Where is the oracle linux 6.4 installation screenshots documentation ?.

Hello
Some questions.
1. Where is the oracle linux 6.4 installation screenshots documentation ?.
2. Is the disk layout documentation/swap sizing information listed in documentation ?.
I have 8GB memory installed on a 64 bit machine
I want to install the swap partition at the end of the disk.
I want to install oracle 11gr2 database software as well.
--Cheers Glenn
oracle otn
(11.2.0.1.0)
Edited by: Avi Miller on Apr 17, 2013 3:30 PM to remove download links.

The installation guide available at https://linux.oracle.com/documentation/ may require some updating. Last time I checked, chapter 16.16.5. Recommended Partitioning Scheme, did not include the swap space required for hibernation mode.
It is mentioned here:
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Installation_Guide/s2-diskpartrecommend-x86.html
Swap space size recommendations issued for Red Hat Enterprise Linux 6.0, 6.1, and 6.2 differed from the current recommendations, which were first issued with the release of Red Hat Enterprise Linux 6.3 in June 2012 and did not account for hibernation space.

Similar Messages

Oracle Linux 6.2 Installation Issue

Basic Oracle Linux 6.2 installation problems.
There are two iso files supplied for the installation.
V29609-01.iso (install files)
V29610-01.iso (bootable disc)
I boot from V29610-01.iso and the setup files run fine.
I am then prompted to identify the location of the second disc.
I encountered a problem where my DVD drive door would not open to insert the second disc.
To work around this problem I created a partition on my hard disc to copy
the installation files for the second disc to.
I boot from windows 7 (my primary operating system) and copy the installation files from the disc
to the partition.
I reboot from V29610-01.iso.
When prompted to identify the location of the install disc/files on my hard drive
I selected the drive where I copied the files to and press <enter>
I receive a message that it cannot find the image disc there.
I shut down.
I boot from windows 7 and this time copy the actual disc image
V29609-01.iso there instead
I reboot from V29610-01.iso and repeat the same procedure.
It still can't locate the disc image.
(I noticed the boot disc always defaults to the following structure in its displayed path \image\image.img
for the image file that it is trying to locate)
I shutdown.
I boot from windows 7 and this time create a directory called image and
rename V29609-01.iso to image.img and copy it to the image directory. Still no luck.
Why can't it locate the disc image?
Thankyou

@ O.P.,
What are you actually trying to accomplish? Replacing your Windows OS with dual boot Linux? In the later case I recommend you to use VirtualBox and forget about the old-fashioned and obsolete dual boot. Of course your system must not be older than 7 years with a x86_64 CPU and VT-x or AMD-d option. Why do you want to install a 32-bit OS?
Anyway, the V29609-01.iso install DVD is bootable. You will need to burn the .iso disk image doing a raw disk copy, but not the content of the mounted .iso image or you will loose the bootloader. There is plenty of information in Google searching for "burn iso image". If you use Virtualbox you can boot right of the disk image file without burning a DVD.

Where is the Oracle Portal forum?

Hi everyboy!
I have a question about Oracle Portal version 10
If there is someone who knows where is the Oracle Portal forum ?
Please responde me. Because I haven't found it, and it's very urgent.
I expect your prompt reply, any help will be very appreciated.
Thank you in advance.
Best Regards

Erik,
Please visit:
Oracle Application Server PortalBest wishes,
-Michael

Where is the Oracle VM Server for SPARC 3.2 SW download?

Where is the Oracle VM Server for SPARC 3.2 SW download?
Tips leading to a successful download of the correct SW may be rewarded with German beer.

Many thanks for your answer.
Can you point me toward something, which I can show our customer indicating when 3.2 will be GA for Solaris 10?

How can i download the oracle linux

i want to download the Oracle Linux Release 6 Update 1 in "edelivery.oracle.com",but when i click the download button,it shows
"Thank you for accessing Oracle E-Delivery. Due to your country location, we are unable to process your request. If you have an active support contract, you may request physical media by either submitting a Service Request or calling Customer Support. If you wish to purchase or evaluate our products on a 30-day trial please contact then appropriate Sales Representative for your country. "
and i also can not download other soft in "edelivery.oracle.com", it seems that the oracle donot allow download the soft in my country,can someone else give me other url to download the oracle linux ??
thanks.

user11994122 wrote:
i want to download the Oracle Linux Release 6 Update 1 in "edelivery.oracle.com",but when i click the download button,it shows
"Thank you for accessing Oracle E-Delivery. Due to your country location, we are unable to process your request. If you have an active support contract, you may request physical media by either submitting a Service Request or calling Customer Support. If you wish to purchase or evaluate our products on a 30-day trial please contact then appropriate Sales Representative for your country. "
and i also can not download other soft in "edelivery.oracle.com", it seems that the oracle do not allow download the soft in my country, can someone else give me other url to download the oracle linux ??
thanks.No.
It would be illegal for anyone to do that.
Moderator Action:
This post is now locked.

Oracle Linux 6 u3 Installation via FTP

There is a need to install OS (Oracle Linux 6.3) via FTP. The installation process started fine, but after I'd finished with partitions layout and hit "next" on the window displaying "boot loader operating system list", error appeared.
the error: "Unable to read package metadata from repository. This maybe due to missing repodata directory. Cannot retrieve repository metadata(repomd.xml) for repository".
Ftp shared folder is OS iso file itself.

What you are trying to accomplish is creating a local mirror of the software distribution. If you can't download from a mirror and you have the install DVD, copy the complete content and structure to a locally hosted HTTP or FTP directory.
As already mentioned, you need to specify the path to the root of the installation from where you can browse the "repodata" and "server" directory.
You can see what the installation is looking for by opening the repodata directory and analyzing "repomod.xml". This will show you the relative path and filename including the primary.sqlite.bz2 file.
Make sure all your files and directories in the installation root have world read and execute privileges (chmod -R 755 /install dir) and make sure your ftp server is setup accordingly providing the right FTP_HOME and permissions. Also, what is your FTP server, does it support Unix filenames or translate them?
You can probably try another machine use FTP to connect to the installation source and see if you can navigate inside the directories and get the files.

Where is the Oracle Application Server for Apex 3.2.1?

Hi, I feel ashamed asking this, but I want to know where to download the Application Server for Apex 3.2.1. Apex is installed in a DataBase 10gR1 and the O.S. where I will install the Application Server is RedHat
I think it is here
http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
But there is a lot of links and things to download and I don't even know if it will work because it is Release 3 and the DataBase is Release 1, but I tried downloading the "Oracle 10gR3 Companion (10.1.3.x) CD", but after running the installer in the disk1, I found that the Oracle HTTP Server that it would install does not include mod_plsql and I know I need it.
So, which one should I download, or where can I find it?
Thanks.

Hi,
Hi, I feel ashamed asking this, but I want to know where to download the Application Server for Apex 3.2.1. Apex is installed in a DataBase 10gR1 and the O.S. where I will install the Application Server is RedHatI think it is here
http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
But there is a lot of links and things to download and I don't even know if it will work because it is Release 3 and the DataBase is Release 1, but I tried downloading the "Oracle 10gR3 Companion (10.1.3.x) CD", but after running the installer in the disk1, I found that the Oracle HTTP Server that it would install does not include mod_plsql and I know I need it.
So, which one should I download, or where can I find it?>
Strictly speaking you do not need Application Server or OHS for running Apex, you have an option in ApexListener. If it is a small installation then stick to EPG that comes built-in.
Try downloading the Oracle HTTP Server from here . You will need to check the commercial aspects yourself as OHS is not a free software for Production environment, AFAIK.
Cheers,

Oracle Linux 6.2 installation

Hi,
I am new to the Linux world. Want to install Oracle Linux on my PC.
Downloaded the 4 parts (V29608-01, V29459-01, V29611-01 and V29612-01) of Oracle Linux Release 6 Update 2 Media Pack for x86_64 (64 bit) and put each part on a separate DVD.
Can you please help me with the steps to install from the download.
Thanks in Advance.
--Jag.

Can you please help me with the steps to install from the download.First, tell us what you want to do with Linux. Then tell us what kind of hardware you want to install on.
Next decide what kind of installation you want to do:
<ol>
<li>Replace that other operating system, the one with the blue-screen;
<li>Make a dual-boot system, capable of booting either Linux or that other O/S;
<li>Keep your current O/S and run Linux in a virtual machine.
</ol>

Database home page not opening in oracle linux 4 after installation?

I have just installed oracle 10g express edition R8 (32 bit) in oracle linux 4 (oem 4) which is running on vmware. After installation on going
application(start)->oracle 10g express edition ->Go To database home page. Database home page starts on konqureor and it shows
"An error occurred while loading *http://http//127.0.0.1:%httpport%/apex*:
Unknown host http "
All the other application including plsql is working right which comes with oracle 10g xe. But without Database home page i can't start doing plsql because i can not create any database without opening database home page.
I have also posted this question in yahoo answers(_http://answers.yahoo.com/question/index;_ylt=AjLqSLCkMZzaJgBv_igbiN7ty6IX;_ylv=3?qid=20120324013912AANOlL9_) but what answers has been provided i am not able to understand.
plz help i wanted to work on oracle database. I am trying it for so long. Thanks in advance
Edited by: 921562 on Mar 24, 2012 3:35 AM
Edited by: 921562 on Mar 24, 2012 3:35 AM

921562 wrote:
I have just installed oracle 10g express edition R8 (32 bit) in oracle linux 4 (oem 4) which is running on vmware. After installation on going
application(start)->oracle 10g express edition ->Go To database home page. Database home page starts on konqureor and it shows
"An error occurred while loading *http://http//127.0.0.1:%httpport%/apex*:
Unknown host http "
All the other application including plsql is working right which comes with oracle 10g xe. But without Database home page i can't start doing plsql because i can not create any database without opening database home page.
I have also posted this question in yahoo answers(_http://answers.yahoo.com/question/index;_ylt=AjLqSLCkMZzaJgBv_igbiN7ty6IX;_ylv=3?qid=20120324013912AANOlL9_) but what answers has been provided i am not able to understand.
plz help i wanted to work on oracle database. I am trying it for so long. Thanks in advance
Edited by: 921562 on Mar 24, 2012 3:35 AM
Edited by: 921562 on Mar 24, 2012 3:35 AMThis has nothing to do with Oracle. Do you have an understanding of how URL's are constructed? The leading characters, delimited by the colon (':') specify http protocol. The string between the first colon and the next (if exists) specifies the fully qualified name of the host, or the IP addess of the host. Take a look at what you have there: //http//127.0.0.1" I really don't think your host name is "//http//127.0.0.1". More like '//127.0.0.1"

Oracle Linux and Automatic Installation of Oracle Related Packages

G'day,
I recently decided to check out Oracle's Unbreakable Linux as I am/was thinking of switching to it for all my company's database deployments. What originally attracted me to Oracle Linux was that I though there would have been a kickstart, package or in the GUI install, a check box to install all of Oracle's dependencies.
When I installed it first, I manually selected a bunch of relevant packages, then installed any missing packages manually via a local YUM repository that I had made. Alas however, Oracle did not install correctly. So, I reinstalled, this time as a full install. Oracle then worked like a charm.
I also noticed, when editing /etc/sysctl.conf and /etc/securetty/limits.conf that these files had basically all ready been configured.
So, my question is, as I have had no luck using the search functionality here, is anyone aware of a kickstart argument, or an Oracle package that will install and in turn by way of dependencies, install all the necessary Oracle bits and pieces? Ideally, I would like to do this by way of kickstart as to automate as much of the process as possible.
If I can do this, then with some further testing, I will make the switch to Oracle's Linux for our Oracle deployments.
Cheers,
Conor

Yes, there is a great package called oracle-validated that is available that will pre-configured Oracle Enterprise Linux for installation using the Oracle Universal Installer. It ensures that things like sysctl.conf are all correct.
It should be available in the base download, so you can test it out. :)

Where is the Oracle XML Team ?

Hi...
Just wondering about where these guys from Oracle responsible for
the XML tools are...
Well I guessed there are the guys from ORacle responsible for the
tools... but maybe I'm wrong...
I'm asking this question cause I've posted some messages here
they were the few ones able to answer to...
And I never got any answer back...
Last example to this : it seemed there's a real problem with the
printStream() function...
And as quite nobody here is interested in the xdk for C I was
expecting an answer from the ORacle XML Team...
And I'm still waiting...
But maybe the Team isn't operating any longer...
Please tell me...
Thanks

The team is alive and kicking. Some of us are more experts in
the Java side of the XDK, so hopefully one of the C/C++ experts
will respond soon. Many of us are at Oracle OpenWorld this week,
so might be answering questions at night and between
presentations from the show floor.

Oracle Linux 6.4 installs, runs, and manual shutdown OK ... but restarts itself after 10 minutes or so

Hi Guys
Successfully installed Oracle Linux 6.4 operating system , which subsequently runs as expected.
When Oracle Linux 6.4 is shutdown using standard GUI system/shutdown ,
it does a clean shutdown and power-off as expected ....
UNTIL some 10 minutes or so later , when Oracle Linux 6.4 reboots all by itself from a fully powered-down state.
Likewise when Oracle Linux 6.4 is shutdown using standard command line " shutdown -h now" ,
it does a clean shutdown and power-off as expected ....
UNTIL some 10 minutes or so later , when Oracle Linux 6.4 reboots all by itself from a fully powered-down state.
Clearly it is NOT desirable to have the operating system able restart of it's own accord.
A manual shutdown is typically done for good reason , and the server should remain shutdown.
The previous version, ie Oracle Linux 6.3 did not exhibit this behavior.
When Oracle Linux 6.3 was shutdown, it stayed shutdown
Question
======
Does anyone know how to STOP Oracle Linux 6.4 from restarting itself after a successful shutdown ?
Thanks
Bruce

Does anyone know how to STOP Oracle Linux 6.4 from restarting itself after a successful shutdown ?
Assuming your network interface is eth0, execute "$ ethtool eth0", like below, and indicate what you get for the lines "Supports Wake-on" and "Wake-on.
lx04:/root $ ethtool eth0
Settings for eth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes: Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        MDI-X: Unknown
        Supports Wake-on: pg
        Wake-on: d
        Current message level: 0x0000003f (63)
                               drv probe link timer ifdown ifup
        Link detected: yes
Then check in your BIOS (usually under APM) for any enabled power-on settings associated with PCI or PCIe bus (your NIC will use one or the other).

How connect the oracle/Linux using ODBC

I want to connect the Oracle which install on Linux using Odbc, so my win98 machine can connect with the oracle.
But I don't know how to do ? May I install some Odbc driver in the Linux machine? and install odbc driver in my win98 machine?
my email: [email protected]

You may use this way:
1. Start on the server (Linux) Net*8 listener (lsnrctl start)
2. Install on the client (win98) Net*8 and configure it (Net8 Easy Configuration)
3. Install on the client (win98) ODBC drivers for ORACLE (by ORACLE or others) and configure it

Where are the Oracle Data Binding Frameworks for Oracle Objects?

Oracle offers a few different options for data-binding frameworks to Oracle relational data. Amongst them they include TopLink and the Oracle Application Development Framework (ADF)in JDeveloper 10G. J2EE also offers the EJB standard framework. Both of the Oracle data-binding frameworks appear to work well with relational data but fail misserably when one tries to work with a fully fledged Oracle Object-Relational schema. I have spend much time with ADF but have not been able to create successful bindings to Objects with nested complex objects (such as a 2-level nested object) or objects containing nested tables. TopLink will not even touch Object tables.
Have other people being more successful with this? Do we have to implement our own data binding framework? Does Oracle plan on improving these frameworks to fully support Oracle Objects?

TopLink Runtime supports both fully fledged OX mappings and nested complex objects. These mappings can be setup in the code.
TopLink ADF design time however currently does not have support for OX mappings.
Hope this helps,

Where is the oracle.prometric

i wrote the Oracle RAC 10g R2 exam in india hyderabad on the oracle.prometric web-center but while i am checking the web site to see my score i can not find the website maybe it's changed
with my regard

Read..
http://blogs.oracle.com/certification/2009/08/0134.html
Create a new web account in VUE/oracle . Register with your prometric ID.
If you want previous exam report.. feel free to contact
How can candidates get a copy of their Prometric score reports?
Copies of your score reports at Prometric will no longer be available after September 25, 2009, so if you >need a copy of your score report, you should request it from Prometric before that date. After September >25, 2009, you can request your exam score (not a full detailed score report) from >[email protected]
Reards
Azar
DBA
Edited by: Azar on Nov 22, 2009 1:26 AM

Where is the oracle linux 6.4 installation screenshots documentation ?.

Similar Messages

Maybe you are looking for