Where is the "threshold" setting for Image Trace in Illustrator CC 18.1.0?

I'm using IIlustrator CC 18.1.0 and when I use Image Trace the "threshold" slider is gone. This was actually the single most important adjustment for this tool. Is it hidden somewhere? I attached a screen shoot of my Image Trace window...

Similar Messages

Where is the privacy setting for the trial version of cs6 photoshop. I would like to turn it off.

Where is the privacy setting for the trial version of cs6 photoshop. I would like to turn it off. The answers given by 'Staff' are incorrect - it is NOT locared within Help/Adobe Product Improvement Program! I use W7 64bit.

daveteauk2 wrote:
Where is the privacy setting for the trial version of cs6 photoshop. I would like to turn it off. The answers given by 'Staff' are incorrect - it is NOT locared within Help/Adobe Product Improvement Program! I use W7 64bit.
You are correct.
The privacy settings will be those of the "trial experience" and that has nothing to do with the APIP.
Maybe this image will help:

Where is the status setting for invisible

Where on the menu is the control to change status, i.e. on-line, invisible. i don't want people to know when I'm on the internet.

daveteauk2 wrote:
Where is the privacy setting for the trial version of cs6 photoshop. I would like to turn it off. The answers given by 'Staff' are incorrect - it is NOT locared within Help/Adobe Product Improvement Program! I use W7 64bit.
You are correct.
The privacy settings will be those of the "trial experience" and that has nothing to do with the APIP.
Maybe this image will help:

Where is the default file for SVG filters in Illustrator CC?

Where is the default file for SVG filters in Illustrator CC?

User \ Library \ Application Support \ Adobe \ en_EN \ Adobe SVG Filter.svg
it's:
User \ Library \ Application Support \ Adobe \ Adobe Illustrator 17 \ en_EN \ Adobe SVG Filter.svg
Note that youneed to unhide the Library folder on Mac OS X Tiger and up

Where is the zoom slider for images in Finder?

Since installing Lion, I have noticed that I can no longer make the thumbnails in a Finder window larger using a zooming slider (as is found in iPhoto). If I remember correctly, when I used to open a folder full of images in thumbnail format, I was able to use a slider at the bottom of the window to enlarge image thumbnails. Is this function no longer available, or am I missing something?

Hi Captfred,
Your answer help me a bit.
However, in SL, I could zoom in the thumbnail / or resize the icon inside the Finder window by 2 finger pinch gesture, just like what we usually do in the Safari window. Now it seems this gesture feature is not avaliable OR we need to do something in the setting in LION OS?
Thank you.
Regards,
peteryung

Where is the build setting for C99?

How do I change the build settings in my objective-C Cocoa project so that the compiler uses C99?
In particular, I want to be able to write
for (int i = 1; i < 100; ++i)
instead of
int i;
for (i = 1; i < 100; ++i)
And I want to be able to write
UInt64 myBigUnsigned = (1 << 63);
And I want to do lots of bitwise operations on UInt64 variables.
Also, are there any issues I should worry about doing these things?

James,
In particular, I want to be able to write
for (int i = 1; i < 100; ++i)</div>
Look at the C language Dialect setting in the Project Build settings. "Project" menu, -gt; "Edit Project Settings", then choose the "Build" tab. It's in the "Language" collection. There's a pop-up there and one of the choices is "C99".
Sorry I can't be much help on the rest.
best,
charlie

Logic 7.1 - Where's the buffer setting for DTDM/DAE?

Seems that I cannot find the buffer to vary my Digi HD setup. I can see the buffer process manager at the bottom of the driver setup menu (small,medium,large) but I would love to find the usual 128-1024 options that are the usual standard offerings. Any ideas? Is it hidden somewhere else or handled by " Digi Coreaudio Manager"? I'd love to minimize some of the artifacts I'm experiencing on larger instantiated files ....

Hello BassMan,
I don't know about the ProTools HD setup and I may be writing bull**, however in older systems you could change the buffer size just by opening the DAE program directly. If your Digi runs on DAE, may be it is worth a try.
Good luck,
Mac512 (old, B&W, no scsi nor adb, but still running well)

Latency apply for Streams Process APPLY_STREAM exceeds the thresholds set

Hi,
Apply process is working, but it shows error in enterprise manager that *"Latency apply for Streams Process APPLY_STREAM exceeds the thresholds set"*
i have changed parallelism to 5 and commit_serialization to FULL. but still error remains.
how to resolve the error?
can any tell me what is the problem in apply process. am i need to change the parameter.
urgent!!!!!!
please

You can tune your apply server by tracing on the apply process. To do this: identify the PID (Process ID)
APPLY SERVER:
select SID from V$STREAMS_APPLY_SERVER;
With above SIDs, query V$PROCESS to get the PIDs:
select a.pid, b.sid
from v$process a, v$session b
where a.addr=b.paddr and b.sid in(the list of sids from above);
With the PIDs found:
$ sqlplus /nolog
connect / as sysdba
oradebug setorapid <PID>
oradebug unlimit
oradebug Event 10046 trace name context forever, level 12
wait for 10-15 mins
oradebug tracefile_name -- gives pathname / filename to file being written to
oradebug Event 10046 trace name context off
run TKPROF on trace file
you may have to add some indexes on your tables . If possible, each table for which changes are applied by an apply process should have a primary key.
read more in
http://download.oracle.com/docs/cd/B19306_01/server.102/b14228/gen_rep.htm
Section Substitute Key Columns
Edited by: user596799 on Apr 17, 2011 8:24 AM

HT4972 where can I find the update setting for my ipad 4 version?

Where can I find the update setting for my ipad 4 version?

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

What's the recommended setting for "Process memory usage" ("process virtual" in UI) for a 64-bit host on a 64-bit OS?

Hi gurus
In resource based throttling, what's the recommended setting for "Process memory usage" ("process virtual" in the resource based throttling tab of the UI) for a 64-bit host
on a 64-bit Windows OS?
According to MS (http://msdn.microsoft.com/en-us/library/ee308808(v=bts.10).aspx):
"By default, the
Process memory usage throttling threshold is set to 25. If this value is exceeded and the BizTalk process memory usage is more than 300 MB, a throttling condition may occur. On a 32-bit
server, you can increase the Process memory usage value to 50. On a 64-bit server, you can increase this value to 100. This allows for more memory consumption by the BizTalk process before throttling
occurs."
Does this mean that 100 is the recommended setting for a 64-bit host on a 64-bit Windows?
Thanks
Michael Brandt Lassen

Hi Michael,
Recommended setting is the default setting which is 25 .dot.
If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
High process memory
Process memory usage (MB)
Process memory usage threshold (MB)
You can see these counters under “BizTalk:MessageAgent”
You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
high values and causing throttling, then you can update the Process memory usage.
Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
usage.
The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
hike (or any reasons) which caused throttling, then do changes to default throttling setting.
Just changing the default setting without actual reason could have adverse effect where you end up allocating
more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Where is the background picture for a window stored?

Greetings,
Where is the background picture for a window stored? What is the file called? I am trying to find the image used on a DVD.
Thanks

when you set a picture to be a background of some folder that picture is not moved from its original location. instead a record is made in the .DS_Store file of that folder indicating that this picture is the one to be used for the background. in case of the DVD it is likely sitting in some hidden folder right on the DVD.
run the following terminal command to enable showing hidden files in finder
defaults write com.apple.finder AppleShowAllFiles 1; killall Finder
then look on the dvd and the picture should be there somewhere. if you still can't find it open the .DS_store file of the folder in question using Text Editor. a lot of this file will be unreadable but the picture path will be present in plain text.
when done rerun the above command after changing 1 to 0.

How to deactivate Photoshop CS4 as the default browser for image

I wanted to deactivate Photoshop CS4 as the default browser for image. Now everytime when i want to open BMP(bitmap) file it always use photoshop CS4 to open the file. It takes a longer time to load the bitmap picture when using photoshop CS4 to open.
Can anybody help!
thank you

Mylenium is implying just that. There's a checkbox that reads something like [ ] Always Use This Program to Open This File Type.
I do know that in Photoshop CS5 in Bridge there's a preference dialog that allows you to set file associations as well... I'm not where I can test CS4 at the moment. There may be such a dialog also in Bridge CS4. Open Bridge, choose Edit - Preferences - File Associations if that subcategory exists, then find your file type and change the association.
Yet a third possibility is that if you have a viewer program like IrfanView that you'd like to associate with the file type, then the viewer program likely offers a menu through which you can indicate you want that program assocated with particular file type(s). I have instructed IrfanView to make itself the viewer for all Image types, and that works well.
-Noel

Where is the download link for SCEP Client Offline installer for x86 & x64 altest greatest version (4.6.305 as of today)

Where is the download link for SCEP Client Offline installer for x86 & x64 latest greatest version (4.6.305 as of today)?
The answer IS NOT IT AND NEVER WILL BE "DOES NOT EXIST"!!!!!! MUST NEVER NEED TO RUN UPDATES TO GET IT!!!!!!!!! THE ONLY ACCEPTABLE ANSWER IS THE LINK!!!!! DUH GET YOUR ACT IN GEAR MS!!!!!!!!!!
Ralph

Thanks to all for the information. I work in higher ed. We have SCCM latest version, fully licensed. Unfortunately the individual who manages the SC does not have a clue as to where to find the SCEP installer. I sent him links from MS that shows him where
it is supposed to be. The version he say's is on our SC Management server is 4.3. I, in the past, was able to get 4.5 independent of him and it has been working well for me but it is time to use the latest greatest version instead. I should just as easily
be able to get 4.6. As far as licensing goes, if the product was correctly designed it should just work itself out just like it does for the 4.5 version I was able to easily find and download.
As for the link given by KevinMJohnston, thanks by the way, its the closest I have come to getting what I need but all I get is a spinning wheel in Firefox, the only browser one should ever need. In IE I get prompted for an email address, which it should
NEVER EVER DO!!!!!!!!!! I did give them my address, but alas, after waiting over 30 mins. I still don't have a link to the update or the CU4 Config MGR update mentioned. (Another reason I am not very nice to MS, along with, see below...) Please send me the
link that they are suppose to send me in the email.
As for the intensity of the request it comes from not being able to find the update on my own. (Amongst a million other complaints as MS makes my job harder and harder, just think of all the lost productivity and extra repair efforts needed because MS stopped
allowing you to do upgrade/repair installs from the install discs. You have to have a working OS to do it, or you will lose your settings etc and will have to re-install all of your software etc. How STUPID IS THAT! Can't use it to fix a blown driver or BSOD
problem like you could in XP. There is no excuse for that, I know better. So you can see why I have nothing good to say about MS etc etc.) There is no excuse for that! If the MS updater has it available then IT MUST BE MADE AVAILABLE FOR STANDALONE DOWNLOAD
PERIOD. That goes for ALL updates PERIOD. I use these updates and many others etc so that once I seal an image for a PC it has the latest greatest version of everything. It is quicker to get it stand alone in advance and installing than waiting for MS
updates to do so. Also I prefer to config my images so that the Av installs after first boot. These are cloned PCs. Many of these PC are used in labs and are frozen. Here, the settings for the SCEP AV being pushed from above can cause major problems for the
users i.e. the scheduled scan feature. If it is on when students are taking tests and they take more than 5 or 10 mins on question MS is stupid enough to start scanning causing the system to become unresponsive. This has caused students to breakdown in tears
thinking the system is hosed and they just lost their tests. I have to do some creative reg hack, setting owner as "Guest", a disabled account, etc. to keep these settings from being changed. (Our SC managers push policies that work for the faculty
but break the lab systems which are frozen, so I have to out hack them, should not be, but it is, we are trying to get that fixed, but bureaucracy and people afraid to share power etc makes it hard.) These settings unfortunately will prevent the AV from
installing so I need to be able to manually do it after I have set the reg to allow it. And I could go on. Who knows when or why someone may need to do a manual update of something. I just had 3 systems fail 12 updates, yet when I manually downloaded
them and installed them they ALL installed without failure. I did NOTHING in between the auto update and the manual, yet it was the manual way that worked. Maybe if MS could fix those kind of issues then no one would need to get stand alone update files.)
That is not for MS to worry about. It is, however, their responsibility to make it so that I can choose what will work best for my environment, which only I could know. DUH. I have had issues in the past with MS AV and other brands being installed before "sealing"
the images. etc. etc. etc.
As you can see, there is not enough space on the world wide web to list all thousands of legitimate reasons to give Microsoft a hard time so I will do so on a case by case bases knowing I am probably spitting in to the wind, but hey somebody has to have
the guts to do it. MS MUST NEVER BE ALLOWED TO SIMPLY GET AWAY WITH IT! They Must be called to the proverbial carpet.
Maybe if people who are MVPs would not be afraid to join the choruses they would be embarrassed, (though it should be done out of moral obligation not embarrassment), enough to fix these obviously fixable problems etc. etc. etc. I have over 30 years in the
IT business, the IBM XT did not exist until my senior year in college. You are not going to be able to convince me that there is a legitimate reason, copy protection IS NOT IT, to prevent me from fixing blown OS via re-install using install disc when OS will
not boot. Nor are you going to be able to find legitimate reason for the SCEP 4.6.305 update to be so hard to get.
Thanks again for the help, still waiting for email from MS, NOT COOL MS! NO EXCUSE!!!!!
Ralph

This server does not have the module needed for interpreting traces

I wan to use the Trace Control function of the Exchange Troubleshooting Assistant. I specifically want to look at the transactions of a particular user. When starting the function I get the message, "This server does not have the module needed for interpreting traces." I find nothing to tell me what the module is or where to get it.
Specifically, I have a Macintosh user (bigwig in my organization) that insists on using Apple's 10.6 Calendar program, and constantly complains that his calendars are different between his 3 Macs and his iPhone. He claims to have put a calendar item on one machine, now it appears nowhere. And I have no way of proving what is going wrong. He hates Outlook and refuses to use it, he hates Entourage and refuses to use it. The local database for Entourage kept getting fouled up to the point that we kept having to delete this account and readding it to force the recreation of the database. The database tool never fixed the problems and of course he did a lot of customization that got destroyed every time we deleted the account settings and added them back.
I really want to run the tool for a while and see if there is actually some transaction actually happening on the server side, so I would like to have these traces and be able to view them.
SnoBoy

See
http://blogs.msdn.com/b/dvespa/archive/2011/05/27/how-to-use-extra-to-troubleshoot-rpc-client-access-issues.aspx.
Just click on ok and proceed with set trace manually.
Svetozar Petrović

Where is the language setting in pages 5.0?

please can someone tell me where is the language setting in page 5.0. this is for the purpose of spell check, for example, change british english to american english, the word "personalized" is red-underlined because the current setting is in british english, how can i fix this? thanks.

hmm this seems like to resolve the problem only temporarily.
when i shut down pages and reopens, it jumps back to the british spelling. how can i make this fixed to the american spelling?

Where is the "threshold" setting for Image Trace in Illustrator CC 18.1.0?

Similar Messages

Maybe you are looking for