Where is this located

Hi,
I'm using an Actiontec MI424WR rev 1 and I'm trying to find a page where I can set the number of users/connections on my network. Do you know where this is located?
Thank you!
Solved!
Go to Solution.

i do not  KNOW for sure, but is it possible that the number of users or devices allowed would be set by changing the range of local addresses assigned ? for example, by only allowing addresses numbered from 192.168.1.1 through 192.168.1.10, you would effectively be limiting total devices to 10, including the actiontec itself... maybe? i remember verizon's westell dsl modem had a setting like this for same reason.....good luck! anyone else with more specialized knowledge care to chime in??
ÔƹÔ

Similar Messages

  • Received message that my start up disk is almost full. Where is this located and how do I know what I can delete?

    Received a message that my start up disk is almost full. Where do I locate my start up disk / files and how do I know what i can delete from this folder to make more space?

    Start up disk is the main, and only, internal disk of your computer.
    I hope you know what you saved on it, so you also know what can be removed

  • ".java.policy" file where is this located

    Hi,
    Where is the .java.policy file located. Do I have to create it? Do I have to use any editor for this? Please help me.
    Thank you,
    Regards
    Uma

    It'll probably be in the lib/security directory of your JRE.
    If you've got a JDK then it'll be something like jdk1.3/jre/lib/security/java.policy

  • Where is ES2 Located?

    Hello!
    I recently purchased Logic Pro 9 and saw videos on youtube of a synth called ES2. Where is this located in Logic pro 9?

    http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=0
    In the Inspector, click the I/O slot of a Software Instrument Track.

  • I'm getting this warning,but i dont know where is it located.please let me know,where should i rectify this? WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!Enab

    i'm getting this warning,but i dont know where is it located.please let me know,where should i rectify this?
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

    Hello,
    This seems not related to SQL Server but more related to Fusion or a missing DLL. The following resources may help you:
    http://blog.mediawhole.com/2010/08/enable-fusion-assembly-binding-logging.html
    http://jamesecampbell.blogspot.com/2011/11/how-to-enable-assembly-binding-logging.html
    http://www.codeproject.com/Tips/141281/WRN-Asssembly-binding-logging-is-turned-OFF
    http://stackoverflow.com/questions/5986930/assembly-binding-logging-is-turned-off
    Please verify if a missing DLL is specified before the "WRN: Assembly binding logging is turned OFF" message.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • FCP X version 10.1.1.  When Sharing to DVD I get the following alert " There was an error burning your discd.  Not enough Disk Space in Target Folder"  I have 700GB   free.  Where is this target folder located?  how can I fix this problem? not space prob

    Sharing to DVD I get the following alert " There was an error burning your disc.  Not enough Disk Space in Target Folder"  I have 700GB   free.  Where is this target folder located?  How can I fix this problem? This is definitely not a space problem. 
    Since starting with FCP X, there has been tons of issues, now that the product actually works with the exception above, makes it impossible to share the production.  Has Apple fixed this problem.  is there a knowledge base article on this?
    On another note, One reason I have not purchased support on FCP X is because you sold a product that never worked for almost an entire year or more.   Now I can finally finish my project,  I cannot share it.....Really.  This has to be fixed now, I am loosing money as I typed this.
    Regards,
    Rob Harris

    Just curious, why would repairing permissions, rebooting ( rebooted 2 times already today) or creating a new user possibly fix this.
    I cannot create a new user, that is way too much work.  I will repair permissions again,  I repaired permissions just a few days ago. Then I will reboot, login and turn off App Nap and rerun the Share DVD.
    There must be something seriously wrong with the OS if your are suggesting creating another user.   WOW!
    Rob H.

  • When curser is on hyper link the url will diplay on the bottom of the screen in the background.(where done is located when site is loaded) How do you control this function?

    When curser is on hyper link the URL will display on the bottom of the screen in the background.(where done is located when site is loaded) How do you control this function?

    Do you want to control that via code on a web page to prevent visitors from seeing the link or do you ask as a Firefox user?<br />
    Tools > Options > Content : JavaScript > Advanced > Allow Scripts to:
    [ ] "Hide the status bar"
    [ ] "Change the status bar text"
    The Status Bar will be gone in Firefox 4.0 and is replaced by the (View > Toolbars) Add-on bar that extensions can use.

  • My husband's phone keeps getting a notice MDN changed--enter pin #.  Where do I locate this #??

    My husband's phone keeps getting a notice "MDN changed" for backup assistant and asks for a pin # to fix same.  Where do I locate this pin #??  We are older and not of the computer generation--appreciate help from younger and wiser folks!

    Have you tried clearing the pin from phone by going to
    Settings
    Apps
    All
    Sync Services and clear data and cache
    After doing this you should be prompted to re enter info when Back Up Assistant app is opened again.
    this information came from the XDA Developers Forum.
    Good Luck

  • Error: "We're having a problem opening this location on file explorer. Add this website to your trusted sites list and try again"

    Hello,
    When i try to open document library from SharePoint Production portal then it throws the specified error. However, when i open document library from SharePoint Development portal then it opens it in file explorer quite easily.
    Production portal is on https whereas development portal is on http. Also, UAG has been configured on production portal.
    Any idea where it's getting stuck up? Surely, this is not a browser issue on Windows 7 as it's opening the development portal's document library on the same machine.
    I've also done following things:
    - Configured Desktop Experience on production environment
    - Installed the hotfix for Windows 7
    Regards,
    Sohaib
    Sohaib Khan

    Hello Sohaib.
    Here is the list of causes defined here.Hope it helps you
    The cause and the resolution methods are the following:
    Cause: There is a missing Root site collection...
    Resolution: Check and ensure,  that the “Managed Paths” are not changed in the web Application’s page, there is a (root) explicit for
    this web application and there is a working Root site collection.
    If for any reason this is not the case in your environment, you may try the following:
    - Apply (if not already) the following Hotfix to one of those clients:
    Error when you open a SharePoint Document Library in Windows Explorer or map a network drive to the library after you install Internet Explorer 10 in Windows 7 or Windows Server 2008 R2 
    http://support.microsoft.com/kb/2846960
    Then, try to delete the cache of the IE browser before reproducing the issue. Check the result..
    - Try to temporarily disable the Antivirus and test again.
    - Check if you have installed the Desktop Experience feature on the SPS13 server.
    - Check if you face this behavior with all users, Or only with some specific ones, Or with all different client OSes.. 
    Otherwise you will need to collect the logs to further analyze...
    http://blogs.msdn.com/b/george_bethanis/archive/2013/11/04/sps13-quot-open-with-explorer-quot-random-error-quot-we-re-having-a-problem-opening-this-location-in-file-explorer-add-this-web-site-to-your-trusted-sites-list-and-try-again-quot.aspx
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • THE Bridge CC Extensions, so where is this folder to be found on a Windows 7 64?

    Maybe I'm the ******* but each time lately it is something else, something new with CC, things are taken out put in another place, things are completely taken out, later added again by special downloads and you have to go and search for the right files to copy and paste files and so on and on and on.... I already lost several hours by each time researching the needed info, files,patches before I actually can do something!
    Now I needed to make for school  an assignment, a contact-sheet that we needed to export import Bridge-Photoshop to create a video-wall. In school we're on the CS6 where contactsheets and PDF, creating in Bridge no problem, now at home running on the CC i'm kinda fu...d, after some research i find following message,
    for now I'm afraid you have to keep your Bridge CS6 on your computer and use it for generating contact sheets (on my Mac I have to close Bridge CC before I can use Bridge CS6).
    - bad news: The Bridge CC online help says that in the current version the Adobe Output Module isn't available anymore and so it doesn't support generating contact sheets: "The functionality to create contact sheets, PDFs, and web galleries is available in Adobe Photoshop and Adobe Lightroom, which are included in your Creative Cloud subscription." Generating contact sheets from within Photoshop is a mess. It's not as comfortable like in Bridge CS5/6, results are not predictable and the time it takes is not acceptable. Using a still fast Mac Pro with 2 x 3 GB quad cores took more than one and a half hour to create contact sheets out of o folder with 140 files – Bridge did that in minutes. Let's hope for Adobe developers working on Bridge CC to make things easy!
    After doin some further research i find this:
    Install the Adobe Output Module
    When Bridge CC shipped, it didn't include the Adobe Output Module, which allows you to create PDF presentations and web galleries. Adobe Output Module is now available for Bridge CC.
    Make sure that you have the most recent version of Bridge CC installed. To check for updates, choose Help > Updates in Bridge. Follow the instructions to install any updates.
    Download the appropriate file below by right-clicking (Windows) or Ctrl+clicking (Mac OS) and choosing to save the file. Save the file in a location you can remember, such as your Desktop.
    So far no problem, following the instructions hoping my problem was solved,
    Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location:
    Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions
    What do you think? Of course everything to be found in my file paths except of course the file i needed, THE Bridge CC Extensions, so where is this folder to be found on a Windows 7 64?
    Added to make things clear a print screen of C:drive path....
    So any idea how to resolve this problem would be very much appreciated. Cheers

    Hi Ronald,
    Sorry for the kinda late reply, busy days these days, lol but indeed somewhere i went wrong in the path. Went in search for the one you gave, progs-COMMON-Adobe and indeed correct. Thanks for the reply as the helping hand, cheers.

  • Where are files located

    I recently had to wipe my hard drive and now I'm in the process of reinstalling all my software and what not. Before doing this I backed up my whole drive using Norton Ghost and saved it to a second hard drive along with all of my music files. However I would like to know what files in itunes contain my library and playslists, and where they are located. Can anybody help me?

    hiya!
    this resource might be helpful:
    What are the iTunes Library files?
    love, b

  • Just got a used airport base station. Set it up and getting wif signal. when I try to hook up on a computer it asks for a security key. where can I locate key?

    just got a used airport base station. Set it up and getting wif signal. when I try to hook up on a computer it asks for a security key. where can I locate key?

    If you mean the hexidecimal equivalent of the alphanumeric password, then you can find this via the AirPort Utility, as follows:
    AirPort Utility > Select the AirPort > Manual Setup
    On the AirPort Utility's menubar select Base Station > Equivalent Network Password

  • In iPhoto '11 where are movies located?

    In iPhoto '11 where are movies located?  When we download photos & movies, they aren't apparent in the "Lst 12 months" & "Library" areas.  They show up as spearate groupings in the "Last Import" but not in the History.  Thanks.

    Movies are stored in Events, like photos.
    they show up as spearate groupings in the "Last Import"
    Select a movie in Last Import and Right-Click on it. Choose 'Show Event' from the menu. This will bring you to the Event containing the movie.
    If the photo or movie is in Last Import, then it is in the Library somewhere,  just not where you expect it to be. Usual causes: the date on your camera is wrong, and so the date on the photo is wrong, or the sorting of the Events has changed (View Menu -> Sort Events)
    Regards
    TD

  • Where can I locate a driver?

    Where can I locate the driver and how do I install a driver for the HP color laser Jet CM2320fxi MFP?

    Download and install the latest software for your printer from the "Support & Drivers" link at the top of this page.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • "no type with this name could be found at this location" error..

    Though my project has been successfully compiled.
    But when I open some specific class, it always comes out some error, says "ERROR: no type with this name could be found at this location". I am not quite clear, because the class underlined is absolutely in the project source folder. :(
    Can anybody tell me what wrong with it?:(

    Hi Tom
    There is a known limitation with Workshop where you would see those errors when the java classes (the types that error out) are part of you webproject itself.
    The classes get compiled and get moved into web-inf\classes folder and somehow IDE does not get to see this in its classpath.
    The workaround is to move those classes into a java project which will get compiled into a jar file that will be part of libraries (goes into APP-INF\lib).
    You should not see those errors after the workaround.
    This is a known limitation addressed via CR277571
    Thanks
    Vimala

Maybe you are looking for