Where is the "Ultimate II" Operator Interface located?

Hi,
I am looking for the Ultimate II Operator Interface presented in the following document : http://zone.ni.com/devzone/conceptd.nsf/webmain/70​15bb2fdd49160086256e9d0083aed9
Is it available somewhere on the web?
Thanks,
Louis Girard

In the article it was said that "The Ultimate II operator interface shown Figure 13 is a slightly modified version of an example operator interface that is included with TestStand." To which operator interface are they refering to exactly? To the Full-Featured interface or to another interface? The Ultimate II really looked nice so I wanted to get a feel of it ;-)
Thanks,
Louis

Similar Messages

  • Where is the photosmart D7160 photo tray located?

    where is the photosmart D7160 photo tray located?

    Hi, here is a link to the User Guide, see page 7.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Where are the users startup items physically located?

    Hi all
    I messed around with my login items as I had a startup problem (very slow startup). I 've deleted the Microsoft AU Deamon, now I want to reinstall it from a backup - but where is the thing???
    Where are the users login items physically located?
    Thanks
    Simon

    Where are the users login items physically located?
    The physical login item process could be located any where. Your ~/Library/Preferences/loginwindow.plist initiates login applications or processes.

  • Where are the K7N2 Delta temps sensors located?

    Where are the K7N2 Delta temps sensors located?
    Okay I know one reads from the diode... altough the reading still seems to be low compared to other diode readers (like the 8K3A+ which gives you readins in the 50's).
    Where is the other one located?

    MSI Tech... how about it?

  • Where are the swipe preferences for calendar located

    Hi
    Where are the swipe preferences for calendar located?  Is it two fingers swipe down to goto the next month?
    Thank you in advance.

    I don't know that there are any preferences for setting what swiping does in the Calendar.
    Two finger swipes left and right skip months in month view. They skip weeks in week view. Two fingers up and down scroll up and down (which does nothing in month view).

  • HT1657 Where are the rented movies on iTunes located....I see it on my phone, but can not locate the movie on any other computer.  Thank you!

    Where are the rented movies on itunes located?  I see them on my iphone, but I am unable to locate them in my itunes, even via searching the name.  Thank you!

    You cannot.
    from the article you linked:
    If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer."
    iTunes Store: Movie rental frequently asked questions (FAQ)

  • How do I limit the number of Operator Interface and Execution instances to one?

    We have a problem in MFG.  The operator launches to instances of the operator interface and executes the same sequence.  A second scenario is where the operator is executing the sequence and then changes from the execution window back to the Sequence Display window and launches a second execution window.  We need to understand how to limit the number of executions within an instance of the Operator Interface to one.  We also need to understand how to limit the number of instances of the Operator Interface to one.
    Regards,
    Steve Easthope

    Steve,
    This is a duplicate post.  Please reference your first thread. 
    Derrick S.
    Product Manager
    NI DIAdem
    National Instruments

  • HT4262 where is the apple airport express ID located?

    just bought an apple airport express.  can anyone tell me where the airport ID can be found?

    Unfortunately, Apple no longer prints the Ethernet ID and AirPort IDs on the AirPort Express.
    You can locate the IDs by configuring the Express to connect to your network, and then use AirPort Utility to display the information that you need.
    You did not provide information on the type of operating system that you are using on your computer, so we cannot provide any more specific information about locating the IDs if you need more help.
    If yu are using a Mac, and do not know what version of the operating system you are using, you can find that information by clicking on the Apple icon in the upper left corner of the screen, then clicking About This Mac. The OS X Version Number will be displayed. Post back with that info.

  • I am trying to use the T. S. operator interface I need to add pass fail and error

    Hello:
    I  am using Labview 6.1 and Test Stand 2.0
    I have made some modification to a copy of the T.S. Labview operator interface. How do I get the pass/fail or error from test stand to be pass to LabView so I can tell the operator that the unit pass or fail the test. I do not want to use the Test UUTs. I want this to be very low operator response.
    Message Edited by Toro on 02-28-2006 01:52 PM

    Not sure if this is available in the earlier versions of TestStand, but I think so.
    You could post a UI Message, from your execution entry point in the process model, to your User Interface indicating the pass/fail/error status when a test run is complete.  You will need to handle the UI Message in your Operator Interface.  See TestStand II Customisation course notes for handling UI Messages.
    The data passed in the UI Message can be anything you like, the UI Message handler in the User Interface will have to process the message and update the display as required.
    Hope this helps
    Steve
    Message Edited by SercoSteve on 03-01-2006 10:02 AM
    There are 10 types of people in the world that understand binary, those that do and those that don't.

  • Why are my LabView Dialog Boxes no longer modal when using the Example LabVIEW Operator Interfaces?

    Hello,
    I have a step in my sequence that pops up a modal LabVIEW dialog box. My LabVIEW vi uses the TestStand - Start Modal Dialog.vi and TestStand - Stop Modal Dialog.vi as described in the example and it works as advertised when I'm using the TestStand Development environment however when I use the sample Operator Interfaces distributed with TestStand the Dialog boxes lose focus. I have the VI Properties->Window Appearance set to Dialog and have followed all of the instructions I could find for making a dialog modal. I've also reviewed all the documentation I could get my hands on including previous posts on this board and didn't see anything obvious.
    Does anyone have any suggestions as to what I may be missing? Has anyone else experienced this problem and come up with the solution?
    I am using LabVIEW 8.0 along with TestStand 3.5.
    Thanks,
    RG

    Hi RG,
    Running the example modal dialog in the teststand3.5 examples folder and using labVIEW8.0, I notice that when  the Dialog is displayed its not active, but it is modal to the OI. Clicking on the Dialog panel makes it active. If you try to click on the OI panel behind, you can not. Is this what you are seeing?
    I am using the Full labVIEW IO as supplied with TestStand and the example VI in the modal dialog folder is as supplied.
    The LabVIEW Adapter is still configured to use the active labVIEW developement environment.
    If I run the same example, only this time using LabVIEW7.1, the Dialog panel is active.
    There is a patch to take it to labVIEW8.01, at this moment in time I am not sure what the update fixes.
    There does seem to be a problem with TestStand3.5 (engine) and LabVIEW 8.0.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Where is the find/replace-special feature located now?

    Where is the find special feature located now?
    I used to be able the search for "<space><tab>" and replace with "<tab>"
    I can no longer locate that feature and if I try to paste it into the find dialog, it says that no instances are found although I might be looking at several.
    I made extensive use of this and "Convert text to table" and "convert table to text."
    Ars-Technica reports that many of the "advanced" features have been removed. If that's correct, is Apple trying to relagate it's apps to the "Un-professional" level? Are we going to end up looking elsewhere for the features we had come to rely on? Granted, some of them still didn't work as expected, but the ones that did, I really made a **** of a lot of use of, including, but not limited to mail merge, which I'm told is also gone.
    Why can't apple just keep the great, if not at least standard, functionality intact? Give users a preference to hide the "Standardized" features if they are going to confuse them. Note that I'm not even going to say "professional" here because a robust find and replace to me is considered common place. Find and replacejust text is simply dumbed-down and, for me is a bit of an insult, especially after hemming me in to not being able to edit my documents once I open them in iOS and killing iWork on my machine after the update - sure the apps are there, but they crash complaining of a missing library.
    On that note, if anyone knows how to fix that so that I can keep working with iWork '09, I'd be relatively happy to be able to work with some of my old work that won't function in the new Pages.
    Any help on any of this is greatly appreciated.

    Pages 5 has over 90 other features removed:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=b14426a2c5af2 65f2213d98ee45f08d7&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Export your Pages 5 files to Pages '09 or Word .docx and trash/archive Pages 5.
    Then rate/review Pages 5 in the App Store.
    Peter

  • Where is the running JAVA file is located

    Hey,
    lets say my java file would be in C:\package1\whereIam.java
    if I run this program, how can I ask (command ?),
    in which directory the running java file is located.
    i.e. I would like to get C:\package1
    Aykut

    It's actually more complicated than that. The class could be in a jar file... would you want the directory the jar file is in? Well, I'll let you deal with those issues. You can get a URL to your class like this, I think:URL me = this.getClass().getResource("/" + this.getClass().getName());

  • Where are the internet search engine bookmarks located

    simple & dumb question I know, but I'm new to mac and still discovering. Where is the folder which contains all the search engine bookmarks?

    "Search engine bookmarks?" What do you mean by that? Your bookmarks (i.e. sites you add to your Bookmarks list), or the list of choices that 'pops-up' when you start typing a search query into Google, for example? Also, which browser are you talking about (Safari, Firefox, etc.)?

  • Where are the implementations for some interfaces in the search_sdk.jar?

    Hi,
    Is the source code for the implementation of some interfaces (DocumentMetadata etc) available to public?
    Thanks.
    Jun
    Message was edited by:
    Alwaysthink

    Source code is not available. The javadoc is distributed with the installation media. On my machine I can find the javadoc for DocumentMetadata here:
    file:///F:/SES_1018_WIN32_DVD2/doc/search.1018/b32260/toc.htm

  • Where are the Printing Presets in Acrobat located on Mac?

    I have just upgraded to Yosemite 10.10.3 from Snow Leopard 10.6.8. All of my applications seem to be working fine, however my printing presets in Acrobat Pro X 10.1.13 are missing. Can I restore them from a Time Machine backup and if so where would they located? There seem to be a number of Library files related to Acrobat, but I'm not sure which ones contain the printing presets. I'm printing to an Epson Stylus Pro 3880. I don't want to have to re-create all the printing presets for that machine if I don't have to. I'm hoping someone can give me some advice on how to restore my much needed presets.

    Kelvin:
    Did you save the presets and give them a unique name so they could be selected at a later time?
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Maybe you are looking for