Where is the setting of 50% cenvat in case of asset in SPRO

Hi,
In case of asset if we select the Asset in J1ID for the material and if asset code is mention in the PO then system post the 50% of the duty to the on hold account this is OK, but i want to know where is the setting for this 50% , this is just for information, is it hard coded in the program or the 50% is mention in customizing can we change this 50% to some other value,
regards,
zafar

M adding up in above.......
in J1id , select Material and Chapter ID Combination , give material type assets. Based on Material type, system calculates Cenvat and treat like that. U dont need to do much difeerent anyth in the case of assets.
Also cross check that u have ticked Immediate credit on capital goods in Company code settings.
Before posting any excise invoice it is advisable to see the simulation of excise invoice for correct posting of u201CCenvat on holdu201D and u201CCenvat availu201D part.
thanks

Similar Messages

Where is the setting in LR 2.0 to turn on the view the embedded jpg file instead of rendering a thum

Where is the setting in LR 2.0 to turn on the view the embedded jpg file instead of rendering a thumbnail image from the RAW file?

Doug, this is a user to user forum so you get advice here from other users just like yourself.
AFAIK LR will show the embedded jpeg until it renders its own preview after that there is no way to get it to show the embedded jpeg.
When you are importing photos into LR in the import dialog box there is an option to show a preview of the embedded jpeg while the import is actually taking place.
Also this is the regular LR user to user forum and there is a link to the LR 2.0 Beta forum at the top of this forum. Maybe its best to post your question there.

Where is the setting to set up pages instead of spreads? Need to pdf separate pages from a spread setup.

Where is the setting to set up pages instead of spreads? Need to pdf separate pages from a spread setup.

This is the selection you're looking for:

Where is the Set Adapter Specific Attributes indicator on the comm channel?

I really think I must be losing it guys.
We are SP16, we went directly to SP16 from 9, so we skipped over SP14.
When I go into a communication channel and choose an adapter(File) for instance. I cannot find the Set adapter-specific message attributes indicator anywhere!
Someone please tell me where it is located! If possible please send a screenshot to [email protected]
Thanks,
chris

Hi,
did you reimport SAP BASIS component to IR ?
just like specified in question 3 (adapter section)
in the XI FAQ?
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Regards,
michal

Where is the setting of iFrame?

Hi,experts.
I've never heard iFrame but I have to do the setting of iFrame(iframe connection definition).
If anyone know where the setting is, could you tell me it?
And could you tell me what's iFrame?(now I'm using this function in ITS)
Best Regards.
Miki

iframe is a HTML tag. check this link for more info.
http://www.w3schools.com/TAGS/tag_iframe.asp

Event triggered by ECO Status change. Where is the setting in the system?

Hi experts, I am looking into some custom developed workflows and one of them is has a triggering event "Status10" which is triggered when a ECO has been changed to status 10. Object type of the event is ECM. How can I find out where this setting of this event is. I just cannot find where in the system that this event "Status10" is being triggered when the ECO status is changed. I can see in transaction SWUE that it has the Workflow as the receiver type and the object key is the ECO number.
Can anybody share some light?
Thank you

You can check this configuration in TCode: SWE2. Here the setting between Wflow and event is stored. If you want to check how the event is getting triggered you can check transaction code BSVZ.
<b>Reward points if useful</b>
Thanks
Arghadip

I want to have two home pages when I open Firefox, where is the setting for this?

In my computer class at school the instructor told us that you can set your browser to have two tabs open when you start the browser... I would like to be able to have my Facebook and my favorite blog to come up every time I open FireFox, but I cant find the setting myself... please help!!

Hi b_dan_gidd,
All you have to do is open both pages in different tabs and then choose ''Use Current Pages'' while you are setting your home page. It's actually really easy. Just take a look at the Knowledge base article [[How to set the home page]].
Hopefully this helps!

Where is the set up wizard?

I uninstalled firefox in order to download a clean version but don't get to the set up wizard. I recently encountered a trojan horse that caused me to quarantine certain archive functions. What do I look for and how do I fix this?
== Firefox was "not responding" so I rebooted in safe mode to scan for viruses. I found that I couldn't install. I downloaded a service pack from MS for an installer and now I can download firefox (apparently) but can't see it on the control panel or in icon form, and can't access the set up wizard. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

My problem was that the set up wizard never showed up, though I downloaded several times to replicate the problem. Though downloaded, firefox never showed up as a download or as an icon, and neither did the wizard.

Where is the "setting mouse options" toolbar in 5.5?

I just upgraded from Captivate 4.0 to 5.5. I used the "setting mouse options" toolbar in 4.0 all the time but I can't find it in 5.5. Am I able to turn it on in 5.5? I'm looking for a way of telling at a glance if a slide has mouse sound on it or not. Is this still in 5.5?

LOL, only you can truly decide if any upgrade of any software is "worth it".
Indeed, Captivate 5 and 5.5 are advancements in some areas and a return to the dark ages for other areas. So is the nature of upgrades, eh?
All I can do is to suggest you file a Wish Form to advise Adobe that you found the option useful and to vote for bringing it back. I say "vote" intentionally, because using the Wish Form it is actually a voting system. The more of these they see requesting a specific feature, the higher the odds that the request will eventually be taken seriously.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

HT4914 I can't update the apps! It ask me to change back to macau store , but I don't know where's the setting!

Every time it want to update or buy a new apps by my 4s. But the apps system ask me that to change back to Macao store in the settings,but I can't find out the setting! Pls help and let me know how to do ! Thx

You can create an account without a credit card, check here:
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card

My iPhone 4s no longer has sound for any of the applications but it does have sound for phone functions. Where is the setting for app sound? I have gone to the multitask screen and the volume bar is empty.

I recently found my phone outside in light rain (it had been there about 20 minutes). It had some glitches at first, however after letting it rest overnight it seemed to mostly recover. The one problem I am having is that I no longer have sound for any of my applications. I do have sound for phone fuctions, and I am able to use the speaker for phone functions.
When I am in my applications, including music/videos, the only way I can hear is if I use my earbuds. I am able to make a video and it will record sound just fine.
When I go to the multitask screen, the volume bar is empty and I cannot adjust it using the side buttons (even though in settings I have that feature activated). I completely reset all of my settings tonight and that did not make a difference.
Is there a setting I am missing, or am I just SOL? I am trying to avoid having to get a whole new phone but it is very frustrating to not have sound with my applications.

Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy

"Don't load tabs until selected" ... Where is the setting so that it affects the tabs when I click "Open all in tabs" from History?

I am trying to reload all the tabs from history, it's a couple thousand. I am not concerned about system RAM I have 16GB. I know it will be slow, I'm not looking for any warnings or questions about why I have to reload that many tabs or how to work with the restore.bak sessionstore files.
The question I need an answer to is, "What setting do I need to change so that when I reload multiple tabs, it doesn't say "connecting" on all of them even though I have already selected "Don't load tabs until selected"

I think we both understand what you want. And we're both saying we are not aware of any built-in way to do this.

I want my home page to open every time I open a new tab. Where is the setting for that?

When I open a new tab it is always blank. I want it to automatically open to my home page every time I open a new tab.
I thought I found a setting for this, but I can not find it now.

There is no setting for this, but you can do that by using an add-on such as:
* NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
* New Tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage
Another way of opening the home page in a new tab is to middle click on the home button in the navigation toolbar.

Where is the "set" method for this ELEMENT?

Hi
I'm trying to understand the relationship between the DTD and XJS, and the JAXB generated code.
Consider the example DTD, XJS, and generated source code (i.e., "value07.java") for ELEMENT value07, below ...
QUESTION#1: Why is there no "set" method generated for ELEMENT "value07a" within the generated value07.java ???
QUESTION#2: How to I code the DTD/XJS in order to force the generation of a "set" method in value07.java???.
-- I want to be able to set a new value for ELEMENT "value07a" in order to generate an XML document containing the new value!!
(NOTE: the reason that ELEMENT value07 (as well as other ELEMENTs) has only a single subelement, is in order to satisfy the XSLT definition in a preexisting application.)
* * * this is the DTD* * *
<!ELEMENT request                          (value01,value02,value03,value04,value05?,value06?,value07?,value08?,value09?,value10?,value11?,value12?,value13?,value14?,value15?,value16?,value17?,value18?)>
<!ELEMENT value01                          (#PCDATA)>
<!ELEMENT value02                          (#PCDATA)>
<!ELEMENT value03                          (#PCDATA)>
<!ELEMENT value04                          (value04a, value04b?)>
<!ELEMENT value04a                          (#PCDATA)>
<!ELEMENT value04b                          (#PCDATA)>
<!ELEMENT value05                          (value05a, value05b?)>
<!ELEMENT value05a                          (#PCDATA)>
<!ELEMENT value05b                          (#PCDATA)>
<!ELEMENT value06                          (value06a+)>
<!ELEMENT value06a                          (#PCDATA)>
<!ELEMENT value07                          (value07a+)>
<!ELEMENT value07a                          (#PCDATA)>
<!ELEMENT value08                          (value08a+)>
<!ELEMENT value08a                          (#PCDATA)>
<!ELEMENT value09                          (value09a+)>
<!ELEMENT value09a                          (#PCDATA)>
<!ELEMENT value10                          (value10a+)>
<!ELEMENT value10a                          (#PCDATA)>
<!ELEMENT value11                          (value11a+)>
<!ELEMENT value11a                          (#PCDATA)>
<!ELEMENT value12                          (value12a+)>
<!ELEMENT value12a                          (#PCDATA)>
<!ELEMENT value13                          (value13a+)>
<!ELEMENT value13a                          (#PCDATA)>
<!ELEMENT value14                          (value14a+)>
<!ELEMENT value14a                          (#PCDATA)>
<!ELEMENT value15                          (value15a+)>
<!ELEMENT value15a                          (#PCDATA)>
<!ELEMENT value16                          (value16a+)>
<!ELEMENT value16a                          (#PCDATA)>
<!ELEMENT value17                          (value17a+)>
<!ELEMENT value17a                          (#PCDATA)>
<!ELEMENT value18                          (value18a+)>
<!ELEMENT value18a                          (#PCDATA)>
* * * this is the XJS * * *
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE xml-java-binding-schema SYSTEM "http://java.sun.com/dtd/jaxb/1.0-ea/xjs.dtd">
<xml-java-binding-schema version="1.0-ea">
<options package="testSourceCode"/>
<element name="request" type="class" root="true"/>
     <element name="value01"                               type="value"/>
     <element name="value02"                               type="value"/>
     <element name="value03"                          type="value"/>
     <element name="value04" type="class">
          <content>
               <element-ref name="value04a" />
               <element-ref name="value04b" />
          </content>
     </element>
     <element name="value05" type="class">
          <content>
               <element-ref name="value05a" />
               <element-ref name="value05b" />
          </content>
     </element>
     <element name="value06" type="class">
          <content>
               <element-ref name="value06a" />
          </content>
     </element>
     <element name="value07" type="class">
          <content>
               <element-ref name="value07a" />
          </content>
     </element>
     <element name="value08" type="class">
          <content>
               <element-ref name="value08a" />
          </content>
     </element>
     <element name="value09" type="class">
          <content>
               <element-ref name="value09a" />
          </content>
     </element>
     <element name="value10" type="class">
          <content>
               <element-ref name="value10a" />
          </content>
     </element>
     <element name="value11" type="class">
          <content>
               <element-ref name="value11a" />
          </content>
     </element>
     <element name="value12" type="class">
          <content>
               <element-ref name="value12a" />
          </content>
     </element>
     <element name="value13" type="class">
          <content>
               <element-ref name="value13a" />
          </content>
     </element>
     <element name="value14" type="class">
          <content>
               <element-ref name="value14a" />
          </content>
     </element>
     <element name="value15" type="class">
          <content>
               <element-ref name="value15a" />
          </content>
     </element>
     <element name="value16" type="class">
          <content>
               <element-ref name="value16a" />
          </content>
     </element>
     <element name="value17" type="class">
          <content>
               <element-ref name="value17a" />
          </content>
     </element>
     <element name="value18" type="class">
          <content>
               <element-ref name="value18a" />
          </content>
     </element>
</xml-java-binding-schema>
* * * generated sourcecode for ELEMENT "value07"...i.e., "value07.java" * * *
package testSourceCode;
import java.io.IOException;
import java.io.InputStream;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import javax.xml.bind.ConversionException;
import javax.xml.bind.Dispatcher;
import javax.xml.bind.Element;
import javax.xml.bind.InvalidAttributeException;
import javax.xml.bind.InvalidContentObjectException;
import javax.xml.bind.LocalValidationException;
import javax.xml.bind.MarshallableObject;
import javax.xml.bind.Marshaller;
import javax.xml.bind.MissingContentException;
import javax.xml.bind.PredicatedLists;
import javax.xml.bind.PredicatedLists.Predicate;
import javax.xml.bind.StructureValidationException;
import javax.xml.bind.UnmarshalException;
import javax.xml.bind.Unmarshaller;
import javax.xml.bind.Validator;
import javax.xml.marshal.XMLScanner;
import javax.xml.marshal.XMLWriter;
public class Value07
extends MarshallableObject
implements Element
private List _Value07A = PredicatedLists.createInvalidating(this, new Value07APredicate(), new ArrayList());
private PredicatedLists.Predicate pred_Value07A = new Value07APredicate();
public List getValue07A() {
return _Value07A;
public void deleteValue07A() {
_Value07A = null;
invalidate();
public void emptyValue07A() {
Value07A = PredicatedLists.createInvalidating(this, predValue07A, new ArrayList());
public void validateThis()
throws LocalValidationException
if (_Value07A == null) {
throw new MissingContentException("value07a");
public void validate(Validator v)
throws StructureValidationException
public void marshal(Marshaller m)
throws IOException
XMLWriter w = m.writer();
w.start("value07");
for (Iterator i = _Value07A.iterator(); i.hasNext(); ) {
w.leaf("value07a", ((String) i.next()).toString());
w.end("value07");
public void unmarshal(Unmarshaller u)
throws UnmarshalException
XMLScanner xs = u.scanner();
Validator v = u.validator();
xs.takeStart("value07");
while (xs.atAttribute()) {
String an = xs.takeAttributeName();
throw new InvalidAttributeException(an);
List l = new ArrayList();
while (xs.atStart()) {
if (xs.atStart("value07a")) {
xs.takeStart("value07a");
String s;
if (xs.atChars(XMLScanner.WS_COLLAPSE)) {
s = xs.takeChars(XMLScanner.WS_COLLAPSE);
} else {
s = "";
String uf;
try {
uf = String.valueOf(s);
} catch (Exception x) {
throw new ConversionException("value07a", x);
l.add(uf);
xs.takeEnd("value07a");
} else {
break;
Value07A = PredicatedLists.createInvalidating(this, predValue07A, l);
xs.takeEnd("value07");
public static Value07 unmarshal(InputStream in)
throws UnmarshalException
return unmarshal(XMLScanner.open(in));
public static Value07 unmarshal(XMLScanner xs)
throws UnmarshalException
return unmarshal(xs, newDispatcher());
public static Value07 unmarshal(XMLScanner xs, Dispatcher d)
throws UnmarshalException
return ((Value07) d.unmarshal(xs, (Value07 .class)));
public boolean equals(Object ob) {
if (this == ob) {
return true;
if (!(ob instanceof Value07)) {
return false;
Value07 tob = ((Value07) ob);
if (_Value07A!= null) {
if (tob._Value07A == null) {
return false;
if (!_Value07A.equals(tob._Value07A)) {
return false;
} else {
if (tob._Value07A!= null) {
return false;
return true;
public int hashCode() {
int h = 0;
h = ((127 *h)+((_Value07A!= null)?_Value07A.hashCode(): 0));
return h;
public String toString() {
StringBuffer sb = new StringBuffer("<<value07");
if (_Value07A!= null) {
sb.append(" value07a=");
sb.append(_Value07A.toString());
sb.append(">>");
return sb.toString();
public static Dispatcher newDispatcher() {
return Request.newDispatcher();
private static class Value07APredicate
implements PredicatedLists.Predicate
public void check(Object ob) {
if (!(ob instanceof String)) {
throw new InvalidContentObjectException(ob, (String.class));

I discovered something similar this morning...i.e., for
<element name="value07" type="class">
<content>
<element-ref name="value07a" />
</content>
</element>
-- I did something like this...
Value7 v7 = new Value7();
for (int i=0; i< Value7_input_array.length; i++)
((List)(v7.getValue07A())).add(Value7_input_array);
Thanks for responding, barry!

Where is the setting to turn off descriptive audio

I cannot find a way to turn off descriptive audio overlay in QT player, so there are two slightly out of sync soundtracks with a descriptive audio track.
What is the solution?

This isn't built in but if you Google something like
"iphone settings shortcuts without jailbreak" you'll find various ways to set these shortcuts up. It's not exactly "official" but it does not involve doing that "escaping from legal custody" thing which we cannot mention here

Where is the setting of 50% cenvat in case of asset in SPRO

Similar Messages

Maybe you are looking for