Where is the spanning widget on control panel indesign cs5.5

Hi, I am just learning Indesign CS5.5 on a Macpro using Lion X. I have been going through the tutorials and in listening to the one on spanning and splitting columns the narrator makes reference to a Spanning widget on the control panel. My program does not seem to have this widget, and when I did an search it just lead me back to that tutorial as the only mention of a spanning widget.
I tried going to Help but that only led me to What's New articles which is no help because since I've never used Indesign I have no frame of reference for what is new!
So, I am concerned that your tutorials will continue to be frustrating to me because of references to controls and commands that don't exist.
My question remains, Where do I find the widget mentioned in this Adobe Indesign turorial?
http://tv.adobe.com/watch/learn-indesign-cs5/spanning-and-splitting-columns/

You must have your cursor in text, then choose Paragraph mode (P symbol chosen on the left side of the control panel.
Then look for this:

Similar Messages

The download of icloud control panel v2.0 does not work. I have no box to check for calendar and contaks. Whats wrong?

The download of icloud control panel v2.0 does not work. I habe no box to check for calendar and contacts. Whats wrong?
Thanks Chris

Hi, I came across the same problem and was not able to open any iCloud folders on Outlook, and iCloud was continusly asking to repair the iCloud Control Panel. Got the issue fixed by following the steps on the link http://somanytips.com/fix-icloud-error-repair-the-icloud-control-panel-to-use-ic loud-with-outlook/

Does Firefox change the installation date in control panel when they upgrade?

I installed Mozilla Firefox in early September. 6 weeks later I noticed the installation date for Firefox in control panel had changed from September to October (appeared as if it had been uninstalled and reinstalled). I uninstalled it, and reinstalled it, and I noted the date of installation, October 18. I kept an eye on it. November 5, I checked the control panel, I noted the installation date had changed again, to November 1. Now my dates may be off a day, but is it normal for Firefox to change the installation date when upgrading, and even more disturbing, is it possible to do it without the user knowing it's being done? And remotely?

Each time you update any program, you install it. The installation date in Control Panel will therefore update accordingly. This happens when the installer runs on your system: there's no remote interference involved.
By default, Firefox updates automatically. The setting is found under Options - Advanced - Update. If you click the Show Update History button there, you'll no doubt find Firefox was updated on November 1st.
* [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption]]

HT1846 I can't locate the Quick Time 7 control panel to input my Pro code

I have Windows Vista and downloaded Quick Time 7. I just bought the Pro registration code to upgrad to Quick Time 7 Pro. Apple explained to go into my Vista OS control panel to access the Quick Time control panel to plug in the purchased code, but its not there. I see icloud in there , no Quick Time. I checked out the other locations where Quick Time files are but still can't locate it. Been at this for a couple hours. Can anybody help?

Whenever I log into icloud.com
Using what version of which browser?
iCloud.com requires Safari 6 or later, Firefox 22 or later, or Google Chrome 28 or later. Have you tried all of those?
If you have, have you tried clearing your browser cache and cookies?
For the first tine since 1989 I'm thinking about buying a PC.
You'd have exactly the same problems on an 8 year old PC too. It's a bit unreasonable to expect such an old Mac to continue to be compatible as software is constantly updated.
Saying that, I'm still able to access iCloud.com successfully in Safari v5.0.6 on a PowerPC Mac running Mac OS X 10.5.8, so the problem you're having is likely to be a browser issue, not something inherently wrong with the computer.
Since all this crap started, Mail won't download my Mac.com or me.com email.
The iCloud.com website is totally unconnected to Mail's ability to download email via IMAP. Have you checked the mail server settings are correctly setup and up-to-date?

How do I change the defualt grey scrollbar and the grey movie player control panel?

How do I change the defualt grey scroll bar sliders and the grey control panel for the movie player using Dreamweaver. Is there a way to change the color of these items using CSS?
Any info would help.

I have not had to write any code yet.
Well that's going to have to change. :-))
For Windows Media, set the autostart attribute value to "false" and "0"
http://www.mediacollege.com/video/format/windows-media/streaming/
If you can convert your WMV and FLV files to MP4s, you'll have video that can be viewed in all modern browsers plus Smartphones.
http://www.pickleplayer.com/index.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Where are the Brightness and Levels controls?

It's so simple, but it's late at night (early hours of the morning actually) and I'm stuck!
The most basic of controls . . . . Brightness, Contrast, Levels etc. I just cannot find.
Where are they?
Anyway, I'm off to bed.

Looking back to the old FCP, the Brightness filter was pretty appalling as it really upset the contrast etc. and it required complex fiddling with the other controls to get a semblance of balance back.
Then a year or so ago someone made a new free Brightness plugin that not only adjusted the brightness but automatically compensated the contrast controls so everything looked great.
I can't remember the name of the creator or the plugin.
It might be Luca and this, but I can't be sure.
http://www.videonline.co.uk/Lucas_Image_Adjust.htm
It's a pity that FCP X hasn't got a similar effect.
The following adjustment gave the images a nice lift and kept everything pleasant to view.
Highs +10%, Mids +5% and Shadows +3%
Message was edited by: Ian R. Brown

Where is the iTunes Widget in Mountain Lion?

On the Apple website, it states there are several pre-installed widgets with Mountain Lion, including the iTunes widget (http://support.apple.com/kb/PH11233). However, when I open the dashboard, I cannot see the iTunes widget that I used to use all the time on Snow Leopard for playing iTunes songs/playlists etc...
I was able to download the iTunesTan widget from the Dashboard Widgets page of the Apple site (http://www.apple.com/downloads/dashboard/?r=dbw). It works in a similar way, but what about the Apple version, is that still available?

Having done a bit more digging online, it seems that the iTunes widget was discontinued as of Lion. I intend to contact Apple Support to confirm this... but for now, it seems the closest thing to the iTunes widget that actually works on Mountain Lion is the "iTunesTan" widget.
This link provides a second link to a download of the iTunes widget taken from Snow Leopard: http://apple.stackexchange.com/questions/19088/how-do-i-get-the-itunes-play-cont rol-widget-back-in-dashboard
If you have backups of a Snow Leopard system, you can also get a copy of the widget from your backup... but I have done that on Mountain Lion and the widget fails to work, so unfortunately the iTunes widget appears to be obsolete as of Mountain Lion.

How can I increment the label of a control panel?

I would like to place data into several controls in one panel. These controls are labeled CTR_0 through CTR_63 . I would like to use a function like:
int value[64]
for (x=0; x<64; x++)
SetCtrlValue (panelHandle, PANEL_CTR_x, value[x]);
Anyone have an idea short of setting each one on a seperate line?
Any help would be appreciated.

When I have a larger amount of equal controls (e.g. channels), I usually
place only one of the controls into the .uir file, and then build the
remaining controls programmatically in a loop, using the DuplicateCtrl()
function. The advantages are, that I can set (and change) the control
attributes (position, size, label, colors, callbackfunction ... ) only at
one place in the .uir file, and besides I can store the control ids in an
array from where the controls can be easily accessed.
digOutPanel = LoadPanel (0, "DigitalPanel.uir", DIGO_PANEL);
/* buttons for digital outputs */
GetCtrlAttribute (digOutPanel, DIGO_PANEL_SETOUT, ATTR_WIDTH, &width);
GetCtrlAttribute (digOutPanel, DIGO_PANEL_SETOUT, ATTR_LEFT, &left);
digOutSet[0]=DIGO_PANEL_SETOUT;
for(
i = 1; i < MAX_DO; i++)
sprintf(buf, "%02d", i);
digOutSet[i] = DuplicateCtrl (digOutPanel, DIGO_PANEL_SETOUT,
digOutPanel, buf, VAL_KEEP_SAME_POSITION, left + (width+2)*i);
Regards,
Manfred
zener schrieb in im Newsbeitrag:
[email protected]..
> I would like to place data into several controls in one panel. These
> controls are labeled CTR_0 through CTR_63 . I would like to use a
> function like:
>
> int value[64]
>
> for (x=0; x<64; x++)
> SetCtrlValue (panelHandle, PANEL_CTR_x, value[x]);
>
> Anyone have an idea short of setting each one on a seperate line?
>
> Any help would be appreciated.

Where is the frame rate setting control when making a slide show?

I am trying to make a slide show using QuickTime Pro and cannot find the frame rate control.I put all my consectively-numbered jpegs in one folder. I then clicked on "File," the "Open Image Sequence," then a window opened up and I click on the first jpeg in the series of photos I want in my slide show. Then the first image appears in the QT Window. The instructions next say that I should be able to change the rate at which each slide/jpeg appears, but it doesn't tell you where to find the "frame rate" so I can change it. It doesn't appear at all on its own, so where is it? Anything else I'm missing? Thank you.

barbaric135
What version of Photoshop Elements and or Premiere Elements are you using and on what computer operating system?
In addition, could you please clarify?
It sounds like you are creating your slideshow in the Elements Organizer. Where are you seeing these distortions and blurs, in the Elements Organizer Slideshow Editor Filmstrip or in the Premiere Elements workspace after you have transferred the slideshow from the Elements Organizer 9 Slideshow Editor to Premiere Elements workspace?
What are the pixel dimensions of the photos in this slideshow and how many of these photos are in the slideshow? What format are they in..jpg, psd, other?
With regard to what you wrote:
Also how do I transport them from Elements to Premier, it has a tab to do that but when I get to the elements file I don't know where to drag and drop into.
If you are in the Elements Organizer Slideshow Editor and use the Output option Edit with Premiere Elements, then you would expect the automatic transfer of the slideshow to Premiere Elements, with a copy in video format (.psess) in the project media as well as on the Timeline. Nothing for you to drag and drop.
For all those reasons, I am asking for clarification.
Thanks.
ATR

Repost: Where is the Weather widget in the iOS 7 Notification Center?

I will award ten points to a verified "no" or "yes" with a brief explanation how to enable.
I understand it is not a full widget, but that's what Apple used to call it in iOS 5 and 6. Anyway, let me give more information. I cleared all of my notifications. This means that the All and Missed tabs are completely empty. Swiping to the left and right just brings me to these empty menus. I have everything turned on except for Stocks in the Notification Center. My "Today" view consists of Today Summary, Calendar Day View, and the Tommorow Summary tab at the very bottom. There is no mention at all about Weather at all in Settings>Notification Center, which leads me to think Apple just dumped this feature. Can anyone verify this?

The Weather is still there. Make sure the Weather App is allowed access to Location services.
Settings->Prvacy->Location Services->Weather.
Then Open the weather App to generate the Weather for your current location and it should appear in the Today tab under the date.
Its a Text Blurb now with no images.
http://photos.expertreviews.co.uk/images/front_picture_library_Expert_Reviews/di r_389/er_photo_194794_52.png

Where are the selfmade widgets located? esp. the web clips

I would like to locate the web clip made widget in the files so I could delete them when I wanted to. Anybody any idea?
thanks

They are located here:
~/Library/Preferences/widget-com.apple.widget.web-clip.plist

Where are the other Widgets?

Let's face it, iPhone is not a real business tool. I don't need that stocks widget. Weather, great. Maps, great. YouTube, cool. But, what I need is sports scores and movie listings widgets, where can I get them?

There are no widgets for you to download to your phone. There are web apps that look like widgets, some very cool (like movie listings, detailed weather radar, etc.)
http://iphoneapplicationlist.com

Where are the registry settings to control the Updater preferences?

I need to adjust the automatic updater preferences of multiple alreday installed instances of Acrobat 9, I would like to set the registry settings with a GPO.

Bueller... Bueller

How can i use shape tweening and motion tweenin together on a movie clip?(where is looping whitch was in propertise panel in CS5?)

how can show animation (shape and motion tween) witch i was created in Scens1-MovieClip in time line?
there was an option (looping) in CS5 but how can i do it in CC and CS6?

shape tweening can only be applied to raw drawn shapes, no movieclips. IF you wanted to do a shape tween to a movieclip it would have to be done within the timeline in the movieclip.

Where is the link for download of 64 bit CS5?

I've hunted all over the Creative Cloud looking for the proper link to download the 64 bit version in order to upgrade from 32 bits. It's so simple to read "Download the 64 bit version from Creative Cloud" and nearly impossible to find the link!

Sign in to your Adobe account online and look in the Plans/Products sections to see which program it might have been.

Where is the spanning widget on control panel indesign cs5.5

Similar Messages

Maybe you are looking for