Where is the TR between 2LIS_02_SCL source and 2LIS_02_SCL infosource?

Hi gurus,
I activate the infocube 0PUR_C01 for recive purchasing information using BI Cont 7.04 level 007.
The new method of extraction information to this cube is using the 2LIS_02_ITM and 2LIS_02_SCL sources.
I used standard transformation between 2LIS_02_ITM and 0PUR_C01. Using a DTP I will load this source to the cube.
But when I try to import the standar transformation between 2LIS_02_SCL and 0PUR_C01 it doesn't exist. I apreciate that it exist a 3.X infosource and a update roule, but I can't find the transfer rule of 2LIS_02_SCL surce.
How can I connect this source and this infocource using BI content? There is another connexion?
Someone can help me?
Thanks!!!

For 2LIS_02_SCL and InfoSource 2LIS_02_SCL, make use of Update Rules, instead of Transformation.
Change the DataSource 2LIS_02_SCL from 7.x to 3.x using transaction RSDS.
This will enable Update rules and transfer rules for this.
That would fix the issue.
Thanks
System BW 7.01 Sup Pak 9
BI Content 705 Sup Pak 2

Similar Messages

Where is the difference between Positive Liste and BP Release in SPL?

Hi Folks,
Where is the difference between setting a Business Partner on a
Positive or Negative List and release or block a business partner in SPL?
I thought that should be almost the same. Hope you can clarify it.
Thanks
Regards
Dieter

Hi Dieter,
The difference is the following:
If you put a partner on a negative or positive list it no longer gets screened. so, unless you screen the positive or negative list explicitly, the partner is no longer screened, and of course the one on the positive list is never blocked and the other one always free.
If you release a Partner the Partner then the following happens (depending on the customizing).
1. If you do not have set the memory function in the customizing then the partner stays unblocked until you launch a new screening run and, if it gets hit against a list entry, it will be blocked again
2. If you do have the Memory function ticked in the customizing then the partner gets screened and released when you do a screening run (in contrary to the positive and negative list it does get screened, but automatically released). But if there is a new or changed entry that matches with the released partner, the partner gets blocked.
Regards,
Marc

What's the difference between dot sourcing and non-dot sourcing?

My teacher is incompetent in this matter.
I've been struggling to make logic out of the use of dot-sourcing and non dot sourcing.
What is the difference? I've been bashing my head against the wall for the past hour.

Hi Loginux,
"simply" put, non-dotsourcing scripts / functions will run them in their own small box ("Scope"), which is discarded when the execution finishes. Dotsourcing will run it in the current environment. Example:
script.ps1:
$Hello = "Hello World"
non-dotsourced:
$Hello = "Hi Mark"
& .\script.ps1
Write-Host $Hello
dotsourced:
$Hello = "Hi Fred"
. .\script.ps1
Write-Host $Hello
Cheers,
Fred
There's no place like 127.0.0.1

What's the difference between data source and source system in BI

hello
what's the basic and exact difference in BW 3.0 and BI 7.0. i am very urgent indeed. can anyone help me - how the things should be done here. it's preety confusing.
Can anybody give me the step by step analysis.
Thanks in advance
C.S.Ramesh

Hi,
Chk the foll links...
See this very nice presentation prepared by Dr Berg on new features of BI 7.0 (these are the differences between BI 7.0 and BW 3.5):
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
Check the release notes:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
This presentation:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
Web Blog:
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
You can also refer below posts:
Re: BW 7.0 Release
/message/1383908#1383908 [original link is broken]
Upgrade from BW 3.5 to BW 7.0 (BI 7.0)
Some features of BI 7 are
1. In Infosets now you can include Infocubes as well.
2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
5. Search functionality hass improved!! You can search any object. Not like 3.5
6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
this is a good PDF on Upgrade from BW 3.5 to BW 7.0
latest on upgrade tp BI7.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Planning/Master_Guide_NW2004s.pdf
You can seek more information on BI 7.0 in the SAP NetWeaver2004s Ramp-Up.
/community [original link is broken]
Re: BW 7.0 Release
Re: BW 7.0 Release
Re: BW 7.0
take a look presentation
overview
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
detail
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken]
may useful .....
https://www.sdn.sap.com/irj/sdn/developerareas/bi
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Hope this helps.

Where is the link between Sales Invoice and Downpayment Invoices

We made a downpayment invoice. And processed incoming payment for such invoice.
Then proceed to Sales Invoice, which was applied to the Downpayment invoice. Everyting went well.
We tried to use crystal report to extract the Sales Invoice (OINV, INV1) and link to the downpayment table (ODPI) to print the breakdown in the invoice form. We could not find the relationship in this table.
Can someone help ?
KC

Could it be helpful for you to use view in enterprise manager ? I just see the docentry field as the link field among OINV, INV1 and OPDI.
If you use down payment request, I think you could not since it is a note and must be reconciled after invoice created
Rgds,

Replicating data between oracle9i(source) and 10g database

sucessfully replicated data between source and target in 10g
Now I have to replicate the data between oracle9i(source) and 10g database(Target) please help me to solve this issue

sucessfully replicated data between source and target in 10g What sort of Replication you talking about ? Is it Object level , Schema level or DB Level ?
Now I have to replicate the data between oracle9i(source) and 10g database (Target) please help me to solve this issue
http://www.freelists.org/archives/oracle-l/08-2005/msg01260.html
Hare Krishna
Alok

Replicating data between oracle9i(source) and 10g database(Target)

sucessfully replicated data between source and target in 10g
Now I have to replicate the data between oracle9i(source) and 10g database(Target)
please help me to solve this issue

sucessfully replicated data between source and target in 10g What sort of Replication you talking about ? Is it Object level , Schema level or DB Level ?
Now I have to replicate the data between oracle9i(source) and 10g database (Target) please help me to solve this issue
http://www.freelists.org/archives/oracle-l/08-2005/msg01260.html
Hare Krishna
Alok

Where can I find the relation between company code and plant?

where can I find the relation between company code and plant?
I need to the list of plants under a company code.
Which table?

yes,wayne weng .What you said is right.
Thank you very much!
My MSN:[email protected]

Where is the association between applications and Spaces screen configured in Mountain Lion?

Where is the assocation between Applications and Spaces screen configured in Mountain Lion?
In 10.6, I had FileMaker come up in Space 2, and it still does in 10.8 but I don't know how to change it.
Anyone know?

Right-click the icon in Dock and select Options

Where is the difference between MacBook Pro ME294D/A and ME294B/A and ME294Z/A?

Where is the difference between MacBook Pro ME294D/A and ME294B/A and ME294Z/A?

The country the computers originally shipped in.
(98433)

What is the difference between customer exits and user exits?

hello friends,
what is the difference between customer exits and user exits?

Hi
User exit - A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP.   XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.     *-- Mani
The following document is about exits in SAP :-
The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications.
SAP creates user exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
Types of Exits
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
    CASE okcode.
        WHEN 'BACK OR EXIT'.
            CASE sy-dynnr.
                    WHEN '100'.
                         SET SCREEN 0.
                         LEAVE SCREEN.
                    WHEN '200'.
                         SET SCREEN 100.
                         LEAVE SCREEN.
             ENDCASE.
      ENDCASE.

What is the diffrence between a javabean and EJB

hi!
what is the diffrence between a javabean and entreprise jvaabeans! i mean which are the uitilization featires of eaxh one !

i am seeking for a solution for my problem , in fact i ma trying to implement and develop an application with java that allows a certain range of IP adresses to be connected to a database server in order to extract the suitable data from the server .
let me explain mor ethe suitation , in fact what i am loking for is to use javabeans to grant my application much more consistence and pertinence : si i am asking if it could be possible to use javabeans in my case especially if i am not trying to developp a web application but a cleint /server one allowing some services.
The application is in fact dealing with a stock exchange market and what i am trying to do is to grant particilar registrated customers to have the informations that they need ( portofolio, currency's status, market indicators, .) also drawing some charts decribing rates, variations, and others specefic financial caracterestics .So , if we consider that this application is not a web application ( no HTTP request and no servers like apache or others ) how it is possible to use javabeans and not EJB to build the application? i mean what could be suitable and preferable to rely on and dvelop to ensure a good java application !!
if you need more details to help you find the answer for me don't hesitate to answer me back !!
Someone here gave me that answer
use RMI to code the services and (Updateable) Value Objects to pass the information between tiers.
RMI is an all-java distributed component framework (ie. EJB, CORBA, DCE/RPC, DCOM, etc.), that is very suitable for developing non-containerized multi-tier applications. Refer to the RMI trail in the Java Tutorial as a starting point for coding RMI solutions (http://java.sun.com/docs/books/tutorial/index.html). Under this scenario you would code the database access service as an RMI service (server-side). Client/server communication should be facilitated through the use of JavaBeans/classes that wrap the information being passed (customer information, portfolio details, market information, etc.) - these are refered to as 'Updateable Value Objects' (a design pattern). Graphing and charting would be handled in your client from the information received from the (RMI) server. GUI JavaBeans can be used to provide this functionality as well as other client-side services. There are numerous "shrink-wrapped" components for GUIs available on the market just peruse any Java magazine to find them.
but how comes? how can i do it !! and where can i find more information please about 'Updateable Value Object "
thanks

What is the Diffrence between Oracle 11 and 11i

What is the Diffrence between Oracle 11 and Oracle11i ?.
With Rgds
Arun J.Isaac

Oracle 11i is internet based and run with java platform where we can see the applets downloading alongwith oracle forms and it refreshes all the jar files in oracle default directory.
Oracle 11 is not intergrated with Java its an Oracle standalone platform.
Regards,
Arumugam S.

What is the difference between jsp :include and server side include

what is the difference between jsp :include and server side include(request dispatcher include method)????
i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
do suggest if u hav ny other diff in this context...

The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
- Saish

What is the difference between scheduling agreement and delivery schedule

Hi
1. Can anyone explain me the difference between scheduling agreement output
    and scheduling agreement delivey schedule
    Will the both look same in T.code SP02 when seeing the output for a document.
    Can anyone send me T.codes for above ones in purchasing.
2. when seeing the Detailed statement for rebate agreement,there is item number.
    In which table can we see the item number for rebate agreement

Hi,
If you have to deal with more complex situations, you can define a delivery cycle in the material master record in addition to the planning cycle. In so doing, you determine the days on whichthe vendor delivers his goods. The delivery cycle is entered in the material master record as a planning calendar in the Planning calendar field.
You enter a delivery cycle if the delivery date (or the goods receipt date) depends on the day on which you order the goods. For example, you carry out the planning run and place your orders on Mondays and Tuesdays. If you place the order on Monday, the delivery is made on Wednesday, if you wait until Tuesday to place the order, the delivery is not made until Friday
Where as Planning calander is Three character number (numeric or using letters) that specifically identifies a PPS-planning calendar. The difference between Planning calender and delivery cycle is If you have selected the MRP type "MRP" and have set a period lot-sizing procedure according to planning calendar, you enter here which planning calendar is to be used.
If you selected the "time-phased planning" MRP type, the planning calendar that you specify here defines the delivery cycle. This specifies the days on which the vendor delivers the material. You can enter the planning cycle in addition to the delivery cycle

Where is the TR between 2LIS_02_SCL source and 2LIS_02_SCL infosource?

Similar Messages

Maybe you are looking for