Where is the value field in antique photos?

I'm working through the PS Touch for iPad tutorial on antique photos.
Step Two requires changing the intensity. The "Tip" says that the intensity can be changed by tapingnthenvaluenfieldmto,open the keypad editor.
Where is the value field ? How do I change intensity outside the value field?

Tap on the percentage-value. The keypad opens and you can manually set the value.

Similar Messages

Where does the Value of EECST gets stored

Hi,
Where does the value of EECST gets stored for the infotype p0167. How can it be retrieved from that specific infotype. - Urgent issue.
Thanks........
sk

hi,
what is EECST?
there is no such field in data dictionary.
plz specify properly or atleast u give the name of field in general that is used in pa0167 infotype so that we can help u.

Where does the Purpose field in IT9 gets updated in Employee vendor master.

Hi All,
I have maintained the purpose field with a value in IT9 for an employee.
I have run PRAA program to update the bank details for the employee in employee vendor master.
Can you please let me know where will the purpsoe field in IT 9 gets updated in employee vendor master.
Regards
Vish

Hi Micheal,
Initally Purpose Field is hidden in screen module pool. we have enabled it . so it is available in IT9.
Regards
Vish

What/Where is the Value Lifecycle Manager (VLM)

What/Where is the Value Lifecycle Manager (VLM)
I was just reviewing an ASUG presentation from Soledad Alvarado Ganzhorn of SAP NetWeaver Product Management at SAP Labs. It describes a value lifecycle manager tool that includes:
&#56256;&#56457;Value Discovery content includes: Interview Questions, Pain Points, Best Practices, Solution Enablers, Value Drivers & KPI's, and Data Requests
&#56256;&#56457; A Knowledge Management Platform Retrieve and Enter content
&#56256;&#56457; A Highly Flexible and Customizable Business Case Building and Reporting Platform
&#56256;&#56457; Used by Value Engineers, Solution Engineers, ISG, Partners and others
Is anyone aware if SAP is using this tool already? Will customers get access to it? This sounds like a replacement for the business case builder which I haven't seen either. It would be nice if customers had access to these sorts of discovery tools. Since we don't utilize SAP consulting, we are often not able to access this content as we initiate new initiatives. It would be nice to have access as it seems like we are internally selling their software for them.

The tool is available. It is at the following URL:
https://sapvalueengineering.com/VLM2/client.page
SAP has nominated select Partners that have access to the tool. You can probably check with the SAP partner relationship manager in your organization to see if you have access to this tool.

How to get the value field of the return parameters for an action step in teststand sequence file programatically using c#

                Sequence mySequence = myEngine.NewSequence();
                mySequence.Name = "myAction";
                //Create new step of type Action and set Name
                Step mystep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname, StepTypes.StepType_Action);
                mystep.Name = "GetStringObject";
                //Obtain the code module from the step
                DotNetModule myModule = mystep.Module as DotNetModule;
                //Set properties of the module
                myModule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File, @"C:\Documents and Settings\My Documents\Visual Studio 2005\Projects\HelperClass\HelperClass\bin\Debug\HelperClass.dll");
                myModule.ClassName = "Class1";
                myModule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
                myModule.MemberName = "StringObject";
                mySequence.InsertStep(mystep, 0, StepGroups.StepGroup_Setup);
                mySequence.Locals.NewSubProperty("StringObject", PropertyValueTypes.PropValType_Reference, false, "", 0);
                DotNetParameterDirections reference = mySequence.Locals as DotNetParameterDirections;
                mySequence.Locals.GetPropertyObject("StringObject", 0);
                myModule.ClassReference = "Locals.StringObject";
                myModule.LoadPrototypeFromMetadataToken(385875969, 0);
After this I am not able to proceed.herewith attached documents contain screenshot of teststand file marked red is to be solved. How to define the value field of the return parameters?
Attachments:
HelperClass.cs ‏1 KB
ex1.gif ‏2305 KB

Please see my answer to your question on page two of the following forum thread:
Programmatically generating DotNet Steps in TestStand
Manooch H.
National Instruments

How to Change the Value Field Type of a Value Field

Hi,
How can I change the value field type from Currency to Quantity of a value field? I have tried to do it in KEA6. I can change the value field and its description, but not the value field type from currency to qty. If I change this config, is there any other changes that I need to make so there is no side issue of this change?

Hi Prem,
Once you created value field as quantity or currency, you can not change this nature of value field. Based on this, system creates lots of data and tables. For this reason system will not allow any changes in quantity or currency.
Alternative way is to remove the old value field and create a new value field assign to operating concern and put all your seetings.
Please let me know if you require any clarifications.
Thank you,
Regards,
Santosh
Reward points if helpful.

HT201342 Where is the from field in a Mac mail message?

From an Apple information document:
You can send email from your @icloud.com address by following these instructions:
Begin composing a new email on the device of your choice.
Select the From: field in your message.
Choose your @icloud.com address from the list of addresses.
Compose your message and send it.
On number 2, where is the from field in a Mac mail message?

Is there any way to move the default location of the event editing panel from the upper left corner of the display to somewhere in the middle?
Try to scroll while the editing panel is open

Field name and table name for the value field

hi,
i requred the value field for which the quantity that is not delivered in purchase order, so please tell me which field i have to go for the value field.
thanks and regards.

Hi,
There is no direct field to get the PO Open qty(undelivered Qty).
Take the PO quantity for each Item from EKPO-MENGE.
For each PO Item there will be multiple GR(good's receipts) 's in MSEG table.
So pass EBELN and EBELP for MSEG table and Take all the GR Quantities(ERFMG) field and sum up .(have to take care of the Movement type also, becasue there will be some returns and GI's).
Substract the GR qty from PO qty you will get the UNDELIVERED QTY of A PO.
Regards,
Anji

How do I convert the ASCII character % which is 25h to a hex number. I've tried using the scan value VI but get a zero in the value field.

How do I convert the ASCII character % ,which is 25h, to a hex number 25h. I've tried using the scan value VI but I get a zero in the value field.

You can use String to Byte Array for this.

Where is the value of a SAP UI page Field stores?e.g. Priority

Hi All,
I am so confused about getting the value of a UI page field, e.g.Priority. I don't know how to obtain its value in a report. It isn't a field in CRMD_ORDERADM_H table.
Via set a breakpoint in one of class CL_CRM_UIU_BTADMINH_CN' method GET_PRIORITY and debug, I can find its value here in 'assign ME->CONTAINER_PROXY->DATA_REF->ATTRIBUTE_REF->* to <DATA>.'. But I don't know how to use it in my report.
Any one can help? Thank s very much!
Br,
Ivy

Hi Ivy,
You can find the priority in the table SCPRIOT.
If you want to get it from the UI, you can get it from the relation BTHeaderActivityExt
Refer the code:
DATA: ls_activity_h TYPE crmst_activityh_btil.
    lv_collection = lr_order->get_related_entities( iv_relation_name = 'BTOrderHeader' ).
    IF lv_collection IS BOUND AND lv_collection->size( ) GT 0.
      lr_adminh ?= lv_collection->get_current( ).
    ENDIF.
    CHECK lr_adminh IS BOUND.
*        check if the leading object is activity or task
    CALL METHOD lr_adminh->if_bol_bo_property_access~get_properties
      IMPORTING
        es_attributes = ls_adminh.
    INCLUDE crm_object_types_con.
    IF ls_adminh-object_type EQ gc_object_type-businessactivity OR ls_adminh-object_type EQ gc_object_type-task.
*          get the activity header extension
      CLEAR lv_collection.
      lv_collection = lr_adminh->get_related_entities(
             iv_relation_name = 'BTHeaderActivityExt' ).
      IF lv_collection IS BOUND AND lv_collection->size( ) GT 0.
        lr_activity_h = lv_collection->get_current( ).
        CHECK lr_activity_h IS BOUND.
*            check if the activity or task is marked as private
        CALL METHOD lr_activity_h->get_properties
          IMPORTING
            es_attributes = ls_activity_h.
Regards,
Leon

KE28 Top-down distribution for only part of the Value Field

Hi Experts,
We have a situation where we will make manual postings in CO-PA through KE21N. Part of this postings will be at the lowest detailed level and part will be for a more summarized level od characteristics. All the postings will flow to the same value field.
We need to make a top-down distribution only for the postings that were made in a summarized level, because the other postings already have the details that we need.
Is it possible?
Kind Regards
Mayumi Blak

Hi Venkata,
Please note that :-
you can not distribute to a characteristic that already contains a
value. Please see note 77476. If you want to distribute to eg.
profit center, then the characteristic must be initial (in the data
to be distributed).
In the case where the log showed "number of receivers" but no line
written is a common problem in transaction KE28 logged by customers.
One example is that, if the amount of line items is 0.00 for all the
receivers, no line item will be written.
No values in reference data:
If there are no values in reference data for some segments (see the
log). No records are posted (segments which were distributed, but
their value is zero i.e. there is no value to be distributed, are not
posted).
No initial values in the distribution level (ie. # - non assigned)
in each of the characteristics in distribution level.
Kind Regards,
Abhisek Patnaik,

Where is the value of report repository stored in the database?

Hi all,
One of our developers is trying to write a code that would send the output report (pdf)of a process through mail, typical work flow stuff.But the problem is that we are not supposed to hard code the value of report repositiry from where the report has to be picked.can anybody suggest a table in the database from where the value of report repository can be queried.
we tried using
select reportrepositorypt from pswebprofile.
but this doesnt return the correct path. we went to PIA->peopletools->webprofile ->webprofie configuration
here we updated the value in report repository field and saved it and queried again.
But this didnt solve our problem.
Its showing the previous value which is different from the actual report repository path.
all the servers are in solaris box.
please suggets.
Thanks!

Right now, I am trying to send a PDF (XML Publisher report) as an email to our vendors (it is their ACH Advice).
What I have done so far is: Created an App Engine, one step to populate a state record with run control information and the second step that runs XML Publisher and creates PDF report(s) which are published to the Report Repository and saved to a file on our network. Now I think I just need to create a third step to recall the PDF(s) and send the PDF(s) out as emails to our vendors.
I have found that the PDF information from Report Repository is stored in the Database in the CDM_LIST_VW record (this is a view and the main underlying table is CDM_LIST, but this contains what I need for now, so I'm going to try using it first). The Report ID is stored in the CONTENTID field and the Report Description (description shown on the Report Repository -- which in our case contains the email address) is stored in the CONTENT_DESCR field. So I am going to try over the next week to write the logic to query the CDM_LIST_VW for the data needed for the email address and the ReportID to go and grab the file....The hardest part is finding the actual file but I am hoping that I can also find a URL on that table. I'd pull the file from the network, but XML Publisher writes them out into numbered folders where all the PDFs are named the XML Report Defn - thus same name). I have not tried any of this yet, but am hoping I'm on the right path.
I hope this helped answer your question.
Good Luck!
Jennifer

Why can't I type in the To field to email photos from within iPhoto?

I selected some photos then Share > Email. I can type in the Subject and in the body of the email. I can select the To field but when I type nothing shows up in it. Stumped. I'll email by dragging into Mail, but I'd like to know what's up.

Set up iPhoto to use Mail instead of iPhoto for the mail client in the General preference pane:
If you want a template use one of Mail's many stationary templates:
Try the following to get iPhoto to accept text in the To field of iPhoto's mail window: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Where is the Grouping field saved to?

Hello.....
I need an answer to this because I can't seem to find it anywhere.
When you enter information into the grouping field for any track, where is that information saved to? Is it embedded into the song's file, or is it saved to the iTunes .itl file, or both?
I ask because I'd like to type "5 stars" or whatever in this field, so that way, if anything happens to my .itl file, and I'm unable to recover my song ratings that way, I'll have this as backup. All I'll have to do is select all songs that say "5 stars" in the grouping field, click "get info", and rate them all 5 stars....and I'm good to go. I'm pretty sure that the "Comments" field saves to the .itl file.....so that's of no use obviously.
If anyone has a concrete answer, please let me know. Thanks!

The Music Dude 1987 wrote:
Hello.....
I need an answer to this because I can't seem to find it anywhere.
When you enter information into the grouping field for any track, where is that information saved to? Is it embedded into the song's file, or is it saved to the iTunes .itl file, or both?
I ask because I'd like to type "5 stars" or whatever in this field, so that way, if anything happens to my .itl file, and I'm unable to recover my song ratings that way, I'll have this as backup. All I'll have to do is select all songs that say "5 stars" in the grouping field, click "get info", and rate them all 5 stars....and I'm good to go. I'm pretty sure that the "Comments" field saves to the .itl file.....so that's of no use obviously.
If anyone has a concrete answer, please let me know. Thanks!
I just tried it with an MP3. Grouping and Comments are saved to the file. Rating is not.

Where is the picture field stored in HR master data?

I am developing an organizational chart in BSP from OM in HR module.
I am able to pull out the person name from master data in HR but i can not find the picture field.
Hence my question is, in which table and in which field is the picture stored. If i go to HR master data and do a search for a person i am able to see the picture, so i know it is stored some where but i am not able to find it.
Thanks
Nahman

Thanks for the link. It is very helpful.
But right now i am just doing a prototype, so i am using the persons already in the system. So i dont have to upload any pictures right now. I still could not figure out from the link you provided on how to get the pictur.
I am able to see the desciption using transaction OAAD but i was not able to understand how to get the picture.
Maybe you can explain it to me.
I have awared the points for the post you have posted.
Thanks
Nahman

Where is the value field in antique photos?

Similar Messages

Maybe you are looking for