Where is the substitution of messaging.Consumer.

I guess mx.messaging package is changed.
I was using FDS2 for rtmp.
Which class is the replcement of mx.messaging.Consumer.
Can I still use FDS2 with Flex3 or do I have to use LiveCycle
for rtmp.
Any explaination or samples?
Thanks in advance.

Hi,
You will need to grab the LCDS ES package for now to get the
Consumer class. We did some repackaging and Consumer is now in the
new fds.swc instead of rpc.swc which comes with the SDK.
Matt
Adobe

Similar Messages

  • How to get the number of messages consumed by a MDB ??

    Hi all,
    How to get the number of messages consumed by a MDB displayed in OEM in a Java Application ???
    DMS ??? what use DMS ???
    tanks

    ok.
    Well using DMS is one way to get at these sorts of stats in a programmatic manner.
    There's a Java API you can use, or you could call out to the Spy servlet to query the DMS stats in either text or XML form.
    I don't have an MDB published so I can't show you specifiically, but here's the sort of query you can use to extract the data.
    http://localhost:8888/dms0/Spy?format=raw&table=oc4j_ejb_stateless_bean&recurse=children
    Which produces a table of the TEXT form:
    <DMSDUMP version='9.0.4' timestamp='1163456821185 (Tue Nov 14 08:57:01 CST 2006)' id='8888' name='OC4J'>
    <statistics>
    /oc4j [type=n/a]
    /oc4j/default [type=oc4j_ear]
    /oc4j/default/EJBs [type=oc4j_ejb]
    /oc4j/default/EJBs/jmsrouter_ejb [type=oc4j_ejb_pkg]
    /oc4j/default/EJBs/jmsrouter_ejb/AdminMgrBean [type=oc4j_ejb_stateless_bean]
    pooled.count:     11     ops
    pooled.maxValue:     1     count
    pooled.minValue:     0     count
    pooled.value:     0     count
    ready.count:     11     ops
    ready.maxValue:     1     count
    ready.minValue:     0     count
    ready.value:     0     count
    session-type.value:     Stateless     
    transaction-type.value:     Bean     
    /oc4j/default/EJBs/jmsrouter_ejb/EnqueuerBean [type=oc4j_ejb_stateless_bean]
    pooled.count:     11     ops
    pooled.maxValue:     0     count
    pooled.minValue:     0     count
    pooled.value:     0     count
    ready.count:     11     ops
    ready.maxValue:     0     count
    ready.minValue:     0     count
    ready.value:     0     count
    session-type.value:     Stateless     
    transaction-type.value:     Bean     
    /oc4j/default/EJBs/jmsrouter_ejb/TimerHandlerBean [type=oc4j_ejb_stateless_bean]
    pooled.count:     11     ops
    pooled.maxValue:     0     count
    pooled.minValue:     0     count
    pooled.value:     0     count
    ready.count:     11     ops
    ready.maxValue:     0     count
    ready.minValue:     0     count
    ready.value:     0     count
    session-type.value:     Stateless     
    transaction-type.value:     Bean     
    </statistics>
    </DMSDUMP>
    Or produces an XML document of the form:
    http://localhost:8888/dms0/Spy?format=xml&table=oc4j_ejb_stateless_bean&recurse=children
    You can use the Spy console to find the table that contains the details for MDB and then take it from there.
    This is not what you specifically want to do, but it does provide a good overview of how DMS is used.
    http://www.oracle.com/technology/pub/notes/technote_dms.html
    -steve-

  • Where is the "Load more messages..." button in Mail?

    My Mail icon has a badge showing unread messages since I did a "Continue search on server" but the usual button at the bottom of any inbox saying "Load more messages" is missing. As a result I am unable to view my old unread messages. I have restarted the Mail app as well as the iPhone, with no change.

    I'm trying to change the number of stored emails on both my iPad and iPhone. I used to do this as you suggested but since the latest os7 update the 'Show' option has disappeared. Any ideas what I can do?

  • A way to track where all the Sub Var are applied?

    Hopefully this is the section where to post.
    Is there a way of tracking where all the substitution variables are being used in the reports?
    Either in reports or calc scripts, or in a 3rd format, if there is one.
    We just don't want to open up each script individually and scan for use of the sub var, or open each report and see if it's used.

    Hi there,
    Is this HFM or Essbase?
    Regards,
    Thanos

  • How can I retrieve the inbound XML messages (invoices) by ABAP program?

    Where are the inbound XML messages (invoices) saved in XI box?
    How can I retrieve the inbound XML invoices in XI box by ABAP program?
    Is there any method/BADI/function module to retrieve these XML invoices, so I can output these XML invoices in an ABAP report?
    Thanks in advance for your help!

    Hello Fisher,
    This Webblog will help you.
    /people/alessandro.guarneri/blog/2006/02/14/super-message-monitor-for-sap-xi
    From this blog you will understand the code behind SXMB moni .. which performs the selection from database. You can write a report as well.
    Cheers,
    Himadri

  • How to send the SOAP Fault Message to the Web Service Consumer

    Hi,
    I have configured SAOP  to Proxy Syncronous Scenario in PI 7.1 and using XML Validation  in Adapter Engine to Validate the Structure of the Message Payload.The scenario is working fine.When some of the Filed's Length  increses the maxLength specified in the Data Type . We are getting the Following error.
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
       <SOAP:Body>
          <SOAP:Fault>
             <faultcode>SOAP:Server</faultcode>
             <faultstring>Server Error</faultstring>
             <detail>
                <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                   <context>XIAdapter</context>
                   <code>ADAPTER.JAVA_EXCEPTION</code>
                   <text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: XML Validation for payload with root element name MT_Out_CustomerMaster_FPMReq , target namespace http://Pegasystems.com/I06_Customers Failed!Errors Encountered During Parsing
    1.cvc-maxLength-valid: Value '123456789' with length = '9' is not facet-valid with respect to maxLength '8' for type 'null'.
    2.cvc-type.3.1.3: The value '123456789' of element 'CompanyCode' is not valid.
    3.cvc-maxLength-valid: Value 'asdf' with length = '4' is not facet-valid with respect to maxLength '1' for type 'null'.
    4.cvc-type.3.1.3: The value 'asdf' of element 'OperationType' is not valid.
         at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1164)
    My question is How does the Web Service Consumer can handle this Soap Server Error in the SOAP Fault.Or How can we provide a specific information like  'The value '123456789' of element 'CompanyCode' is not valid.It exceeds the Maximum Length'.
    I read this /people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client blog .Where it is mentioned that the Web Service Consumer can handle while calling the Web Service.Is there any other solution?
    Kindly appreciate your help.

    Thank You Stefan for your kind reply.
    So  you mean to say if we use the XML Validation .we cannot provide proper error information to the calling Web Service Consumer .And While calling a Web Service they cannot Extract the Exact Message in the Text Filed(<text>) present under the Detail Element (<detail>) in the <SOAP:Fault> node. as
    <text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: XML Validation for payload with root element name MT_Out_CustomerMaster_FPMReq , target namespace http://Pegasystems.com/I06_Customers Failed!Errors Encountered During Parsing
    1.cvc-maxLength-valid: Value '123456789' with length = '9' is not facet-valid with respect to maxLength '8' for type 'null'.
    2.cvc-type.3.1.3: The value '123456789' of element 'CompanyCode' is not valid.**
    3.cvc-maxLength-valid: Value 'asdf' with length = '4' is not facet-valid with respect to maxLength '1' for type 'null'.
    4.cvc-type.3.1.3: The value 'asdf' of element 'OperationType' is not valid.
    That is why we have to use the Fault messages and  Field Lengths has to be Validated  in the Server proxy.
    Please Correct me If I am wrong.

  • How to acces the filename from Message Header during variable substitution

    Hi,
    We need to access the attribute filename from Message Header during Variable Substitution.We are able to access the following attributes of Message Header
    sender_party, sender_service, receiver_party, receiver_service, interface_name, interface_namespace,
    message_id (message ID with hyphens, for example 9fbe1ff1-9a0d-11d9-8665-cbf10a126331)
    message_id_hex (message ID in hexadecimal format, for example 9fbe1ff19a0d11d98665cbf10a126331)
    For example, if we want to specify the interface name from the message header in the target directory or in the file name scheme, we enter message:interface_name as the reference.
    In the same way i need to access the filename which we get in the Message Header(which we get in the Message Header when we check the Adaptor specific message properties and filename in sender CC).Any suggestions on the same
    Thanks and Regards,
    Bhargav
    Message was edited by:
            bhargav gundabolu
    Message was edited by:
            bhargav gundabolu

    Hi Bhargav,
    Use this UDF to retreive the file name from the Dynamic Configuration Payload in the mapping.
    getFileName(UDF) -
    > Filename(node in the target structure).
    public String getFileName(Container container)
       //write your code here
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return  ourSourceFileName; 
    Create a node in the target structure top hold the filename returned by the UDF.
    Now your payload will have the filename along with the actual data.
    U can use the variable substution now as u use for the other data in the payload since the filename is now a part of your payload.
    Regards
    San

  • HT4009 Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

    Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

    You can try contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Exchange 2013 - The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the configured threshold

    Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%). 
    The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
    configured threshold.” 
    There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20). 
    From what I can tell, all of the IP addresses are from Taiwan. 
    The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014). 
    From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening. 
    The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
    Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
    The Error reads:
    The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
    mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
    Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
    Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
    I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
    Recent changes to the system:
    About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
    Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
    I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
    Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!

    Hi,
    Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
    Thanks,
    Simon Wu
    TechNet Community Support

  • I have a 4g classic iPod.Suddenly almost all my games won't play and I get a message to go to the site but there is nothing there for me. Where are the games for my iPod and what has changed to make my games no longer Play?

    Most of the games on my iPod classic 4g will not play anymore. I get a message that is of no help and when i synced the games they disappeared. What is going on and where have the games for iPods on iTunes gone ?

    Apple removed the clickwheel games from the iTunes Store back in September. 
    Have you tried a hard reset of the iPod to see if that helps resolve the issue of not being able to play the games?  To do this, first make sure the Hold Switch is in the OFF position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI

    When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI( I am not getting any error message in E$_TARGET_ANI_TEST).
    When i am running the interface i am getting the below error against the errored step
    "ORA-01045: user ABC lacks CREATE SESSION privilege; logon denied."
    Only E$_TARGET_ANI_TEST  is created with no data. No such tables like C$_0TARGET_ANI_TEST, I$_TARGET_ANI_TEST are created and also data is not inserted in the target table TARGET_ANI_TEST.

    Hi,
    I have checked that only E$ table is created. C$ and I$ table are not created ( I have selected my target schema as the part for the staging table).
    All the parameters for dropping the tables are selected as "<default>:false".
    I am importing the following KMs with the following parameters:
    1) CKM Oracle
    DROP_ERROR_TABLE
    :false
    DROP_CHECK_TABLE
    :false
    CREATE_ERROR_INDEX
    :true
    COMPATIBLE
    :9
    VALIDATE
    :false
    ENABLE_EDITION_SUPPORT
    :false
    UPGRADE_ERROR_TABLE
    :false
    2) LKM SQL to SQL
    DELETE_TEMPORARY_OBJECTS
    :true
    3) IKM SQL Incremental Update
    INSERT
    :true
    UPDATE
    :true
    COMMIT
    :true
    SYNC_JRN_DELETE
    :true
    FLOW_CONTROL
    :true
    RECYCLE_ERRORS
    :false
    STATIC_CONTROL
    :false
    TRUNCATE
    :false
    DELETE_ALL
    :false
    CREATE_TARG_TABLE
    :false
    DELETE_TEMPORARY_OBJECTS
    :true 

  • Error: The instance completed without consuming all of its messages.

    Hi,
    I have following scenario.
    I am processing messages in Sequential way. I have two Orchestration, Orch1 has transformation logic and Orch2 has Sequential processing logic. Orch2 is directly binded with MsgBox and receives the messages persisted by the Orch1 based on correlating property.
    I need to sort the message based on ReceivedFileName(which is date time stamp). So In the Orch2, I am receiving all the messages within certain delay say 1min, adding to a List, sorting all the messages based on Filename and then sending to destination location one by one.
    Now I am getting one error in Orch2 when the frequency is high. The error says "The instance completed without consuming all of its messages. The instance and its unconsumed messages have been suspended. " I believe the cause could be, when the Orch2 sending one batch of sorted messages then it might have received new messages meanwhile. And so, as the sorted messages are sent the Orch2 instance completes but there are new messages still attached to this Orch instance and thus its suspending.
    I am totally not able to figure out how can I avoid this error. Also I don't want to terminate the suspended message(loss of message :().
    Thanks in advanceAjeet Kumar

    Thanks for Reply.
    I tried with this also, but the problem is even if I decide any end point for Convoy, then also I can't stop the Orchestration to not to subscribe new messages during its life time. I will explain this in detail
    We can separately divide the Orch2(Order Delivery Orch) functionality into 3 parts and considering time lags.
    1) Orch2 receives all the convoy msg from MsgBox say it took time t1(equal to the delay)
    2) Not it will sort the messages based on FileName...say this operation took time t2
    3) Now I am sending the sorted messages one by one to destination location. Say it took time t3 to send all the messages.
    Now, if during the time delays (T2+T3) if any new message comes into Convoy orch, then the instance will suspend with the error "The instance completed without consuming all of its messages. The instance and its unconsumed messages have been suspended. ".
    So is there any way to make sure that Convoy Orch does not receive any new msg during time T2+T3.Ajeet Kumar

  • HT201342 Where is the from field in a Mac mail message?

    From an Apple information document:
    You can send email from your @icloud.com address by following these instructions:
    Begin composing a new email on the device of your choice.
    Select the From: field in your message.
    Choose your @icloud.com address from the list of addresses.
    Compose your message and send it.
    On number 2, where is the from field in a Mac mail message?

    Is there any way to move the default location of the event editing panel from the upper left corner of the display to somewhere in the middle?
    Try to scroll while the editing panel is open

  • Where did the print setting "Rewrap message to fit" go in Mail 7?

    Where did the print setting "Rewrap message to fit" go in Mail 7?
    All text prints too small. Settings for font size haven't changed and the emails print out much smaller than the view settings.
    I don't see the options for "Rewrap message to fit" or "Keep fonts the same size".
    Suggestions?

    I have the same problem. Text and the info with the "To" header all prints very small. I also cannot find the controls described. Just updated to Mavericks, never had problem before this. Same printer, and problem also occurs on another different model printer I tried for a test.
    Mail ver 7.2
    OSX 10.9.2
    Please help !

  • ı wanna delete my purcahe but it did hide and where is the hidding ı wanna delete my purchase please because I am not looking a few purchase (dowloaded at the apple store) help me and send message to my email thank you have good work.

    ı wanna delete my purchase but it did hide and where is the hidding ı wanna delete my purchase please because I am not looking a few purchase (dowloaded at the apple store) help me and send message to my email thank you have good work.

    what?

Maybe you are looking for