Where is the USB 3.0 port on the HP HDX X18T-1200 CTO ?

Does the HP HDX X18T-1200 CTO Premium Notebook PC have any USB 3.0 ports?
This question was solved.
View Solution.

No it does not. It predates USB 3.0 by quite a bit. You can add usb 3.0 ports with the expresscard slot and an add-in card. 

Similar Messages

  • The maximum acceptable hard drive size for hp hdx x16t-1200 cto ?

    my laptop is hp hdx x16t-1200 cto
    i want to know the maximum size of hard disk i can install in it (1TB or 750GB or 500 GB) ?
    This question was solved.
    View Solution.

    Hi,
    That means you can use up to 1TB (currently on the market, remember buy the 9.5mm one). These are how to do & tips:
      http://computershopper.com/laptops/howto/replace-your-laptop-s-hard-drive
      http://reviews.cnet.com/4520-11379_7-6445033-1.html
      http://www.cnet.com.au/upgrade-your-laptops-hard-drive-339298932.htm
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I disable only the USB 2.0 ports - K7T266 Pro2-RU

    None of the USB ports on this MB will work with my Biostar 6-in-1 card reader - however, I have a VIA USB 2.0 PCI card that works fine with it. I want to disable the 2.0 ports only, and install the PCI card. The manual is not very helpful - if I only enable USB 2, which seems to be the USB 1.1 header, that DOES disable the USB 2.0 ports, but it also disables the 2 USB 1.1 ports on the MB!

    Yes, and they are labled USB1, USB2 and USB3 - now I assume that these correspond to the JUSB1, JUSB2 and JUSB3 headers on the MB, with JUSB2 being the 1.1 ports on the D-LED bracket, and JUSB1 and JUSB3 being the 2.0 headers. I can only ENABLE certain USB ports in the BIOS - i.e. if I only enable JUSB2, this effectively disables the 2.0 ports - aha - it also disables the 2 1.1 ports on the back of the MB itself!!
    Any other answers?

  • What is wrong with my 30" Cinema Display?  The USB and FireWire ports still work, but the screen is pitch black. When you plug it into the computer, it detects that it's a Cinema Display.

    When you plug it into the computer, it detects that it's a Cinema HD but the screen is pitch black.
    For some reason, the USB and FireWire ports still work.

    If you shine a really bright light directly into the screen can you then see a faint image on the screen? If so, that would indicate the backlight has died (hardware failure) and the unit needs repairing.

  • HI, Where is teh ON LAN Wake port for the MSI KT3 ARU?

    HI, Where is teh ON LAN Wake port for the MSI KT3 ARU?
    i tried looking through the manual but i couldn't find it.

    Hi,
    It's not needed anymore, modern configurations can do the same without that port.

  • Which are the USB 2.0 ports and USB 3.0 ports?

    Purchased a hp DV7-6143cl. Which are the USB 2.0 ports and USB 3.0 ports?
    Thanks

    USB 3.0 may be a different color.
    Left side USB ports are 3.0
    Right side are 2.0
    See your Service guide  (page 19)
    Main page for your model

  • About the failure of USB redirection on the USB 3.0 port (Clientron Corp.)

    Dear All,
    Below is the result of applying our Intel & AMD based models and the related drivers for testing the function of USB ports with
    Remote Desktop Protocol. We have tested the RDP 7.0, RDP 8.0, and RDP 8.1.
    Please help to confirm if it’s possible for Microsoft to provide the patch files or such kind of workaround method to support the USB
    3.0 port function for Remote Desktop Protocol under Windows 7. Thanks.
       Model
    Win7
    Win8.1
    USB 2.0 port
    USB 3.0 port
    USB 2.0 port
    USB 3.0 port
    F810
    (Intel Bay Trail)
    PASS
    Applying (Intel) native driver
    NG
    PASS
    Applying (Intel) native driver
    PASS
    Applying (Intel) native driver
    L810
    (Intel Bay Trail)
    PASS
    Applying (Intel) native driver
    NG
    PASS
    Applying (Intel) native driver
    PASS
    Applying (Intel) native driver
    B600
    (AMD G-series/eKabini)
    PASS
    Applying AMD Driver
    NG
    PASS
    Applying AMD Driver
    PASS
    Applying AMD Driver
    Best regards,
    Larry Chen
    Marketing Div./Product Management Dept.
    Clientron Corp.

    Hi Larry Chen,
    Did you install related USB 3.0 driver in Windows 7 computers? As I know, there is no built-in USB 3.0 driver in Windows 7.
    Alex Zhao
    TechNet Community Support

  • Usb 2.0 port on the right side (beside thunderbolt port) of macbook air 13" 2011 is busted, one of the pins inside the usb port is bent, is this replaceable? saw the pix on ifixit that it is part of the logic board.

    usb 2.0 port on the right side (beside thunderbolt port) of macbook air 13" 2011 is busted, one of the pins inside the usb port is bent, is this replaceable? saw the pix on ifixit that it is part of the logic board.

    The fix is a new logic board. It might be tempting to turn off the computer and start poking around inside to fix it yourself but you risk separating the port from the logic board and doing even more damage.

  • I installed iousb family log release osx 10.5.6 and installed on my mac osx 10.5.8. I am trying to log and rfid reader on the usb. Sadly on restart the usb is no longer working. Happily Windows is still running OK. Is there a way 2 get my usb back?

    I installed IOUSB family log release osx 10.5.6 on my mac osx 10.5.8. I am trying to log an rfid reader on the usb. Sadly on restart the usb is no longer working. Happily Windows is still running OK. Is there a way to get my usb back working? And is there a way to navigate in Windows to the file I installed and remove it? Any help appreciated.

    BDAqua wrote: Does OSX boot at all, or not?
    Yes, it does. Right to where I am supposed to log in, but since the USB is not working (either mouse or keyboard), I'm stuck. I have to shut down and restart and boot into windows.

  • I bought a camera connection kit. First time it worked fine, using the USB connector, but now neither the USB or SD connector works. The iPad shows a connector is attached, but Photos doesn't open. Any ideas? thanks

    I bought a camera connection kit. First time it worked fine, using the USB connector, but now neither the USB nor SD connector works. The iPad shows a connector is attached, but Photos doesn't open. Any ideas? thanks

    If you have not done so, try exiting the Photo app (and maybe more apps if you have a lot open) from the Open Apps List and see if a discount/reconnect opens the app. If that does not work, try powering down the iPad and test. If it is still not working try a hard reset by pressing both Home and Sleep/Wake buttons at the same time until the Apple graphic appears, ignoring the Slide to Power Off button.

  • Why does the usb printer go offline through the airport extreme?

    My hp 2500n printer is listed as not connected. I have it hooked up to myAirport Extreme via usb. If I disconnect and reconnect the usb, it sees it and all is well as long as the printer is never turned off. If the printer power is cycled, the usb connection is lost and the only way I have found to reestablish the connection is by manually disconnecting and reconnecting the usb cable. There are no intervening devices between the printer and the usb connection on the Airport Extreme
    Any ideas out there?

    I had the exact same problem
    It turns out I was using a 20 foot USB cable between the printer and the Airport Extreme and the signal had become to weak to work. Try using nothing more than a 6 foot cable or try a new cable

  • HT1386 Ive been through the troubleshooting.  My ipad (1st G) &my ipod touch wont come up in itunes when connect them 2 my comp.  It's not the USB cord or ports, everything is updated &my app store wont come up on ipad when on wifi. how to fix these probs

    My ipad (1st Generation) and my ipod touch will not come up in itunes when I connect them to my computer.  My computer is a MAC and it is brand new with the updated system.  Also, when I am connected to my wireless internet at home, my app store will open on my ipod touch, but it will not open on my ipad. 
    My USB ports work with other devices that I have, such as my camera, and I have tried plugging in the ipad and ipod to different USB ports on the computer, but itunes still won't recognize them.  The USB cord that I use works.  I know this because I use the same cord to plug into the wall charger and it charges both the ipad and ipod fine.  Also, my itunes has been updated to the most recent version (I update it every time that it's an option).  I HAVE noticed, though, that my ipad and ipod never ask me to update itunes on the actual devices themselves. 
    What can I do to solve this issue???  THANKS!

    Back up first (Time machine) as much as possible.
    Un-install and re install Itunes.
    First and foremost download the updated iTunes from apple website. After downloading Uninstall itunes and all its component ( Dont worry, itunes library where your movies and music is located will not be deleted. Please follow instructions on the apple support page). The problem might be the AppleMobileDevice.kext
    Heres the instructions on how to un install iTunes
    http://support.apple.com/kb/ht1747
    Hope it hepls

  • Why is it that my powerbook does not recognize when i insert external hard drives through the USB 2.0 port

    when i insert an external harddrive through the usb port, my mac doesnot recognise that its even there but when a flash disk is inserted, it recognises it perfectly.
    why does that happen?

    Michael is on the right track. Some external hard drives lacking their own power supply simply cannot get enough power from a single USB port. It is most noticeable in the "name brand" drive that the office supply and computer superstores put on sale every other week. Their chipsets seem to be better optimized for Windows than Macs.
    Flash drives work because the don't have a power-hugry motor that must turn.
    There are two easy and inexpensive cures that allow you to keep your current drive:
    get a "Y-cable" that let you connect one drive to two of the computers UWB ports. Example:1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    get a self-powered USB hub. It has a separate power supply that boosts what goes to the drive. Example: Macally TriHub - 4 Port Hi-Speed USB 2.0 Hub for Mac & PC
    If you need the computer and drive to work together in an environment lacking a power source for the hub, and the y-cable isn't an option because you have too few available USB ports, then your only option is to replace the current drive with one better optimized for Macs, like these:
    http://eshop.macsales.com/shop/firewire/on-the-go
    This particular one has the option of running on power from the computer's USB ports or, with an optional power supply, wall power. A good compromise for both remote and desktop use.

  • Where is the output mini display port in the new imac 21,5 ?

    Hello all,
    I have buyed a new imac 21,5. In the apple web store says that the imac have a output for mini display port but I can't find it.
    I need to connect an other screen in my imac.
    Who can help me in this question ?
    Thank you very much in advance.
    Xavier

    Dear John,
    thank you very much for your quickly answer.
    But now, please, could you say me which is the exactly adapter that I need for to can connect a VGA monitor with the Thunderbolt port ?
    There are many models but any specify about the Thunderbolt connection.
    Kind regards,
    Xavier

  • Is it possible to use the built-in Ethernet port in the RE1000 to Minimize Decreasing throughput

    Kindly 
    Is it possible to use the built-in Fast Ethernet (10/100 Mbps) port to extend the network with an Ethernet cable without placing the extender in an area where you still have at signal ?
    because i dont want to decrease the wireless through-put by 50 % .
    I would like to Expand the network  network by running an Ethernet cable from an RE4200(Basement floor ) router to the end of  the RE1000 built-in Fast Ethernet (10/100 Mbps) port in the second floor..

    The Linksys RE1000 Wireless-N Range Extender includes a built-in Fast Ethernet (10/100 Mbps) port, which works as a wireless bridge to instantly connect any wired Ethernet device to your network. To ensure the proper configuration of the range extender, you need to know the wireless settings of your router or access point.  These settings are:
    • SSID
    • Wireless Channel
    • Wireless Security and Network Key
    Here is the link for manually configuring a range extender: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=206954591ff54e36884bb4636fcfd3d9_Manually_configur...
    Once your range extender gets sync with your router you can make the RE1000 as a Bridge...

Maybe you are looking for

  • RH 7 project upgraded to RH 9 does not show the doctype as XHTML

    I'm using Robohelp version 9.0.2.271 and I successfully upgraded a project in Robohelp 9 from Robohelp 7. However, in the source at the top of the files, the doctype shows as HTML instead of XHTML as follows: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4

  • Smart ?

    i want to be a new tv and a blu ray home theater.  my question...  do i need to buy a smart tv if the blue ray player is a smart device?

  • Copy/paste automation data in audio regions

    Hi, A dumb question but I'm having trouble figuring out...how do I copy and paste automation data in audio regions? When I copy and paste an audio region I like, it pastes down the selected region but without the automation data with it. I've been re

  • Does anyone know what the default font is for MacMail?

    Does anyone know what the default font is for the Mail program? My son changed my mail font and I want to change it back, but I can't remember what the original default is! Anyone? Thanks!

  • WebApplicaton deployment on Application server 9

    hi, i want to deploy a WAR file on an Application server 9 via command line but i cant find the right command for it via asadmin. the only command i have found is wsdeploy but it only create another WAR file and doesnt deploy it as a webservice. can