Where is the user manual?

I just bought a 16GB iPhone and can't seem to locate the user manual within the box. Is there one that comes with the phone or am I just mistaken?

It should be in the black envelope, but, if no, you can view it here.
Personally, I prefer the online User's Guide as what accompanies the phone itself isn't that great.

Similar Messages

Where is the user manual for Adobe Digital Editions?

Where is the user manual for Adobe Digital Editions?

Thanks to you both for your replies.
I should have explained that I have already seen 'Getting Started with Adobe Digital Editions', an epub document that comes with the software. It is only nine pages long, more of a quick guide than a manual. I had expected that there would be more to the software than is covered there. Perhaps there isn't. (To explain a little further: I was looking for a way to cause epub pages to print or display like the pages of the original book, but couldn't find anything about printing beyond. That feature is present in the Bluefire Reader for iOS devices. I tried printing a particular page using Ctrl+P and specifying the page number. The page printed, but it was spread over two sheets of A4 paper and the page number was not printed.)

Where is the User manual for X61s

This may be a dumb question but I just bought this as a used machine and nowwhere can I find a user manual. Doesn't seem to be one going thru the Thinkvantage menu. Going thru the Lenovo site I do the auto dectect and that reports what I already know about the model # and op. system. Then I fill out all the blanks for my product and then finally there is no 7666-W1U option, so choosing something close, I get a bunch of useless PDF downloads re: maint. and power settings etc.But no manual. Where are they hiding it?
For starters, I just want to see a #$%^@*& manual to find out what all the buttons and functions do.

Access Help is what you're looking for.
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

Where O Where is the user manual for the 3310?

I have the install guide but can't seem to find the manual so I can set http and other stuff.
thanks
Gary

Access Help is what you're looking for.
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

Where can I find the Users Manual for the DROID TURBO?

Where can I find the Users Manual for the DROID TURBO?

https://motorola-global-portal.custhelp.com/app/product_page/faqs/p/30,6720,9277/session/L3RpbWUvMTQxNTI0NTY1Ny9zaWQvc0xvbk1JNm0%3D#/how_do_i

Where can I find the user Manual for PS CS6 for download

Where can I find the user Manual for PS CS6 for download
where can I find the user manual for PSCS6

Hi,
This the cs5/cs6 pdf user manual:
http://helpx.adobe.com/pdf/photoshop_reference.pdf
From this page:
http://helpx.adobe.com/photoshop.html

Where to find the user manual for Camileo X-SPORTS

Hello!
Unfortunately can't find in Toshibas's download sections *user manual* for action camera *Camileo X-Sport*. Need more info about some operations and technical things, to decide about purchasing.
Any ideas, where can I find this extended manual?
Many thanks for help!
elivarz

Unfortunately I did not find the user manual but here is the Camileo X Sports product specification page
http://www.toshiba.eu/camcorders/sportscam/camileo-x-sports/pa5150e-1c0k/

Where can i get the Users Manual for the adobe acrobat xi pro

Where can i get the Users Manual for the adobe acrobat xi pro

You can find a PDF of the Acrobat XI Manual here: http://helpx.adobe.com/en/pdf/acrobat_reference.pdf

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?

Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron

How do I download and save the user manual as a pdf file?

where is the "divice manual icon ???
>> Branched from an earlier discussion <<
Message was edited by: Verizon Moderator

Go to this link:
Samsung Galaxy S III 16GB in Black Support | Verizon Wireless
and look under the Get to Know Your Device section. Click the Device Manual button and let the manual download. Once it's done, use your browser's save feature to save the file to your computer.

Where are the users startup items physically located?

Hi all
I messed around with my login items as I had a startup problem (very slow startup). I 've deleted the Microsoft AU Deamon, now I want to reinstall it from a backup - but where is the thing???
Where are the users login items physically located?
Thanks
Simon

Where are the users login items physically located?
The physical login item process could be located any where. Your ~/Library/Preferences/loginwindow.plist initiates login applications or processes.

Where is the User Group stored

Hi all
I have a question about the User Groups.
I want to know where are the User Groups and their information stored in Business Objects.
Is there a system table from where I can access/pull this information.
Thanks.

Hello,
You can use the Query Builder (on the BusinessObjects Administration Launchpad under Administrative Tools) to query the CMS database.
The following query would return some details of all user groups in your system:
SELECT
SI_NAME, SI_DESCRIPTION, SI_ID, SI_ALIASES, SI_GROUP_MEMBERS
FROM
CI_SYSTEMOBJECTS
WHERE
SI_KIND = 'usergroup'
You can find documentation on querying the CMS in the Developer Library:
http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/devsuite.htm#en/BOE_SDK/boesdk_java_dg_doc/doc/boesdk_java_dg/SDKFundamentals34.html#1033059
[Dev Library Home|http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/devsuite.htm] > Enterprise SDK > Java Developer Guide > SDK Fundamentals > How do I use the query language to retrieve classes from the CMS repository?
Cheers,
Fritz

C440 Where is the user guide for the keyboard?

Where is the user guide for the keyboard?
Moderator Note; subject edited; post moved to own thread
Solved!
Go to Solution.

hi cynLenovo,
Welcome to Lenovo Community Forums!
Is the keyboard the one with LVT?
This keyboard has the Media keys like anyother Media Keyboard.
You can check this thread
http://forums.lenovo.com/t5/Lenovo-3000-and-Valueline/H5-series-keyboard/m-p/1171171/highlight/true#...
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Maverick update release of iMovie 10. Where is the user Guide?

Used imovie to produced many good videos right before Maverick update. iMovie 10 need lots of learning. Any one has idea of good user guide other than taking some on-line classes?
How to work every thing with the external hard drive? I did that before, but I can't do it with iMovie10.
All the library from iMovie 10 looks like whole bunch of garbage, why?
Can I remove all the old files related to iMovie and start from scrtch? Like a brand new user to iMove.
How to create an event? Even have problem capture video from Canon Vixia G10. I didn't have the problem with the previous version of iMovie.
KL

katherinefromnorth potomac wrote:
iMovie 10. Where is the user Guide?
in iMovie, click on Help, or:
http://help.apple.com/imovie/mac/10.0/?lang=en#

How can I create a scrolling effect where when the user scrolls down the image will blur out?

How can I create a scrolling effect where when the user scrolls down the image will blur out?

Hi there,
You can create a scroll motion where the image will fade out on scrolling, you need to use the Opacity tab under Scroll Effects Panel.
If you particularly need the image to be blur out, then you need to edit that image in any image editing program and make one copy of that image as blurred, then place both images (actual and blurred) on that page and use scroll motion or fade option to replace images.

Where is the user manual?

Similar Messages

Maybe you are looking for