Where is the Print Settings Dialog?

Hello everyone,
I was trying to print sheet music from my Sibelius application. It would not print the final bar. I changed the black ink on my Canon i850 and updated the driver. Still the final bar would not print.
I posted my issue on the Sibelius discussion site and was told to open the File>Print dialog, go to the Print Settings dialog, then set "substitute resolution" to 300, if I am using Mac OS 10.4.
I am using Mac OS 10.4.6. I tried to follow the instructions but I couldn't because I could not find a Print Settings dialog.
How can I find 'Substitute resolution' in my computer?

Hi there,
When you click File you should have 'Page Setup' and 'Print' as menu options.
If you select 'Print' you will see the print dialog window. If you do not see a menu that is defaulted to 'Copies & Pages', then the application may have what is called a Simplified Print dialog, similar to what you get with Preview. But you should have an option to select Advanced, which will open the normal print window. Here you should be able to select your resolution, depending on which driver you are using for the i850.
The other thing I would check is File > Page Setup. If the sheet is set to A4 but your printed page is set to Letter, then you can loose about 20mm (which is close to an inch) from the bottom of the print (FYI - A4 is 297mm long while Letter is 279mm).
Regards,
Paul

Similar Messages

I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even with "pr

I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred

Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Where is the Printer Preferences Dialog?

I'm running PSE 6 for Mac on an iMac using Leopard. Printer is Canon iP6600D. After calibrating the monitor (using Apple's program under System Preferences), I opened a jpg on my desktop and made a print, and it matches the monitor fairly closely. Then I decided to open the same jpg inside PSE and print from there. Then it asked me under color management/color handling whether PSE or the printer manages the colors (or no color management). Depending on the answer, it says I need to disable or enable color management in the Printer Preferences Dialog. I have two questions:
1) Where can I find the Printer Preferences Dialog?
2) Is it better to let PSE or the Printer handle the color management?
I actually have a third question (sorry). When I make prints from our local Walgreens or WalMart, the prints seem way too dark and saturated (WalMart) or has a bluish/purple-ish cast (Walgreens). Maybe their printers are not calibrated like they're supposed to be??

Thanks. I used PSE to produce two jpgs of the same image, one with the 'standard' monitor calibration (gamma = 1.8), and the other using a calibration with gamma = 2.2. Images are sRGB, and I used the 'no color management' setting in PSE. I made prints on my Canon ip6600D, and they matched the monitor pretty closely for the respective profiles. The print made with the gamma 2.2 calibration came out lighter than the gamma 1.8 calibration, which was expected. So at this point it looks like my monitor and printer are working okay.
However, I just got back from Walmart, and these same two prints are way too dark, and they are the same exposure (one should be lighter). Does their machine (Fuji Frontier I believe) automatically optimize the images? If so, that is not good. What do I do now? Do I have to use a printer profile that matches their machine? My prints looks good (according to my monitor and printer), but I would like to make prints from Walmart or Walgreens if I need to print out a large quantity (saves time, money, ink and paper cost). Also, I want to send a cd to friends so they can make prints, but at this rate, it is not going to work.

Where are the printer settings?

I note that this has been asked before but apparently never answered. The printer dialog box in OS 10.4.8 no longer includes a pop up menu for printer settings. As a result I cannot use Epson's Print CD, which worked fine on OS 10.3.9 How can one specify print quality, etc?

That's my point - there is no "printer settings" in the dialog box. Under "copies and pages" etc, there is an item for "printer qualities" which I guess is meant to substitute for the settings, but there is no option which allows me to tell the printer that I'm printing on a CD, and the printer simply won't respond to the "print" instruction.

Can't open Print Settings dialog

All of the sudden I cannot open the print settings dialog from the print window in Aperture. Every time I click the button, I get this in console:
3/22/08 3:16:22 PM Aperture[574] * Assertion failure in -[RedRock _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:], /SourceCache/AppKit/AppKit-949.27/AppKit.subproj/NSApplication.m:2998
3/22/08 3:16:22 PM Aperture[574] Main Thread Exception in Aperture: Modal session requires modal window
Backtrace:
0x0007043d (in Aperture)
0x93fa7eb7: +[NSException exceptionWithName:reason:userInfo:] (in CoreFoundation)
0x93fa8023: +[NSException raise:format:arguments:] (in CoreFoundation)
0x94d95044: -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] (in Foundation)
0x9149fe20: -[NSApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:] (in AppKit)
0x009609ec (in ProKit)
0x00362b6d (in Aperture)
0x000a08c4 (in Aperture)
0x91471e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x91471d94: -[NSControl sendAction:to:] (in AppKit)
0x91471c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x91471273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x91470ac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x91470380: -[NSControl mouseDown:] (in AppKit)
0x9146eac3: -[NSWindow sendEvent:] (in AppKit)
0x00982c3e (in ProKit)
0x9143b714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x915dcf43: -[NSApplication _realDoModalLoop:peek:] (in AppKit)
0x915d7657: -[NSApplication runModalForWindow:] (in AppKit)
0x001bc7bc (in Aperture)
0x0009ec21 (in Aperture)
0x001288e4 (in Aperture)
0x91471e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x91471d94: -[NSControl sendAction:to:] (in AppKit)
0x91471c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x91471273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x91470ac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x91470380: -[NSControl mouseDown:] (in AppKit)
0x9146eac3: -[NSWindow sendEvent:] (in AppKit)
0x00983eba (in ProKit)
0x9143b714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x913990f9: -[NSApplication run] (in AppKit)
0x00960e5a (in ProKit)
0x00003872 (in Aperture)
anybody else with this problem?
(could this be related to this??? http://discussions.apple.com/thread.jspa?messageID=6559834&#6559834)

Nothing new to add other than I am getting the identical behavior. The output on my console appears to match to OP's. Any help would be appreciated. This is on Aperture 2.0.1 with all the security and other updates applied.
3/24/08 10:00:58 AM Aperture[29084] * Assertion failure in -[RedRock _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:], /SourceCache/AppKit/AppKit-949.27/AppKit.subproj/NSApplication.m:2998
3/24/08 10:00:58 AM Aperture[29084] Main Thread Exception in Aperture: Modal session requires modal window
Backtrace:
0x0007043d (in Aperture)
0x912e1eb7: +[NSException exceptionWithName:reason:userInfo:] (in CoreFoundation)
0x912e2023: +[NSException raise:format:arguments:] (in CoreFoundation)
0x965f6044: -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] (in Foundation)
0x9337ee20: -[NSApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:] (in AppKit)
0x009609ec (in ProKit)
0x00362b6d (in Aperture)
0x000a08c4 (in Aperture)
0x93350e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x93350d94: -[NSControl sendAction:to:] (in AppKit)
0x93350c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x93350273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x9334fac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x9334f380: -[NSControl mouseDown:] (in AppKit)
0x9334dac3: -[NSWindow sendEvent:] (in AppKit)
0x00982c3e (in ProKit)
0x9331a714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x934bbf43: -[NSApplication _realDoModalLoop:peek:] (in AppKit)
0x934b6657: -[NSApplication runModalForWindow:] (in AppKit)
0x001bc7bc (in Aperture)
0x0009e8c1 (in Aperture)
0x0004415f (in Aperture)
0x93350e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x933ff7cc: -[NSMenu performActionForItemAtIndex:] (in AppKit)
0x933ff4d1: -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] (in AppKit)
0x933dc3ae: AppKitMenuEventHandler (in AppKit)
0x90ef4fc3: DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) (in HIToolbox)
0x90ef43fd: SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) (in HIToolbox)
0x90f10e0e: SendEventToEventTarget (in HIToolbox)
0x90f4586d: SendHICommandEvent(unsigned long, HICommand const*, unsigned long, unsigned long, unsigned char, OpaqueEventTargetRef*, OpaqueEventTargetRef*, OpaqueEventRef**) (in HIToolbox)
0x90f6bfbf: SendMenuCommandWithContextAndModifiers (in HIToolbox)
0x90f6bf7c: SendMenuItemSelectedEvent (in HIToolbox)
0x90f6be7e: FinishMenuSelection(MenuData*, MenuData*, MenuResult*, MenuResult*, unsigned long, unsigned long, unsigned long, unsigned char) (in HIToolbox)
0x90f48b1e: MenuSelectCore(MenuData*, Point, double, unsigned long, OpaqueMenuRef**, unsigned short*) (in HIToolbox)
0x90f48509: _HandleMenuSelection2 (in HIToolbox)
0x90f4837d: _HandleMenuSelection (in HIToolbox)
0x93318f77: _NSHandleCarbonMenuEvent (in AppKit)
0x9327fc72: _DPSNextEvent (in AppKit)
0x9327f08e: -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] (in AppKit)
0x0036228e (in Aperture)
0x932780c5: -[NSApplication run] (in AppKit)
0x00960e5a (in ProKit)
0x00003872 (in Aperture)
0x00003799 (in Aperture)

TS3147 Where are all the print settings for my HP Officejet 5510 in Mac OS X 10.8.2? I can't find Normal, just Draft and Best.

Where are all the print settings for my HP Officejet 5510 in Mac OS X 10.8.2?? I only have Fast, Fast B & W, and Best. I want Normal so that it looks good but doesn't print so slowly. Help.

Hi,
Change the print settings manually by clicking the lowest drop-down within the print dialog (e.g. the application name, Copies & Pages within MSOffice.
Select Type/Quality and set the print quality as Normal.
You may seve the settings as a Preset from the Presets drop-down menu.
Shlomi

Disableing the printer color management in the printer settings box

Hello
I am printing on a Epsonstylus r1800 printer using windows 8.. Printer has new drivers v6.55 The Adobe print setup reminds me to disable the printer color management in the print settings box. I can't find where to do this in the print settings box. Resulting in color that is way off. Any thoughts?

Must be done in the printer driver.
This is an example for the Epson 3880
First click on Print settings and in the dialog that opens look for Color Adjustment but that differs with the printer model...

HP Officejet Pro 8600 Wireless - Where are the printing shortcuts?????

HP Officejet Pro 8600 Wireless Printer
Windows 7
Where are the printing shortcuts?????
I just replaced a canon printer that died that had the concept of PROFILES, so that I could setup a PROFILE for each type of printing, i.e. 4X6 photos/documents/5X7 photos. So it was easy for our family to print, they would pick each setting.
Now with latest driver for 8600 there are NO way to save a set of settings for a printer. I have seen some old discussions on this but I just can't believe HP doesn't have this type of functionality in their drivers. I don't need the ePrint and all the other bogus stuff installed with the 8600 driver, but I DO NEED the ability to save different sets of printing options so I don't have to remember, borderless or not, landscape or not, etc and keep wasting photo paper/ink/regular paper with incorrect options.
Here is another posting with similar points -> Customers are NOT getting full print functionality. We don't care about the extra software, it is minimal. Full functionality includes the ability to create profiles for different printing situations so that the user can easily choose that profile (and therefore all the myriad settings for that profile). What HP has done is give us ONE profile, essentially, and every time you want to do something different, you have to change that ONE profile. How is that helping?
As I said, if I want to switch from a normal printing job (e-mail, web page, etc.) which uses my ONE setting, and then want to print a 4x6 photo, I have to remember to change at least 6 different settings. With the shortcut, I would select my "borderless photo" shortcut, and it would automatically switch paper trays, size, color, quality, you name it. Now you force me to change that each and every time.
If someone can explain why this is considered full functionality I would be extremely grateful.

Hello,
I am sorry you are having trouble with your print experience.
I am going to make some assumptions here, which could be wrong in your case, but might help others. Since you mention printing from Windows7 and ePrint in the same thread, can I assume you are trying to print using the HP ePrint driver for windows (www.hp.com/go/eprintsoftware) ? The ePrint driver also comes preinstalled on all HP laptops and pcs now, so maybe you made a recent pc purchase and therefore have the ePrint driver installed?
The goal of the ePrint windows driver currently has a lot less to do with providing the hundreds of print features and settings that the full featured, product specific print drivers provide. The goal is to enable customers to be able to print to any recent or new HP printer through a number of different connection paths from a single installed print driver / print queue. Once the ePrint driver is installed, printing with that driver will dynamically find direct network printers, cloud enabled printers, public print locations, direct wireless printers, etc., and create the correct print format depending on the print path taken. If the printer is ePrint cloud enabled and has a good internet connection, the printer and the pc do not have to be in the same location. For example, you can print from home to your printer at work. You can send photos of the kids to your mom's printer in another state, etc. The ePrint solution is also good for the traveling worker who just wants to send the occasional print job to the nearest network or wireless direct printer without having to find and install another print driver for each new printer. One driver, one queue and you can print to any recent or new HP printer.
The ePrint driver has a few important print settings that customers may want to use (copies, duplex, grayscale, etc). More may be added over time depending on demand.
BTW, because the ePrint driver does not have a ton of print settings to handle, the rendering of print jobs is as simple and efficient as possible and should not bog down your pc.
If you want all the bells and whistles in the print driver experience and just want to print to a single printer you can download and install the product specific print driver from hp.com
I hope that helps out a few people who may be wondering what the purpose of ePrint is!!
Good luck.
I am an HP employee, but these are my own thoughts and suggestions

Where did the print setting "Rewrap message to fit" go in Mail 7?

Where did the print setting "Rewrap message to fit" go in Mail 7?
All text prints too small. Settings for font size haven't changed and the emails print out much smaller than the view settings.
I don't see the options for "Rewrap message to fit" or "Keep fonts the same size".
Suggestions?

I have the same problem. Text and the info with the "To" header all prints very small. I also cannot find the controls described. Just updated to Mavericks, never had problem before this. Same printer, and problem also occurs on another different model printer I tried for a test.
Mail ver 7.2
OSX 10.9.2
Please help !

RH8: Where is the Style Mapping Dialog?

ok, I've looked long enough. Where is the Style Mapping dialog?

Hi there
Perhaps try clicking File > Project Settings > Import tab and clicking the Edit... button.
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

How can you access the printer settings in CS5 when using Epson 4900?

How can you access the printer settings when using Epson 4900 with CS5 12.1 x 64

Open the print dialog box, click "print settings".

Printer Settings dialog missing when printing to another Mac with Bonjour

I want Photoshop to manage my color settings rather than my Epson 4800 or Epson SPRX 580 printers, so in the print dialog box I select the "Printer Color Management" tab and set color adjustments to the OFF position. This works fine as long as the printer is connected directly to my MacBook or my MacBook Pro. But if I try to send a job on my MacBook Pro via bonjour to either of the printers when it is connected to my MacBook, the print dialog is missing the choices of "Printer Color Management", "Printer Settings", etc.
All that is available are things like "Layout, Cover Page, Scheduler, Summary." The "Printer Settings, Color Management" options only show up on either computer when connected directly to the printer.
Is there a way to get those other choices (Printer Settings, Color Management) when printing over a bonjour network?
I'm on Mac OS 10.5.6 on the MacBook Pro and Mac OS 10.4.10 on the MacBook. I have downloaded all the driver updates from Epson and deleted and added the printers again with the same result.

HP must have release a driver update because we no longer encounter the problem.

I dont know how to bring up the printer settings dialogue box

i dont know how to bring up the printer settings dialogue box with my macbook pro in order to adjust the lightness/darkness of my prints. my friend has the same model printer as me and can adjust the lightness of his prints using a pc but the same dialogue box doesnt appear with my mac.the printer is epson office b1100

You can do this from the print dialog box. For instance, in Safari (which I guess you're looking at now) drop down the 'File' menu and select 'Print'. This brings up the print dialog box. Underneath the basic settings you'll see another menu, it currently says 'Safari', but if you drop that down you get all the options for adjusting colour, paper handling, etc...

Where is the print button on my all in one

where is the print button on my all in one pc i cant see it at the top of the page

Hi,
Hundreds of AIO models are out there, what is the model of your printer ? Where do you print from: from its card reader of from a computer ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

The Where in the save as dialog box

The Where in the save as dialog box is frustratingly limiting is there a way to change this so I can browse to the folder I want?

I recommend you get Default Folder. I've considered it a must have utility for my systems since OS9 Classic days. It greatly helps in navigation for the ever deficient file dialogs in OSX (and OS9).

Where is the Print Settings Dialog?

Similar Messages

Maybe you are looking for