Where is the "tools menu"? Many of the help topics say to go here, but I cannot find it. Searching help for it lists 1088 things, but all of the ones I looked at assume you can already find the tools menu. Where is it?

There really isn't more detail. What sequence of things do I click to find this "tools menu"? I am using Firefox 5.0.1.

Or put the phone in airplane mode as quickly as possible and then see if you can import the pics to the computer or do a iTunes backup.

Similar Messages

  • I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it.  There is a do not enter roadsign, red disk and white bar on it.  How can I see the contents?

    I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it.  There is a do not enter roadsign, red disk and white bar on it.  How can I see the contents?

    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • SCRIPTER PLUG-IN ; looks like you cannot do more that what you can do with the environment !

    Hello
    I am very interested of this possibility to develop the equivalent of the Cubase VST expression Map to drive VSL articulation changes
    I have read that the score have been re-wrote ! is this true ?
    Reading the manual I did not find that it was possible to convert score events (staccato, legato ...) into a midi command to be send to VSL
    Also you cannot work on note length.
    Looks like you cannot do more that what you can do with the environment !
    I hope I am wrong and that this is missing in the manual
    Best
    Cyril

    APPLE, can you reply ?
    Depending of your answer I will buy or not buy Logic X

  • Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

    Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

    PACE is a rather crappy copy protection software used by the following;
    Antares
    Melodyne
    Cycling 74 Max/MSP/Jitter
    iZotope oZone
    Line6 POD Farm
    McDSP plug-ins (some software purchases include a green iLok key)
    MOTU
    Overloud
    Pro Tools
    Serato
    Virtually all Digidesign (RTAS and TDM) plug-ins
    Virtually all Waves Products
    So if you have any of there, they might be the cause of your problems.
    Allan

  • TOC entries: is there a limit to how many links you can have to the same htm in TOC?

    TOC entries: is there a limit to how many links you can have to the same htm in TOC? I have an HTM that requires multiple links in the TOC. Now I can't compile a CHM. I have eliminated all other possible problems...

    Hmm, that would be a new one on me, but I see new things all the time and try to always keep an open mind.
    Okay, so one way past this might be to do the following.
    Create a snippet. Copy the content of the desired page and paste into the snippet.
    Create 30 different versions of the same topic by simply placing the Snippet into each topic. Then insert the different topics into the TOC.
    You should still be able to modify the content of the topic in the single place (the snippet) and by having discrete points from the TOC, there should be no issue and synchronization should work beautifully.
    Cheers... Rick

  • All of a sudden my iphone stopped charging and you can't hear the music through my ihome iH150 when I connect it to the dock, what can I do to fix the ihome? The ihome does turn on and I already checked for dock possible problems and I don't see anything.

    all of a sudden my iphone stopped charging and you can't hear the music through my ihome iH150 when I connect it to the dock, what can I do to fix the ihome? The ihome does turn on and I already checked for dock possible problems and I don't see anything wrong.

    I also have to add that the right earbud only doesn't work on my phone while i'm listening to music. If I'm face timing it's okay. what the heck.

  • Can not update- message says you are already running the adobe application manager - but it is not open

    I'm trying to update Indesign and Photoshop.  I get a message saying that the Updates could not be applied - you are already running the Adobe Application Manager - but I have closed everything.   It may be related to the fact that today, about every 2 minutes, Adobe Creative Cloud Connection pops up.  I have closed it numerous times, but it continues to open.

    Terminate the process(es) in Task Manager/ Activity Monitor.
    Mylenium

  • I have 15.00 on my itune gift card but when i try to download a song it`s saying the card has already been redeem,but you can still see the 15.00 at the top of itunes

    i have 15.00 on my itune gift card but it`s saying the card has been redeem but i didn`t buy  anything yet.You can still see the 15.00 in on my itunes.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • You can't open the application "Adobe InDesign CS4" because it is not supported on this architecture"

    A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8.  After what appears to be a successful installati
    on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
    architecture" comes up".  Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
    should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
    rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
    ation" when launching afterwards.  The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
    Following this I am told to run the CS4 Cleanup Utility.  I restart the computer each and every time after running each of the utili
    ties.  Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
    r.  When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
    n CS4" because it is not supported on this architecture" comes up".  Followed KB404711 article and no success.  What else can be don
    e to fix this issue?
    This morning contacted Adobe Support regarding this response:
    After having a detailed reserach on your issue i acme to the conclusion
    that the problem you are having is not related to Adobe software but its
    in fact related to your MAC version ( OSX-5.8). While reseraching your
    issue i came across
    to many forums where a lot of postings were about the similar error but
    with different products the only comon thing was all the Errors were
    with Mac machine , also when you check the system requirements  for
    Adobe Indesign Cs4
    by going to the following link
    http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE  you
    will find the Mac OS version supported are from Mac OS X
    v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
    to advise to you to either contact your system manufacturer or upgrade
    to Snow Leopard ( mac os x 10.6)
    I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response.  In the meantime I decided to see what the Support Forums can do for me.  Until then I am down.  Thanks for the help.

    In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
    I've un-installed and installed again - still the same.
    Even downloaded the dmg again and done thwe whole thing over again.

  • Does any one know of software that you can import a PDF and then draw  on it, dimensions, notes and symbols...technical drawing?. Blue beam have the perfect software for this BUT it's not Mac compatible

    Does any one know of software that you can import a PDF and then draw  on it, dimensions, notes and symbols...technical drawing?. Blue beam have the perfect software for this BUT it's not Mac compatible

    You need a PDF editor, at the high end use Adobe's Acrobat Professional, at the low end use the editing features in Preview (pre-loaded on your iMac). However you should probably look at the Mac App Store, you will find many of PDF editing applications. You simply need to find one that suits your needs.

  • You can't open the application NotificationExec because PowerPC applications are no longer supported

    I have Lion OS X 10.7 on my MacBook Pro 15'' and I've tried to install an application for an external Maxtor hard drive.
    But it seems to be compatable only with previous Operating Systems because now every 5 seconds I get the popup
    "You can't open the application NotificationExec because PowerPC applications are no longer supported".
    I have deleted all the applications of the external hard drive from the Applications folder, and from the trash as well.
    But it doesn't help because the message is continuing to pop-up.
    Please help me somehow.

    I had already formatted the external Maxtor external hard drive but it didn't help because the problem came when after formatting I tried to install an application (belonging to Maxtor) to the MacBook. The application was meant for an operating system previous to Lion.
    The solution is to remove everything belonging to Maxtor from your Mac.
    I deleted the Maxtor application from the Applications folder, but it wasn't enough. After struggling in google I found this solution and it worked!
    HERE IS THE SOLUTION:
    First remove all the Maxtor applications you've installed from the Applications folder (just trash them and empty the trash).
    Then go to Finder and from Macintosh HD -> Library -> Driver Support -> DELETE THE MAXTOR APPSYOU FIND IN THIS FOLDER AND EMPTY THE TRASH !
    But the Library folder is hidden, so if you don't know how to find it (I don't remember exactly because I did it at 1 am at night in the desperation after looking for the solutions in many forums for hours) you can go to Helpand write library, then from All Help -> what is the Library folder? and there it is explained!
    Now you are free!!!

  • You can't open the application NotificationExecbecause PowerPC applications are no longer supported

    I have Lion on my mac and I've tried to install an application for an external Maxtor hard drive.
    But it seems to be compatable only with previous Operating Systems because now every 5 seconds I get the popup
    "You can't open the application NotificationExec because PowerPC applications are no longer supported".
    I have deleted all the applications of the external hard drive from the Applications folder, and from the trash as well.
    But it doesn't help because the message is continuing to pop-up.
    Thank you for your help.

    I had already formatted the external Maxtor external hard drive but it didn't help because the problem came when after formatting I tried to install an application (belonging to Maxtor) to the MacBook. The application was meant for an operating system previous to Lion.
    The solution is to remove everything belonging to Maxtor from your Mac.
    I deleted the Maxtor application from the Applications folder, but it wasn't enough. After struggling in google I found this solution and it worked!
    HERE IS THE SOLUTION:
    First remove all the Maxtor applications you've installed from the Applications folder (just trash them and empty the trash).
    Then go to Finder and from Macintosh HD -> Library -> Driver Support -> DELETE THE MAXTOR APPS YOU FIND IN THIS FOLDER AND EMPTY THE TRASH !
    But the Library folder is hidden, so if you don't know how to find it (I don't remember exactly because I did it at 1 am at night in the desperation after looking for the solutions in many forums for hours) you can go to Help and write library, then from All Help -> what is the Library folder? and there it is explained!
    Now you are free!!!

  • Please help with "You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported." I have seen other responses on this but am not a techie and would not know how to start with that solution.

    Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
    I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
    Please help with what I need to type, how, where, etc.
    Many thanks
    AppleSueIn HunterCreek

    I am afraid there is no solution.
    PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
    You could contact the developers to see if they have an updated version in the pipeline.

  • You can't open the application Adobe Photoshop CS5 because it may be damaged or incomplete

    Hi all,
    I have installed Adobe cs5 and all the other programs (indesign etc etc) work but when I try to open photoshop it says:
    "You can't open the application Adobe Photoshop CS5.app because it may be damaged or incomplete"
    I am a noob, I first installed it but it was in polish, couldn't work out how to change the language but entered into the program without problems so I deleted, redownloaded and reinstalled and it said the above. I deleted, redownloaded and reinstalled again but it didn't help.
    What else can I do? again, I am a noob to all of this (and Macs) so Idiots Guide to Fixing your Photoshop CS5" Would be fantastic!!
    Many thanks
    Chelsea

    Chelsea,
    Your big (as in HUGE) mistake was in deleting the application instead of using the Adobe uninstaller.
    Look for the CS5Clean script at the Adobe site, download it and run it according to the instrructions.
    Good luck.
    Wo Tai Lao Le
    我太老了

  • You can't open the application "Adobe InDesign CC 2014" because it is not responding.

    For some reason InDesign has decided to stop responding. Acts like it wants to launch but then does nothing. When I try to launch it from the Finder rather than the Dock, I receive this message:
    You can’t open the application “Adobe InDesign CC 2014” because it is not responding.
    Please advise.

    Wild guess here, but the installers are known to fail to set the correct permissions on the preference folders. See Cant launch new inDesign CC | Adobe Community  and substitute Version 10 where you see Version 9.

Maybe you are looking for