Where is the place for user feedback and beta testing for Playmemories Home and Online?

I have been a long time user of PMB and PH and want to get involved, I have extensive experience and I am very active with these products, where can I go, there are iussues I want to get to the bottom of and also updates I want to see implemented. Sean. 

Hi seanoz,
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

  • HT4009 Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

    Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

    You can try contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Sorry but i have a problem my IPAD has been stolen and i want help to know where is the place of it ? can i send the serial number or anything i want help to know the place of my IPAD and thanks  My name is :- Osama Rezk   I'm From :- Egypt

    Sorry but i have a problem my IPAD has been stolen and i want help to know where is the place of it ? can i send the serial number or anything i want help to know the place of my IPAD and thanks My name is :- Osama Rezk I'm From :- Egypt my icloud ID
    <Email Edited by Host>

    You will only be able to track your iPad if you have find my iPhone active and the iPad is connected to a network.
    Take a look at this link, http://support.apple.com/kb/PH2580

  • HT1349 where is the file sharing so you can have music for ringtones and txt messages please

    where is the file sharing so you can have music for your txt and ringtone please

    Not sure what you're asking.....what do you mean file sharing?

  • Where has the "Clean up" "Clean up by" option gone for organizing folders? I just upgraded to OS X Maverick today and noticed it was no longer a option when right clicking; also, it is grayed out in the view tab.

    Where has the "Clean up" "Clean up by" option gone for organizing folders? I just upgraded to OS X Maverick today and noticed it was no longer a option when right clicking; also, it is grayed out in the view tab.

    Hi i had this problem myself what you need to do is..
    right click and press 'show view options'
    then go to the arrange by and sort by options near the top and change them both to none
    click save as defult at the bottom
    then when you right click the clean up by options will now be there
    hope this helps

  • Where on the Adobe website can I find a link for a free PDF to text converter?

    Where on the Adobe website can I find a link for a free PDF to text converter?

    I am trying to find a link to a free Adobe 'PDF to text' converter that I can refer users of my website to.
    This is for users who's screen reader software is not compatible with Adobe Reader.
    Up until last week I was refering my users to the following webpage, but now that link no longer works as the tool must have been moved.  I am just trying to find the new location:
    http://www.adobe.com/products/acrobat/access_onlinetools.html
    Can anyone advise?
    Thanks

  • I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to insta

    I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to install it on 2 different computers. PS they are both PC computers.

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

  • I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

    I was an apple beta tester for iOS7 and now my iPhone 5 shut down, it's unresponsive it gets recognized by iTunes when plugged into the computer but that's it. Since I was a beta tester is there any way to fix my iPhone??

    Are you still running iOS 7 bet?. If so go to the private developer section for help. We cannot help you here with beta software.

  • Where is the custom stamp location in Acrobat 9 Pro for Win Vista

    Where is the custom stamp location in Acrobat 9 Pro for Win Vista?

    See this thread to find out how to determine the location:
    http://acrobatusers.com/forums/aucbb/viewtopic.php?id=17521

  • [svn:osmf:] 10437: Add support and unit tests for parsing VAST documents ( inline or wrapper).

    Revision: 10437
    Author:   [email protected]
    Date:     2009-09-20 13:31:16 -0700 (Sun, 20 Sep 2009)
    Log Message:
    Add support and unit tests for parsing VAST documents (inline or wrapper).   All elements are covered with the exception of Video.
    Modified Paths:
        osmf/trunk/libs/VAST/.flexLibProperties
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTAdPackageBase.as
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTDocument.as
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTInlineAd.as
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTWrapperAd.as
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/parser/VASTParser.as
        osmf/trunk/libs/VASTTest/org/openvideoplayer/vast/parser/TestVASTParser.as
    Added Paths:
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTAdBase.as
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTCompanionAd.as
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTNonLinearAd.as
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTTrackingEvent.as
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTTrackingEventType.as
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTUrl.as
        osmf/trunk/libs/VAST/org/openvideoplayer/vast/model/VASTVideoClick.as

    Your problem sounds similar to this one, except that they're using software raid rather than just pure LVM. If you're using an initrd, you may not have the appropriate modules installed. If you're not using an initrd, then the kernel probably needs LVM support compiled in (not as a module) and could be solved by fixing that. I have never used the ck-patchset, but this should give you an additional data point.
    Also comment=systemd.automount will be deprecated soon as I understand it; if you have a need for automounting, x-systemd.automount should be used instead.

  • Performance and Load testing for Agentry applications in SMP2.3

    Hello Experts,
    We have a requirement to carry out the Performance and Load testing for our SAP Work Manager application (SMP2.3).
    Please guide me if ATE (Agentry Test environment) /  Jmeter / or any other testing tool can be utilized for the same.
    Would be great if you could provide me the steps / references for the same.
    Thanks,
    Abhishek

    Hi Abhishek,
    Please refer this document Agentry - Assets for Admins & Architects. It has very good content which explains about performance testing and performance tuning.
    Rgrds,
    Jitendra

  • [svn] 2540: add bugs folder and asc test for bug #ASC-2839

    Revision: 2540
    Author: [email protected]
    Date: 2008-07-21 10:38:41 -0700 (Mon, 21 Jul 2008)
    Log Message:
    add bugs folder and asc test for bug #ASC-2839
    Ticket Links:
    http://bugs.adobe.com/jira/browse/ASC-2839
    Added Paths:
    flex/sdk/trunk/modules/asc/test/bugs/
    flex/sdk/trunk/modules/asc/test/bugs/ASC-2839.as

  • Playmemories home and online software support

    I have talked for 2hours today. with many phone numbers 800-222-7669...877-971-7669...855-999-7669 of which absolutly no one could help.  I need a real software support tech not gonna play phone merry go round anymore.
    I have playmemories home and playmemories online, of which the software is one in the same.   The play memories home has a tab on the tool bar called paly memories online, drop down menu playmemores online settings,,    ALL SYNC function is checked, however none of my data is being uploaded to the cloud when I was under the impression that it was.  I only found out by downloading my ps4 app for playmemories online and found no pictures on the cloud.  I have 10g easy.   The software states per batum "turn on all sync to automatically upload photos from your computer" I am signed in to my account.  I hope one of you have the knowledge to get me to the correct person that can actually be contacted or that can contact me so I can get this resolved.  The support on the phone was horrable today.  I have a ref. # that you can query if you would like though I do not think it will further the progression of solving this issue.  bottom line,  I need someone who knows what there doing in this area.  ref # e60877743

    Hi seanoz,
    For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • How does someone become a beta tester for Zen Xtra Firmware

    I have a lot of experience in Hardware/Software integration and am interested in becoming a beta tester for Zen Xtra firmware. Is there someone that a mod could put me in touch with to pursue this oppertunity?
    Thx in Advance
    Dustin

    There is a beta programme, but I'm not sure how you apply to be a tester.
    At a guess Creative pick people they know, or if they need to recruit they'll post on the forum.

  • [SOLVED]Where is the place to set program path for root in arch?

    The situation is that I use qingy (set up according to wiki) as login manager and kde as desktop. When I use tty6 (agetty) to login (how comes that I cannot login as root, have to login as user and then su) /usr/sbin is in the path for root, but in kde when I su in konsole it is not. That caused me some headache with the latest kernel upgrade, since in kde the kernel will not upgrade properly, I have to do it on tty6. what is the proper way to set paths in arch? I looked at /root/.bashrc and that is almost empty. What obvious things am I missing? Has qingy to do with that problems? Any docs on that for arch? Besides firefox doesn't see any installed plugins, opera does. Plain Centrino laptop here.
    Thanks, signor_rossi
    Last edited by signor_rossi (2007-08-24 15:12:31)

    Thanks for the answers. Investigated a little more and it seems it is really qingy what messes things up. Deactivated it and used "startxfce4" to start xfce and "startx" with "exec startkde" in my  .xinitrc to start kde (once I figured out that in Arch "startkde" on command prompt alone does not work ) and voila, the path weirdness is gone in both DEs. Will look again into qingy when I have more time, since it is really nice when using different X setups (laptop on the go or laptop on docking with second display), like the eye candy. I guess I will stick to console now and simply use bash aliases for that purpose.
    Thanks, signor_rossi.

Maybe you are looking for