Where is the "Preview Cache" options from LR1.0 in LR1.1?

I have seen a significant slow down since installing 1.1... It can take 30 sec or more to get a sharp preview or image. One of the preferences in 1.0 was under File Management (which it seems has been renamed "File Handling") was Preview Cache and it allowed you to change the size and quality of the previews as well as discard 1:1 previews after a set period of time.
I'm thinking that this setting could help with the performance issues but I can't find it. Does anyone know if it is still around??

File Handling is now set on a per catalog rather than global basis. So, File>Catalog Settings (Cmd+Opt+, or Ctrl+Alt+,) is where you'll find it.

Similar Messages

  • Where did the Empty Cache option go?

    I recently did a software update for Safari and the Empty Cache option under Safari in the tool bar is no longer there. I use this ALL the time, any idea where it is?
    Thanks!

    Apparently it's been omitted from the latest Safari update however you can enable the Develop menu and clear the cache from there.
    From your Safari menu bar top of your screen click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now from the menu bar again click Develop > Empty Caches

  • Where are the reconstruct mode options from liquify in cs6?? please help

    I m in advanced mode but can only see reconstruction as original? Thanx

    Hi jworthin
    Thank you very much for your answer which sounds like a disaster to me, but it looks like there's still hopes ; )
    I think you did an amazing job on cs6; I only have it since a couple of days but I really love it
    So far the new saving method and autorecover is priceless.
    I m not sure about propagation mode (mine is in french and that's how it's written in cs4) but I guess it's the smooth mode which i always used to partially correct some areas in order to avoid the pixel deplacement and stretch that makes your morphing so not pro...
    The current reconstruct tool is only based on history, so let's say you want to make a girl pregnant and displace a lot her belly, then before I was using the reconstruct tool in smooth mode and would brush on the displaced belly to avoid those totally stretched pixels; now if I pass with current reconstruct what will appear is a hole whith the background or orignal belly...not sure i m very good at explanations and english is not my language...
    Anyways I run a retouching studio and wanted to test cs6 before getting new licences; now the problem is I love it but can't use the liquify tool for a professionnal work without this reconstruct features so I really hope it will come back in an upgrade pleassssse !!!
    Also I just found out something weird: when pressing F for full screen, color changes like it would be a different profile; the correct color being only shown in standard mode ??
    This happens with a workstation of 3 screens based on windows7 64 pro but there's no problem with a mac on 1 screen ?
    Thank you so much for your help
    Best
    Edit: concerning the full screen problem, I ve found out what's wrong or looks like a bug, it only happens if "graphic card acceleration" is clicked...

  • Where do I find the enable cache option in CS5?

    Where do I find the enable cache option in CS5?

    First, define the site.  Go to Site > Manage Sites.  Enter the Local site folder where you want to keep your files. 
    Under servers, add the  FTP log-in details for your remote site as provided to you by your web host.
    Root directory is where your hosting provider told you to upload the publicly accessible files.  Commonly used root folders include public_html, www or htdocs but this varies by host.  If unsure, contact your hosting provider for details.
    When you're done defining your site, hit TEST to verify connection and then SAVE your settings.
    In the DW Files Panel (F8) click on Remote Server and hit the green Down Arrow to GET files from remote site to your local site folder.
    Nancy O.

  • LR can't read from the preview cache - how correct?

    After a harddish crash I can't open the Catalog. I get a message that the program can't read from the preview cache. Can I restore the preview cache sommehow? Can I resotre the preview cache from a backup?
    Best Regards Håkan Hall

    Error when starting program

  • How do I change the preview cache disk?

    I keep seeing statements such as "there is nothing to stop
    you from locating the preview cache on another disk". Um.. there is a problem.
    I find no option to do it anywhere. In catalog settings it only "Shows" the location and does not allow changing it.  Am I missing something? I have looked and looked and the process is described nowhere. It is very frustrating because I can find these things on my own quite readily and in LR its totally buried if its possible at all.
    Also;
    How can I change the default camera calibration from the ACR 4.4 to Adobe standard ?  The first thing I have to do after every import is go back and sync to a different camera profile.
    Thanks in advance for any help

    In order that you can change the camera default profile you must be in the Develop module then change the profile to Adobe Standard. Next, choose Default Settings from Develop module. When the dialog appears you should click on Update to Current Settings...
    It's not possible to change the location of the library preview cache because it must be in the same folder as the catalog. However, changing the Camera Raw preview cache (used by Develop module) location is done through Preferences. The following screen shot shows you where to make the change.

  • Where is the bulleted Paragraph option in ID CS5?

    I cannot find the bulleted paragraphs option in CS5! What am I missing?
    The top image is the customization panel in CS5. The second image is from CS4.  Where is the bulleted Paragraphs option in CS5? HELP
    –Steve

    Yes. It is not where it should be. That is why I was looking in the customization window to see if it was turned off. Here is a snapshotof my CS5 toolbar.
    Thanks for your reply Scott.

  • I am getting an error when reading the preview cache and the program shuts down.

    I had to reload Lightroom on a new computer and after I did that it gives me an error when reading from its preview cache and then it shuts the program down.  How can I fix this problem?

    Delete the preview cache ... it is a folder whose name ends with Previews.LRDATA in the same folder as your catalog file.

  • HT5275 Safari 6.0 on Mac OSX Lion - The 'Empty Cache" option not visible in the File pull-down menu

    Booted up Safari today and the "Empty Cache option is no longer availabe in the Safari pull down menu.  Any suggestions?

    Clearing History will empty the cache now but it will also clear your favicons. You can clear cache only by going to Safari>Preferences > Advanced and select Show develop menu in the menu bar. There is an option to clear caches from there.

  • Where has the preview panel gone is Bridge CS5?

    Today when I opened up Bridge, the preview panel on the right hand side has disappeared. It shows as being selected when I go to the Window Menu but it isn't there. The scroll bar is also missing so I can't view all of the thumbnails. Does anyone have any ideas about why this has happened and how I can return it to it's normal format? Thanks, Michelle.

    Fantastic. Thank you, much appreciated
    Date: Mon, 16 May 2011 02:22:18 -0600
    From: [email protected]
    To: [email protected]
    Subject: Where has the preview panel gone is Bridge CS5?
    No, but you can choose Reset Workspace from the workspace menu to get it back to normal.
    >

  • I receive an error message regarding the preview cache.

    Upon LR startup I receive an error message regarding an inability to read from the preview cache. I have deleted the preview file from the Previews.lrdata folder as recommended, tried the alternate start-up in windows explorer and still receive the preview cache reading error message. Do you have any other suggestions?

    I have deleted the preview file from the Previews.lrdata folder as recommended
    This doesn't sound right.
    You want to delete the entire folder whose name ends with Previews.lrdata, and not some "preview file" within Previews.lrdata (and I don't really know what you mean by "preview file")

  • Where does the default route come from ?

    Dear All 
    As we know, the edge router in client side gets default route from ISP' edge router. Where does the default route come from in ISP? If the ISP edge router has full route table, it produces there. If not, it comes from its upstream router until full routes table(only BGP). Please correct me if I am wrong. Thank you. 

    Hello.
    While establishing BGP with ISP, there are three options for a client:
    > Default route (used in general) - client router forwards every request (for destination route) to ISP router.
    > Full route - ISP router's complete routing table would be received and maintained in client router.
    > Partial route - Only specific route would be received from ISP (Head office - Branch office scenario)
    ISP generate default route from their peering router that should have full routing table or knowledge of the router having it. A local ISP may generate default to their client and have one received from their upstream or global / larger ISP. Hope this helps.

  • Where's the blurred border option in Keynote 6.2?

    Where's the blurred border option in Keynote 6.2?

    There isn't one.
    The options available are found in:
    Inspector > Style > Border;     in the drop down menu select: Line
    The inspector is the side panel on the right hand side
    Choose a border from the drop down menu:

  • I am missing the Preview Builds option...

    My Windows 10 installations are all missing the preview builds option and the build versions are not updating. Do I have a group policy setting in the way?

    That seems actually like good design from Microsoft. I don't want a non-admin user to have any way of upgrading their PC - that should be solely reserved for admins.  And it's not like the option even appears for the user, so they won't know what
    they're missing.
    In the Modern UI, there's no way to elevate (I believe that's the word you're looking for) user's rights - you either have it or you don't.  So all one can do is show what you can access, and hide the rest.   

  • Where is the random play option in the new version?

    Where is the random play option? I want to play all my music through random but you can't seem to make that choice in this new itunes. Anybody figure it out?

    Could it be Controls > Shuffle?

Maybe you are looking for

  • Change Request demanded while creating a Sales Order

    Dear All, I am creating a Sales Order. The solution is using user exits to communicate between SD and TEM. Whenever we create a Sales Order its corresponding sales order and line item is updated in TEM table HRVPAD25. While saving the Sales Order, it

  • IMovie trouble shooting list (prel.)

    Hi Anyone that can add to this list of what to do - test when in trouble ? When iMovie doesn't work as intended this can be due to a lot of reasons • iMovie Pref files got corrupted • Creating a new User-Account and log into this - forces iMovie to c

  • FI -HR

    Dear All How can we get all the amounts which are generated in the HR Pay Roll  to vendor (Employee treated as vendor), wehe we have to integrate to get these... How much amount will be transfer regarding payment (Salary) every month will be shown in

  • Game issues

    Obviously this is not as serious as issues involving apps need for work, but since installing SL and upgrading to 10.6.1 I have had issues on a few online game sites -- certain things not showing up on the screen although the actions are still happen

  • Seperate document for each check encashed in FCHR

    Hi, I cleared around 5 checks on a particular day(all in one time) in FHCR and posted the document.  The document amount posted with one lumsum amount instead of cheque wise.  Is it possible to post each cheque as one document, eventhough if i encash