Where is the "Window Layouts" file?

I exported my 65 GB movie.
I didn't check the location; just assumed it was going to plant the last place I exported a movie to.
I clicked the "export" command again to see where it defaulted to; I can see the movie name, but the finder cannot locate either my movie nor the "Window Layouts" folder it is in, presumably because it's buried in a bundled file somewhere.
RRRRrrrrr
I'm going to have to export the movie again unless somebody can tell me where the *** this file is...
And it was going so well...
Thanks!

Thanks, guys.
I just downloaded and installed a nifty little program called "Find File" which searches inside bundles and packages, too.
http://www.versiontracker.com/dyn/moreinfo/macosx/10906315
Found it, just where you said, Nick!
FCP really shouldn't export movies to a preferences file! That seems a little like a glitch to me...

Similar Messages

In windows 7 where is the iPad backup file located?

In windows 7 where is the iPad backup file located?

iTunes places the backup files in the following places:
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

FCP X freezes "Restoring the window layout"

Hello everybody,
I downloaded Final Cut Pro X, and at startup, the software freezes, showing "Restoring the window layout". I tried all the solutions indicated on the web, nothing works... (deleting preferences, deleting layout, using PreferecencesManger...)
Please help!
My computer is a Macbook Pro 15'' Mac Os 10.6.8
Thank you
Raph

Well, this is one of those situationewhere deleting the preference file would actually be useful, because that is one of the things stored there - but you alreday did that...
Are you still on 10.6? Your profile says so.. although it has to be 10.6.8 then.. as FCPX does not run on previous versions.
Do you by any chance have a Window Manager or extension installed??

Removed layouts folder but still "Restoring the window layout"

MY ORIGINAL PROBLEM
All my Final Cut Pro X files are save on my external hard drive. When I open FCP with my hard drive plugged in, FCP says "Restoring the window layout" and a grey background appears. If I open FCP without my harddrive and then plug my harddrive in once FCP has loaded,FCP works. Please Help!
The problem seemed to be solved by putting the layouts folder on the desktop
But I just loaded up FCP and its the same stupid problem all over again.

The extrernal drive doesn't have FCP installed on it. It only has the FCP projects and events.
It isn't the drive I use for time machine
WD my password connected with USB
Available space: 543.78 GB
Used space: 456,046,366,720 bytes (456.05 GB on disk)

FCP says "Restoring the window layout"

All my Final Cut Pro X files are save on my external hard drive. When I open FCP with my hard drive plugged in, FCP says "Restoring the window layout" and a grey background appears. If I open FCP without my harddrive and then plug my harddrive in once FCP has loaded,FCP works. Please Help!

Have you got loads of projects on your external HDD?
If so it will usually take a long time to launch FCP X.
You need to hide those you are not using with this excellent free app which used to cost $5 and was a bargain at that price.
http://assistedediting.intelligentassistance.com/EventManagerX/
If you are using the latest FCP X 10.1 you need to close any unnecessary Libraries.

I need the Windows .msi file for Shockwave Player 11.6.5.635

Where can I find the Windows .msi file for Shockwave Player 11.6.5.635?

I don't know which version this one is, but it's the latest and you should always install that over previous versions

I backed up my ipod during a windows backup. how do i find those ipod files(not itunes) in the windows backup files? i've tried searching and i can't find

i backed up my ipod during a windows backup. how do i find those ipod files(not itunes) in the windows backup files? i've tried searching and i can't find

so i plugged in my ipod and it asked if i wanted to backup the files before restoring it.
Do you mean iTunes asked if you wanted to backup files before restoring? If so the it is in the location I posted. You don't need to navigate to the backup. Once your restore your iPod it will ask if you want to restore from a backup and present you with the backups made before hand.
To restore information from a backup, use one of the following methods after connecting your iOS device to the computer with which you normally sync:
-Click the File menu and select Devices > Restore from Back up.
Or
-Open the iOS device's Summary tab. There are two ways to access this:
-Click the device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper right corner. The device button will then be visible.)
-From any view in iTunes, click the View menu and select Show Sidebar. Select your iOS device in iTunes under Devices.
-Click the Restore Backup button.

Can I reimage an external hard drive that is in the windows NT file format?

can I reimage an external hard drive that is in the windows NT file format?

With WinClone 3.x $20 for Mac or with Windows imaging - built into Windows.
Some like Acronis didn't (may now) work on Macs. Many use a linux CD recovery boot..
You can write to NTFS with a simple NTFS driver. There, I strongly recommend Paragon for OS X
www.paragon-software.com
They also have all the program and Apple Boot Camp support
Image a system or image a hard drive or.... ?

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

"Restoring the window layout" hang - tried everything! HELP!

I'm in Mavericks and am experiencing that "Restoring the Window Layout" hang that is kinda infamous around these parts.
Except that in my case, I've done EVERYTHING that all the other links suggest. I have:
*Trashed the Layouts folder (inside Users/myusername/Library/App Support/Final Cut Pro)
*Trashed prefs (inside Users/myusername/Library/Preferences)
*Followed the instructions to remove FCPX entirely (as found here: Final Cut Pro X 10.1: How to remove and reinstall Final Cut Pro X) *and* repeated the removal of Layouts and prefs as stated above.
And the problem still persists.
I am [attempting to run] the latest version (10.1.2). Purchased through the App Store so it is verified as the latest.
I can in no way get FCPX to launch properly. Every time I try, it hangs during the launch on the "Restoring the Window Layout" launch screen. I do see my last-used project partially drawn behind it, but the window is all funky (things are in weird places).
Please help...kinda desperate here...

Thank you so much.
I am certain I had trashed all the prefs mentioned in the other threads (there were about 3, in the Users/Prefs folder), but I tried your key command, got the prompt to completely trash all prefs, and it did indeed cure the issue. Thanks a ton!

Restoring the window layout

I have constant freezing when opeing up Final Cut Pro X (10.1) - the message given by the welcome-screen is "Restoring the window layout".
I know this is an "old" problem and I've had it with earlier versions of FCPX as well - but now with 10.1 the problem is constant in the way that it happends almost with every start. The workaround I've found (deleting Library/Application Support/Final Cut/Layouts AND Library/Preferences/com.apple.finalcut.plist, AND then reboot the computer) work fine every time. But - of course this is not ideal in any way.
Is there any one out there who have found a cause to this behavior?!
/Tobbe Rydén
Sweden

What the heck are you guys talking about?!
This issue is coming up again; the issue was previously resolved with 10.0.3.
Followed all steps in KB, followed tips found on reputable FCPX sites, no luck.
We are opening a ticket with Apple, hopefully they'll give us a fix, or they'll acknowledge the regression and will issue a patch ASAP.
Don

"Restoring the window layout", problem

no arranca se queda en "Restoring the window layout", ya eliminé la carpeta Layout, y no funcionó

What the heck are you guys talking about?!
This issue is coming up again; the issue was previously resolved with 10.0.3.
Followed all steps in KB, followed tips found on reputable FCPX sites, no luck.
We are opening a ticket with Apple, hopefully they'll give us a fix, or they'll acknowledge the regression and will issue a patch ASAP.
Don

FCP stalls at Restoring the Window layout

Hey all,
FCP doesn't seem to want to open and stalls constantly on "Restoring the Window Layout"
I've tried Final Cut Pro X: May stop responding at "Restoring the window layout" or open to a gray window - Apple Support but that doesn't help at all.
I've tried reinstalling the whole programme. That doesn't help at all.
in my Force Quit Applications box I'm getting a notification that com.apple.audio.InfoHelper is not responding
Anyone got any ideas? Or do I just put this down to Apple's new definition of what a "professional" application is?
Thanks
Sam

OK
Trashed ~/Library/Application Support/Final Cut Pro/Layouts - quit, restarted, no change
Trashed ~/Library/Preferences/ anything with com.apple.finalcut in the title - restarted and it now works.
Hoping it lasts longer than the first time it "worked"
Thanks for the help
Sam

AA2.0 How do I transfer the Window layout...

The new monster machine has been delivered and I'm working on setting it up;
> Dell Precision Workstation T7400
> XP-64
> Dual Socket, Dual Quad Core Xeon
> 8GB DDR2 RAM
> 120GB SSD C:\
> 320GB D:\ [ WD 7200 ]
> 320GB E:\ [ WD 7200 ]
> 320GB F:\ [ WD 7200 ]
> SB X-Fi Xtreme Music [WDM] Sound Card
(They want to eventually be able to do video work also that's why I had this monster ordered)
I however, don't want to spen the next 6 days setting up AA2.0
is there anyway to transfer the window layout settings from one AA2.0 install to a new one,
the first run layout is way too much junk for what I use it for
I tried searching but nothing of any relevance was presented in the results
all I want is to have it look as close to AA1.0 as possible
which I have already managed to do on my home machine
and the previous (old machine) install here
however, I'm not kidding when I say it takes 6 days to set it up the way I want
just trying to move the level indicator below the main window and above the rest
is nearly impossible it always goes behind or in front of the main window
making a huge useless 1000Px wide x 800Px tall level indicator (screen res 1152x 854)
or it pops behind or in front of one of the other small windows
here's my setup:
Edit View:
1> Regular Tool Bar (not the Hybrid)
2> Main window
3> Transport Controls
4> Time window
5> Zoom Controls
6> Selection / View position indicator
7> Level Indicator
8> I float the Cue list & only open it when I need it.
here's AA1.0 on this machine
The other AA2.0 machines aren't running
I'll post my AA2.0 window layout later (when I fire it up tomorow)
A-Ω

Thanks Craig;
I've been using 2.0 like this since I set it up and I don't use a lot of the "extra features"
working strictly in EV, I like my wave as big as I can have it while still being able to
use the rest of the machine
the work I do has me splitting words to correct:
stuttering
ummm's
repeated words
andahhhh's
etc.
all while making it sound like the speech errors never happened
1152 x 864 on a 17" monitor makes the normal windows text tiny and unreadable
without modification to the default font size and then selecting the Windows (Large) theme
I'm from the old school when a 15" monitor was considered huge and 800 x 600 was the res. to have
here's my screen from home office setup on the exact same monitor res. as the AA1.0 from the office setup
I just want to transfer the settings for this layout because it's what I use
A-Ω

Where is the swing.properties file?

In J2SDK 1.5 beta, where is the swing.properties file.
The file is supposed to be located in <Java Home>/lib/ but it is not there.
Thanks,

I'm not sure about 1.5, but normally there isn't one. The defaults are just used unless there is one.
Look here
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/UIManager.html

Where is the "Window Layouts" file?

Similar Messages

Maybe you are looking for