Where is the window?

when I open compressor (v3 in fcs2) I can't find the window to put my source files. inspector, history, preview and settings/destinations windows is visible, but not the "main" window.
I can't find any place to open/re-open this important window...
any ideas?

The very simple solution provided by the "ingenious" user Jason Toth in this thread ...
http://discussions.apple.com/thread.jspa?threadID=1197900
... solved the problem for me!
I had Compressor Version 3.0.1 installed, had the same problem that compressor didn't show any batch window, and I could not install the upgrade to version 3.0.2 because the installer said that my computer didn't need the upgrade.
I followed Jason's instructions, could then install the upgrade to version 3.0.2 and now the batch window is back and Compressor 3.0.2 is working fine!
Many thanks to Jason Toth!

Similar Messages

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

Where is the window for animation?

I dont know where is the window for animation in Photoshop CS6.
did you guy get rid of this window when you developed Photoshop CS6?
I remember the previous version has this window.
let me know where is it.
Thank you very much.

The Timeline Palette can create both Frame Animation and Video when you have a document open.

Where are the Windows Drivers?

Hi,
When I run Bootcamp 2.0 And try to partition the drive for Vista bootcamps says..."After you have installed and set up windows, insert your Mac OS X Leopard install disc to install additional drivers and other software for windows."
So I went looking on my install discs. I cant figure out where these Windows drivers are. Anyone know?

You can also find the drivers in the boot camp download page. Depending on your flavor of Windows (32bit or 64bit), you'll download different updates for Boot Camp 2.1.
Go here - http://www.apple.com/support/bootcamp/
On the upper right corner of the screen you will see the Software Updates section. Click on the appropriate link to download the file you need. The files that you download are Windows executables and should only be downloaded in Windows. They can also be run directly from the website, but clicking the Run button (instead of Save) after you click the appropriate download link.
Hope that helps!
Christopher Spera
Sr. Editor, Content
WUGNET Publications, Inc.
The Windows User's Group Network
http://www.wugnet.com

Where is the "Window Layouts" file?

I exported my 65 GB movie.
I didn't check the location; just assumed it was going to plant the last place I exported a movie to.
I clicked the "export" command again to see where it defaulted to; I can see the movie name, but the finder cannot locate either my movie nor the "Window Layouts" folder it is in, presumably because it's buried in a bundled file somewhere.
RRRRrrrrr
I'm going to have to export the movie again unless somebody can tell me where the *** this file is...
And it was going so well...
Thanks!

Thanks, guys.
I just downloaded and installed a nifty little program called "Find File" which searches inside bundles and packages, too.
http://www.versiontracker.com/dyn/moreinfo/macosx/10906315
Found it, just where you said, Nick!
FCP really shouldn't export movies to a preferences file! That seems a little like a glitch to me...

Where is the window border stored?

If you open a finder or system prefs window, or even the top of an app like firefox,
you have that ugly gray border where the search bar and window-resize buttons are.
I just want to know where the resource for it is.
I know it should be in disk Library or Core but I don't really know where to find it.
I have 10.8 not that it matters.
If it's just an image resource then I only want to darken it, that's all.
I assume I'll get no help but I just want to try anyway.

Hi,
The header/title bar as you call it will be inside the app package for third party apps like Firefox.
Mine in Firefox is actually themed and not grey.
Similarly Apple Apps will have a NIB item that controls the windowing and title bars.
I would expect as you suggest that these will be in Hard Drive Name/System/Library/Core Services somewhere.
But it is just as likely they are stored in one of the invisible folders
10:04 pm Saturday; February 8, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Where is the Windows 8 Pro 64-bit ISO download?

Normal tech support has yet to answer this problem. I purchased the $39.99 Windows 8 Pro download, and ran the upgrade on my Windows XP Home Edition (which is 32-bit OS, by design) machine. The machine is fully capable of a 64-bit OS (in
fact, I have a dual boot with Ubuntu 12.04 LTS 64-bit running in a separate partition). When I finished the Windows 8 Pro install, it turned out to be the 32-bit version. I discovered via the normal support forum that this is a limitation of the
download installer - it chooses without user option the architecture based upon the older Windows version.
I called support and they first thought that the MS store could provide the 64-bit ISO download. That didn't work - they're researching it, though. I tried support again and this time the rep said the installer chooses the architecture based
on what the machine is capable of running. I respectfully disagreed, but that didn't solve my problem.
So, how can I get the 64-bit ISO download, without having to make an ADDITIONAL purchase of the retail DVD version?
- A frustrated IT professional

I attempted to get this problem resolved and entered the truly bizarre world of Microsoft "Support."
The Windows 8 support line took my information, repeatedly put me on hold and then transferred me to another department. I was again asked for all my information, again put on hold repeatedly and then transferred to a third department.
I ended up with a recording saying my call couldn't be completed and was sent back to the 1st support department.
I spent the next 15 minutes again repeatedly being put on hold and I eventually asked for a supervisor who again wanted all my information. At this point I had been on the phone with Microsoft for over an hour and had gotten nowhere so I asked for
a refund. The supervisor said she would process one asked me to go to a web page and click on a link that did not exist on that web page. She spent the next 15 minutes putting me on hold and then returning to the call only to again insist I click
on the non-existent link.
Eventually she figured out that there was a problem with Microsoft's web page and said I would get a call back within 48 hours. 72 hours later I had received no call.
I again called the Windows 8 support line. After 20 minutes I was told that I was calling the wrong department (I had spent over an hour on the phone with them previously) and given another phone number. I called the 2nd phone number and was
given a 3rd phone number. When I called the 3rd number I was given the 1st number once again.
I had spent over 2 hours on the phone with various Microsoft departments and ended up literally right back where I started. I ended up disputing the charge with my credit card company and contacting the Attorney General.
I can happily say that my experiance was the opposite they were freidly and helpfull told me I would need a refund as the 32 Bit Key Code would not work for a 64 Bit download ? rather odd as it was the same code for both 32 and 64 Bit versions discs when I
installed Win 7, and they gave me a web link that took me to my purchase information and I had to Click on the refund link, the email regarding my rufund was in my inbox by the time I had completeed doing the required steps on the web link, the email also
had a link for this same web siteI had visited as well. simple and painless, very stisfied with the helpline, OK so not being warned about it only going to download a software ISO etc. for the present 32 or 64 Bit operating system was annoying and while
a well meaning idea to ensure a simple upgrade was flawed, but easy to get round.

Where is the Windows Migration Assistant?

Window XP machines does not appear in the Lion Migration Assistant. Do I need to download software to the PC before running the Migration Assistant? Where is the software to download?

Is this what you want: Windows Migration Assistant for Lion?
Also, see Boot Camp - Installation & Setup Guide (OS X Lion)

Where is the Windows 8.1 Key?

Hi, Some months ago, I upgraded my "ThinkCentre E73" to Windows 8.1 using the supplied disks. I now wish to do a clean install of Windows 10 from an ISO file but wonder if I will need the 'key'. If I do, where can I find it? Thanks - Joe

hi Joe,
You can find the Windows 8.1 product key by following this guide.
Take note though that before you can clean install a copy of Windows 10, you will need to upgrade your current Windows 9.1 installation to Windows 10 then activate it (this converts your Win8.1 key to a Windows 10 key and syncs your hardware ID and activation license to the microsoft servers).
Once you have an activated copy of Windows 10, you can clean install will be able to activate Windows 10.
You can read more here:
How to Activate and resolve common Product key issues in Windows 10
Windows 10 FAQs
Regards

Trial Version of elements 13 running on latest IMac 27 inch. Move the mouse and it is time out. Doesn't matter where on the window the mouse is. The program does not respond quickly at all. Takes ages to do anything with it. Any suggestions?

I am running a trial version of Elements 13 on the latest IMac 27 inch. Any move of the mouse and it is time out. Doesn't matter if the mouse is trying to do an edit or just moving across the window. The program does not respond very well at all. I am wondering now if I should bother purchasing the program.

How much ram do you have? Did you recently import a bunch of photos into the organizer? PSE will be slow till it's through cataloguing them, which can take some time for large number of images.

Why is screen blank when click "new tab", where is the window to type in url address

I cannot see the URL address of page I am on if I want to cut/paste and keep it, also I have to keep opening another mozilla firefox over and over as the newtab feature shows a blank page each time. Where is the area to type in URL address? How come I cannot have a series of pages open typing a new address on each page like I used to?

I found my own answer. If this happens, go to "view", "toolbars," and put a check next to "navigation toolbar."

Where's the window information?

I'm running Mountain Lion 10.8.1 on a new Macbook Pro. In my open folder windows, the information bar at the bottom of the window which displays the number of files and available space is longer there. I can't find it anywhere. I've check the View preferences, Finder preferences, System preferences, as well as the Customize Toolbar settings in hopes of finding a means of "turning it on", all with no success. This information may be trivial to some, but is a quick way of visually verifying and comparing files when copying or backing-up large numbers of files. Is there anyway to restore this feature?

One other thing that the Path Bar is good for in case you didn't realize it, the path displayed is 'live'. That is you an grab it and drag it to other windows and the path will be copied into that window. (If you drag it to a Finder window the file/folder is moved)
You can also grab just a piece of it. Say you want the parent of the folder you are looking at, you can grab that icon and when you drop the path only the part up to the parent is copied.
It's especially good for getting paths into the Terminal if you do any work there. Saves a lot of typing.
Comes in very handy once you realize it is there and use it a few times.

Where is the windows 10 reserve button

I cant seem to find the windows 10 reserve button on my acer aspire switch 10 even though i have all the windows updates, even the optional ones Please Help Me!!

have the same problem. the KB updates on mine are not installed. when i triied to install them manually, they say they are "not applicable for this machine".. i contacted Acer support several days ago and they basically told me they were going to push the upgrade out when it got close to the 29th. It's close to the 29th. When I bought my unit from Amazon, it avertised free upgrade to Win10. I hope we get the free upgrade

Where are the windows with the folder pictures ?

I suddenly realized that I'm no longer seeing the window at the top of the bookmarks window with the various folder pictures that changed as you clicked on a book mark within a folder. (I'm not even sure I'm asking this question right?) I recently downloaded OS 10.5.8. I was running 10.5.6. Did I lose something or did something change. Do I need to reset something ?
Thanks.. Carolyn

I havea discovered the name of what I seem to have lost. "Cover Flow". I did a google search and found that your mac has to supoort Quartz Extreme, and mine does. Obviously it did or I wouldn't have had Cover Flow previously. So what happened ?
I'm really trying to figure this out myself, but I think I'm at the end of my knowledge here.
Carolyn

Where is the window that displays midi chord names played on my controller??

I can't seem to locate the pane in the transport window that displays chords/notes played on the midi controller that was present in past versions.
Any ideas, please????

"The display will show chords as played by incoming MIDI data, but Logic has never shown chords from the playback of the sequencer data."
"I used Cubase for years and this was a feature. Surprised it's not one in Logic but it's just a niggle."
That's not good enough for me.
I find this lack of chord display in Logic Pro X to be more than a minor inconvenience. It's a very helpful tool, when say, I'm sitting down with a guitar player to review the structure. A quick look at a chord names as they are sounded can get the guitar player started quickly, on their own. I too used and sometimes still do use good ole Cubase. My version of Cubase is 20 years old :-), yet Logic can't display sequenced chords? Wow. Bummer.
Well, I've heard Logic has it's shortcomings.
Louise

Where is the window?

Similar Messages

Maybe you are looking for