Where is the structure of items stored?

Hello all,
I have created a content area in which users can only add URL items. The general idea behind this is to end up with a treeview displaying websites in categories.
Until now I have found almost all information I need: the content area details are stored in wwsbr_all_content_areas, and the details for the URL can be found in wwsbr_all_items and wwsbr_url$.
But how can I find out the order in which they are displayed in the content area? And how do I know which items are subitems of which? I've already had a look at the masterId's but I can't seem to find a link.
Thanks in advance,
Joey

I found the content area ITEM relationships defined in a table called portal39.wwv_things and the following query shows how to determine the relationships of determining content_area/folders/categories:
select a.title, a.id
from PORTAL30.wwv_things a,
PORTAL30.wwsbr_siteS$ b,
PORTAL30.wwv_corners c,
PORTAL30.wwv_topics d
where a.siteid=b.id
and a.cornerid=c.id
and a.topicid=d.id
and b.name = 'CONTENT_AREA_NAME'
AND C.NAME = 'FOLDER_NAME'
AND D.NAME = 'CATEGORY_NAME'
AND ITEMTYPE in ('file')
and HIDEINBROWSE = 0
AND EXPIREDATE IS NULL
Hope this helps.

Similar Messages

  • Where is the server configuration data stored?

    Where is the server configuration data stored?
    <P>
    The data is stored an ASCII file named server.conf
    . This file is stored in
    the config directory on the same server-root as the iCS 2.0 binaries. The
    format of the server.conf
    file is described in detail in the Administration
    Guide.

    Try to read
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
    UME user data is stored in one or more data sources. Each type of data source has its own persistence adapter. The persistence manager consults the persistence adapters when creating, reading, writing, and searching user management data. Persistence adapters for the following types of repositories are available: 1. Database: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which databases are supported. 2. u2022 Lightweight Directory Access Protocol (LDAP) directory: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which directories are supported. 3. SAP Systems based on Web Application Server 6.20 You can configure UME to use one or more of these persistence devices in parallel. Users can also be stored in several different physical LDAP directory servers, or in different branches of the same LDAP directory server.

  • Where is the "apps" menu item in the new iTunes interface?

    Where is the “apps” menu item in the new iTunes interface?  I can no longer transfer files from my PC to my iPhone.
    I just downloaded and installed the updated iTunes for my iPhone.  I cannot find the “apps” menu item anywhere.  How can I continue to download various types of files FROM my PC (Windows 7) TO my iPhone?  I previously did this by clicking on the “apps” menu item and going from there.  I cannot find the “apps” anywhere on the new iTunes.  Thanks.   

    Tonefox, no it's not under "Music" but I did some more digging and found where Apple has "hidden" Apps on their latest iTunes for PC.    You need to click on "iPhone" (upper right menu item) to display more menue items, of which Apps is one of them.  When I had clicked on "iPhone" before, I mistakenly closed the the iPhone option from view because I clicked on the up arrow next to iPhone, instead of just iPhone.  Once you click on iPhone, the options look similar to what they did in the earlier version of iTunes and you can easily find Apps.

  • Where is the log in item tab? i cant find it !

    where is the log in item tab?? i cant find it.cant install my itunes helper without going through it .urgent .need an answer as fat as possible .

    As of CC 2014 the filter no longer exists. Several features were removed, some had to with flash as Adobe is supporting html5 over flash. It can still be used in CS6 and CC

  • Where does the supporting deatil is stored? in Planning or Essbase?

    Where does the supporting deatil is stored? in Planning database (RDMS) or Essbase database?
    Appreciate if u could reply ASAP.
    Thanks in Advance!!

    Supporting details are stored in Planning Applications RDBMS. check out HSP_COLUMN_DETAIL and HSP_COLUMN_DETAIL_ITEM in the application relational database
    Re: Refresh Database
    I can see 6 question and all are unresolved, Mark the answers if you think they are correct or helped you and close the thread.
    Cheers..!!
    Edited by: RahulS on Jun 21, 2011 3:58 PM

  • Where are the users startup items physically located?

    Hi all
    I messed around with my login items as I had a startup problem (very slow startup). I 've deleted the Microsoft AU Deamon, now I want to reinstall it from a backup - but where is the thing???
    Where are the users login items physically located?
    Thanks
    Simon

    Where are the users login items physically located?
    The physical login item process could be located any where. Your ~/Library/Preferences/loginwindow.plist initiates login applications or processes.

  • I have an iMac, where are the completed print jobs stored on the iMac and what format are they?

    I have an iMac,  where are the completed print jobs stored on the iMac and what format are they?
    My OSX is 10.10.1

    Hi
    If you are using standard system or HP drivers, than the jobs contents are not saved at all.
    You can see the list of completed jobs per printer via this URL: http://127.0.0.1:631/printers/
    If you want to save a print job, you can do it in the print dialog, by selecting an action prom "PDF" popup.
    It allows to save a job (prior or instead to printing it) as PDF or PostScript.

  • Where is the printer configuration info stored?

    I need to configure printing for a whole lab, and while I can configure an individual machine for one user via the Print/Fax option of System prefs, I can't find where all that info gets stored (some of it is in ~/Library/Preferences/com.apple.PrintingPrefs.plist, but not all) and I can't figure out how to slide that in as a whole-system configuration. Where is the per-user information stored, and where can I move it so that it applies system-wide?

    The printer queues are global so most of the information is not kept under any particular user. The path you mentioned keeps user relevant information, such as Presets.
    If the printers are using files that are included with 10.5, then the majority of compressed driver files are kept in ./Libary/Printers/Vendor or ./Library/Printers/PPDs/Contents/Resources/en.lproj for PostScript PPDs.
    When you add a printer queue, some of the information is kept in ./etc/cups. This includes the printers.conf file which has details about the added printer queues and the decompressed PPD that was selected during the queue creation.
    So if you are looking at copying the data from one Mac to reduce your setup on all the other Mac's, then you may have to tell us the make and model, as there could also be a number of additional directories/files you need.
    PaHu

  • HT4867 Now that I've switched to  ICloud where are the mailboxes that were stored on my Mac?

    Now that I've switched to ICloud where are the mailboxes that were stored on my Mac?

    On your mac, mailboxes are listed under one of several categories.  Some are "on my mac" and others are in "icloud".  Those emails in mailboxes "on my mac" are strictly local, they do not connect with iCloud.  As Julian points out, all mailboxes on your mac are still there.  They will not be on your other devices.

  • When I import files (copy from jpeg or copy as DNG from raw, where is the full size original stored?

    I have the photos go here file, does LR5 put the untouched original there? Do I need my own file for originals and if so, how does LR5 know where to find the full size original? I have everything working but don't understand where my untouched originals go after import. Say I import off my card to My Pictures/Lightroom Catalog/ Photos go here ..... are my originals there? What if I erase my card now, do I only have partial size negatives basically? I don't understand why LR5 didnt put in an originals do here file that imports the full photo to a stock folder. I am so confused I am about ready to throw out LR5. I even bought your instructional DVD and it doesnt make where the original files location clear, it just repeats that LT5 does NOT import the original, just thumbnail and instructions, where is the program getting the photo when I double click to open it , or am I only seeing a lower resolution version of the photo and the full res is now gone because I formatted the card?

    When you import photos, you can choose "Copy" or "Move" or "Copy as DNG", and then select a destination folder on your hard disk. This happens on the right hand side of the Import dialog box. So your original files go to this destination folder.
    Alternatively, if your photos are already on your hard disk, you can import by choosing "Add" and the original photos remain in the existing location.
    If you're not sure where the photos are, open Lightroom, go to the Library Module, and on the right hand side is the Metadata Panel. Set the dropdown to "Default", and it will show you where your photos are stored. Alternatively, you can right-click on any photo and select "Show In Finder"/"Show in Explorer" and Lightroom will take you to the exact folder where the photo is located.
    So, bottom line, you are in total control of where the originals go, and if your forgot where you put them, or made a mistake, you can always find out where they are.
    What if I erase my card now, do I only have partial size negatives basically?
    If your import was successful, then the photos are now stored on your hard disk. So you have the full size original for Lightroom to work with.
    it just repeats that LT5 does NOT import the original, just thumbnail and instructions
    Lightroom does import the original, which means, in Lightroom jargon, that it records the location and metadata about the photo; in other words, Lightroom knows where the photo is, but Lightroom NEVER contains your photo, your photo is ALWAYS stored on the hard disk.
    Because Lightroom now knows where your photo is located, it is important that you not manage your photos (move, edit, rename, delete) outside of Lightroom. Photo managements tasks now must be done in Lightroom. (There are advanced methods that let you manage your photos outside of Lightroom, but these would be NOT RECOMMENDED for beginners)

  • Where does the buffer data gets stored in bw 3.5 bps?

    Hi all,
    Is there any standard tables, where in i can look for the buffer data. And how to delete nor refresh the buffer data in bw 3.5 bps?
    Can anyone let me know the significance of buffer in bps 3.5?
    Thanks
    Pooja

    Hi,
    I think Data in the buffer is not stored temporarily in any specific table,once it is saved it will be as transaction data of the cube or the master data.
    The place where data is stored in buffer is called planning buffer and All  changes to the data are written to planning buffer.So you don't have to save continuously.If the data is not already in the buffer, the system reads it either from:
    The database table (Customizing objects), or Info cube (Plan Data)
    and writes it to the planning buffer.
    You can use the given function module to delete the buffer data:'UPF_METHOD_DESTROY' 
    Regards,
    Indu

  • Where is the instane of object stored in memory

    hello all,
    this is the question asked me in an interview.
    when we create an instance of an object or a variable.
    where is that instance is stored in memory?
    where are the static, final, instance variables are stored in memory?
    thanks in advance
    raghu mohan

    Yes, its handled by JVM. there is heap memory n stack memory something is available.
    where is it actually stored?
    where will the JVM resides in memory?
    thanks in advance
    raghu

  • Where is the station options configuration stored

    Where is the station options configuration gets stored in TestStand 4.2.1?
    Solved!
    Go to Solution.

    The StationGlobals.ini file is in your TestStand Config directory, which is found at <TestStand Application Data>\Cfg.
    On Windows 7, this is C:\ProgramData\National Instruments\TestStand 4.2\Cfg. I don't remember off-hand what the exact path is on versions of Windows earlier than Vista... Somewhere under C:\Documents and Settings\<Username>\. You can just search for StationGlobals.ini if you need to.

  • Where is the administrative user data stored?

    Hi I am trying to implement a simple user management application
    in an weblogic server (10.3.2).
    The user data is stored in an oracle database and the SQLAuthenticator is configured correctly.
    Everything works fine, the user gets authenticated, created and deleted.
    But when I try to log in several times with the wrong password, the server locks me out.
    I know that i can unlock the user via the console but my question is:
    Where is this information stored so that i can reset it using my user management aplication?
    Can anyone help me or is this a big weblogic secret?
    Regards
    Edmund

    Can anyone help me or is this a big weblogic secret?
    Why do u want to know it???
    There are ways by which u can unlock the user programatically.. i dont think u can unlock it by modifying some files on WLS, not recommended either...
    U can use the following Mbeans
    weblogic.management.security.authentication.UserLockoutManagerMBean
    weblogic.management.runtime.UserLockoutManagerRuntimeMBean
    http://weblogic-wonders.com/weblogic/2010/07/25/userlockout-feature-of-weblogic-server/

  • Where is the customer number(KUNNR) stored in VBO3 transaction??

    Where/In which Transparent Table is the customer number(KUNNR) stored in VBO3 transaction??
    In VBO3 transaction>>Enter some agreement number>>press enter>>Click on Condition button>>select some value and proceed.
    Here you will find Customer number(Kunnr).Please tell me,in which table is this value stored??Kindly tell me the procedure to find the same so that I can find In which transparent table others fields stored on this screen......:)
    Regards,
    Shashank.

    dear shashank,
    1.  just go to the screen and -
    > click f1 -
    > then technical details
    > click on dataelement -
    > double click on data element
    > then check menu bar -
    > utilities -
    > where used list
    you will find some tables ... so these are the main tables
    2. or other wise go to st05 ,
        activate trace
       do the transaction
       and deactive trace
       and check the details in that u can view tables from that you have to see in which table it is updating..

Maybe you are looking for

  • Ipad not recognized by Windows 7

    I am connecting my iphone 4 and ipod (gen4) to my Windows 7 computer without problems, but my iPad 2 wifi is not recognized and does not charge. How can I get my ipad recognized? Thanks for any help!

  • Looking for Screen Protector for A5500-H / A8-50

    I'm looking for a good but reasonably priced screen protector for my Mum's new A5500-H. I know there's loads of cheap ones on e-bay but I've tried them for other devices before and found they don't apply very well or have a nasty rough surface that y

  • XML in MS Outlook vCard Contacts in Address Book

    I have sent myself a few contacts from MS Outlook using the vCard format and imported into Mac Address Book. However, the Notes field comes in with a ton of HTML or XML looking information, and its difficult to decipher and see my text. How do I clea

  • Connecting 2 RV042 to different subnet and DSL connections

    Small office, 2 RV042, 2 DSL connections. 1 is used striclty for the business side, and the other is for our CCTV network. They also have seperate DSL connections as we have 2 external IP address for clients to connect remotely. We don't want to take

  • Space in the Table Name

    I was writing a program to move data from an Access database on to a different database. The existing access data base has table names with spaces and SQL queries do not recognize such names! Any suggestions?