Where is your discussion board regarding Windows 10, having interent drops 8 times a day

Ever since I upgrade from Windows 7 to Windows 10, I have been having frequent internet connection problems.  Neatgear router is blaming it on my ISP.  ISP is blaming it on the router, I have switched cables in all different directions; i.e., modem to router only, router to laptop only, and adding another cable from router to PC.  Still having problems. Have talked to Microsoft, Neatgear and my ISP.  One of them told me that I need updates to new drivers for Windows 10. I do not know more than that, but I use my comptuer for work and I need a steady internet connection.  Any suggestions?

Hi, There are many Windows 10 foruns around such as       http://www.tenforums.com/      http://www.windows10forums.com/ I would not upgrade my main machine (I call my "production" machine) during the first week/month of ANY software release. For Windows 10, I've been testing it for many months on my test machine but still keep my two "production" machines intact. I will upgrade it, may be few months time even I don't use my machines for work. Regards.

Similar Messages

  • My Mac is slowing down and when I jump on the internet I see the rainbow ball a lot and it goes no where, I have to shut it down and try to restart several times a day?

    My Mac is slowing down and when I jump on the internet I see the rainbow ball a lot and it goes no where, I have to shut it down and try to restart several times a day?

    See if either of these help    : http://www.maclife.com/article/feature/25_ways_speed_your_mac
    http://www.macworld.com/article/151583/2010/05/spinningbeachballofdeath.html

  • Oracle Product Discussion Boards

    http://forums.oracle.com
    Appears to be where the Dev2Dev discussion boards will eventually be migrated to.
    As opposed to https://mix.oracle.com which, at first glance, appears to be just blogs.

    As per this link its not part of it or Informatica/DAC.
    http://docs.oracle.com/cd/E20490_01/bia.7963/e19039/toc.htm
    For your other question I'm not sure.
    If helps pls mark.

  • Export data from SP Discussion board

    Hi I would like to export data (topics and replies) from sharepoint discussion board to either excel or any other
    format. I can see export on discussion topics but not on replies. is there any setting i need to setup.
    Thanks

    Hi,
    You can use the existed function in SharePoint to help you to export：
    Your Discussion Boards List > actions > open with access
    》select “link to the data on the SharePoint site” > ok > export the data using the access function external data > export > excel (access 2007).
    In addition，you can also try to use connect to outlook to export data.
    Hope it is helpful!
    Seven

  • Auto numbering in Discussion Board List

    Hi All ,
    We have a requirement to auto generate number for each discussion in the Discussion board, Number should running sequence & should not repeat ever.
    initially thought of using ID field for it , But numbering is not sequential because of replies, if we add any reply to discussion , reply is using next sequential number . for example. 
    Discussion
    Replies
    ID
    Discussion 1
    1
    Discussion 1 – reply 1
    2
    Discussion 1 – reply 2
    3
    Discussion 2
    4
    Discussion 2 – Reply 1
    5
    Discussion 2 – Reply 2
    6
    But want running sequence only for discussion items as show below in New ID Field.
    Discussion
    Replies
    ID
    New ID
    Discussion 1
    1
    1
    Discussion 1 – reply 1
    2
    Discussion 1 – reply 2
    3
    Discussion 2
    4
    2
    Discussion 2 – Reply 1
    5
    Discussion 2 – Reply 2
    6
    we thought of maintaining a running number in a list, But creating a list only for storing running number felt too much..... and maintanance.
    any other simple way to achieve this requirement.
    Any suggestions on this would be helpful.
    ragava_28

    Hi
    create a separate NEW_LIST with only one column [CURRENT_ID]
    Next to your discussion board, add a workflow using SharePoint Designer, and attach to the post ( in a DB are existing 2 diff content types: post and messages ( replies ) ),and set it to start when a new post is addes
    Next in the workflow, extract value from NEW_LIST [CURRENT_ID] , add +1, replace/update the new value in NEW_LIST [CURRENT_ID] , and next also update your DB's NEW_ID column with NEW_LIST [CURRENT_ID]
    Let me know if you need more details
    Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

  • Help! my MacBookPro (Dual core Intel 2.6ghz) has begun to emulate a Windows device. Crashes serveral times a day ... sometimes several times an hour. Running 10.6.8. Any ideas?

    Help! My MacBookPro (Intel dual-core 2.6ghz) running MacOS 10.6.8 has decided to emulate a Windows device ... crashes several times a day ... sometimes even several times an hour. Also seems to be running significantly hotter. Any ideas?

    Heat can be a big problem.
    Check the S.M.A.R.T. status of the drive in Disk Utilty by highlighting the Drive & looking at the bottom of the window.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    Have you blown the dust out lately? Let it cool for an hour & see if you can get these...
    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    iStat Menus...
    http://bjango.com/mac/istatmenus/
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    Also, open console in Applications>Utilities, check the system log for the date/time of the last problem for clues.
    Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • Welcome to the Windows 7 discussion board. Please read before posting.

    Welcome to the Windows 7 discussion board.
    As above, this is a new discussion board created solely for Windows 7. I am sure many of you would be eagerly anticipating the launch on Oct 22nd. Some of you may already have questions about using existing Creative products on this operating system.
    Here are some of the Knowledge Base articles & links that you might find useful:
    Windows 7 Introduction
    Windows 7 FAQ
    Windows 7 - Driver Availability Chart
    Microsoft Windows 7 website
    Microsoft Technet
    Microsoft Developer Network

    I can understand your point of view and I respect it in regards to Small Basic being a learning language. None the less, let me make a suggestion that would be more ageeable, I think,  to different kinds of people. Why not make different versions
    of this new language: version 1 for beginners that I heard would be out by the end of this year,
    version 2 for intermediates and version 3 for more advanced programmers. All this would culminate to the Visual Basic language. These 3 versions would smoothe out the gap between SB and Visual Basic. Your new programmers would
    evolve at the same time your versions would come out and Microsoft would have a long term policy of loyal programmers. 

  • Another CRM Forum where you could discuss about your issues !!!!!

    Another SAP Forum where you could discuss about your issues and cookbooks for various SAP modules -
    http://sapcookbook.com/sapcookbook.com/forum/.
    There are plenty of users (many of them are very experienced) there as well to discuss your issues.
    The idea is not to affect SDN ,but to increase the SAP knowledge among all its users and newcomers and to help each other. Sometimes what i have seen is that people don't have access to SDN(because of several reasons), so they don't get a chance to get involved here. You can find those experts/users at SAPCOOKBOOK forums.
    Cheers,
    Gyan.
    Edited by: Gyan Prakash on Mar 5, 2008 2:12 PM

    Hello Gyan,
    can you please explain us why people don't have access to SDN? It is an open site where everyone can register.
    Regards
    Gregor

  • Another SAP  forum where you could discuss about your issues !!!

    Another CRM Forum where you could discuss about your issues and cookbooks for various SAP modules -
    http://sapcookbook.com/sapcookbook.com/forum/.
    There are plenty of users (many of them are very experienced) there as well to discuss your issues.
    The idea is not to affect SDN ,but to increase the SAP knowledge among all its users and newcomers and to help each other. Sometimes what i have seen is that people don't have access to SDN(because of several reasons), so they don't get a chance to get involved here. You can find those experts/users at SAPCOOKBOOK forums.
    Cheers,
    Gyan.

    Hello Gyan,
    can you please explain us why people don't have access to SDN? It is an open site where everyone can register.
    Regards
    Gregor

  • Same issue all over this board with HP Printer! Where did your quality go, HP?

    I have an HP Photosmart 6520 that is used to print less than 20 pages per month. Now the black ink will not print. I just spent $$$$ to replace all the cartridges and still have the same issue.  The cartridge is not clogged. I have aligned the print heads, etc. and performed all the necessary troubleshooting. I am so disappointed. 
    I have always been HP brand loyal, but when I have to buy a NEW printer since this one has obviously failed after 13 months, it WILL NOT be an HP. I also have an HP 3051A that is a cheap piece of junk. I rarely use it but it won't last long either. Cheap plastic. Where did your quality go, HP? 
    So now what? Out of warranty. Out of luck. Out $ for cartridges and a printer that should have lasted longer. 

    @angieeb 
    Thank you for using HP support forum. I have sent you a private message.  If you're not sure how to check your private messages please click here.
    Thank you,
    Omar
    I Work for HP

  • How to change the Discussion board view to facebook posting type view

    hi friends..
    i want to change the discussion board view to facebook posting type.Where multiple discussions and comments on single page as well as all the comments should be in a threaded view and also i want to find a new discussion
    link in same page.
    can any one help me...

    Hi,
    As I understand, you would like to improve discussion board to display all posts on a single page with comments.
    There is no OOB option to customize discussion board. However, there are workarounds:
    You could create a site with Blog site template, and it could meet your requirement. More information about Blog site:
    http://office.microsoft.com/en-in/sharepoint-foundation-help/create-a-blog-HA010378201.aspx
    You could use Note Board web part instead, and customize it to allow reply:
    http://social.technet.microsoft.com/Forums/en-US/f7e466ee-ab53-47c5-9dd9-232e295bca6f/sharepoint-2010-note-board-web-part?forum=sharepointgeneralprevious
    You could customize Discussion Board directly using Content Query Web Part and XSL:
    http://sharepointsolutions.com/sharepoint-help/blog/2013/04/custom-discussion-board-rollup-using-content-query-web-part-and-xsl/
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Importing to Discussion Board Post from legacy source

    Hi All,
    Im sure im not the first to wonder or ask this question but here it goes.
    We have recently moved out intranet to SharePoint 2013. We have rebuilt from the ground up using many of the out of box solutions as well as some third party apps and web parts however these is one aspect that is stumping us.
    On our old intranet we use a SQL based forum/discussion board package which has
    about ten years worth of posts, surveys, Q&As etc. As it is SQL based it is very easy for use to query and pull this legacy data however
    we cannot find a way to import into SharePoint. We do not expect to import it all but would like to import at leas the last 12 months of submitted
    data with at least basic fields like Title, description/content, tags, post date and post user. We do not mind other metadata being striped out like voting etc.
    We have dug deep into the SharePoint database files to see if we can directly insert but
    it is very complex and almost certainly not supported. We was also hoping for a discussion board data list view so we could bulk cut and paste. This is not ideal but would at least be a better option than manually inserting each post.
    Does anybody have an idea where to start if at all possible. 
    Mark

    Won't keep me logged in,
    This is a server problem. In other words, "don't adjust your dial!"
    spinning balls,
    All this means is that the rendering is slowed down by something in the design of the website. If it is a thread with over 500 posts, you probably will have difficulty viewing it, unless you have a high speed internet connection with low latency, enough hard disk space to cache the files, and/or view threads in tree mode. To use Tree mode, go to My Settings, and select Tree View under Topic Page View in the General SEttings.
    Bad Request
    Sometimes will happen if your internet service provider is behind a backbone with significant peering issues.
    So how big is your hard drive?
    How much free disk space is there?
    Have you tried to empty the browser cache?
    Does this issue happen with short threads as well as long ones?
    Do you have any system modification software such as Speed Download, PthHelmet, or other browser enhancement software?
    Are you sure all your software is known to be Snow Leopard compatible?
    See these two pages about compatibility:
    http://snowleopard.wikidot.com/
    http://www.macintouch.com/specialreports/snowleopard/slcompat.html

  • How to find sum of Discussions Initiated by a user in Discussion Board List

    Hi
    I am working on SharePoint Online.
    We have used Discussion Board List for discussions on our site. In that list permitted users can initiate as many discussions as they want.
    My question is: In SP ONLINE, Can we come to know sum of how many discussions have been initiated by different users OOB or by using calculated column or by any other means without custom code.
    For eg: User X has initiated :
    DIscussion A
    Discussion B
    And User Y
    Discussion C
    So what I want is
    UserName        Discussions Initiated
    X                                       2
    Y                                       1
    Is this possible OOB. If not, Can you please help in implementing it by custom code on SP Online.
    Regards
    Vikrant Kaushal

    Hi vikrant,
    According to your description, my understanding is that you want to display the sum of the discussions that a user created in SharePoint Online.
    There is an OOB view ‘Management’, it displays all discussions that all users created. You can group by the view using ‘Created By’, then it will display the sum of discussions that a user created.
    You can do as:  click List->Current View, switch current view to Management view, then click ‘Modify View’. Scroll to ‘Group By’ section and expand it, under ‘First group by the column’, select ‘Created By’, click OK.
    The result is like:
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

    1. HP Pavilion dm4 XO132AV
    2. Windows 7 64-bit
    3. No error message
    4. No changes were made prior to when the issue occured
    5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, restart the notebook and let Windows fully load.  Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Discussion board subject links to replies

    We have discussion boards on Sharepoint 2013. When you use Management view (or any other custom view) all subject columns are not linking to items themselves, but list of replies instead (if there no replies, it's not showing anything).
    Why is this and how could I fix it? I would like to see the item itself when clicking the subject.

    Hi Kati,
    According to your description, my understanding is that you want to make the subject to link to the item itself in Management view in Discussion Board list.
    The Management view is the view for Admins to see the Reply statistics for this discussion.
    If we click a subject in this view, it will go to the management view of the subject; And if we click a reply, it will go to the reply item view page.
    As we need to get all the replies for the discussion in the Management view, so it is by design that if we click a subject in the Management view, then it will go to the Management view of this discussion.
    So if you want to view the subject in Management view, then I recommend to click the View Item button in the ribbon to view the subject.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

Maybe you are looking for

  • Closing iTunes Concerns

    Hello, Just recently, when I close the iTunes application, I am getting an error report request. While the computer is saving the library I get the message, iTunes has encountered a problem.... When I go to what the error report contains it is this..

  • Export and Import of Queries

    Hello Experts, I wish to copy some queries from a production system to a development system for backup and QA. It seems to be a way to do so by export XML files, and then import them to the second system. Unfortunately, when trying to import the xml

  • Issue in MRP re-order point

    Hello SAP experts, hope you are well, i have i question, if i have implemented a reorder point planning in my materials is there a way that the planner can get an e-mail or notification that any of his materials has gone bellow the reorderpoint?? so

  • Looking for a PP or Open Office template, does anybody know where to find t

    long ago, I found a free template with the following background. http://img411.imageshack.us/content_round.php?page=done&l=img411/2770/screenshot 20100218at115.png&via=mupload for the title slide and http://img192.imageshack.us/content_round.php?page

  • Page Conflict - SAN/NAS

    Hi, I want to know whether a page conflict will occur when one thread is reading a read-only database but there are other threads which are "adding" (only) data to the same database and another write-only database - IF I put the data on a SAN/NAS. I