of stock.
Checked about 3 other places I go and they are out of stock. I want a retail box for the MSI Warrantee and all the extras they give you with the board.
Is there a problem with production??

Quote from: Bas on 09-June-06, 23:36:29
Those are not OEM....no way....as MSI doesn't make Diamond Plus OEM boards.....
However, MSI does warrant those boards in full if you can show a proof-of-purchase.
These are NOT OEM.
Anyway, if you don't need the cables and stuff, it's a good deal.
OEM boards have different numbers and BIOS, they are not the same.
If what you said is true, and if I could "buy" the plate for the back of the computer I would do it.
Here is my last chat with Newegg.com
Chat InformationPlease wait while we connect you to a Newegg representative. You are number 2 in the queue.
Chat InformationThank you for contacting Newegg. My name is Allen. How may I assist you today?
Tim: Item #: N82E16813130037R says OEM but MSI does NOT make this board in an OEM version. Is it just safe to assume they are open boxes or retruns?
Allen: this is an open box item/refurbished
Tim: ok, is it possable then that it would come with all the cables and stuff?
Allen: no Sir, just by itself
Allen: has only 15 days for a refund
Allen: no guaranty from manufacturer
Tim: would it be coverd by the MSI 3 year warantee
Allen: I am afraid no
Tim: errr. and if you send it back for a refund is there a "restocking fee?"
Allen: contact us with a reason and we will waive that fee for you
Tim: thanks for your time Allen
Allen: Welcome

Very slow printing after upgrading to Mavericks and reinstalling HP s/w for an Officejet 8600?

Before upgrading to Mavericks, my HP 8600s (have 2) would zing at printing. Now they are incredibly slow. I had to do a Restore after my operating system upgrade and after that, the HP folder was not in the Applications Folder. That caused me to reiinstall the HP s/w for the 8600 which I downloaded from the HP website taking care to download and install exactly as was prescribed for the Mavericks scenario. I'm wondering if the problem is that I chose the bonjour versions of each printer when I reinstalled to each printer.
An idea of what I mean by slow is a one and half page letter is taking over 5 minutes to print whereas it used to print at about 30 seconds.
I need some help on this ASAP because my home-office is at a standstill. Many thanks.
Tulsa Lawyer

Hi BerniePiel,
Choosing the Bonjour version means you have chosen the wireless option. Bonjour is a technology that is built into Mac OS and iOS. This technology discovers devices such as printers that are installed on the same network as a Mac or Apple mobile device. Bonjour is the default method for discovering devices on a network.
I can certainly help you with this. When you added the printer, did you add the printer with the 'AirPrint' driver or are you using the HP driver? Us the screenshot below to help you check.
If you do not see AirPrint next to your printer name as shown above, delete the printer and re-add it. When you click the plus symbol you need to choose 'add another printer or scanner', then select your printer and choose the HP driver next to 'Use'.
If the issue persists, or you were already using the HP driver, try the following steps.
Reset Printing System
Click the Apple icon (   ), and then click  System Preferences.
In the Hardware section, click  Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OKto confirm the reset.
Type the correct  Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click  Utilities.
Double-clickDisk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions  button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the computer
Once these steps have been complete, re-add the printer again, and print. Please let me know if this resolves the issue. If the issue persists I will gladly follow up and continue to work with you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Part number for hp officejet 8600 feed roller

I have a HP OfficeJet pro 8600 . What is the part number for the cassette feed roller ? Mine has ripped apart.

Hi Babs,
Unfortunately, there is not a separate brightness setting for the number pad. If it is too bright for you, you might try turning down the brightness some in the setting you found earlier.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Need updated drivers for OJ Pro 8600 Plus Win 8.1 64 bit

My 8600 constantly loses it's connection to network and needs to be shut off and restarted to correct. I noticed my drivers are out of date, but when I try to download updated drivers, I am prompted for a password. My Forum password doesn't work, or the one I wrote down on origuibnal installation.

Hi,
Please download directly the following files (dated Aug-17-2014) and install to your computer, much faster this way and no need to enter password:
http://ftp.hp.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Where is the Often Referred to "Toolbox" for the OfficeJet 8600 plus

Similar Messages

Maybe you are looking for