Where is the Unloading Point ABLAD description?

All,
I currently extract the unloading point code via the field ABLAD in table MSEG. The problem is that this returns just a numeric code. I believe there is a table somewhere that has the text description but I'm not aware of the table name. Does anybody have any ideas what it could be?
Any help would be much appreciated.
Regards,
PP

Hi,
I guess we dont create any unloading points and assign it to plant and SL and use it during GR.
We enter Unloading point in MIGO in where tab is just the description of place Specifying  the point at which the material is to be unloaded (for example, ramp 1).
If u can check thr is no help option available for that field in MIGO, so whatever u enter thr u will get it in ABLAD in MSEG

Similar Messages

  • Merging of Prodn Order number and operation number into the unloading point

    Hi,
    I am creating the production order using the Tcodes Co01 or co10 and my requirement is that after creating the production number and then when I open that one in the change mode using co02 Tcode the unloading point which is present in the Goods Receipt tab should come as a concatenation of order number and operation number .
    Thanks for the help in advance.
    Regards,
    Venkat.

    Hello Rachit,
    The relation is as follows
    AFKO-AUFPL (Routing number is Order header)
    Use this routing number to get operations from AFVC
    AFVC-VORNR gives operation number
    AFVC-LTXA1 gives operation description
    For sub-operations, VORNR will be sub-operation number, and AFVC-SUMNR for this sub-operation corresponds to the respective superior operation(refers to AFVC-APLZL).
    AFVC-APLZL is a unique number for each operation.
    Hope this helps. You can check with some existing/new orders as well.
    let me know if you need anything about split operations as well.
    Best Regards,
    Subhakanth

  • Making the unloading point as mandatory in MB21

    Hi,
    I need to make the 'unloading point' (RESB-ABLAD) as a mandatory field in the transaction MB21.
    Can anyone let me know how to make the configuration changes for this?
    Thanks in advance,
    Regards,
    Swati

    Hi,
    Pls check on blw tcodes, which will have field selection setup changes..
    OMJX for MIGO
    OMCJ u2013 for default the field selection for goods movements like 305,306,501u2026
    as well , u can use SHD0  for MB21

  • Where is the 8 points Mask in FCPX Ver 10.1 ?

    Hi there,
    I am on FCPX 10.1.
    Can I know where is the 8 points Mask in FCPX Ver 10.1 ?
    I tried locating in the Effects Panel but all it has under in the Keyer sub category is circle mask, image mask ... etc.
    But I cannot find the 8 points mask.
    Any ideas ?
    Thanks

    furrytoes wrote:
    There's also this one from Alex4D - has 4,8 and 16 point masks
    http://blog.alex4d.com/2012/03/06/mask-plus-fcpx-effects/
    Definitely works on 10.1 - I have a 16-point mask, using it, right in front of me
    How do I install it ? I do not have MTT and do not want to use MTT.
    It says "If you don’t want to use MTT, install these effects in Home / Movies / Motion Templates / Effects / Keying:"
    How do I do this ?
    Thanks

  • Adding the Unloading Point Field in Goods Issuance Transaction (MB1A)

    Good day,
    Is it possible to activate the unloading point field in the Goods issuance transaction code (MB1A)?
    As per checking, the unloading point field can be used if we will do the good issuance transaction with the use of Reservation Orders (created in MB21)
    Is it possible to make use of this field without using reservation orders?
    Thanks.

    Hello Roberto,
    check transaction OMBW, here you can customize available fields depending on movement type.
    Best Regards, Dirk

  • To add the "unloading point/supplier Node" field to the sales order incompl

    Hi All,
    Very Urgent treat this has high priority!
    Regarding the field "unloading point/supplier Node" in the header data of sales order VA01- Tab Shipping.
    You know if the field "unloading point/supplier Node" is missing, then Ebilling will failed. And at that moment, the system gives the order as complete even if this field is missing.
    Is it possible to add when we use the button "Incompletion log", when a manual sales order is created like showing some message stating that 'Unloading point missing or incorrect’
    Points will be rewarded for suitable answers..
    Awaiting for all your replies..
    Regards,
    Ravi Ganji

    you should be writing the code in MV45AFZZ in one of the routinues...

  • Where is the "brush pointer"?

    I am using CS6 Extended on an HP DV7 laptop. I am taking a course in photoshop and need to use the sharpen tool in conjunction with a brush preset. The instructions say to click on the sharpen tool (ok I can do that) then to click on the sixth preset in the brush presets panel (okay I can do that) then drag the "Brush pointer" (a rectangle with rounded corners) across the area I need to sharpen. That's where I get stuck. I actually was able to do it the first time I tried, but now I can't find the "Brush pointer" again. I've tried several options but now I am just getting a circle, not the rectangle with the rounded corners.
    Thanks.

    I have been experiencing this same issue on a new mac mini running lion and aperture. Today I went to a local mac store and tried to recreate the issue on all of their machines, the result was that the Imacs and the 15 and 17 inch MBPs did not demonstrate the problem, however the 13 inch MBP and the 11 and 13 inch
    MBAs both did. The machines demonstrating the problem were all dual core, and all utilising intel HD 3000.
    I am satisfied that it is not an issue with corrupt software on my machine or faulty hardware specific to me.
    Hopefully this can be remedied soon.

  • MB25 - Field "Unloading Point" (ABLAD)

    People,
    after upgrading R/3 from 4.6 to 6.0, in transaction MB25 I cannot see the field "Unloading Point" in ALV Grid. When I use "Change Layout" button, this field is not displayed too...
    What is wrong?
    Thanks!!!

    Hi
    Unloading point field is not available in MB25, there is no problem in your upgrade.
    In ECC 6.0 itself this field is not present.
    Thanks & Regards
    Kishore

  • Where are the bullet points?

    Where can I find the bullet points in the new keynote????

    Hello all,
    I fixed this by placing each bullet point into its own text box. The indentation issue still exists though.
    Thanks,
    Nathan

  • Where are the status points?

    Hi otn moderator,
    May i know why the status points are removed from the otn profile? Are you going to change the system of awarding points or going to abandon the points system itself?
    -Karthick

    Yes. Any information would be good. May I missed any news about this?!
    Reward system still in the FAQ. so I guess this is only a temporary situation.
    But it would be good to get some insider info.
    Found this at twitter... http://twitter.com/oracletechnet
    @Boneist we are in the midst of a gigantic content migration, a little unstable at the moment - working it #otn_forums about 16 hours ago via TweetDeck in reply to BoneistEdited by: Kecskemethy on Oct 20, 2010 1:40 AM

  • Where is the table-field short description store in ?

    Hi all ,
            Has someone can tell me where can i find the field short description in the database ?
            Or maybe this informations are only stored in the kernel files ?
            Any suggestion are welcome .
    Best Regrards,
    Carlos

    Hey Lars,
    Ah - Mr. Döhr again
    If I'm already recognized here I should try to stop posting...
    It's true: the F1 just display the structure.
    Actually I got the info this way:
    smile
    Just wanted to get that right because just today a collegue asked me the same thing and "why can't one display structures...?"
    Markus

  • Nokia E6 - Where is the Access point setting for Y...

    I have my Nokia E6 configured for my Corporate Email, MfE and it works fine.  In the settings for MfE, I see a setting for Access Point, where I choose Internet with Priority 1 as my Home WLAN and Priority 2 as my GPRS connection.
    Then, I started to configure my private Yahoo mail, evertyhing is done, it works fine, but I do not see any settings for Access Point for the Yahoo mail..
    Does this mean it picks up the settings from MfE??? 
    Can any other NOkia E6 users or experts comment on this??

    Hi Stuart,
    To answer your question:
    There is no shared secret for the ACS itself.
    If the ACS is going to communicate with another device, you have to define a AAA client and define a shared secret.
    ACS 4, used that shared secret to protect/secure the replication, in ACS 5, the replication secured with encryption and not shared secrets(hash).
    Rate if useful

  • Where are the Publics Points (Poi´s) added in the...

    Hi, I am from Brazil and I added several publics points (Poi's) or points of interest (as restaurants, hotels, fuel points...) in the nokia maps web (maps.nokia.com). However they does not appear after in the search. When me and other people can see the new publics points?
    Solved!
    Go to Solution.

    Hi, thank you for your reply.
    Really the landmark was record in favorites. But the landmark (all) did not appear yet. I can not see it in the map until now. They were record last week. However, when i try add the same marker again the map inform me the marker already exist.
    I did not receive message about 24 hours only about more information. Perhaps the problem is the service does not work complete with my country or i should use internet explorer rather google chrome.

  • Where are the forum points gone?

    My forum points getting displayed as 0...same with everybody in all forums...
    I remember the same thing happened approx 2 months ago also...

    Simple disconnect in the DB should be fixed now - in the future please report these issues to [email protected]

  • Unloading Points (KUWEV-ABLAD) on Sales Order Header via BAPI

    Hello all, first day posting on this forum, but I thought I'd answer a question before posting my own.
    We've built a nice .net based solution to entering sales orders into SAP using BAPI's, however I cannot find where we can set the Unloading Point ( field KUWEV-ABLAD) at the header level for a sales order. We're using BAPI_SALESORDER_CREATEFROMDAT2 to create the sales order, and that works fine, but there's nothing in ORDERHEADERIN to set this field.
    I found a field in ORDERPARTNERS, called Unload_Pt , which relates to an ABLAD field, but passing the value to this parameter doesn't seem to work, which makes me think that it's a different unlaoding point.
    Can anyone help me here? Does the parameter not exist? Do I have to extend the BAPI (something I've never done before) or is there a simple method of updating the field directly somehow?
    Any help would be appreciated,
    Thanks
    Matthew

    I've found the answer to this problem, in case anyone comes across this forum when searching in the future.
    the answer WAS to use the UNLOAD_PT field, but (and this should have been obvious) you have to add a line for the Ship-to-Party in the ORDERPARTNER structure, this has the function parameter "WE" (you'll have a line for sold-to "AG" already)
    you can then enter the text of the correct unloading point into the UNLOAD_PT field
    hope this helps
    Matthew

Maybe you are looking for