Where is the worksheet description?

Hi,
I created a workbook in Discoverer Plus with a description for the workbook and specific descriptions for the worksheets. When I go in Discoverer viewer and I check the workbooks' list, I see that my workbook has his description but the worksheets in it have a blank instead of the worksheets' descriptions. Is there an option to "turn on" to see thoses worksheets' descriptions in Discoverer Viewer?
Thanks!
Mathieu

Hi Mathieu
I don't believe the scaling from Plus is applied in Viewer. You have to do that yourself in Viewer itself. This is because only the real end user knows what their printer settings should be like.
Viewer has what is called fine grained printing but the print set ups need to be done in Viewer. To control this you use Printable Page in the Options menu on the side of the report then use the Content and Page Setup tabs to control the print layout.
Does this make sense and have you tried it?
Best wishes
Michael

Similar Messages

Where is the vendor description(short text) stored against LIFNR

Hello,
where is the vendor description(short text) stored against LIFNR ..
Thanks..
Shehryar

Hi,
Venodor Name is in the Table LFA1 and field is LFA1-NAME1.
if it is Blank you can take the ADRNR from LFA1 and go to ADRC table with ADRNR and get the Name from ADRC table.
Regards
vijay

Where is the batch description in the new Photo?

Where is the batch editing description and title we used in iPhoto? I did find how to edit description in a single image, but where is the batch? I really need it in my workflow, having to expor lots of photo's on a daily basis to external corporate systems, that sort on descriptions.

There was a post that discussed some ability to automate titles based on filenames:
Where are photo file names?
From that inspiration I wrote this little Applescript that will take all items selected, ask you for a description, and then apply it to all selected:
tell application "Photos"
activate
set imageSel to (get selection)
if imageSel is {} then
error "Please select an image."
else
set theAnswer to text returned of (display dialog "Title:" default answer "")
repeat with im in imageSel
-- set the name of im to theAnswer
set the description of im to theAnswer
end repeat
end if
end tell
you can see from the commented out line that you could do the titles (names) as batches the same way.
I haven't finished it out yet, but wanted to post it here to give you a start. I have tested it on a handful of items, so I know it at least works. You could save this as an app from within applescript editor, and then just run it after making a selection, or you could paste it into an automator action and tie it to the services menu as mentioned in the forum post above.
Photos luckily does seem to have applescript hooks for the following when dealing with a "media item" - looks like you can add/edit most of the metdadata you have access to in the GUI. I initially missed this when I looked, so was very glad to see the forum post that pointed me in the right direction.
Property
Access
Type
Description
altitude
get
real
The GPS altitude in meters.
date
get/set
date
The date of the media item
description
get/set
text
A description of the media item.
favorite
get/set
boolean
Whether the media item has been favorited.
filename
get
text
The name of the file on disk.
height
get
integer
The height of the media item in pixels.
id
get
text
The unique ID of the media item
keywords
get/set
list of text
A list of keywords to associate with a media item
location
get
list of real
The GPS latitude and longitude, in an ordered list of 2 numbers. Latitude in range -90.0 to 90.0, longitude in range -180.0 to 180.0.
name
get/set
text
The name (title) of the media item.
width
get
integer
The width of the media item in pixels.

Where are the shorttexts / descriptions stored for products?

Hello,
the database-table for product is COMM_PRODUCT.
But where are the descriptions of the product with it´s different languages stored?
Do you know the database table or a function module which i could use?
Thanks a lot.
Kind regards
Manfred

Hi,
Use the below code to get the product description in different languages,
Data: ls_prshtext   TYPE comm_prshtext.
CALL FUNCTION 'COM_PRSHTEXT_READ_SINGLE'
    EXPORTING
      i_product_guid = lv_prod_guid
      i_langu             = lv_langu
    IMPORTING
      es_prshtext    = ls_prshtext
    EXCEPTIONS
      not_found      = 1
      OTHERS         = 2.
Regards,
Arun

Where are the episode descriptions ?

I noticed that in all my podcasts, the descriptions suddenly appear as "---". I made sure that the text in the XML is still available.
so what have changed ? Why are the descriptions gone ?
Sample podcast:
http://itunes.apple.com/us/podcast/guy-talk/id501170656
and it's XML:
http://www.latalkradio.com/Podcasts/GuyTalk.xml
Thank you

WOW ! i wasn't aware of that. It must be new.
Is there a way to report this bug or follow it's progress ?
Thanks for you help.

On Flash Gallery, where does the Description wind up?

Lightroom 2.4. Mac OS X 10.4.11
I am using flash web templates which are based on, and similar to, the default flash gallery. The Collection Description is "Web Photo Gallery created by Adobe Lightroom." If I change that text, I see that my template name is no longer selected, indicatiing that this is in fact, a change. as I would suspect.
But where the heck is that text in the web page? I didn't see the default one, and I don't see my changed version.
In my browser, I looked at the source, and I do not see that text as a meta description either.
Where does it wind up? What is the feature for, if it creates neither visible text or meta text?
Dean

On the top left corner of the gallery page you should see an item labelled View. Click on the label to expose a context menu. The last option on the context menu is About these Photos. Clicking on this option should expose the description.

Where do I see the errors descriptions????

First I deploy a Mapping in the Deployment Manager (all its OK) and then I execute it.
The mapping collects data from a table and put it in a flat file.
In the Execution results I see in the Summary:
Completion Status Completed with errors.
Row Activity
Mapping1 Inserted 0, Updated 0, Deleted 0, Merged 0.
Where do I see the errors descriptions????

Claudio,
You can use the runtime audit browser to see the descriptions:
From the program menu, Warehouse Builder:
- invoke Start OWB OC4J instance
- invoke OWB Runtime Audit browser
- connect to your runtime repository, using the access user credentials, and click 'view execution report'
- drill down to the details of the execution
Hope this helps,
Mark.

Hi Is there a table from where I could get the org description?

Is there a table from where I could get the org description, any table other than the
org_organization_definitions table

This sounds like an Oracle Apps question. You should try posting it to that forum. Sorry, don't have the link.

Where is the B1 field that contains the ITEM DESCRIPTION in the ecommerce

Is there a place in B1 where we can put in the ITEM DESCRIPTION?
I lookever all over but I don't think the ITEM description in the ecommerce side exists in B1.
Mike

Mike, I think you might be referring to the Part Name (which is really the description), "PartsMaster.PartName," from Web Tools. If so, the matching field in B1 is Item Name, "OITM.ItemName."

Where is the Unloading Point ABLAD description?

All,
I currently extract the unloading point code via the field ABLAD in table MSEG. The problem is that this returns just a numeric code. I believe there is a table somewhere that has the text description but I'm not aware of the table name. Does anybody have any ideas what it could be?
Any help would be much appreciated.
Regards,
PP

Hi,
I guess we dont create any unloading points and assign it to plant and SL and use it during GR.
We enter Unloading point in MIGO in where tab is just the description of place Specifying the point at which the material is to be unloaded (for example, ramp 1).
If u can check thr is no help option available for that field in MIGO, so whatever u enter thr u will get it in ABLAD in MSEG

Where is the focus after executing a statement in worksheet ? (804)

After executing a statement in the sqlworksheet by hitting the 'execute statement' button, 'execute script' button or ctrl-enter the focus is no longer in the worksheet, forcing us to point/click the mouse to the edit area each time.
Using pre-release 2.
Can this be fixed ?
regards,
Ronald.

This loss of focus had been an issue but we did fix this in v804. Did you do a clean install? If so, what os are you installed on? I just double checked on my Windows XP box and my focus was fine.
-- Sharon

How to get Worksheet Description from SQL

Hi,
Can any one help me out. How to get Workbook and Worksheet Description from SQL. I have entered these descriptions from Discoverer Plus.
Thanks in advance.

check this !!!! at least it a starting point
Thread: Where in the EUL schema can I find metadata on worksheets
I followed this steps:
Use the following steps to get the Trigger Working:
1. Login as EUL owner EUL10
Create a test table
CREATE TABLE eul10.TRIG_TAB
ACC_DATE DATE,
sso_name varchar2(100)
2. Create a function under the eul schema owner: eul_trigger$post_login
Do not pass any argument to the function.
Return a number from function.
CREATE OR REPLACE FUNCTION EUL10.EUL_TRIGGER$POST_LOGIN
RETURN NUMBER AS
BEGIN
insert into EUL10.TRIG_TAB(acc_date) values(sysdate);
commit;
RETURN 0;
END;
3. Login with Discoverer Administrator to EUL=EUL10.
4. Check the Menu > Tools > Default EUL.
Make sure this is set to EUL10
If not then change the EUL10 and restart Discoverer Administrator.
5. Now Register the trigger in Discoverer Administrator
Menu >Tools > Register PL/SQL Function ...
6. Click import
7. Select the trigger EUL10.eul_trigger$post_login
|8. Make sure the display name is eul_trigger$post_login (MUST BE lowercase or it will not work)
Function name must be in uppercase: EUL_TRIGGER$POST_LOGIN
9. Make sure the the return type is number and that no arguments get passed.
10. Validate the Function by clicking on the Validate button.
11. Click ok
12. Connect with Discoverer desktop as EUL owner.
13. We see entries in the table trig_tab with the current date.
...... metalink note : 372067.1 Subject: How To Get the EUL_TRIGGER$POST_LOGIN Trigger to Work

How do I figure where is the data in a materialized view coming from

Hi: when I run select NAME, OWNER from dba_mview_refresh_times, I see a number of materialized views. How do I find more details about this view i.e where is the data coming from and which fields. The source table that is in another database changed. But the view on my database where the materialized view exist has not changed. I want to confirm from where is data coming in this view
TIA
Ravi

SQL> select * from dict where table_name like 'ALL%MVIEW%'
TABLE_NAME                     COMMENTS
ALL_BASE_TABLE_MVIEWS          All materialized views with log(s) in the database that the user can s
                               ee
ALL_MVIEWS                     All materialized views in the database
ALL_MVIEW_AGGREGATES           Description of the materialized view aggregates accessible to the user
ALL_MVIEW_ANALYSIS             Description of the materialized views accessible to the user
ALL_MVIEW_COMMENTS             Comments on materialized views accessible to the user
ALL_MVIEW_DETAIL_PARTITION     Freshness information of all PCT materialized views in the database
ALL_MVIEW_DETAIL_RELATIONS     Description of the materialized view detail tables accessible to the u
                               ser
ALL_MVIEW_DETAIL_SUBPARTITION Freshness information of all PCT materialized views in the database
ALL_MVIEW_JOINS                Description of a join between two columns in the
                               WHERE clause of a materialized view accessible to the user
ALL_MVIEW_KEYS                 Description of the columns that appear in the GROUP BY
                               list of a materialized view accessible to the user
ALL_MVIEW_LOGS                 All materialized view logs in the database that the user can see
ALL_MVIEW_REFRESH_TIMES        Materialized views and their last refresh times for each master table
                                that the user can look at
ALL_REGISTERED_MVIEWS          Remote materialized views of local tables that the user can see
13 rows selected.

Error in the language of the taxes description (form)

Hi
Could anyone guide if for teh below aspect.
If there is an issue with respect to "Error in the language of the taxes description (form)"
where do you think the possible error would be . Please kindly guide be.
Thanks & Regards
Sujatha

Hi,
What's the error message number and when do you get it?
Regards,
Eli

Where is the value of report repository stored in the database?

Hi all,
One of our developers is trying to write a code that would send the output report (pdf)of a process through mail, typical work flow stuff.But the problem is that we are not supposed to hard code the value of report repositiry from where the report has to be picked.can anybody suggest a table in the database from where the value of report repository can be queried.
we tried using
select reportrepositorypt from pswebprofile.
but this doesnt return the correct path. we went to PIA->peopletools->webprofile ->webprofie configuration
here we updated the value in report repository field and saved it and queried again.
But this didnt solve our problem.
Its showing the previous value which is different from the actual report repository path.
all the servers are in solaris box.
please suggets.
Thanks!

Right now, I am trying to send a PDF (XML Publisher report) as an email to our vendors (it is their ACH Advice).
What I have done so far is: Created an App Engine, one step to populate a state record with run control information and the second step that runs XML Publisher and creates PDF report(s) which are published to the Report Repository and saved to a file on our network. Now I think I just need to create a third step to recall the PDF(s) and send the PDF(s) out as emails to our vendors.
I have found that the PDF information from Report Repository is stored in the Database in the CDM_LIST_VW record (this is a view and the main underlying table is CDM_LIST, but this contains what I need for now, so I'm going to try using it first). The Report ID is stored in the CONTENTID field and the Report Description (description shown on the Report Repository -- which in our case contains the email address) is stored in the CONTENT_DESCR field. So I am going to try over the next week to write the logic to query the CDM_LIST_VW for the data needed for the email address and the ReportID to go and grab the file....The hardest part is finding the actual file but I am hoping that I can also find a URL on that table. I'd pull the file from the network, but XML Publisher writes them out into numbered folders where all the PDFs are named the XML Report Defn - thus same name). I have not tried any of this yet, but am hoping I'm on the right path.
I hope this helped answer your question.
Good Luck!
Jennifer

Where is the worksheet description?

Similar Messages

Maybe you are looking for