Where is the system directory of JDeveloper 10.1.2.1?

In JHeadstart 10g for ADF Installation Guide, it says the followings:
If you want to be able to use JHeadstart Designer Generator: in <JHeadstartHome>\config\jdevaddins you will also find a file named migration.xml. This file must be copied to the system directory of JDeveloper, for example: <JDeveloperHome>\jdev\system10.1.2.0.0.1811. On Linux this directory is in the home directory of the user that is running JDeveloper: $HOME/jdevhome/system10.1.2.0.0.1811. The exact name of this directory depends on the build number of JDeveloper.
But, there is no directory like <JDeveloperHome>\jdev\system10.1.2.0.0.1811 in JDeveloper 10g(Version 10.1.2.1, build 1913) New Aug 2005.
Where is it?

You have to start JDev 10.1.2.1 once before the
system directory is created under the /jdev
directory. The name will be something like
system10.1.2.1.0.1913.
Steven Davelaar,
JHeadstart Team.Thanks, Steven.
You are right.

Similar Messages

Where in the System Preferences do I increase the computer screen text size

Where in the System Preferences do I increase the computer screen text size

What you need to change is Screen Resolution.
You can change the screen resolution in System Preferences / Displays. On that pane you will see numbers like 1440 x 900. The larger the numbers the smaller the text on the screen. (The current setting is shown in grey.) Just experiment with other resolutions til you find one that suits you. You want to move down in the options to increase the size of the displayed text.
When you select a new resolution, you have to confirm that it's what you want, else the computer will revert to the previous resolution.

Where's the "System Temp" probe? (K8T-Neo)

Where is the "system temp" probe located, and what does this measure? I've seen other posts asking this question and I can't see a definitive answer.
The reason I ask is this:
I've got a nice copper Zalman heatsink that keeps my cpu cool, around 30 idle and 40-45 under load. The "system temperature" is always hotter than the cpu, at least 40 and can get up to 50. I stick my hand in the case and the air is no where near that hot, so I figure its reading the temp of some chip on the board, ie the northbridge (ok I know its not really the nb, but lets just call it that.)
I stuck a 4cm fan on the stock passive nb heatsink and this had very little affect on the "system temp." So either that temp probe is not on the nb or the stock heatsink is just lame. Anyone got any ides?
Another question --- what does the V-Link DATA 2X bios setting do? I've read that enabling it greatly improves "system performance." But when I disable the SATA controller (as I have no SATA drives) the V-Link option becomes greyed-out, like the v-link only has to do with SATA. Does it affect anything if I'm not using SATA?
Scott

Hi
The Winbond chip at top of board above Dimms and Bios monitors the temp, if there is hot air coming from the HDD bays, as chip is right under end of drive as a rule, just where all the cables and things are most likely to interupt air flow. it can affect the temps. Its a good idea to direct air from a fan to that point.
Cheers
jocko

I have a big ? in my docK that says system profiler but when I double click nothing comes up - where is the system profiler

I have a big ? in my dock that says "System Profiler" but when I double click nothing comes up - where is the system profiler --

Thank you so much - System Information did it!!

Where is the "USER_DUMP_DEST" directory? Thanks!

Hi, everybody:
I want to trace the connect DB error (ORA-00604 and ORA-12705) using the thin java driver.
After I set the
SQL_TRACE=TRUE
in the $ORACLE_BASE/admin/$ORACLE_SID/scripts/init.ora and start database, then run the java class code (it will throw the 2 errors), I think I should find some trace files under the USER_DUMP_DEST directory, but I do not found the directory, Why and where can I find the trace files?
Installed DB: 10.2.0.1.0
OS: RHEL5
Thanks again!

We do have to connect as a user which has rights on the V$PARAMETER view...
SQL> show parameter dump
ORA-00942: table or view does not exist
SQL> conn system/*******
Connected.
SQL> show parameter dump
NAME                   TYPE        VALUE
background_core_dump   string      partial
background_dump_dest   string      C:\oracle\admin\MYDB\bdump
core_dump_dest         string      C:\oracle\admin\MYDB\cdump
max_dump_file_size     string      UNLIMITED
shadow_core_dump       string      partial
user_dump_dest         string      C:\oracle\admin\MYDB\udump
SQL> Cheers, APC

Where is the .trash directory?

Hi there, I have a .QT file taking up a lot of space on my HDD, i've used the whatsize program to locate the file and it deletes it to the .trash directory. However this is not the usual Trash folder so there is nothing to delete permanently from there.
Where can I find this directory and empty it so I can free up some valuable GB's on my HDD.
Thanks,
Luke.

I belive that the .trash is an invisable file, which means that you won't be able to see the file. to erase it I would look in a cleanup program. the one on the link below is called root machine.. in it I would try the basic empty trash securly, or go into the toold part and where it says trash info and lists the amount in the white oval just click on the oval, that should do the trick.
http://www.apple.com/downloads/macosx/systemdiskutilities/rootmachine.html
powermac dual 2.7 G5, imac G4 800mhz, emac 1ghz, dual 2ghz powermac Mac OS X (10.4.3)

Where is the iPhoto directory?

My apologies if this simple question is too simple. I have combed all of the cryptic resources here and cannot find the answer.
When syncing my 3GS to iTunes, a pop-up advises that my "photos cannot be synced because the directory cannot be found."
Where is the directory supposed to be located, and how can I remedy this pop-up.
Oddly, there is not a Photos tab in iTunes as alluded to in some of the other posts.
Thanks - Jeff

No photos are synced - not photos transferred from your computer, or photos captured by the iPhone.
iTunes does not handle importing photos that were captured by the iPhone or photos in the iPhone's camera roll. Photos in the camera roll are included with the iPhone's backup as the first step during the iTunes sync process, but that is it.
Photos transferred from your computer to your iPhone - selected under the Photos tab for your iPhone sync preferences with iTunes is a one way transfer process only - from your computer to your iPhone.
To the OP - when you select your iPhone in the iTunes source list under Devices, which tabs are available for your iPhone sync preferences with iTunes?

Where's the plugin directory on firefox 3.6.13 on librix?

I can't find the plugin directory to install plugins

Firefox can find plugins in various places. One of them is the plugins folder in the Firefox installation folder.
* http://kb.mozillazine.org/Determining_plugin_directory_on_Linux
You have other plugins installed, so you can see the path of them on the about:plugins page if you first set the pref <b>plugin.expose_full_path</b> on the about:config page.<br />
It is best not to leave that pref set to true as it exposes that full path to web servers, so reset that pref to false after you are done with the about:plugins page.
You can open about:plugins and about:config via the location bar, like you open a website (about: is a special protocol to access some build-in pages).<br />
If you get a warning when opening the about:config page then you can confirm that you want to continue.
See "Manually uninstalling a plugin" in [[Troubleshooting plugins]]
See also http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins

Where does the system preferences live? mine disappeared by the finder bar

i've lost my system preferences from my finder bar. please tell me how i can retrieve them.
thanks,
brad

Do you mean it's gone from the Dock (bottom of the screen) or from the apple menu in the top right-hand corner?
If you mean it's no longer in the Dock, just open your Applications folder and drag the System Preferences icon into the Dock.

Where is the System queued windows error reporting?

Hi Guys,
I would like to increase the free disk usage to more than 15% on the mailbox server Drive C. After check and discuss, we are to achieve this goal that move the system queued windows error reporting to other place. However, i can't find this file after
read the relevant documents and can't find this file in Drive C. Could you help me found path of this file? it's urgent. i will waiting at online.
note: Our boss is not allow to delete this file. i am so sorry.

Hi,
You can check the Windows Error Reporting Service queue in the paths below:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue
C:\Users\Username\AppData\Local\Microsoft\Windows\WER\ReportQueue (For Users)
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Susie,
This is Daniel.
I note that This file take 18.2GB through view disk clear up, but these all folder just take 800M, I would like to they are not in their proper place.
but I would like to thanks for you help.

Where does the System's Properties file locate?

I have searched it in the path : Java_Home\jre\lib
But i couldn't found.
I want to add some Properties to it but i don't want to do it at runtime by using System.setProterty().

You can define preferences. But using these are more complex than system properties.
No matter how you define the System properties in the end setProperty or setProperties needs to be called at runtime. These properties are runtime settings.

Where are the system preferences for internet access?

I had to re-install 10.6.2 with a disk formatting... all went well and I manage to go online .
But I notice that my old system preferences are not back in place... I don't have all the connection settings I used to have and in which I had a manual IP address for a school ethernet network connection.
Where can I find them?
Can I just drag them back into my computer?
Thanks for your help.
JP

If you have a backup of your entire previous system, you could try looking at /Library/Preferences/SystemConfiguration/com.apple.network.identification.plist . I'm not 100% sure that's where the information would be stored, but it looks promising. If you think you would recognize the IP address when you see it, open that file from your backup with a text editor and scan through for the IP address. Then enter it in your network settings.
If you don't think you'd know what you were looking at, you could try moving that file from the backup to the new system, but I'd take some precautions. Move the newer copy of that file to the desktop temporarily, then restart and see how things work. If anything goes wonky, put it back, replacing the older file. If after a few days all is well, trash it.

Where are the system extensions in Tiger?

In Mac OS 7-9 system extensions and control pannels were easy to find. Where are they in OSX?
John

John,
The Preference Pane package files are located in the following folders: Macintosh HD/System/Library/PreferencePanes and Macintosh HD/Library/PreferencePanes
Having specified their location, I would add the caveat that I do not endorse altering the files or moving them to another location.
;~)

Where is the Backup directory in WinXP?

I would like to be sure I am backing up the back up.
Also, is it possible to specify a different directory than a default one? I'd like all data of this type to go to an external drive.
Cheers and thanks,
Arthur

I had spent too much time wandering cluelessly around the Help system and Find in Finder, resulting only in frustration.
Your answer provided a quick and easy link to the information I needed.
Very Helpful!
Thank you.

How to write program to list the system directory(content of pc)

how to write a program that will display all the folder n directory of the pc like:
+My Computer
+c:
+d:

Copy this line and save it in a file named "dirlist.bat":
for %%* in (%1) do dir /b %2 %1To use it, change to the directory it's in and at the command prompt type
dirlist directory [/s] directory is the name of the directory that you want listed.
/s is optional and will list the contents of all subdirectories also.
(You didn't say it had to be Java - use the right tool for the job)

Where is the system directory of JDeveloper 10.1.2.1?

Similar Messages

Maybe you are looking for