Where is the stroke?

in this tutorial : http://angelsgrafica.forumfree.it/?t=30892165 there is written: "Clicchiamo 2 volte sul livello della scritta
Andiamo su Modifica-----> traccia": We click 2 times on the level of written ----- Let's go to Edit> Stroke how can I do it in PS ELEMENTS?

It means this:
Click 2 times on the text layer and go to Bevel and Emboss (Bevel and collection). Set like this: (and then there's a stamp)in which sense do a selection? a selected everything but after, when I open the Edit Menu it doesn't gove me the option you said!

Similar Messages

Where is the "stroke options panel" in Photoshop CS6?

Where is the "stroke options panel" in Photoshop CS6? It used to be right above the layers palette in older versions of Photoshop but now it's gone. I'v been trying to find it for an hour and a half and it doesn't seem to be in any of the menus.

If you're looking for the Stroke options of a layer, you can find that by clicking the layer you have a stroke on or wish to have a stroke on, and then clicking the fx icon in the bottom of the layers panel:
And it will open the Stroke options for that layer.
Another option is by clicking Edit at the top menu, and then choosing "Stroke..." (make sure you have a layer selected).
It will then bring up a window with Stroke options on it for that layer:
I hope this helps! Let me know if you need further assistance!

Where is the stroke panel?

Using CS4 on a Mac. Says go to Window--> Stroke Panel. Ain't no such thing. No panel. Nada. Not there. Gone.
Can anybody tell me where it is?

Odd that it would have that instruction.
The stroke properties are set in the Properties panel. In CS3 they're the third set from the left.

[JS/CS4] What's up with the Stroke Styles?

Pondering the possibilities of Marc Autret's fantastic ScriptUI Image Injection trick (
get swatches in dropdown list with color preview... ) I wondered if it was possible to do something a bit more complicated -- a Stroke Style dropdown, with a custom image per stroke style (dashed, dotted, striped), just like the Real Thing. But ... I'm stopped dead in my tracks by one simple nagging problem. Where did the stroke styles go?
According to my documentation, both Application and Document should have a strokeStyles property, listing all of the available stroke types, and separated dashedStrokeStyles, dottedStrokeStyles, and stripedStrokeStyles properties, to gain access to each of the separate types. However, *all* styles report their length as "18" and can give me their names but nothing else (dashArray, for example, fails on non-dashed strokes and returns nothing at all for the dashed ones). And the separate lists all seem to have a length of 0. And all of the strokes' "strokeStyleType" ought to return a useful descriptor name but return "" (empty string) instead.
alert (app.strokeStyles.length); // 18
alert (app.stripedStrokeStyles.length); // 0!
alert (app.dashedStrokeStyles.length); // 0!
alert (app.dottedStrokeStyles.length); // 0!
Is this my InDesign Gone Bad?

function(){return A.apply(null,[this].concat($A(arguments)))}
As far as I know, those 18 styles are built-in styles. You can't delete them, edit or whatever...
Sure -- but I was hoping to at least see them in a script! It seems I cannot read *any* property out of them ??

Why doesn't the stroke width tool create smooth curves?

Am I the only one who has edited a stroke with the stroke width tool, then outlined the stroke only to find a countless number of points and noticeably unsmooth edges? Is there a setting or certain way to ensure that the stroke width tool won't corrupt the smoothness of my shapes? The stroke width tool is the most handy new feature I can imagine, but this problem makes it almost entirely useless, unless designing something where precision and smoothness are not important. What can I do?

...Am I the only one who has edited a stroke with the stroke width tool, then outlined the stroke only to find a countless number of points ...
I also have noticed that too, for example using the width tool with the same width on all points and expanding on open path results in a lot more anchor points than expanding the same path with the same weight or offset.
... and noticeably unsmooth edges?
I haven't noticed that yet but creating paths with smooth anchor points are more smooth when created with less points, at least when I do it manually but if I use Object > Path > Add Points, or just click on a path to add points, I don't see loss of smoothness.
Is there a setting or certain way to ensure that the stroke width tool won't corrupt the smoothness of my shapes? ..
I'm not aware of such settings
... The stroke width tool is the most handy new feature I can imagine, but this problem makes it almost entirely useless, unless designing something where precision and smoothness are not important. What can I do?
I don't know what your precision requirements are, may be an image example of what you are trying to achieve and what you are getting will help understanding you better but so far I haven't considered this as a problem and have used the width tool a lot in my work.

Varying the stroke colour used in a section of a closed path.

Hi
I'm using Illustrator CS6.
I'm working with closed paths on an illustrated character. I have a leg overlapping a body for example. The leg is essentially a 4 sided shape but I only want a stroke on 3 sides. On the 4th side I don't want a stroke on it so that the leg blends with the body. I first thought about using the shape builder tool to merge the 2 shapes to see what that would look like but they won't merge for some reason. Can't see why from the help.
Then I tried to use the width tool to drop the stroke on the 4th side down to a 0 width for the side I want ... but that didn't work either.
Can anyone tell me how I can change a closed shape so that a section of the shape has a different stroke colour (i.e. none!) from the rest of the shape? All ideas gratefully received.
Arisaig67

Hi Everyone
Thanks for the tips to date. I'm going to mull some over, some I've already tried. Note to self - it would have been helpful if I had posted a rough example to illustrate from the outset. So here's one now and a summary of where I'm at. This is a crude example showing my scenario. Jacob's right in that I want the leg on top of the body with the strokes showing.
To have a closed curve, I understand that I have to close the top of the leg off (red line here)? (I'm still quite new to illustrator but have used other packages before). I ideally want to keep the leg separate as I find that easier for using draw inside and using the feathering effect for creating shade and light. However I don't want the top line to actually appear. Since I don't know how to close but not have the top line, I have in earlier examples been clipping and joining the curves where it connects with the body as per earlier suggestions. In this case, with the "jutting out" part of the leg above the body line now essentially a line, rather than a shape. However that's disadvantageous for light and shade as I can't then use the draw inside so accurately for shading on the leg if it becomes one with the body (draw inside compensates a little for my hamfistedness with the tablet!).
I may be banging up against a limitation in illustrator but rather than flounder in my ignorance, I decided it was better to find out once and for all from the collective genius and experience of the illustrator community! My developing sketching skills may alse be limiting the avenues I am trying to explore, so thanks to date for the differetn suggestions that have already expanded my perspective!
When I get home tonight I'll try the suggestions I haven't tried yet and report back.
As for shape builder - I don't know why it's not working. I'm following the same steps as when it does work for me! draw inside is the same - some times it works, sometimes it doesn't and I haven't differentiated why yet. I know draw inside needs just one shape selected but sometimes even that doesn't work. I need to interrogate my stuff more closely. it's a crazy, parrellel learning point ride with illustrator but loving every minute of it!
thanks again!

Automatically set the stroke color as fill color

Hello all,
I have a file with two squares with red and blue fill colors respectively and transparent surrounding strokes. I'm trying to find a way to automatically set the stroke color of each square to the respective fill color.
Is there an Illustrator script somewhere that would achieve that? I am not aware of an internal Illustrator command for this purpose.
Thank you

I'm not a scripting guy at all, but getting an object's fill color and applying it elsewhere sounds like it should be scriptable. You should post the question in the AI Scripting Forum.
The hitch I see here is your assertion that your objects have "transparent surrounding strokes." I could be wrong, but I believe there is actually no such thing in Illustrator. Through some simple experimenting, I conclude that an object's stroke set to "no color" by choosing the blank swatch actually becomes a stroke of undetermined, or perhaps zero, weight.
Take an object with a stroke color and weight and set its stroke to no color. The weight goes away as well. One can't exist without the other, and vice-versa, with repect to stroke weight and color. Now enter a weight for that colorless stroke, and it again receives color; defaulting to black regardless of what it may have been previously.
Similarly, if you assign a color where there is no weight, a 1-point weight appears by default.
I'm not sure how/if that plays into your plans, but I just thought I'd ramble on about it here in case it's something you hadn't considered.

Why do the strokes around my frames load slowly online?

I have a website: www.libusedesign.com that I built in iWeb. A few questions:
1. Why do the strokes around my little boxes take forever to draw online? (see website to see what I mean). The photos in the boxes are that size, lo-res JPGs (they are not too big). So, why is this? Is there a way to fix it?
also...
2. If I put a "shadow" on something in iWeb, it does not show when online. (and I am using the latest browers...firefox, safari)
3. In this particular website, in my navigation bar, I have to make the text off center vertically to make it appear online correctly. If I have it set right where I want the text to be in iWeb, it appears off when online, therefore, I have to make it look bad in the iWeb program, just to make it look correctly online. Why is this?
Thanks

Try both and then download and run GraphicConverter in the demo mode to see what reduced file size it can create with both formats that will look good.
Another method is to use the jpg format and use the freeware Resize! to resize it with the following settings:
*JPEG Quality* = experiment with several to see which will give the smallest file size and acceptable quality
*Proportional Resizing* = 100 Percent - this will keep the image size the same.
I've seen some background images resized with the quality set at 20 (low) that looked as good as the original. However these were patterned images and might be too low for your use. That's why you can experiment with the quality level and see what size is acceptable.
OT

Subtracting the stroke outside the rectangle.

I've got a stroked rectangle and I want only the stroke inside the rectangle to show.
The bottom layer has the stroke over the fill.
The top layer is a duplicate of the bottom layer, except that the fill is black, the fill is over the stroke, and the layer mode is subtract.
Everything looks perfect, EXCEPT there is a thin (one pixel?) line on both the right and left side of the rectangle (where the outside of the stroke would be).
Why are those two thin lines there? Does it have something to do with antialiasing? How ought I make that work right?
Is there a better way to do it?

This will only work if your rectangle is an even number of pixels high and wide and the anchor point is on a whole pixel value. Otherwise you get into sub pixel sampling. You can mitigate the errors by changing the blend mode to Alpha Add for both layers.
If that suggestion does not fix your problem we need to know a lot more about your project. How are the rectangles created? How is the stroke created? I'm assuming you are using Shape layers. If this is correct then my suggestions should work.

HP LaserJet Enterprise 500 551dn - where did the drivers go?

I go to the download page to download the drivers for this 551dn. I download all windows 7, 8, 8.1, 2008, 2012, so that i can put them on my print server. I downloaded them from here..
<http>//h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5081348&lang=en&lang=en&cc=lamerica_n...
when i get the file, lets say for windows 7/64bit, i choose...
HP LaserJet Enterprise 500 color M551 Printer Series PCL6 Print Driver (no Installer) 61.130.04.12834
24 Sep 2014 21.3
I get the file downloaded (LJEnt-color-M551-Drv-no-installer_12297.exe), i run it, get the security warning and Run. the file extracts - then POOF, the installer is gone.
where did the files go? They aren't on the root of the C: drive, a folder/files were not created on my desktop, no files or folder created in my downloads folder.
I was never asked for a file save location.... ??? really? is this this basic stuff?
Where are the files? this $$$ printer is a brick until i get drivers!
Thanks!
Jason
UPDATE- I FOUND THE FILES!!
First of all, HP... i'm not impressed.
All the files for all the drivers are in a series of temp folders...
C:\Users\-myusername-\AppData\Local\Temp\3\7zS4A73
really?
hope this helps someone.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

Sometimes I can't get out of Day view in iCal. There is no where on the screen to select month view, even when I close it out and go back into iCal.

Sometimes I am locked in "day" view in iCal. There is no where on the screen to choose "month" view, even when I close it out and open again. Tapping anywhere on the screen or scrolling doesn't help.

Give this a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try full screen again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Where did the Stream 7 drivers go?

The support page for downloading drivers for the HP Stream 7 tablet (any model) has disappeared from the HP website.
Navigating to the HP Stream 7 support page, Selecting "Software and Drivers", then "Go directly to software and drivers page", Operating System "Windows", then Version "Windows 8.1" (the only choices), then clicking the Update button, gives a message "No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product homepage. " This happens using Firefox, IE 11, or Chrome.
These drivers have been missing for at least a few weeks, and multiple forum users have also had no luck finding them. Before that time the drivers seemed to come and go randomly, but they've stayed missing now for weeks. One dorum user has posted direct FTP links to the drivers, and they might be the latest version, but not really sure.
Where did the drivers go, HP?

This is for the 5701 as of a few days ago.
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69307.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70275.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70340.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70339.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70337.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69308.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69305.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69309.exe

How do I figure where is the data in a materialized view coming from

Hi: when I run select NAME, OWNER from dba_mview_refresh_times, I see a number of materialized views. How do I find more details about this view i.e where is the data coming from and which fields. The source table that is in another database changed. But the view on my database where the materialized view exist has not changed. I want to confirm from where is data coming in this view
TIA
Ravi

SQL> select * from dict where table_name like 'ALL%MVIEW%'
TABLE_NAME                     COMMENTS
ALL_BASE_TABLE_MVIEWS          All materialized views with log(s) in the database that the user can s
                               ee
ALL_MVIEWS                     All materialized views in the database
ALL_MVIEW_AGGREGATES           Description of the materialized view aggregates accessible to the user
ALL_MVIEW_ANALYSIS             Description of the materialized views accessible to the user
ALL_MVIEW_COMMENTS             Comments on materialized views accessible to the user
ALL_MVIEW_DETAIL_PARTITION     Freshness information of all PCT materialized views in the database
ALL_MVIEW_DETAIL_RELATIONS     Description of the materialized view detail tables accessible to the u
                               ser
ALL_MVIEW_DETAIL_SUBPARTITION Freshness information of all PCT materialized views in the database
ALL_MVIEW_JOINS                Description of a join between two columns in the
                               WHERE clause of a materialized view accessible to the user
ALL_MVIEW_KEYS                 Description of the columns that appear in the GROUP BY
                               list of a materialized view accessible to the user
ALL_MVIEW_LOGS                 All materialized view logs in the database that the user can see
ALL_MVIEW_REFRESH_TIMES        Materialized views and their last refresh times for each master table
                                that the user can look at
ALL_REGISTERED_MVIEWS          Remote materialized views of local tables that the user can see
13 rows selected.

What/Where is the Value Lifecycle Manager (VLM)

What/Where is the Value Lifecycle Manager (VLM)
I was just reviewing an ASUG presentation from Soledad Alvarado Ganzhorn of SAP NetWeaver Product Management at SAP Labs. It describes a value lifecycle manager tool that includes:
&#56256;&#56457;Value Discovery content includes: Interview Questions, Pain Points, Best Practices, Solution Enablers, Value Drivers & KPI's, and Data Requests
&#56256;&#56457; A Knowledge Management Platform Retrieve and Enter content
&#56256;&#56457; A Highly Flexible and Customizable Business Case Building and Reporting Platform
&#56256;&#56457; Used by Value Engineers, Solution Engineers, ISG, Partners and others
Is anyone aware if SAP is using this tool already? Will customers get access to it? This sounds like a replacement for the business case builder which I haven't seen either. It would be nice if customers had access to these sorts of discovery tools. Since we don't utilize SAP consulting, we are often not able to access this content as we initiate new initiatives. It would be nice to have access as it seems like we are internally selling their software for them.

The tool is available. It is at the following URL:
https://sapvalueengineering.com/VLM2/client.page
SAP has nominated select Partners that have access to the tool. You can probably check with the SAP partner relationship manager in your organization to see if you have access to this tool.

Photoshop CC video: Where is the audio flyout menu? I want to set the audio level of a clip but when I click the little triangle the flyout only offers Motion options, no audio.

I created a video clip by ripping from a (non-protected) DVD & brought it into Photoshop CC for editing. I want the audio to fade in & out but cannot find any audio controls!
The info I've found online says to click the little triangle at the right end of the clip & I should get the audio flyout menu, but all I get is a menu with "Motion" options.
Please help!! Where are the audio options I see on the tutorials?
Thanks ...

The audio was indeed in there; I could hear it! But I found the fix:
Some Googling revealed that the timeline video sprites should appear *blue*, not purple as in my screenshot. I'm not sure how that happened, but I scrapped the project & restarted from scratch - and though I can't say what I did differently, this time the video sprite in the timeline was blue, and the audio flyout was there! So it's all good, thanks!

Where is the stroke?

Similar Messages

Maybe you are looking for