Where is there a list of definitions on error codes?

I keep getting error -1309 when trying to export HD(720). I can't find a listing of error codes on any Apple sites. Where are these posted?

Are you trying to 'export' a large file to an external drive formatted for Windows (FAT32 etc) by any chance? Some are getting that error code if the file is over 4GB.
Here is one list:
http://uktsupport.co.uk/apple/faq/macerror.htm
Here's another:
http://support.apple.com/kb/HT2088

Similar Messages

Where can I get a list of Labview fieldpoint error codes?

I'm programming my application and want to act on some error codes such as failure to communicate but ignore others like some values out of range.

Assuming that you did a default installation, you can click Start-->Programs-->National Instruments-->FieldPoint 3.0-->FieldPoint Help. There is a category called Errors and Warning Codes. Under that category is two subcategories; FieldPoint Specific Error Codes and General Error codes. These two sub-categories should list most error codes that you will see.
Regards,
Aaron

Lists of client install error codes

SCCM2012, Primary site, trying to push out clients.
Anyone know where a complete list of "Last Installation Error" exists? I've come across the ones below, but I'm having many others that I cannot determine what the installation error refers to. Just 2 of them I cannot get solid information are 1305,
1789.
2 – The system cannot find the file specified.
5 – Access denied.
52 – You were not connected because a duplicate name exists on the network. Make sure there is not a duplicate name in DNS and that 2 machines don’t have the same IP in DNS.
53 – Unable to locate – http://support.microsoft.com/kb/920852 – cannot connect to admin$ – Computer Browser not started – add File/print sharing to Exceptions in Firewall – turn file and print on.
58 – The specified server cannot perform The requested operation
64 – The specified network name is no longer available. Source: Windows
67 – network name cannot be found.
86 – network password is not correct? Machine Name <> resolved name.
112 – Not enough disk space
1003 – Cannot complete this function.
1053 – The service did not respond to the start or control request in a timely fashion.
1068 – The dependency service or group failed to start
1130 – Not enough server storage is available to process this command. Source: Windows
1203 – The network path was either typed incorrectly, does not exist, or the network provider is not currently available. Please try retyping the path or contact your network administrator.
1208 – An extended error has occurred. Source: Windows
1396 – Logon Failure: The target account name is incorrect. (NBTSTAT -a reverse lookup, duplicate IP address)
1450 – Insufficient system resources exist to complete the requested service. Source: Windows
2147749889 – Generic WMI failure (Broken WMI)
2147749890 – not found – Source: Windows Management (WMI) – try repair WMI
2147749904 – Invalid class – Source: Windows Management (WMI)
2147749908 – Initialization failure – Source: Windows Management (WMI)
2147942405 – Access is Denied (Firewall rule? / MacAfee-HIPS?)
2147944122 – The RPC server is unavailable. (Dcom is miss-configured for security . http://support.microsoft.com/kb/899965 )
2148007941 – Server Execution Failed
Charlie Hawkins

Here's a blog post I did a while back on finding the meaning of standard error codes:
http://blog.configmgrftw.com/?p=42 .
Here's a also a supplementary KB:
http://support.microsoft.com/kb/944375 .
And, there are custom error codes in ConfigMgr (like 0x80004005, which is *not* Access Denied):
http://technet.microsoft.com/en-us/library/bb632794.aspx (this is for 2007, can't find an equivalent for 2012 but I'm sure it's still applicable).
Jason | http://blog.configmgrftw.com | Twitter @JasonSandys

List of all HTTP error codes returned by EWS

Hi everybody,
I need all the HTTP error codes returned by Exchange when we use Exchange Web Services.
Thanks & regards,
Talib Hussain

We don't have a document that lists every possible error. EWS runs through IIS on the CAS server, so theoretically you could receive any HTTP error that IIS can return.

Where is there a list of supported scanners for Snow Leopars?

Since getting our new imac 27" we can no longer scan with our all-in-one from HP, nor use the old flatbed or slide scanners we had so we're shopping and need a list of what is compatible. Please. We use a WIRED network.

I don't know if someone has compiled such a list, however, I would check at each manufacturers web site and check their latest scanners and software. I got rid of an excellent (but old) HP ScanJet 4570c due to incompatibility and just purchase an Epson Perfection V600.

Um where is there a list of Advanced Devices?

Every link I've found is dead...

Basically, anything with an android, iOS, BB or Windows user interface would be considered an advanced device.

Hi there can you help with this error code Oxc5d1281

I refilled the HP cartridges in my Photosmart C 7250 All-in-One and put them in and got this error. I have D/C power,etc and it still comes up with this error code. Now what?
Cheers,
British_eh

Hi british_eh
You could try resetting the printer, details here
Note though that the reliability of refills tends not be as good as originals, links below FYI.....
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00853819&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
http://www.qualitylogic.com/2009HPinktest.pdf
Kind Regards, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Error Code Definition for JDBC Thin driver

Would like to know where I can find the definition of error codes
for JDBC thin driver to Oracle 7 database. Right now, when I have
database errors, I get SQL execption with CODE=XXXXXX. Need to
know the definition of the error codes in order to decide whether
the application shall retry or quit or do something else. Thank
you in advance.
null

Hi,
thin client session Language is controlled by java Locale.
Based on testing code, ORA- messages are localized after the connection is successfully established. ORA- messages returned in the middle of connecting are in instance language.
So, as far as I can say, you need to catch exceptions from DriverManager.getConnection(url, info); and translate them on your own.
Once the connection is successfully returned, ORA- message language is defined by java Locale.
Tests were performed on Oracle 10gR2 (both thin driver and DB).

Applet returns unspecified Error code 6A 95, List of default error codes?

Hello everyone,
I have very strange problem. I have loaded and installed my own applet in my java card. Everything works perfect, but in one function I obtain not OK response but 6A95. I have specified my own error code but 6A 95 is not in this list.
What error 6A 95 means?
Exist some list of all default error codes? If yes, where can be viewed?
I was looking also to GPcardSpec document and I don't found the error code 6A 95.
Please help me, in this strange situation.
Thank you!
regards,
Milanatik

For anyone looking, the GlobalPlatform card spec has a list of error codes in the section on command APDU's
- Shane

Complete Error Code List? CS6

I am looking for a complete list of Adobe Photoshop error codes/messages for the current version CS6. Any insight is valuable! If there is such a list, or a possible way of creating such, please let me know.

For info, you had some answers on the Feedback site: http://feedback.photoshop.com/photoshop_family/topics/where_can_i_access_a_list_of_possibl e_photoshop_cs6_errors_or_is_there_an_algorithm_for_discovering_them

List of ORA-* error codes

Hey,
Anyonde knows where can i find a list of all ORA-* error codes?
tks

Hey,
I work with an application, developed on a technology called 'NS-DK' (don't bother to google it, is very hard to find out anything about it ...)
Every time the database returns an error, the aplication immediately shuts de database local connection, and uses the NS-DK libraryes to decode the message.
However, after a upgrade to a more recent version of NS-DK, the Oracle errors are not being decoded correctly, and NS-DK support are not being very helpfull in solving the issue, so we are trying to develop a simple patch to temporarily solve the problem.
Reconnect to database to decode the errors is out of question, since it implicates lots of 'codding hours'.
Call Windows executables is not possible too, since the application runs over a 'pillow', without privileges to execute anything.
That's why i need the file. :)
tks

FieldPoint error codes list missing

Hi everybody,
   Here
       http://zone.ni.com/reference/en-XX/help/371361A-01/lverror/error_code_ranges/
   you can find a list of LabVIEW error codes; in the list, the FieldPoint error code section is missing.
   Opening Extended Optomux VIs, opening SerialHandler (VISA).vi, I reached a point containing error codes, which ranges from 32896 to 33026 (or something like that......).
   On Field Point Programmer reference, optomux errors goes from 00 to 8C.
   What am I getting in "error code" field of error out
terminal of extended optomux VIs? Is there a list with complete
errors?
   More: what is the link between Status word (the one
obtained from "Write discrete with status") and error codes? Is it
simply "1" when some error is detected?
   It's quite important to have a deep knowledge of errors when you build an embedded critical application.....
   Thank you for helping me!
graziano.

Hi AlessioD,
    If you expand all the sub-VIs, starting from, say, (!J)Read Discrete (VISA).vi, that is an optomux VI, you'll reach Serial Handler (VISA).vi. There you find the error generation. The numbers assigned to errors seems not to be like constants defined in FP-1000 Programmer Reference Manual.
   In FP-1000 Programmer Reference Manual, for example, E_PUCLR_EXP error (power up clear expected error) has an Error Number (Hex) 00 (page 2-2).
   In the picture below, it seems that a Power up clear error has an error 32896 (resembles much a VISA error code...).
    Is there an utility to get Optomux error codes from General errors? I mean, errors reported from optomux VIs.
   Thanks!
graziano
Attachments:
forum_0.JPG ‏132 KB
optomux VI_1.JPG ‏7 KB

Unknown error code 13014 on iTunes 8.0.2-genius play list function is dead

After I upgraded my PC, I copied old libraries and music files from the old hard drive to the new one. I installed the newest version of iTunes (8.0.2) and when I plugged in my ipod, I saw something I had never seen. Guess what it is?
'Unknown error code 13014!'
I had no problems for using every function that my iPod touch and iTunes have (including Genius play list) and of course, I've been updating every version of firmwares and iTunes programs. After I googled about this incident, I figured out this problem should not be seen on the newest version of iTunes but I'm still suffering from it.
Temporally, I turned off Genius Play List and now, that error code doesn't pop up but of course, I can not use Genius Play list because of it.
I *uninstalled and reinstalled iTunes*, *restored firmware*, *moved Library Extras & Genius.itdb* and *do them again and again*. Of course, *none of them worked*.
What shall I do? Is there anyone else who is experiencing same thing to me? How can I get my Genius Play List function back?
Please Help me. I'm desperate. :<
Any help would be really appreciated.

We have the same problem! i just purchased an ipod touch and that same error kept popping up. so i searched, and disabled the Genius, and now i can't use it. im really mad. and sad.
im thinking about going to the apple store to fix this problem.. but i dont know if theyll help me.. plus, do i have to bring my laptop with me to the apple store? OMG. apple is so frustrating!!! i feel your pain !!!!!!

Where is there a comprehensive list of Icons and what they stand for, represent, and/or mean

Where is there a comprehensive list of icons that shows what each stands for, represents, or means?
Specifically the small box near the pointing mouse or hand.

That small box is probably the tooltips box discussed in the following thread. See if '''cor-el''''s solution works for you as it did for the original poster in that thread.
https://support.mozilla.com/en-US/forum/1/544389?

Around the web where are there lists of mac magazines?...

Around the web where are there lists of mac magazines?... besides macworld and macaddict.

http://www.macmagazines.co.uk/
http://www.magazine-group.co.uk/magazine/computers-technology/apple-mac
http://www.icreatemagazine.com/
Try google. Unless you live in China .There is much more on the web.

Where is there a list of definitions on error codes?

Similar Messages

Maybe you are looking for