Where is the "Settings" Option in Camera Raw 4.1 in Elements 5?
I'm using Elements 5 on Windows XP Home Version. Where is the "Settings" Option on RAW 4.1? On RAW 3.5 it was underneath the Histogram. I need to copy settings from a previous RAW file, so I can combine two images into one. The Help Menu on Elements 5 tells me how to do this, but the "Settings" Option it mentions isn't displayed on the screen.
I'd be grateful for any advice.
Thanks
Pam
Thomas Knoll should know everything, since he is the creator of Photoshop and Camera Raw.
Saturation affects all colors in your image.
Vibrance affects the saturation of less saturated colors only.
Recover helps bring out detail in the highlight areas of your image.
Clarity is sort of a sharpness control. To see its effect on your images you must be viewing your image at at least 100% magnification.
Similar Messages
-
Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.
See for yourself which version of ACR is needed for that camera’s RAW files
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
then check your version (Photoshop > About Plug-In > Camera Raw).
Your version of Photoshop does not support that version of ACR.
You could use the free DNG Converter. -
I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed. -
Where did the .jpeg option go when saving?
I used to be able to save a .cr2 file that I had edited in the .jpeg format. For some reason that is no longer offered as an option in the drop down menu when I use 'save as'. Where did the .jpeg option go?
It's not there because the CR2 image is using 16-bit color.
Either:
Change the bit depth in Camera RAW to 8-bit before opening it in the Editor.
In the Editor, use Image...Mode...8 bits/channel.
Ken -
Where are the settings to make Acrobat software recognize my scanner?
Where are the settings to make Acrobat software recognize my scanner? I've had my computer on a road trip. When I returned to the home office, I can't get Adobe Acrobat 10 Pro software to recognize my scanner, which is a 4-in-one printer. Acrobat will print to the printer, but I can't get it to recognize the scanner to scan a document. Any suggestions as to how to fix this?
Open the Acrobat application(Acrobat X) and later navigate to Create>PDF from scanner>Configure presets and later select the Scanner which is connected to your computer and check it will work.
If you are getting two options ie WIA and TWAIN please select TWAIN as Acrobat is compatible with TWAIN interface than WIA. -
Where is the station options configuration stored
Where is the station options configuration gets stored in TestStand 4.2.1?
Solved!
Go to Solution.The StationGlobals.ini file is in your TestStand Config directory, which is found at <TestStand Application Data>\Cfg.
On Windows 7, this is C:\ProgramData\National Instruments\TestStand 4.2\Cfg. I don't remember off-hand what the exact path is on versions of Windows earlier than Vista... Somewhere under C:\Documents and Settings\<Username>\. You can just search for StationGlobals.ini if you need to. -
I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please helpCR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras -
I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please help.
This link shows that ACR 8.3 supports the Nikon D610 and 6.7.1 was the final version for CS5.
Camera Raw plug-in | Supported cameras
So you can upgrade to CS6 and ACR 8.7.1
or using the DNG converter, convert your Nikon raw files to dng format to open in CS5.
Here is the download link: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
or Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
And here is a great video tutorial on how to use the converter.
https://www.youtube.com/watch?v=0bqGovpuihw
Gene -
i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.
You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0. -
I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.
How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality. -
Firefox always opens with a different URL than listed in the settings option, why?
The homepage in the settings option of the firefox browser has been set to www.google.com.
However it always opens with https://www.google.com/?gws_rd=ssl.
Why?
Please advise!
Thanks.Hello,
Don't worry, this should not cause any problems. Side to side, the sites look the same, just in the link it goes to it activates SSL security (That's good) -
Where is the "stroke options panel" in Photoshop CS6?
Where is the "stroke options panel" in Photoshop CS6? It used to be right above the layers palette in older versions of Photoshop but now it's gone. I'v been trying to find it for an hour and a half and it doesn't seem to be in any of the menus.
If you're looking for the Stroke options of a layer, you can find that by clicking the layer you have a stroke on or wish to have a stroke on, and then clicking the fx icon in the bottom of the layers panel:
And it will open the Stroke options for that layer.
Another option is by clicking Edit at the top menu, and then choosing "Stroke..." (make sure you have a layer selected).
It will then bring up a window with Stroke options on it for that layer:
I hope this helps! Let me know if you need further assistance! -
what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"
It can be that you have an old version of Photoshop Elements and a new camera.
Please tell us
Which operating system you are running on
Which version of Photoshop Elements you are using
Which camera the raw images come from (Make & model)
Brian -
I have an Ipad2 and my daughter has Iphone 4s and I would like to have all SMS and IMessages duplicated on the IPAD2 I was told I could do this by typing in the mobile phone number into the IPAD2 some where in the settings.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Where is the letterbox option in iMovie?
where is the letterbox option in imovie?
What version of iMovie?
The latest version only handles video in 16:9 apect.
Maybe you are looking for
-
not able to set security group without mail enabled as site collection admin using powershell in sharepoint online site - office 365? Any idea?
-
HPE 180T - Video driver stopped responding - the screen is pixilated and barely legible.
My HPE 180T core dumped and when it restarted the screen was pixilated and barely legible. I could make out a message "Video driver stopped working and has recovered". I am not sure how to reinstall the driver (Windows 7 64-bit OS), since it is ver
-
Hi experts, The client is looking for a solution to record the down payment for asset. They are basically looking to the following. 1. create PO with account assignment 'A' to the asset for the full amount 2. process the down payment in AP, using sp
-
In house apps refusing to start
Hi Everyone, Crazy situation. Users are installing the iTunes on the machines as instructed. The users are using the applications as instructed, but when they connect the device to the machine with iTunes, and restart the applications on the iPod tou
-
IDOC - Problem booking CLFMAS idoc for kna1 (customers)
Hello, currently im working on data migration using the lsmw transaction. My project is to add the classifcation using the message type CLFMAS to customers in kna1. Every time im trying to process the idocs it fails with error: "Object 0000010035 (K