Where is the "Ratings" Info Stored?
I moved my music from an external 400GB drive to a new 750GB external drive.
My first issue was 30% of the links to my 66,000 songs were severed.
I had to re-build the song library by dropping my music back in to a blank iTunes Library. I then imported my former iTunes Library.xml document. My playlists came back but all the ratings info did not come over.
Where does iTunes store the ratings infomation?
I have much the same issue - a system failure, iTunes library restored by importing old 'iTunes Library.xml' file as recommended on this site, but I am left with no meta-data - in particular ratings. I still have backups of all the iTunes library files - how do I restore meta-data from them?
Thanks.
Similar Messages
-
Where is the password info stored?
I have multiple computers and I also upgrade from time to time. This kludgey itunes store/itunes app/sync business is obnoxious. Now I notice I'm being queried for my password to authorize this computer. It works but... Where is this stored so I can bypass all this crap?
This may resolve your repeated authorization problems.
http://support.apple.com/kb/TS1389
Also, you seem to describe an iTunes issue not an iPad issue. Therefore, you might want to post in an iTunes forum.
Message was edited by: lllaass to add ref to iTunes forum -
Where is the "Reject" label stored
Is the "Reject" label stored in the IPTC or XMP files? If so, what is it's variable name? I'm trying to kludge a couple of other viewers (which have some attributes that Bridge does not) so that they will show the "Reject" label in a manner similar to Bridge. They will correctly emulate the other colors and text labels, but don't recognize the "Reject" option.
And no, I don't want to give up Bridge because it also has unique attributes, especially Mini-Bridge.And no, I don't want to give up Bridge because it also has unique attributes,
Nobody here wants you to that, maybe they will advice you not to use other
viewers
especially Mini-Bridge.
Not quit what it should be yet but still at first version and yes it has
great potential!
As for your question, I believe the ratings are stored in the file itself
and I have no real knowledge about scripting but maybe that would be your
route.
I use DNG files (converted from CR2 files) and ratings can be found in the
XMP data using file info (either through PS or using Bridge).
Look under the tab 'Raw Data' and somewhere halfway you will see a line
containing the rating.
Reject is shown as a -1 ( <xmp:Rating>-1</xmp:Rating> )
If you used labels this info is shown underneath this line.
Strangely enough no label is not shown while no rating always shows as
Rating>0<
Hope this helps you somewhat. Don't know how the standard for rating is,
maybe Bridge uses the correct one and others not, maybe its just the other
way round. Sadly enough labeling is not always working between different
apps, even not in Bridge itself using different languages. When having used
rating in other language version they usually show white after using other
language. -
Where Are The Master Files Stored For iWeb?
I can't seem to figure out where the master files are stored in iWeb. For example I was trying to help of friend with his iWeb website, so I told him to send the files - and then I was planning to load them into iWeb on my computer... but I couldn't figure out where to put them... and he did not know where they were either!
Question: Where are the master files stored for iWeb?http://docs.info.apple.com/article.html?artnum=303670
http://iWebFAQ.com/1Site2Computers
http://iWebFAQ.com/#Backup -
When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI( I am not getting any error message in E$_TARGET_ANI_TEST).
When i am running the interface i am getting the below error against the errored step
"ORA-01045: user ABC lacks CREATE SESSION privilege; logon denied."
Only E$_TARGET_ANI_TEST is created with no data. No such tables like C$_0TARGET_ANI_TEST, I$_TARGET_ANI_TEST are created and also data is not inserted in the target table TARGET_ANI_TEST.Hi,
I have checked that only E$ table is created. C$ and I$ table are not created ( I have selected my target schema as the part for the staging table).
All the parameters for dropping the tables are selected as "<default>:false".
I am importing the following KMs with the following parameters:
1) CKM Oracle
DROP_ERROR_TABLE
:false
DROP_CHECK_TABLE
:false
CREATE_ERROR_INDEX
:true
COMPATIBLE
:9
VALIDATE
:false
ENABLE_EDITION_SUPPORT
:false
UPGRADE_ERROR_TABLE
:false
2) LKM SQL to SQL
DELETE_TEMPORARY_OBJECTS
:true
3) IKM SQL Incremental Update
INSERT
:true
UPDATE
:true
COMMIT
:true
SYNC_JRN_DELETE
:true
FLOW_CONTROL
:true
RECYCLE_ERRORS
:false
STATIC_CONTROL
:false
TRUNCATE
:false
DELETE_ALL
:false
CREATE_TARG_TABLE
:false
DELETE_TEMPORARY_OBJECTS
:true -
Where are the MMB files stored in unix box
Hi all,
Can anyone tell where are the MMB files stored in unix box. Thanks in advance.
Regards,
Sandeep VHi Thomas,
Thanks for the reply, I got the FNDMENU.mmb file , but Iam not able to find the menu item which Iam searching for. There are some special menu items like SPECIAL , SPECIALB and SPECIALC. So, when I select release from plan menu item special27 is called , but Iam not able to find release in this menu. Can you please help me in this regard.
Regards,
Sandeep V -
In transaction scase, where is the field 'status' stored ?
Hi
in transaction scase, where is the field 'status' stored (in Hdr. data), for a specific BP ?
thx.
Edited by: avijit saxena on Nov 12, 2008 10:10 PMtable>srmprotocol>filter on [ACT_ID] 'attribute change'>choose colom 'arg_string'->filter on 'stat_orderno'
-
Where is the connection information stored for Mac Remote Desktop?
I want to restore Mac Remote Desktop connection information from a Time Machine backup to a new Mac. On the new Mac, I've installed Remote Desktop from the App Store and installed all the files found in
~/Library/Containers/com.microsoft.rdc.mac from
a Time Machine backup. But I don't see my old connections. I also don't see any connection information in my Time Machine backup here
~/Documents/RDC Connections.
Where is the connection information stored?The path is correct. You could try to get an console log during application launch. This log might give you information why the information is missing.
-
Where is the account picture stored after initial setup?
where is the account picture stored after initial setup?
Are you looking to change the image? If so go to system prefs, go to accounts. You'll see the image that you see at login, by clicking on it you'll be given a drop down with all the images which you can select a different right there. If you go to the root directory in the libray folder you'll see a folder user pictures they are in there. The root directory is the main device on your hardrive, you can open finder and see it listed in the sidebar. Hope this helps!
Joseph -
Where is the network setup stored?
Hi all
My time capsule died and I bot a airport extreme. The setup went automaticly but I lost my old parameters.
Where are the network prefs stored? I would like to go back with time-machine and to see my old network-setup.
Thanks in advance
kkYes my computer backups automaticly - thanks god for time-machine ,-)
I have a static IP (as well as dynamic as it seems) and a server behind a firewall-setup. Thats why I would like to check back my old setup and prefs. But since Airport Express did everything automaticly - they are gone... -
Where's the song info on iTunes?
Hi!
Where's the "show info" button when you right-click on a song??? It would always say who the artist, composer etc. were...
Thanks!I mean on iTunes Store...
-
Where does the information get stored when you sync/back up your i-phone. I have no idea where to look if I need it again!
ThanksYou can chhose the backup when you would reset your device. In this case you would get the option, during the set up process, to choose your backup and restore your device from it.
(You can find a few information e.g. size and date of your backup in "Settings > iCloud > Storage & Backup > Manage Storage") -
Where is the summary info located for my device?
where is the summary info located on my ipod touch so I can change a setting?
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Go to iTunes>Help>iTunes Help>Sync your iPod....>Overview -
Quick qs: Where is the Reconciliation Policy stored under debug?
It seems whenever we import files into IDM, we accidently step over the reconciliation policies set up for various resources. And I do not know where these are stored - which xml files?
I initially thought that these are in the resources themselves - but I was wrong, because even if I do not import the resources, the reconciliation policies are erased.
Please let me know where are the reconciliation policies stored in IDM?
Thanks iaThank you - I think that was what I was looking for.
A -
ASA5510: where is the startup-config stored?
Hi,
i'm new to cisco's asa and trying to get used to it. it's not a real problem i have, which detains me from productive work but i'm just snoopy about this. on my cisco 871, when i do a
dir nvram:
i see a file called startup-config. but i can not find it on my asa 5510. i have a disk0-1:, flash: and system: but nowhere a startup-config. but it must be somewehre because a
copy tftp startup-config
is working somehow and does what i expect. furthermore, where are the cryptographic keys stored. the same issue. i can not find them. maybe someone of you is able to point me to this. thanks.
ct,The startup configuration for single mode or for the system in multiple context mode is a hidden file in flash memory. From within a context, the location of the startup configuration is specified by the config-url command. For example, if you specify an HTTP server for the config-url command and then enter the copy startup-config running-config command, the security appliance copies the startup configuration from the HTTP server using the admin context interface.
Also check the details about the commands "copy" and "configure-url" in the links below: 1)COPY--http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2104587
2)CONFIGURE-URL----http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2100481
Maybe you are looking for
-
Help popup on click of a button
Hi All, The requirement is on click of a URL link on the adobe form, a popup should come which will have help text regarding certain field. Currently this is done by creating webdynpro application which will have the help text. On click of URL, the p
-
Hi Experts, I would like to restrict the user to add Goods Issue if the quantity is higher than the instock as per selected warehouse in goods issue. below is the query i created that only compare with the instock (overall).. i need to restrict per s
-
Debugging Shopping Cart / Floor Plan Manager
Hello, I am trying to debug the shopping cart in SRM 7. In step 2 there is a button 'check' and I am looking for the eventhandler of this event. In the floorplanmanager i found out that the component in this step is /sapsrm/wdc_sc_wz_gaf_2st. In the
-
We have a site that has a PagePac unit connected to a FXS port. CM is 4.1.3sr2. When the receptionist steps away / end of day, they forward the main number to the overhead night bell. The Night Bell is in a pickup group, as are all the phones, so tha
-
I have an All in One C7280 HP printer and have not in the last two years been able to figure out how to just print in black. Not greyscale... not color...just black. My other HP printer would allow me to set it to color, greyscale or black, fast dr