Where is "Use F1-F12 for custom actions?"

Just upgraded to Tiger (10.4.8). In the Keyboard & Mouse pref panes there is no longer an option to "Use F1-F12 keys for custom actions" checkbox, yet reading the posts in this forum many people do have the checkbox. My Keyboard pref pane has "Key repeat rate", "Delay until repeat", "Type here to test settings", and "Modifier keys..." Panther had the "Use F1-F12" checkbox underneath these.

In Tiger, the checkbox is "Use the F1-F12 keys to control software features".
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1944.html
If you are using a PowerBook (or any other portable Macs) but you don't have this checkbox, then I think something is wrong in your System.
PowerMac G4, PowerBook G4 Mac OS X (10.4.8)

Similar Messages

How to use F-04 for customer invoice payment

Hi All,
we post cutomer invoice in FB70 & then use F-28 for customer payment. Could you please advice if I can use F-04 instead of F-28 for customer payment.
Regards
Deepak

Dear Deepak,
there is no difference between the two transaction F-04 and F-28, if You use the F-04 with Incoming payment flag switched on.
The F-04 like FB05 are the generic classic trancations that can be used for incoming, outgoing, credit memo and clearing at once: changing the flag You can do different posting without running different transction as F-53, F-28 and so on.
Thanks.
Mauri

Using single repository for Customer and Vendor

Hi All
Has anyone worked in scenario where a single repository was used to store both Customer and Vendor records? The source and Target systems are SAP ECC and MDM will have both Basic as well as contextual data.
I would like to know the likely challenges. Anyone who has worked on similar grounds can please share his viewpoints.
thanks
Ravi

Hi Ravi,
As you want to manage both Cutomer and Vendor data in MDM you need to consider the following points:
- If you are seeing the Customer and Vendor master as a combiantion satisfying some common criteria,then you can go about using the SAP delieverd Business partner rep which is designed keeping the ECC customer and Vendor details to an extent.You can unarchieve the BP rep in MDM and have a look at its data modelling if it serves your purpose.
- As of MDM 5.5 we do not have provision of holding two master records in a single rep as we can use only 1 main table.So if you want to fit in your customer and vendor masters in one rep you will have to accomodate the combined fields under a single rep with proper data modelling.
- You need to store your two masters in two separate rep and perform data modelling in such a way that your one rep hold those common fields which you wish to use for finding duplicates as mentioned in your above req and then store this information with the complete rest in a dfferent rep.So its a 2 rep concept as possible with teh current MDM version.
- I am not very sure of this method but i think we have a provision of calling and linking data from two rep and display them as one to work upon them through EP.
Hope It Helped
Thanks & Regards
Simona Pinto

Do not use tpc 2106T for custom animation Purpose

I was trying to use TPC2106T for developing a MMI for an application.To my surprise the Labview in built functions for creating custom animations (eg ring control) does not work for TPC2106T .I had been told this is to do with Windows CE OS (which is installed in TPC)
So please be careful if you want to use TPC2106T for custom made animation as you might suffer like me.I am using labview 8
Request information if some body tried the same exercise.

David_Powers wrote:
John Waller wrote:
I thought PM-ing was one of the "benefits" of web forums?
In theory, it can be.
Currently, no one has moderation rights, but they are in the pipeline. A moderator will be able to send a private message to an individual explaining why a post or a thread has been deleted, or warning of impending action if that person's behaviour is felt to be disruptive.
Anyone feeling Waller is a wally or a jolly good fellow will be able to share that information privately.
Also, someone wishing to commission private (paid) help can do so via a private message. It's up to the individual approached to decide whether to accept such a commission. But I think most of the volunteers who provide help here wish to do so in an open and free manner.
Well, I don't mind helping people here, obviously, but I don't turn down work, either! 8)
And I certainly feel that Waller is a wall-er. Does that count?

Setter method for custom action attributes

Hello,
I'm using Sun App server. The container is saying I need to implement a setter method for a custom action attribute? I defined a set<variable() and this didn't fix the problem. What kind of setter method is it expecting?

nevermind, found solution

How to use Resever Field for Customer Master

Hi
My Client Requirement. Price should be determine with Sales ORG, Distribution channel, Division, Districts, Talukas and Villages.
But Talukas and villages are not available in SAP standard systems.
Is it possible to use reserver field in Customer Master for this purpose?
If it is ok then please give suggestion how to use this reserve fields.
Thanks in Advance
Madhu

Hello,
the system-behavior that you describe is standard behaviour, because
the fields which you are describe (village and ..) doesn't exist in structure KOMG.
For using this field in the field catalog you can proceed like this:
1. create a new field for example ZZvillage...
2. add the new field in the table T681F for the application 'V' and the
   usage 'A'
3. add the field to the include-structure KOMKAZ
4. fill the new fields in the userexit for pricing
   (Pricing_Prepare_TKOMK (TKOMP)
I hope that the information are helpful for you.
regards
Claudia

Where to maintain Turksih translation for customer specific status?

HI gurus,
How was your New Year?
I am kindaa of stuck at maintaining translations from English to Turkish. To maintain translation e.g. For Ee grp I go to Table T501 > on the menu GOTO > Translate > select the language > enter Turkish words. but for the following the translate option is coming dim for me. I don't know if there any other place to maintain it. I am having trouble with the following:
- customer specific status Table: VV_T529U_1__AL0 or Prnl mgmt. > Pernl. admn. > Custm proc. > Create cust. Spec. status
- Marital status V_T502T or Prnl. Mgmt. > Prnl. admn. > Personal data > Personal Data > Create Marital Status
- Pay scale type V_t510A or Prsnl mgmt. > Prsnl admn> Payroll data > Basic Pay > Check Pay Scale Type
Thanks a ton,
JEss..

Hi
I was able to do the translation for customer specific status and MArital status. For this, when logging in change the language to Thai > Use Tcode SU3 > on the second tab change the language to Thai. from here, everything comes in Thai. you can easily maintain it from there using your table or through SPRO.
Thanks,
JEss..

Can I use "dvt" function for customizing the chart format in OBIEE 11g?

Hi,
".pcxml" file cannot be found in OBIEE11g. However, can I use "dvt" function for customization? If yes, how?
Reference for dvt function:
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e12418/tagdoc/dvt_pieGraph.html

Hello,
I know it's possible, because i already found some blogs about changing the chart colors and turning off the animated graphs.
<Graph visualEffects="NONE" animationDuration="0">
But we want to alter more chart options, like make a bar chart default stacked. In 10G this was possible. I think this is also
possible in 11G through the dvt-graph-skin.xml, but what i want to know is, is there a document that explains which tags you could use in this file.
It would be great to get some help on this.

ALE: how do I use dependent distribution for customer and vendor addresses?

Hello SDN'ers
Hopefully someone can help me with an ALE question.
We have two ERP systems connected with ERP - Retail and AFS.
Customers and Vendors may be created in Retail, and are distributed to AFS using DEBMAS, CREMAS and ADRMAS messages.
Not all customers and vendors are required in AFS, so we have various filters set up in the Retail distribution model (BD64).
However with the filters in place, addresses were still being distributed for customers and vendors that had been filtered out.
To try and avoid this for vendors, we created a filter group for AddressOrg.SaveReplica in receiver determination. In the filter group we selected Dependent Distribution for CREMAS (Address owner object).
This works perfectly for vendors - vendor addresses are now only distributed if the vendor itself is distributed.
However I've now discovered it is preventing any customer addresses from being sent! I was surprised about this: I expected CREMAS dependency to only affect vendor addresses. Can someone tell me:
- is this how dependent distribution is designed to work? In which case can anyone offer any suffestions to achieve the filtering some other way?
- or are we doing something wrong to be getting this result?
Thanks for any help!
regards, Roger

Hi all,
as Robert suggested, I've written an exit to get round this, although I'm surprised I should need to!
What I did was to code an enhancement in function group BDBF, at the start of subroutine COMPUTE_LOGIC_EXPRESSION.
* In the case of addresses, dependencies should only be applied for the appropriate type of address
data: lwa_tbd14 type tbd14.
if P_MODEL_DATA-FTYPE = C_FTYPE_DEPENDENCY_FROM_MESTYP.
*   Dependency from Message Type.
*   Read the Address Object type
    READ TABLE P_FILTER_VALUES
                     WITH KEY OBJTYPE = 'AD_OBJTYPE'
                     BINARY SEARCH.
    if sy-subrc = 0.
*     Check if the Message Type is linked to the Address Owner Object Type
*     (Table is buffered on DB)
      select single *
        from TBD14
        into lwa_tbd14
       where MESTYP = P_MODEL_DATA-FMESTYP
         and OBJTYP = P_FILTER_VALUES-OBJVALUE.
      if sy-subrc <> 0.
*       Wrong type of address for this dependency - stop here
        P_REPLICATE = c_true.
        exit.
      else.
*       Correct address type. Standard processing continues, checking any
*       filter values set up against the Address Owner Object Type.
      endif.
    else.
*     It isn't an address - continue with standard processing
    endif.
endif.
Let me know if this helps you, or if you know of a better way to achieve the same result.
Roger

Use Relative Path for Photoshop Action?

I have a Photoshop Action that is programmed to open an existing file located in a specific directory. The path to this directory is an absolute path, i.e.:
C:\Program Files\Photoshop Actions\filename.jpg
As long as the Action can find the file in the specified absolute path, everything works fine.
My problem is that if someone tries to run this Action on a different computer (like a Mac), the path specified in the action does not exist and the Action will not work.
The simple solution to this would be to make the action open the file located at a relative path. This way no matter what computer the action is run on, it will always be able to find the file.
Unfortunately, I don't think Photoshop Actions allow relative paths. Does anyone know if using a relative path in an action is possible?
Failing this, how would I use a Photoshop Script to somehow direct the Action to find the correct location of the file? Or is there a better solution?

The idea that I use in the xtools installer and else where is this:
1) Convert the action file to XML.
2) Package the XML file and the apps/ActionFileFromXML script with your stuff.
3) An installer script will do a 'replace' (or whatever) on the XML file so that the paths are converted to whatever is needed.
4) The new XML is saved and then converted to a .atn file which is then loaded.
There is an xtools forum at ps-scripts.com that may have some info in addition to the PDF file that comes with the package.
-X

How to use standard APIs for customized services

Hello,
I try to use IUserMappingService which has some hard coded paths to services (user mapping service). However sys admin customized the services location and it's impossible to use standard SAP libraries. For example, the standard library has a path: "com/sapportals/portal/prt/service/usermapping", but a customized path is "com/sap/portal/pdk/srv/usermapping". When I run this iView, I am getting a message: Caused by: java.lang.NoClassDefFoundError: com/sapportals/portal/prt/service/usermapping/IUserMappingService
Please advise.
Thanks,
Yan

I guess i know what the problem is. How have you given a reference to the UM service in the portalapps.xml file ??
I think you would have given the reference as "UserMapping". Now the PRT will look for this particular service and in the portalapps.xml of this service the ClassName would be defined as com.sapportals.portal.prt.service.UserMapping, which the PRT is not able to find.
You can try giving the FQN in the service reference, but i doubt it will work because the PRT will still look for the above class name at the predefined location.
Regards, Akhilesh

What goes where when using separate drives for data and applications?

Hello people!
In Mac Guru's "Guide to Macintosh Performance Acceleration" it states " Separating your "User" data from the Operating System and Applications is the simplest and most cost effective way to enjoy a significant performance boost at
minimal cost"...
Now how exactly do I do that?
I have a 40 GB HD with Panther on it and a 55 GB drive I want to use for the "data" drive. What goes where?
Thanks for reading!

Hello Danny:
Welcome to Apple discussions.
I disagree with the premise in that article - "significant" is relative and depends on where you are. The only method I am aware of to "separate" would be to create partitions. OS X uses sophisticated algorithms to manage memory - both real and virtual. There are very few good reasons to partition an internal HD - and several that suggest you should not do that - absent a "good" reason.
Barry

Using Forms 6i for Custom EBS Forms - Won't Run in Forms Builder

I'm using forms builder 6i to create custom form for ebs 11i. I started with template.fmb. When run the form using the client/server runtime, all of the app_standard calls generate errors. i have to put code in there that checks to see if it is running on the web or not. if i don't do that, the form won't run. why does it not understand the app_standard calls when it is running in client/server mode? is there something i need to change? how can i simulate an EBS environment locally so i don't have to put special code in there for running in client/server mode?

Please see if these threads help.
Steps to build New form using TEMPLATE.fmb
Re: Steps to build New form using TEMPLATE.fmb
templates for Forms
Re: templates for Forms
errors while opening template.fmb file
errors while opening template.fmb file
Thanks,
Hussein

Use iTunes music for customer DVD

Hi
A customer has asked me to edit some footage from camcorder tapes for her and put them on a DVD with some background music. The tracks she has asked for she does not have and has asked me to get them for her.
As I am only producing a single DVD for her and will get the appropriate licence in the UK from the MCPS/PRS, can I purchase the music from iTunes or should I buy the CDs.
Thanks in advance
Matt

I can buy a set of tracks from iTunes, burn them to a CD using another app, delete the purchased tracks from my Library and my hard drive, and then import them from the CD I burned, and AT THAT POINT the licensing terms for the music change because they are no longer "purchased from the iTunes store" as far as ANY technology can differentiate, but rather from a CD I own (regardless of how I came to own it)?
No, you cannot do that. The licensing you agree to when you purchase from the iTunes Store remains in effect regardless of how you are storing the tracks.
Or are you saying that DRM remains intact throughout the entire process and I'm violating terms (or the law) if I lend a CD to someone that I burned from iTunes purchases?
You are violating the terms of sale if you lend the CD to anyone else. You are also violating the law if you allow the person to keep the tracks.
If not, I stand on my statement: Purchased IS purchased... at least it is in the U.S. according to the DMCA.
Your statement is still wrong. You are contractually prohibited from using any content purchased from the iTunes Store for anything other than your own personal use. You can read the iTunes Store terms of sale for yourself (for the US, since you mention that country, but all the other stores have the same terms):
http://www.apple.com/legal/internet-services/itunes/us/terms.html#SALE
The DMCA does not come into play in this matter, this being an issue of licensing, not copyright or DRM.
Regards.

Source for Custom Action Table in SQL 2008 and above.

Up till SQL 9.0, there used to be a CustomAction table in SqlRun.msi but this file was removed in the later versions. Is this still there in any other file or is there an alternate source for pausing the install process at a certain stage?
yup

SQLrun.msi is removed from 2008 onwards but it was not used for stopping intall process as per below link it was used for starting SQL server and getting info about list of application installed
SQLmsi file
What is your requirement exactly
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
My TechNet Wiki Articles

Where is "Use F1-F12 for custom actions?"

Similar Messages

Maybe you are looking for