Where is the server configuration data stored?

Where is the server configuration data stored?
<P>
The data is stored an ASCII file named server.conf
. This file is stored in
the config directory on the same server-root as the iCS 2.0 binaries. The
format of the server.conf
file is described in detail in the Administration
Guide.

Try to read
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
UME user data is stored in one or more data sources. Each type of data source has its own persistence adapter. The persistence manager consults the persistence adapters when creating, reading, writing, and searching user management data. Persistence adapters for the following types of repositories are available: 1. Database: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which databases are supported. 2. u2022 Lightweight Directory Access Protocol (LDAP) directory: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which directories are supported. 3. SAP Systems based on Web Application Server 6.20 You can configure UME to use one or more of these persistence devices in parallel. Users can also be stored in several different physical LDAP directory servers, or in different branches of the same LDAP directory server.

Similar Messages

Where is the printer configuration info stored?

I need to configure printing for a whole lab, and while I can configure an individual machine for one user via the Print/Fax option of System prefs, I can't find where all that info gets stored (some of it is in ~/Library/Preferences/com.apple.PrintingPrefs.plist, but not all) and I can't figure out how to slide that in as a whole-system configuration. Where is the per-user information stored, and where can I move it so that it applies system-wide?

The printer queues are global so most of the information is not kept under any particular user. The path you mentioned keeps user relevant information, such as Presets.
If the printers are using files that are included with 10.5, then the majority of compressed driver files are kept in ./Libary/Printers/Vendor or ./Library/Printers/PPDs/Contents/Resources/en.lproj for PostScript PPDs.
When you add a printer queue, some of the information is kept in ./etc/cups. This includes the printers.conf file which has details about the added printer queues and the decompressed PPD that was selected during the queue creation.
So if you are looking at copying the data from one Mac to reduce your setup on all the other Mac's, then you may have to tell us the make and model, as there could also be a number of additional directories/files you need.
PaHu

Where is the administrative user data stored?

Hi I am trying to implement a simple user management application
in an weblogic server (10.3.2).
The user data is stored in an oracle database and the SQLAuthenticator is configured correctly.
Everything works fine, the user gets authenticated, created and deleted.
But when I try to log in several times with the wrong password, the server locks me out.
I know that i can unlock the user via the console but my question is:
Where is this information stored so that i can reset it using my user management aplication?
Can anyone help me or is this a big weblogic secret?
Regards
Edmund

Can anyone help me or is this a big weblogic secret?
Why do u want to know it???
There are ways by which u can unlock the user programatically.. i dont think u can unlock it by modifying some files on WLS, not recommended either...
U can use the following Mbeans
weblogic.management.security.authentication.UserLockoutManagerMBean
weblogic.management.runtime.UserLockoutManagerRuntimeMBean
http://weblogic-wonders.com/weblogic/2010/07/25/userlockout-feature-of-weblogic-server/

Where is the batch expiration date stored?

I created a GR and received in materials of a certain batch, assigning an expiration date. When I go into MSC3N I can see the batch with the expiration date that I assigned; however when I go into the batch table (MCHA) the field VFDAT (Shelf Life Expiration or Best-Before Date) is blank. Where is this data being stored? It must be somewhere because it's pulling into the program to view batches.
Thanks.

check in table MCH1.
If data is stored in MCH1 or MCHA is dependend on your batch level.

Where does substitution variable meta data stored?

where does substitution variable meta data stored in the essbase folder?<BR>Thanks<BR>Arun

I believe substitution variables are stored in the Essbase.sec (Security file).

Alert: The backup operation for the cluster configuration data has been canceled due to an abort request

Hello,
Alert: The backup operation for the cluster configuration data has been canceled due to an abort request
Alert description: The backup operation for the cluster configuration data has been canceled. The cluster Volume Shadow Copy Service (VSS) writer received an abort request.
This is the backup of VSS which is sending this alert every morning.
Event ID 1544
All fixes I found are applied..
kb2277439 has already been applied
978527 is there too
975921 is there too..
any other id
Cluster Node /Status gives both nodes up A & B
The error is coming only on Node A...
Any idea?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hi,
Which backup software do you use to do a backup? Please also try to apply those hotfix on the Cluster:
A transient communication failure causes a Windows Server 2008 R2 failover cluster to stop working
http://support.microsoft.com/kb/2550886
The network location profile changes from "Domain" to "Public" in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2524478
Recommended hotfixes and updates for Windows Server 2008 R2 SP1 Failover Clusters
http://support.microsoft.com/kb/2545685/EN-US
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I like to know the table name where all the Interface name ( Data Type and

Dear Friends,
I like to know the table name where all the Interface name ( Data Type and Message Type in IR ) is stored.
Thanks.

Hi,
Please find the repository APIs in the SE24 class builder that can be used for accessing repository objects from the ABAP stack of SAP XI. Check CL_SRAPI* in the SE24 transactions for digging further.
location of interface objects
CL_SRAPI_DATA_TYPE---data type
CL_SRAPI_DATA_TYPE_ENH---data type enhancement
CL_SRAPI_FAULT_MESSAEG_TYPE--fault message type
CL_SRAPI_MESSAGE_TYPE--message type
CL_SRAPI_INTEGRATION_SCENARIO--integration scenario
have a look at the table SXMSPMAST, SXMSCLUP & SXMSCLUR
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fbe7b8e-0a01-0010-b69b-b7e717378f22#search=%22SXMSPMAST%20%2B%20XI%22
That document has references to lot of tables maybe it can be of use to u.
Look at the below thread for SXMB_MONI tables and Function module:
In Which Database Table the Messages are Stored in XI
Message Monitoring --> corresponding tables?
Edited by: Dharamveer Gaur on Oct 8, 2008 10:40 AM

Where get the hardware configuration information?

Where get the hardware configuration information and where to delete cookie on the Fedora8 OS?

Where get the dmdecode information?please install it from FC8 DVD, the package name is dmidecode-2.7-1.26.1.fc6.i386.rpm
Yes, I want to delete cookie on browser--firefox Clean your firefox cache data from:
menu bar--->Tools-->Clean Private Data.

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

URL file-access is disabled in the server configuration

My hosting company has made a server config change and my xslt pages have stopped working with the following error.
It says url file access is disabled but my phpinfo() still shows allow_url_fopen = on
What else might be the problem?
Warning: require_once() [
function.require-once]: URL file-access is disabled in the server configuration in
/homepages/0/xxx/htdocs/xxxx/inc/horoscope_xml.php on line
3
Warning: require_once(
http://www.xxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php) [
function.require-once]: failed to open stream: no suitable wrapper could be found in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3

bikeman01 wrote:
I don't understand your use of the word 'class' in your reply - I am using php not asp.net.
The name of the file that you are trying to access is MM_XSLTransform.class.php. It is a PHP class created by Dreamweaver for the XSL Transformation server behavior.
The servers php is 5.2.11, as it has been for sometime, so I know that it previously worked with allow_url_fopen = on and allow_url_include = off
Judging from the error message, you are trying to include the file using a URL, rather than a file path:
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Change the URL to a file path:
require_once('/homepages/0/xxxx/htdocs/includes/MM_XSLTransform/MM_XSLTransform.class.php');
Is it possible for phpinfo() to show allow_url_fopen = on yet be actually off on the server?
No.
[Edited to correct name of server behavior]

The Boot Configuration Data file is missing requires Information

My ideapad U310 doesn't boot any more after the boot procedure was interrupted by power outage.
A blue screen shows the following:
Recovery
Your PC needs to be repaired
The Boot Configuration Data file is missing some required information.
File: \BCD
Error Code: 0xc000000d
You'll need to use the recovery Tools on your installation Media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
Press ESC for UEFI Firmware Settings

I can only make one suggestion. Boot from usb Recovery flash drive and hope that the startup repair will do their magic to your unit.

HP Stream 7 The boot configuration data file is missing some required information

I have an HP Stream 7 tablet. When I open it up it shows a blue screen with the error "The boot configuration data file is missing some required information." Can anyone help as I can't get into the tablet to solve the error!

Hey @PaD2 ,
Welcome to the HP forums.
I understand you're unable to boot up your Stream 7 tablet.
Try accessing the recovery partition by holding the volume down button and power button at the same time. Please excuse my ignorance, as exact information on accessing the recovery manager appears to be unavailable for this exact model. If the down button doesn't work, up should get you in.
Once in the recovery manager you should be able to select Troubleshoot > Startup repair.
If the startup repair does not fix the issue I would suggest trying the full system recovery option, which you should find under Troubleshoot > Advanced.
Thanks.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

A port conflict was detected in the server configuration

Hi
Iam getting following error message "A port conflict was detected in the server configuration" error when I run startWeblogic.sh. I checked same in config.sh file about repeatation of port for channel sip but it is not repeated. Please help me out
I have run nodemanager successfully on 5556 port but I have admin server starting problem I tried both $DOMIAN_HOME/startWeblogi.sh and $DOMAIN_HOME/bin/startWeblogic.sh location and I am getting same issue.
Error message:
####<May 4, 2011 10:43:23 AM IST> <Info> <WebLogicServer> <HSCHARTOMR0112> <> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1304486003957> <BEA-000000> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<May 4, 2011 10:43:24 AM IST> <Notice> <Log Management> <HSCHARTOMR0112> <> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1304486004002> <BEA-170019> <The server log file /u01/BEA/MW_HOME/user_projects/domains/base_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Log Management> <HSCHARTOMR0112> <> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1304486004005> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Diagnostics> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004044> <BEA-320001> <The ServerDebug service initialized successfully.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004141> <BEA-002622> <The protocol "t3" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004141> <BEA-002622> <The protocol "t3s" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004141> <BEA-002622> <The protocol "http" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004142> <BEA-002622> <The protocol "https" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004142> <BEA-002622> <The protocol "iiop" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004143> <BEA-002622> <The protocol "iiops" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004144> <BEA-002622> <The protocol "ldap" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004144> <BEA-002622> <The protocol "ldaps" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004147> <BEA-002622> <The protocol "cluster" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004148> <BEA-002622> <The protocol "clusters" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004152> <BEA-002622> <The protocol "snmp" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004152> <BEA-002622> <The protocol "admin" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004153> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004157> <BEA-002622> <The protocol "sip" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004158> <BEA-002622> <The protocol "sips" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004159> <BEA-002622> <The protocol "sips-admin" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004164> <BEA-002622> <The protocol "diameter" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004165> <BEA-002622> <The protocol "diameters" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Info> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004166> <BEA-002622> <The protocol "diameter-sctp" is now configured.>
####<May 4, 2011 10:43:24 AM IST> <Emergency> <Server> <HSCHARTOMR0112> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1304486004185> <BEA-002633> <A port conflict was detected in the server configuration. The server is configured to listen on two ports that have the same port number and IP address. Channel "sip" address "sip://fe80:0:0:0:fcff:ffff:feff:ffff:5006" conflicts with channel "sip" address "sip://fe80:0:0:0:fcff:ffff:feff:ffff:5006".>
####<May 4, 2011 10:43:24 AM IST> <Critical> <WebLogicServer> <HSCHARTOMR0112> <AdminServer> <main> <<WLS Kernel>> <> <> <1304486004186> <BEA-000362> <Server failed. Reason: Network configuration error, check log for details.>
####<May 4, 2011 10:43:24 AM IST> <Notice> <WebLogicServer> <HSCHARTOMR0112> <AdminServer> <main> <<WLS Kernel>> <> <> <1304486004281> <BEA-000365> <Server state changed to FAILED>
####<May 4, 2011 10:43:24 AM IST> <Error> <WebLogicServer> <HSCHARTOMR0112> <AdminServer> <main> <<WLS Kernel>> <> <> <1304486004281> <BEA-000383> <A critical service failed. The server will shut itself down>
####<May 4, 2011 10:43:24 AM IST> <Notice> <WebLogicServer> <HSCHARTOMR0112> <AdminServer> <main> <<WLS Kernel>> <> <> <1304486004283> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<May 4, 2011 10:43:24 AM IST> <Info> <WebLogicServer> <HSCHARTOMR0112> <AdminServer> <main> <<WLS Kernel>> <> <> <1304486004283> <BEA-000236> <Stopping execute threads.>
Thanks,
Phani
Edited by: Phani on 3 May, 2011 10:28 PM
Edited by: Phani on 4 May, 2011 1:25 AM
Edited by: Phani on 4 May, 2011 3:03 AM

Refer:- wlcs_server1 won't start - sipchannel port conflict
-Akshay

Where does the supporting deatil is stored? in Planning or Essbase?

Where does the supporting deatil is stored? in Planning database (RDMS) or Essbase database?
Appreciate if u could reply ASAP.
Thanks in Advance!!

Supporting details are stored in Planning Applications RDBMS. check out HSP_COLUMN_DETAIL and HSP_COLUMN_DETAIL_ITEM in the application relational database
Re: Refresh Database
I can see 6 question and all are unresolved, Mark the answers if you think they are correct or helped you and close the thread.
Cheers..!!
Edited by: RahulS on Jun 21, 2011 3:58 PM

I have an iMac, where are the completed print jobs stored on the iMac and what format are they?

I have an iMac, where are the completed print jobs stored on the iMac and what format are they?
My OSX is 10.10.1

Hi
If you are using standard system or HP drivers, than the jobs contents are not saved at all.
You can see the list of completed jobs per printer via this URL: http://127.0.0.1:631/printers/
If you want to save a print job, you can do it in the print dialog, by selecting an action prom "PDF" popup.
It allows to save a job (prior or instead to printing it) as PDF or PostScript.

Where is the server configuration data stored?

Similar Messages

Maybe you are looking for