Where is the property FP.Origin
Hi all
Does anyone know where I can find the property Front Panel.Origin? If I open a vi created in LV7.0 it is called Front Panel Windowrigin, but in LV8.0 I can't find it.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Tst is correct. It looks like you can get it from the Pane property like this
David
Message Edited by David Crawford on 03-08-2006 08:27 AM
Attachments:
Pane Origin.jpg 3 KB
Similar Messages
-
When I import files (copy from jpeg or copy as DNG from raw, where is the full size original stored?
I have the photos go here file, does LR5 put the untouched original there? Do I need my own file for originals and if so, how does LR5 know where to find the full size original? I have everything working but don't understand where my untouched originals go after import. Say I import off my card to My Pictures/Lightroom Catalog/ Photos go here ..... are my originals there? What if I erase my card now, do I only have partial size negatives basically? I don't understand why LR5 didnt put in an originals do here file that imports the full photo to a stock folder. I am so confused I am about ready to throw out LR5. I even bought your instructional DVD and it doesnt make where the original files location clear, it just repeats that LT5 does NOT import the original, just thumbnail and instructions, where is the program getting the photo when I double click to open it , or am I only seeing a lower resolution version of the photo and the full res is now gone because I formatted the card?
When you import photos, you can choose "Copy" or "Move" or "Copy as DNG", and then select a destination folder on your hard disk. This happens on the right hand side of the Import dialog box. So your original files go to this destination folder.
Alternatively, if your photos are already on your hard disk, you can import by choosing "Add" and the original photos remain in the existing location.
If you're not sure where the photos are, open Lightroom, go to the Library Module, and on the right hand side is the Metadata Panel. Set the dropdown to "Default", and it will show you where your photos are stored. Alternatively, you can right-click on any photo and select "Show In Finder"/"Show in Explorer" and Lightroom will take you to the exact folder where the photo is located.
So, bottom line, you are in total control of where the originals go, and if your forgot where you put them, or made a mistake, you can always find out where they are.
What if I erase my card now, do I only have partial size negatives basically?
If your import was successful, then the photos are now stored on your hard disk. So you have the full size original for Lightroom to work with.
it just repeats that LT5 does NOT import the original, just thumbnail and instructions
Lightroom does import the original, which means, in Lightroom jargon, that it records the location and metadata about the photo; in other words, Lightroom knows where the photo is, but Lightroom NEVER contains your photo, your photo is ALWAYS stored on the hard disk.
Because Lightroom now knows where your photo is located, it is important that you not manage your photos (move, edit, rename, delete) outside of Lightroom. Photo managements tasks now must be done in Lightroom. (There are advanced methods that let you manage your photos outside of Lightroom, but these would be NOT RECOMMENDED for beginners) -
Where is the "place of origin" data field in Switzerland HR?
Hi there, please can someone tell me in which infotype in SAP HR the "place of origin" field is stored for Switzerland - this is different to country of birth in IT2, this is related to which Canton your family originates from.
Thanks in advance for your help
Kind regards, TanyaHi,
Infotype 0038 (Fiscal Data CH) - field PA0038-KANTO.
Hope this helps.
Donnie -
Where is the Property Editor - Portal_server ?
Hello:
I'm following this <a href="http://help.sap.com/saphelp_nw04/helpdata/en/c4/fd584289e59041e10000000a1550b0/frameset.htm">documentation</a> and I can't find the Property Editor - Portal_server.
Thanks.
RLS.Thanks for answer Ramakrishna Prasad.
Yes, of course. My mistake on putting the general link of the documentation.
Under the title <a href="http://help.sap.com/saphelp_nw04/helpdata/en/2c/00584289e59041e10000000a1550b0/content.htm">"Create a Web Dynpro Iview"</a> says:
"5. In Step 4 of the Web Dynpro iView Wizard you have to specify the Web Dynpro-specific parameters.
a. System"
(and is show the "Property Editor - Portal_server " screen).
Thanks a lot.
RLS -
I just updated iOS on my iPhone 5.
What a shock!! Where is the premium look and feel I bought my iPhone for?
If I wanted the lokale feel of iOS 7.0 I would have bought a much cheeper taiwanese smartphone.
Please let me know how I can return to the original look and feel of the iPhone surface I bought my phone for.You had plenty of time to look at screenshots on the internet and read various blog posts about iOS 7.
-
i bought my iphone from faisalabad pakistan i dont know where is the original buyers of it now due to sm reason i had to make its software new and now its wanting id and password and i dnt knw that m v worried about it i paid 30000 rs to buy it ???
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it. -
The Property Inspector is missing the V Space and H Space fields in DW6 - where did they go?
I just downloaded DW6. The Property Inspector is missing the V Space and H Space fields, therefore I am unable to add space around my images. Suggestions?
It is no longer available because the problem with that was that it applied spaces around the image rather than where the user actually wanted them. You now need to use CSS and apply margins and paddings and target exactly where you want them by using something like this:
img {
margin-bottom: 0;
margin-right: 0;
margin-left: 0;
margin-top: 0;
padding-top: 0;
padding-right: 0;
padding-bottom: 0;
padding-left: 0;
img {
border: 0;
padding: 0;
The second style is generic to set margin and padding for all four sides.
Good luck. -
Where is the Lion version of Property List Editor?
I've downloaded XCode 4.1 and the Server Admin app in a vain attempt to find the property list editor. Does anyone know where it is?
This worked perfectly, thanks. I just had to adjust the permissions on the PListEdit.framework folder to match the other framework folders. I wouldn't have found it in the PrivateFrameworks folder without your help. Much appreciated.
In response to:
Well I figure that the plist editor is now integrated in XCode 4, but you could do the following: Get the
PlistEdit.framework (located in /Developer/Library/PrivateFrameworks/) and the "Property List Editor.app" from an earlier XCode-Installation and throw them into the corresponding folders of your XCode 4-Installation. -
Where Is the MAINMENU Defined in the "Menu Module" Property of MAINFORM
Hello Ya'll Gurus,
I am trying to locate both the MainMenu.mmx and it's source MainMenu.mmb files that is being executed in the application run time, but so far with no luck. I am desperately in need of your help, and the pressure is on...
I have found the following information in our environment and hopefully it will help in resolving my problem:
The following is the command that runs our application:
c:\orant\BIN\ifrun60.EXE C:\MMS\Production\mainform.fmx <userid>/<psswd>@mms
The following are the images of the property palettes for the MainForm and MainMenu forms:
Image for the mainform.fmb property palette:
!http://dot.state.ak.us/nreg/jtomasic/MainForm_Property_Palette.GIF!
Image for the mainmenu.mmb property palette:
!http://dot.state.ak.us/nreg/jtomasic/MainMenu_Property_Palette.GIF!
Please help me with the following questions:
Q1: Since "C:\MMS\Production\mainform.fmx" is included in the command line that runs our application and the "Menu Module" property of the "mainform.fmb" form is "MAINMENU", does it mean the "MAINMENU.mmx" is being executed through mainform.fmx when the application starts running?
Q2: If the answer to the above (Q1) question is yes, the 'MMS' defined in the Menu Filename is then not being used at all, correct? and where can I find the "MAINMENU" file specified in the "Menu Module" property of the "mainform.fmb" form?
Q3: The attached Libraries for the MAINFORM include HMMSHELP, MAINLIBR and MENULIBR. Are these libraries loaded to the MAINFORM dynamically or statically? BTW, the MENULIBR.pll is also attached to MAINLIBR.pll and what does that mean?
Q4: The 'Main Menu" property in the mainmenu.mmb form is defined as "MAIN_MENU" which ties the "MAINMENU" specified in the Menu Module property of the "mainform.fmb" form, correct?
Thanks in advance for any/all the help on this.Q2: If the answer to the above (Q1) question is yes, the 'MMS' defined in the Menu Filename is then not being used at all, correct? and where can I find the "MAINMENU" file specified in the >"Menu Module" property of the "mainform.fmb" form?Looking at the onlinehelp, the property "Menu filename" may be used if the menu is stored in the database. As far as i know this is not possible since forms 6i (but i may be wrong here). If i'm right, the property is no longer important.
About finding the MAINMENU. I don't know where you find it. If you get no error it seems that it is somewhere on your machine. I would look into the directory C:\MMS\Production first. If its not where, check the FORMS60_PATH-variable and search in the directories listed in that variable.
Q1: Since "C:\MMS\Production\mainform.fmx" is included in the command line that runs our application and the "Menu Module" property of the "mainform.fmb" form is "MAINMENU", does it >mean the "MAINMENU.mmx" is being executed through mainform.fmx when the application starts running?If i'm right about Q2, the answer is Yes.
Q3: The attached Libraries for the MAINFORM include HMMSHELP, MAINLIBR and MENULIBR. Are these libraries loaded to the MAINFORM dynamically or statically? BTW, the MENULIBR.pll is >also attached to MAINLIBR.pll and what does that mean?What do you mean with dynamically or statically?
Q4: The 'Main Menu" property in the mainmenu.mmb form is defined as "MAIN_MENU" which ties the "MAINMENU" specified in the Menu Module property of the "mainform.fmb" form, >correct?I don't understand your question. Forms searches the menu-module which is specified in the property "Menu Module" and "starts showing" the menu which is defined as the "main menu" -
Revision: 8024
Author: [email protected]
Date: 2009-06-19 16:59:25 -0700 (Fri, 19 Jun 2009)
Log Message:
Fixed an injection where setting the 'content' property of Spark text component to a TextFlow would cause you to get a TextFlow nested inside a TextFlow.
QE Notes: None
Doc Notes: None
Bugs: SDK-21906
Reviewer: Carol to review
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-21906
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/spark/primitives/RichEditableText.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/primitives/RichText.asWell, I've already solved one of the two issues
In order to display the icons on my buttonbar buttons, I just needed to point at {hostComponent.data.data} instead of {hostComponent.data}. I'm not sure why, but {hostComponent.data} in my skin class is a handle on my instance of ButtonBarButton, not its "data" property. Any explanation is welcomed
I still have got the first issue though. Oddly enough my design works if I put an mx Image instead of the spark BitmapImage for the client logo. That will do the trick for the moment but I'd prefer to deliver a 100% pure spark component in my prototype, and I can see no reason why BitmapImage works inside my ButtonBarButtons and doesn't otherwise... -
Revision: 4932
Author: [email protected]
Date: 2009-02-11 15:29:32 -0800 (Wed, 11 Feb 2009)
Log Message:
Fixed RTE with FxAnimate3DInstance, where a check in a superclass on whether the property was a style didn't succeed because the effect was using properties that weren't actually styles or properties on the object. Fine for the effect, but not for the superclass. Fix was to simply stub out the style check.
QE Notes:
Doc Notes: None
Bugs: SDK-19256
Reviewer: Ely
tests: checkintests, Mustella mx/effects/FxRotate3D
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19256
Modified Paths:
flex/sdk/branches/i10/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimate3DI nstance.asRevision: 4932
Author: [email protected]
Date: 2009-02-11 15:29:32 -0800 (Wed, 11 Feb 2009)
Log Message:
Fixed RTE with FxAnimate3DInstance, where a check in a superclass on whether the property was a style didn't succeed because the effect was using properties that weren't actually styles or properties on the object. Fine for the effect, but not for the superclass. Fix was to simply stub out the style check.
QE Notes:
Doc Notes: None
Bugs: SDK-19256
Reviewer: Ely
tests: checkintests, Mustella mx/effects/FxRotate3D
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19256
Modified Paths:
flex/sdk/branches/i10/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimate3DI nstance.as -
Howdy. I keep getting a message stating that my apple ID has been disabled. I recently contacted my CC company, AMEX, for several fradulent iTune charges, which is probably where the problem first originated. How can I resolve this issue?
I had to dispute several unauthorized charges to itunes. My apple id was disabled after that. I followed jarnoldus's (older post) advice and it worked. Im duplicating his entry here with a few modifications. I hope this works for you.
1. Go to https://getsupport.apple.com
2. Choose your product (mine was ipad)
3. Click the "iTunes, App Store or iBooks" icon
4. Click "Apple ID account security"
5. Type in "apple id has been disabled"
6. Choose your country (mine was US)
7. Choose the "talk to apple support now" option
8. Provide the info they request (name, email, phone number)
9. They will call you right away.
Explain your apple id has been disabled. The rep will connect you to an iTunes rep. He/she will look up your account. You will be required to answer your 3 security questions. You MUST get a minimum of 2 correct. If you succeed they will enable your id. Good luck! -
Where can I find docs on all the property nodes
Are all the property nodes for things like waveform charts and graphs documented somewhere. I have looked throught all the .pdf files that came with LV ( at least I think I have ) and haven't been able to find what I'm looking for.
If someone could point me to where all these are documented I would be most appreciative.
Thanks.The LabVIEW Help describes every VI Server property and method. The easiest way to find the help for a specific property and method is to select the property or method in the Property or Invoke Node, right-click the node, and select Help for xxx from the shortcut menu, where xxx is the name of the property or method.
In LabVIEW 6.0, you can browse the property and method help by selecting Help>Contents and Index, clicking the Contents tab, and navigating to Networking in LabVIEW>Properties and Methods.
In LabVIEW 6.1, select Help>VI, Function, & How-To Help, click the Contents tab, and navigate to Programmatically Controlling VIs>VI Server Properties and Methods.
Kelly H
LabVIEW Documentation
National Instruments -
IPad Air. The case. Where is the origin of that leather ?
iPad Air. The new case.
Where does the leather comes from ?
What is the origin ?
Which animal ?Cowhide, I would imagine. Were it anything else (exotic) it would surely be advertised/marketed as such.
-
Where does the Bill of substance maintained in property tree?
Dear Experts,
Where does the Bill of substance maintained in property tree? My understanding is it shows in section 2 in MSDS under composition tab. Please correct or confirm my understanding.
DevdattDear Devdatt
there are by standard two options available. Both have their pros and cons:
a.) Standard EHS Export => a process which is not user friendly and without specific access rights can not be used
b.) There are two other output variant available which you could check if they fulfill the needs of the users etc.:
Check e.g. Displaying Properties - Basic Data and Tools (EHS-BD) - SAP Library
as well as:
Displaying Specification Data - Basic Data and Tools (EHS-BD) - SAP Library
Regarding the first one: you can only download at max 50 properties in one run; regarding the second one: I am using this rarely but it is the most flexible one; not sure if the DG properties are supported. In any case: try it.
If neither a.) nor b.) are the right solution: just create your onw ABAP code and prepare a suitable output variant on your own. You can use the "full blown SAP scenario" here (a.g. ALV like output variants etc.) ; you need to "only" learn from ABApcode of the standard output variant so that you are able to create your own one. This approach is quite standard and used very often
Keep in mind. if you use STANDARD property tree and you have a lot of properties/data to be read performance is in most cases "bad"
C.B.
Maybe you are looking for
-
Issue in Workflow - Records not created at times
Hi All, We are using oracle workflow. I am facing an issue in live at times. Here in my case a procedure is called from a workflow function which in turn inserts records in a table automatically. Some times even though all conditions met to insert re
-
Blog -- use iWeb or link to outside site?
Have my webpage going (still working on it) -- want to add a blog but have heard that the iWeb blog can 'bog down' the speed of the page? is it best to use outside (ie: Wordpress, Blogger)-- if so, which one works best? (want to post pictures, occasi
-
Query on app.activeDocument.exportFile
(Apologies if this is an Illustrator scripting question rather than a CEP specific extension one) From Adobe Illustrator CC2014 HTML5 extension I am using app.activeDocument.exportFile to export the activeDocument to SVG. I have that working great bu
-
When I print A spreadsheet 2 copies print
I recently tried to make a spreadsheet in Numbers and when I print it it automatically prints 2 copies. I even see 2 copies when I use the preview function
-
i can't figure out my ringtones anymore has it changes and i don't know about it?